Hey Guys;
A month ago my phone died on me. After a 1 month hassle of the company trying to dodge doing repair the phone on the warranty, they finally gave up.
They replaced the motherboard and when I got it, it gave me zero bars and no network. I took it back and they returned back with a different rom but it was working. The first was some samsung s3 in arabic version rom. The second was a chinese samsung s3 rom. Since I couldn't get arabic keyboard I decided to flash super nexus rom but now I have zero bars and no network showing.
The hardware specs are in the attachments.
Any idea how to fix it?
Stock reply
IMEI correct
Modem correct
CSC correct ??
See multiple identical posts .
jje
Imei: unknown
Imei sv: unknown
Baseband: unknown
Can't find PDA, CSC and modem?
Looking at different posts. Tried Ariza patch didn't work. Am assuming I only need to set the imei to get a network. But what am I to set it to?
sub-80 said:
Imei: unknown
Imei sv: unknown
Baseband: unknown
Can't find PDA, CSC and modem?
Looking at different posts. Tried Ariza patch didn't work. Am assuming I only need to set the imei to get a network. But what am I to set it to?
Click to expand...
Click to collapse
You cannot set an IMEI .
You either have a backed up EFS folder you can restore or its a service center repair .
Can't find PDA, CSC and modem? either you are clueless or its more than just IMEI is a problem .
Suggest you flash a stock rom for your area via odin from sammobile.com .
Fails then its a service centre .
jje
JJEgan said:
You cannot set an IMEI .
You either have a backed up EFS folder you can restore or its a service center repair .
Can't find PDA, CSC and modem? either you are clueless or its more than just IMEI is a problem .
Suggest you flash a stock rom for your area via odin from sammobile.com .
Fails then its a service centre .
jje
Click to expand...
Click to collapse
I am a bit clueless, nut when I had the S3 before it died and had its motherboard replaced. I would press *#1234# to get the pda and modem and csc or you can get them in the about area. But now with the super nexus rom if i press the code it gives " no mobile network" and it does not show in the about area.
I didn't back up the EFS. This problem was present as I said before when I got it back from the in the service center they had a rooted middle east stock rom and it showed no service, they took it back, I thought the reason was loose wiring. And when I got it back it had a rooted Chinese stock rom which was able to connect to the network. The previous Original motherboard had an unrooted African stock rom, they also cheated me by giving me a 16gb motherboard instead of 32gb.
Tried to flash chinese stock rom via odin and got fail. now it will only go to download mode anything less it gives a yellow triangle.
You need a service centre but you have no warranty .
jje
Got it fixed. :laugh:
First Flashed Samsung i9300 stock rom 4.0.4 from http://samsung-s3.com/restoring-sto...ware-build-xxalf2-samsung-galaxy-s3-gt-i9300/ (I had 4.0.4 when I bought the phone.)
root the device via Framaroot 1.4.1. apk (http://forum.xda-developers.com/showthread.php?t=2130276)
Installed busybox via busyboxinstaller.apk in google play and installed busybox
last installed ARIZAPatch.apk can be found in xda developers forum and make sure you are connected to the wifi and press the V[0,5] button. Your device will reboot and there will be light.
Hello
i put my cloesed my phone and put it on charge and tried to open it next day and it didnt open. Logo of samsung is flashing.. My phone is GT-I9300 sim unlocked and dont know what carrier it is.. I tried kies software it showed " update is not required" . but i have noticed that by putting phones s/n number kies software showed my phone is TMU which is United Kingdom T-mobile . after i tried odin and found firmeware for TMU from sammobile. it failed and showed "There is no partition".What should i do now ?
Try the rescue firmware from general forum, flash with Odin. But sounds like the emmc chip is damaged, new motherboard required.
Sir
MY SamsungI9100 Fcc id A3LGTI900 serial numbr starts with RV1. the phone was power off .i tried aINU firmware (i am in INDIA) .Bu now "UP GRADED ENCOUNETERED AN ISSUE CONNECT with KIES.While i was connect with kies"it DOES NOT SUPPORT.(The phone purchased from SINGAPORE).So i tried with differnt firmwares (DXLP9,DXLCD,XXK19, and KOREAN ROMIC 808) with ODIN but it stops with NAND WRITE. And also tried in Z3PRO .
PLS GIVE THE SOLUTION
Hello.
I got a c5000 stuck at logo and even doesnt enter to recovery mode ,(POSSIBLE REASON: FAULTY ROOT TRY) so i go to SamMobile and downloaded latest firmware
After that phone bootup normally but with no Baseband ,
So i told my self maybe there is another firmware with higher modem then i saw too types of firmware
C5000ZCU1AQA1 and C5000ZHU1API2
Both are the latest , i flashed them both but still no Baseband ?!
The phone is 7 days old and it has no warranty in middle east ,
Please some one can help to provide the proper firmware for this model
Some info on back cover of phone
SM-C5000
SKU: SM-C5000EDACHC
IMEI 353288081873550
S/N: R28HB12W3RE
------------------------
THANX IN ADVANCE
Recently I have buy an unlocked galaxy note 5 n920f running 5.1.1 and OTA update won’t work. But here is the problem when I opened the recovery mode the phone is listed as a Sm-n920Sk (Korean version) and when I go to Odin mode the phone is a Sm-920S(Korean version). Now that I want to update my phone to the latest software which version of the rom should I download the n920f, n920Sk or n920S
I’m very confuse right now even the ussd code won’t run.
I need help
Hi m send me private imei number and SN number , probably someones had done some corection of firmware to show like European Version n920f.