Recently, I updated my Realme C2 from Colour OS to Realme UI. After the update, I am unable to access Fastboot. Powering on the phone with the volume down button freezes the phone while it shows "=> FASTBOOT MODE" at the bottom. The only way to reboot the phone is to hold power+volume up. Let me be clear, the phone does boot into Realme UI when powering on normally.
Anyone?
Never mind. It mysteriously started working
Related
Hi guys, today i download the last one plus 3 Oxygen OS version and installed on my phone, after the installation the phones starts the reboot process and it got stucked on the fastboot mode, if a press the power button it goes to the fastboot mode, if i press volume up + power goes to the same mode and exactly the same with volume down + power, what can i do to fix this or even better, is it fixable? I don´t want to change phones again
Link only Indian models
Caution may brick your phone
https://download.c.realme.com/osupdate/RMX1921EX_11_OTA_1010_all_yuEH87qmmZhw.ozip
This update was stopped by realme because of damaged phones - do you really think it's a good idea to post that link?
About the Bugs
i have read on twitter, that this update still has plenty of Bugs
i there anybody willing to give the list of the Bugs?
Realme ST bootloop after update to realme UI V1.0
Mottalib Saju
2020.02.12 07:37:49
33 Views
3
0
Follow
from this site I have download the realme UI V1.0 in phone storage download folder. Then I followed this stape - 2. for the Recovery Mode which is mentioned that site.
I power off the phone. I Pressed and hold the Power and Volume Down buttons, until your phone enters Recovery Mode. Choose the language English. then clicked on the firmware and confirm to update. But after that phone goes to boot loop, only showing realme logo and some seconds later again restarting the phone. even it is not going fastboot mode by Pressing and hold the Power and Volume Down buttons.
At this moment what should I do. Even tried to go fast boot mode by pressing volume+, volume - and power button. please give me the solution for Realme XT.
chiru369 said:
Realme ST bootloop after update to realme UI V1.0
Mottalib Saju
2020.02.12 07:37:49
33 Views
3
0
Follow
from this site I have download the realme UI V1.0 in phone storage download folder. Then I followed this stape - 2. for the Recovery Mode which is mentioned that site.
I power off the phone. I Pressed and hold the Power and Volume Down buttons, until your phone enters Recovery Mode. Choose the language English. then clicked on the firmware and confirm to update. But after that phone goes to boot loop, only showing realme logo and some seconds later again restarting the phone. even it is not going fastboot mode by Pressing and hold the Power and Volume Down buttons.
At this moment what should I do. Even tried to go fast boot mode by pressing volume+, volume - and power button. please give me the solution for Realme XT.
Click to expand...
Click to collapse
Don't trust these kind of updates.. you can go into fastboot just pressing power button and volume down button.. then flash twrp and then orangefox download the latest update from the realme site. Reminder only orangefox can flash ozip files as I know. If it boots into recovery again after you wipe data and restart phone. then wipe data again then it should hopefully boot.
Hello! i don't know how but my rooted Mi A3 last night decided on its own to update to Android 10. So i woke up with all of mine Magisk magic all gone. I tried to root again but my phone is stuck on the 'Mi' boot screen.
So here's the situation:
if i press volume up + power button, instead of entering recovery mode the "no Command" screen shows up;
if i try to fastboot, my pc doesn't recognize anymore my device;
There is any another way to enter recovery mode? Can i flash a boot image on a sd card? Do i have to throw away my beloved xiaomi?
You have most probably incompatible Magisk module which prevents phone from booting Android 10. Flash stock boot image to get phone working (fastboot should work, double check your drivers etc.).
Or perform factory reset from stock recovery:
"If presented with an image of a broken Android with "No Command" shown on the screen, do the following:
- Press and hold the Power button.
- While holding the Power button press the Volume Up button then release the Volume Up button then the Power button."
Hello! I changed my screen ystd, and in the process somehow bricked my phone (?!)
Now my poco f1 won't turn on.. so i tried all the hard resets (vol+power) and nothing. When I charge it up with power brick or my pc, it boots into charging mode but nothing else. When i try booting it up it normally or fast boot or recovery again nothing happens, only charging logo. The charging logo stays on for about 3 second and then disappears. When I unplug the phone, it reappears for about a second and disappears;
I am on pixel experience (android 11 latest) . Also when i connect it to the pc the same issue happens (charging screen) and it shows in device manager as portable devices E:/ . It does not show in adb devices.
I found a thread with the same issue : https://forum.xda-developers.com/t/poco-f1-stuck-on-charging-logo.4031591/ , and someone commented that "Bootloader and recovery partition might have corrupted." What can I do about this? Is EDL flash the only option left? THanks!
in case anyone see this in the future, i was an idiot, while removing volume button and power button ribbon, i made a tear in it, the power button was simply unusable.
to boot it up, i pressed power up while connected to power source which launched into twrp
sm-t870 unlocked/rooted stuck in bootloop
cannot enter recovery or download mode, or even seem to shut the tablet completely off.
any combination of buttons turns the tablet on with the message "bootloader is unlocked press power key to continue"
so holding power+volUP, must be let go to press power which seems to interrupt the button combination
power+volDOWN seems to shut the tablet off for 5 seconds but it automatically turns back on.
having plugged into laptop seems to make no difference.
help!
Hi man, have you fixed this issue? I'm having the exact same problems as yours. I updated my Magisk it just went bootloop.
Thanks!
Plug into PC then Power+Volume Up got me into recovery mode