Does anyone here suffer from this kind of problem ? i noticed that even i did not touch my power button but somehow the power menu appear , say to emergency,reboot and shutdown. in my current situation , the screen is cracked from top right corner and its spread to power button a little bit. So i do not know how , whether should i go check with technician on authorized mi center or wait for other opinion here ? another test that i made is to format data and changing rom , from official miui 13.0.10 to pixelOS , the problem still occur. might be hardware problem????
If stock ROM does this, it seems to be a hardware issue
Bro is the power button, You have you press it hard a few times
Related
I have purchased second hand galaxy S2 I9100.
I am experience LCD problem from the start. First w botton on horizontal arrangment not working.
I tried *#0*# test code for LCD and found one column from top to bottom not working.
Now LCD is behaving strange after i remove the screen protector. It goes to automatic selection in the middle of screen after some time of use e.g it automatically got selecting every thing which is on middle left of screen
I talked to some of my friends and they think it is a software issue.
I have tried flashing it with different ROMs using ODIN but no improvement results
It also go to downloading mode by only selecting volume down during power on.
Please help as I am not getting anything for solution
If that's happening with every rom you've tried (I presume you've gone back to stock firmware to test as well ?), then that's a hardware problem.
Home key Download mode
Yes I have also tried stock firmware of my model.
I have one more question. My Samsung galaxy S2 goes to download mode by pressing power and volume down button only e.g without pressing home key button. My home key button function properly at the android home.
I that also some issue with the hardware?
Try flashing the XWKL1 fw.. It pretty much fixed mine
Sent from my GT-I9100 using xda premium
MistahBungle said:
If that's happening with every rom you've tried (I presume you've gone back to stock firmware to test as well ?), then that's a hardware problem.
Click to expand...
Click to collapse
Yes I have also tried stock firmware of my model.
I have one more question. My Samsung galaxy S2 goes to download mode by pressing power and volume down button only e.g without pressing home key button. My home key button function properly at the android home.
I that also some issue with the hardware?
If its still under warranty get the screen replaced. I did.
I.lost a whole collumn and wasn't too stressed about it but before long another collumn went. I expect more would have followed so better to get it replaced at their cost not ours.
----------------------
GTI9100
Hydra H2O 1.2.1
fluxi xx.01_rc5
Hello,
When I press the standby button on my X10, my screen goes black, which is normal. Lately, my screen goes black but immediately after that it returns to the lock screen, and I have to press it twice or more to get it black.
Is this software or hardware related and how can I solve this? Running Wolfbreak's ROM and Doomkernel V6. Running Wolf for about a year now and suddenly this problem starts showing up.
Hi,
its complicated, because might be both. If you used power button very often and/or your X10i is older it might be hardware issue.
I recommend you try different rom first and try it. If it would be the same, then replacement of power button should be the last fix . In that case I might help you with that.
kr1st0f1 said:
Hello,
When I press the standby button on my X10, my screen goes black, which is normal. Lately, my screen goes black but immediately after that it returns to the lock screen, and I have to press it twice or more to get it black.
Is this software or hardware related and how can I solve this? Running Wolfbreak's ROM and Doomkernel V6. Running Wolf for about a year now and suddenly this problem starts showing up.
Click to expand...
Click to collapse
Seems like I fixed the problem by wiping cache and dalvik cache. I'm not sure which one actually solved it. So it was software related.
Thanks for the help anyway!
Hello, I have a problem with my Sk17i, the screen is not working, I do not know if it is hardware problem or system problem, pressing the power button the phone vibrates, lights up the screen but does not give image, is charging also normally, turns the Flash light when charging, but there is no picture, stay in black screen, when I press the home button the screen turns on but no image, a technician in support told me it was something like the problem of the motherboard for upgrade to ICS (but it was ICS from three months ago), so I think that's not the problem, any suggestions of what could be or a possible solution
I really are appreciate your help.
Pd.- sorry for the bad english, is a traduction from google xD
Pd2.- the phone have Lock bootloader
Androidx10rky said:
Hello, I have a problem with my Sk17i, the screen is not working, I do not know if it is hardware problem or system problem, pressing the power button the phone vibrates, lights up the screen but does not give image, is charging also normally, turns the Flash light when charging, but there is no picture, stay in black screen, when I press the home button the screen turns on but no image, a technician in support told me it was something like the problem of the motherboard for upgrade to ICS (but it was ICS from three months ago), so I think that's not the problem, any suggestions of what could be or a possible solution
I really are appreciate your help.
Pd.- sorry for the bad english, is a traduction from google xD
Pd2.- the phone have Lock bootloader
Click to expand...
Click to collapse
You couldn't have done any fatal damage since you still have locked BL (except probably hardware-based).
