Hello
I bought a new mainboard but there is only "factory binary" mode.
Can I upload a new firmware ?
Related
Hello
i put my cloesed my phone and put it on charge and tried to open it next day and it didnt open. Logo of samsung is flashing.. My phone is GT-I9300 sim unlocked and dont know what carrier it is.. I tried kies software it showed " update is not required" . but i have noticed that by putting phones s/n number kies software showed my phone is TMU which is United Kingdom T-mobile . after i tried odin and found firmeware for TMU from sammobile. it failed and showed "There is no partition".What should i do now ?
Try the rescue firmware from general forum, flash with Odin. But sounds like the emmc chip is damaged, new motherboard required.
Hello Everyone!
Today I received an SG-S III (GT-I9300) TMH-locked phone from my friend. No root detected.
Exactly I don't know the story of reason of errors.
Came to hand sympthoms: no network, bad IMEI number (004999...), no S/N and a very weird black/yellow square at home screen with some datas of the phone. (see the attached file, please). Steps as repairing as follows:
1., New MODEM via ODIN (XXLF5_REV02_CL1147871). Nothing happened, same problems here.
2., New complete SW via ODIN (XXALF5/TMHALF1/XXLF5). Nothing.
3., nv_data manipulation (posted method here: http://forum.xda-developers.com/galaxy-s3/help/how-to-repair-imei-gt-i9300-t1845660/page4). Nothing.
4., Complete S/N and IMEI writing with Chimera. This was successful. Now IMEI and S/N is OK. But: no network! (Can't register on network).
5., Complete new original SAMSUNG firmware. IMEI and S/N henceforward OK, but no signal. And the weird square is still here after the complete boot.
6., Disassembled, hardware tested...nothing unusual at first look.
I haven't got more ideas. What can I do so far?
Any good ideas, tips, crotchets?
Thank you in anticipation for any/odd ideas.
Search factory mode
Hello.
I got a c5000 stuck at logo and even doesnt enter to recovery mode ,(POSSIBLE REASON: FAULTY ROOT TRY) so i go to SamMobile and downloaded latest firmware
After that phone bootup normally but with no Baseband ,
So i told my self maybe there is another firmware with higher modem then i saw too types of firmware
C5000ZCU1AQA1 and C5000ZHU1API2
Both are the latest , i flashed them both but still no Baseband ?!
The phone is 7 days old and it has no warranty in middle east ,
Please some one can help to provide the proper firmware for this model
Some info on back cover of phone
SM-C5000
SKU: SM-C5000EDACHC
IMEI 353288081873550
S/N: R28HB12W3RE
------------------------
THANX IN ADVANCE
Hello guys,
Received a samsung galaxy tab S 10.5 from a friend with broken motherboard. Switched the board with one bought in China. Works perfect , but there was a test firmware installed on the board (PDA FA44_T800XXU0AND6). I don't manage to install the stock samsung firmware, everytime FAIL message at system.img (see pic 2) in Odin for firmwares of BTU or France . I don't know the serial number or the origin country of the new motherboard so can't recover via Kies or Smart Switch. Tried with the S/N of the pervious motherboard and at the moment of download to the device it fails.. No only acces to download mode, message of failed software update when I boot up normally..
Anyone any ideas on how to solve this problem? I'm running out of options..
Can I determine the S/N of my motherboard when only having acces to download mode?
Thanks a lot in advance for any advice or help
[Solved]
Hello, im looking for help with the device MT6757 Blackview a80 Pro, i am in a bootloop after flashing twrp and then the boot.img. I'm not sure what happened but at this point i dont know what im doing
The IMEI sticker Model says A91s(20)
I went to Imei.info first to identify the phone like i always do and the name above is what came up but this is where i bought the phone:
https://www.wish.com/product/5ee1d03a1f665e34c259543f?hide_login_modal=true&from_ad=goog_shopping&_display_country_code=US&_force_currency_code=USD&pid=googleadwords_int&c=%7BcampaignId%7D&ad_cid=5ee1d03a1f665e34c259543f&ad_cc=US&ad_lang=EN&ad_curr=USD&ad_price=66.26&campaign_id=8701430383&retargeting=true&gclid=Cj0KCQjwpNr4BRDYARIsAADIx9yvT1qm2sgr07EDjsk1FRA2qIxwiaOK7tKVL8jrfRTFM4FN_YKzJbMaAjewEALw_wcB&share=web
from what i saw the device looked like a samsung clone and it displayed dis in the system about phone( i forget where) alps.L1.MP6.V2_WEG.L_P73 202
The device and the name on imei.info doesn't match the device i bought and i think because of that my phone is soft bricked. If i could get any kind of help or understanding to fix this, id greatly appreciate it!
Firmware file i downloaded and took the img files: https://www.getdroidtips.com/stock-rom-blackview-a80-pro/
TWRP i flashed: https://unofficialtwrp.com/blackview-a80-pro-root-twrp/#Download_Files
i also got as far with the SP flash tool as i could but i kept getting errors, including those in screenshots.