Sir
MY SamsungI9100 Fcc id A3LGTI900 serial numbr starts with RV1. the phone was power off .i tried aINU firmware (i am in INDIA) .Bu now "UP GRADED ENCOUNETERED AN ISSUE CONNECT with KIES.While i was connect with kies"it DOES NOT SUPPORT.(The phone purchased from SINGAPORE).So i tried with differnt firmwares (DXLP9,DXLCD,XXK19, and KOREAN ROMIC 808) with ODIN but it stops with NAND WRITE. And also tried in Z3PRO .
PLS GIVE THE SOLUTION
Related
Hello
i put my cloesed my phone and put it on charge and tried to open it next day and it didnt open. Logo of samsung is flashing.. My phone is GT-I9300 sim unlocked and dont know what carrier it is.. I tried kies software it showed " update is not required" . but i have noticed that by putting phones s/n number kies software showed my phone is TMU which is United Kingdom T-mobile . after i tried odin and found firmeware for TMU from sammobile. it failed and showed "There is no partition".What should i do now ?
Try the rescue firmware from general forum, flash with Odin. But sounds like the emmc chip is damaged, new motherboard required.
Hi Android Gods. I have GT-I9300 International version Samsung Galaxy SIII. I started getting " Not Registered on the network " error, I have used Kies to "Upgrade Firmware and initialisation" to Android 4.3 version. Bujt this too did not resove my problem. The IMEI number is correct. The serial number seems different in the device information. Kindly help...
Your efs has been modified or damaged. Try a patched modern and kernel together to restore connection.
Hello Guys. I have a SAMSUNG (WCDMA) galaxy S II GT i9100 (CMIIT ID: 2011CP2751)
Is from Koreea, original device. I rooted this phone using odin, i flashed a european firmware, because on his original firmware i had restrition on apps. Recently, i gave him hard reset (wipe data factory reset, wipe cache) and after rebooting,he shows me the steps for configuration (language, wifi, samsung account, etc) and at this time it rebooting and is stuck on samsung logo. Now i have to flash again but i don t know baseband version. I downloaded a firmware and shows me FAIL when i flashed with odin. I need this baseband version. Cand i find if i know the IMEI ? or can anybody help me?
I think you can find 'the best match' using chimera software which has sort of a firmware search for your phone's serial (11 characters long).
Your phone serial should be under your battery, somewhere near the IMEI.
If you want to use chimera, after you've registered, logged into the software and all that annoying stuff connect your phone, and after it gets recognized go to "Firmware Update" and complete the "serial number" field press "Autodetect latest" and it should give your some sort of a match. At least that worked for me.
Or PM me with the serial if you want to skip all the registering stuff because I already have a working account.
Hello guys,
Received a samsung galaxy tab S 10.5 from a friend with broken motherboard. Switched the board with one bought in China. Works perfect , but there was a test firmware installed on the board (PDA FA44_T800XXU0AND6). I don't manage to install the stock samsung firmware, everytime FAIL message at system.img (see pic 2) in Odin for firmwares of BTU or France . I don't know the serial number or the origin country of the new motherboard so can't recover via Kies or Smart Switch. Tried with the S/N of the pervious motherboard and at the moment of download to the device it fails.. No only acces to download mode, message of failed software update when I boot up normally..
Anyone any ideas on how to solve this problem? I'm running out of options..
Can I determine the S/N of my motherboard when only having acces to download mode?
Thanks a lot in advance for any advice or help
Hi,
So I tried rooting my Samaung Galaxy Grand Prime+ (SM-G532F/DS) but it failed and now it won't turn on. I can go to download mode and that's it. No recovery mode. When I turn it on it gives a message "An error has occured while updating the device software. Use the emergency recovery function in the Smart Switch PC app."
I tried Smart Switch but the problem is it does not accept my phone model name [SM-G532F/DS] however if I change it to SM-G532F without /DS it will continue to ask my S/N but when I type it in and hit ok it asks me to check my model name and s/n. What can I do?
And after reading on and on about "soft brick" and failed root attempts I found out that I can manually flash firmware to fix the soft brick issue. But it still has some problems, I don't know where and how to choose the right firmware, and how to install it.
tl;dr Smart switch doesn't accept my phone model name and s/n. And I don't know how to choose the right firmware to flash using odin.
What I have:
Access to pc.
Samsung drivers are installed.
My phone's model name and serial number.
I enabled developer mode in the settings before it was bricked and turned on oem unlock and usb debugging so theoritically it should still be available.
What I know:
Smart Switch does not accept my phone's model name with serial number. So it won't work.
Android version: 6.0.1
It was Saudi Arabian variant, bought from saudi.
What I don't know:
How to choose the correct firmware to be used with odin.
My phone software details.
Any help will be appreciated. Thank you.
MODEL: SM-G532F/DS
SSN: -G532F/DSGSMH
FCC ID: A3LSMG532F
Help me choose the right firmware please.