Why not try repairing with SEUS (Sony Ericsson update service) or PC companion?
Androidx10rky said:
Hello, I have a problem with my Sk17i, the screen is not working, I do not know if it is hardware problem or system problem, pressing the power button the phone vibrates, lights up the screen but does not give image, is charging also normally, turns the Flash light when charging, but there is no picture, stay in black screen, when I press the home button the screen turns on but no image, a technician in support told me it was something like the problem of the motherboard for upgrade to ICS (but it was ICS from three months ago), so I think that's not the problem, any suggestions of what could be or a possible solution
I really are appreciate your help.
Pd.- sorry for the bad english, is a traduction from google xD
Pd2.- the phone have Lock bootloader
Click to expand...
Click to collapse
Do a repair using Sony update service (SUS).You will get it on sony's official site.
Hi
Connect your phone to PC, start adb and with catlog see what happens in your boot.
The Capactive Touch buttons on Galaxy S2 does NOT dim or goes out automatically & rather radiates a strong touch screen light,even after the "Touch Key Light duration is altered to various intervals (1.5 sec or 6sec)" . The two Touch light only goes off with the Phone's Screen timeout or manually (pressing the power button) .
It was never like this till last week when the Octa-LCD inside my SGS2 broke & today when i changed the complete display assembly of the SGS2, i got to take note of this peculiar & harassing problem only now..which is eating up my mind.What's happening &why? Was the Screen replacement Not correctly carried out (done at my Authorised Samsung Service Centre) HARDWARE problem or is it due to any Software issues? (Samsung Service Centre did say that they did no software job,only just a screen replacement i.e a Hardware job on my SGS2)
i'm Rooted, on JB 4.1.2, Stock Rom with Siyah Kernel !
Though Samsung have offered me to replace my screen for a second time in a few days ( they dont have any more stock of the SGS2 scrren at this branch), but i myself NOT Sure..what's causing the problem ? (Everything in my SGS2 is running fine except this stressful quirk which was Not there before).
.'m at a fix ,please Help me with your advices ASAP !!!!
Have you tried flashing a different kernel like Apolo kernel 4.15b or try an older version of siyah kernel 6.0beta4.
I don't really think it is software problem if it was working perfectly fine before.
HELP my SGS2 !
Thanks @gsstudios for the good advice !
...but is there any app/mod for the SGS2 that can control the capacitive buttons light settings, other than the system settings for the SGS2 like the one> Galaxy Button Lights https://play.google.com/store/apps/details?id=com.notquiteinsane.galaxybuttonlights&hl=en (works for SGS6 but not in SGS2)
I'm Not quite a Flashholic,neither do i get much time to tinker around ..so any other quicker way,except flashing a different rom, to control the light settings?
* 1 important thing Maybe ...when my Phone with the "New" screen was booted for the first time, the "developer options" & "adb debugging" were left enabled by me ( to backup my contacts , messages,etc) Could this have any detrimental effect on the capactive button light settings? I have thereafter disabled/enabled those options & rebooted the phone many times but nothing simply changes !
Btw, if all other functions of the phone is Ok ( i checked the phone's sensors with CPU-Z & everything was running fine) & the Screen touch response seems perfectly ok ,then also can this capactive button quirk be the result of Hardware manfunctioning /defect arising from the very New replaced Samsung Octa LCD itself? // I did not install any new apps, nor me,nor "Samsung Service Center" did anything on the Software part of my SGS2 recently //
Currently, only two options for those Capacitive button key lights work :1) always on & 2) always off & i have opted for choice 2 to save the distraction from the glaring/disturbing light of the capactive buttons & mainly to save some battery power !
So,if any body else have a great idea to fix the light quick , i would be immensely thankful to all !
i think u should reflash stock firmware and see if that fixes it.
yeah, Zyfloss, as you said it & i also similarly thought...i reckon the problem has been solved as of now with thë flashing of the SGS2 official Stock JB 4.1.2 Rom,the capacitive lights now seems to be working normal,timing out automatically after 1.5 sec or 6 sec as i want it ! Anyway, Thanks to Everyone who saw my post, tried to help & replied ! :good:
Hey guys, since a few days my navigation keys get pressed autkmatically. It's like Id be bashing with my finger tips on the menu and home keys.
Maybe the cause is that a drop of rain that damaged something there. I can't tell. I think it's hardware related since the problem persists in safe mode and no viruses were found.
When i keep the defective buttons pressed i can mostly surpress this behavior.
What do u think?
Will changing the display resolve the problem when the problem is corrosion/water damage?
I get this error, and also the screen auto click while charging the phone, maybe wrong charger or battery?