Hello all,
I have bought Media pad x1 501-u, unfortunately I updated it to Kitkat from there website, then my mobile turned into chinese and no google firmwork so I cant even sync my gmail contacts using gmail, I cant update my programs using playstore. and what is worse is that there is no arabic!! its my native language and I need help! PS: my mobile is not rooted.
what is the best solution??
501U is natively a chinese device = was never meant to be sold outside China.
Standard procedure with Huawei:
Download the ROM (Either from Huawei or EMUI), unzip and copy the dload folder onto the root directory of an SD Card of at least 2GB formatted in FAT32.
Power off the X1, insert card, power on also holding volume up (if not successful hold volume up&down). You know you did it right when mister droid shows up.
Screen may blank for long periods!!
When it reboots after showing update success, remove the SD card, or it will do it again.
To get google back you will have to download several apps from the Huawei store which is available on tge homescreen. Please refer to the thread "not synching Google contacts".
mru55 said:
501U is natively a chinese device = was never meant to be sold outside China.
Standard procedure with Huawei:
Download the ROM (Either from Huawei or EMUI), unzip and copy the dload folder onto the root directory of an SD Card of at least 2GB formatted in FAT32.
Power off the X1, insert card, power on also holding volume up (if not successful hold volume up&down). You know you did it right when mister droid shows up.
Screen may blank for long periods!!
When it reboots after showing update success, remove the SD card, or it will do it again.
To get google back you will have to download several apps from the Huawei store which is available on tge homescreen. Please refer to the thread "not synching Google contacts".
Click to expand...
Click to collapse
Which ROM?? I have already download kitkat rom from their website and this what caused the problem. when i bought this device it was jelly bean and has google framework and no chinese .. and the arabic language was working.
after the kitkat update, I encountered all those problems.
[7D-501u]KitKat 4.4.2 / EMUI 3.0 / 400 DPI
http://forum.xda-developers.com/hua...-kitkat-4-4-2-emui-3-0-400-dpi-t2925015/page2
Work
eennap said:
[7D-501u]KitKat 4.4.2 / EMUI 3.0 / 400 DPI
http://forum.xda-developers.com/hua...-kitkat-4-4-2-emui-3-0-400-dpi-t2925015/page2
Work
Click to expand...
Click to collapse
I downloaded this file to my SD card. its only one file named "update" and my tablet is not recognizing it. I mean when i restart or make local update my tablet doesnt show anything. something wrong? did I miss any step?
Elnoumeno said:
I downloaded this file to my SD card. its only one file named "update" and my tablet is not recognizing it. I mean when i restart or make local update my tablet doesnt show anything. something wrong? did I miss any step?
Click to expand...
Click to collapse
Hi,
Apart from the update.app file, you also have to download the attached file (only 9xx bytes) in the below post:
http://forum.xda-developers.com/showpost.php?p=56436713&postcount=6
extract it to your root microsd card, then put the "update.app" file in the dload folder; reboot your x1 or make local update (have to manually choose the file from external sd card). After successfully upgrading, don't forget to remove your microsd card and plug to your PC to delete the update files.
Once you successfully upgrade it to this kitkat, you will not have any goggle app/framework. You have to go to Huawei App Center. search for and download Google Play and Google Play service. Then, in the same Huawei App Center, search by typing "google", you will see a large google banner on the top of the search result, tap it and you'll see a lot of google stuff. At least you have to download google sync (look at calendar icon) and another google sync (look at contact icon). Once downloaded, you will be able to sync your google contact and calendar back. You can then download other google apps from Google Playstore.
bthoven said:
Hi,
Apart from the update.app file, you also have to download the attached file (only 9xx bytes) in the below post:
http://forum.xda-developers.com/showpost.php?p=56436713&postcount=6
extract it to your root microsd card, then put the "update.app" file in the dload folder; reboot your x1 or make local update (have to manually choose the file from external sd card). After successfully upgrading, don't forget to remove your microsd card and plug to your PC to delete the update files.
Once you successfully upgrade it to this kitkat, you will not have any goggle app/framework. You have to go to Huawei App Center. search for and download Google Play and Google Play service. Then, in the same Huawei App Center, search by typing "google", you will see a large google banner on the top of the search result, tap it and you'll see a lot of google stuff. At least you have to download google sync (look at calendar icon) and another google sync (look at contact icon). Once downloaded, you will be able to sync your google contact and calendar back. You can then download other google apps from Google Playstore.
Click to expand...
Click to collapse
Its working but its chinese, how can i choose another language. I am lost
when you first reboot after upgrade, the first screen with Chinese, you can actually scroll the middle part of the screen, it should have English option.
I present you the LG Urbane WatchFaces port by me! :laugh:
-The zip contains 4 apks.Install all 4 apks one by one and you will get 20 Watchfaces (All stock Watchfaces from LG Urbane.Untouched,Unmodified)
-Tried on my LG G Watch W100 and all watchfaces are working perfectly! Should work on any Android Wear device
***INSTALLATION***
1)Go to your phones developer settings and make sure you have "Usb Debugging" Ticked
2)Turn on your phone's bluetooth and connect your watch
3)Go to the Android Wear app in your phone.There click on the Cog icon and settings will be brought up
4)Scroll all the way down and turn on "Debugging over Bluetooth"
5)In your watch go to Settings>About and tap on the "Build Number" seven times.This will enable "Developer Options" in your Watch.
6)In Developer Options select "ADB Debugging" and enable it.Also enable "Debug over Bluetooth"
7)Now you need to download a Tool called "Windroid" (Link- http://forum.xda-developers.com/devdb/project/dl/?id=16180)
8)Now connect your Watch to your PC via the Charging usb (I got a G Watch so i just out in on the charging cradle and connected it to pc)
9)Start the Windroid tool, it should detect your watch now.Choose "Yes" when you get a popup as soon as you connect your watch to pc and start windroid
10)Finally go to commands in Windroid and select "Install app" and install all 4 apks provided by me in the zip
------DONE ENJOY ------
>I got the apks from a LG Urbane's system dump
>If you Want to see more Stock Watchfaces from different OEM's and if your watch is rooted,then contact me!
IF YOU LIKED MY WORK THEN PLEASE HIT THANKS!:fingers-crossed::good:
thanks for your LG watchfaces porting to another watch..
i tried installing it to my huawei watch, and success..
do u have moto 360 2nd edition, stock watchfaces also ?
Cool stuff.
Installed all 4 APKs on my LG G Watch R and the only new watch face is 'Daily'. There are several other default watch faces that are available on the Urbane but not the Watch R. Anyway you can add these remaining ones? or are they included and I did something wrong on my end (tried several different times).
Nice work! I installed on my Huawei watch no problem. I installed direct from ADB though. It would be awesome if we could get the Tag Connected watch faces ported. Was the process difficult? I'm going to start looking for the stock rom now
Anyone know if there are other projects like this for other whatch faces? For example... Moto 360 or Samsung gear S2??
Sent from my HUAWEI NXT-AL10 using XDA-Developers mobile app
Hey Hipped, you didn't by any chance get the other watch faces from the Urbane image, did you?
I flashed a modded distro of Stock M1D63X to my urbane and unfortunately most of the original Urbane faces (like Chronos silver and Chronos gold, as well as the Executive or whatever it's called - also in gold & silver).
I installed the four you had hear (one said FAILED: already installed) but would like to flesh-out the original collection again like it was on the STOCK image.
WayneTho said:
Hey Hipped, you didn't by any chance get the other watch faces from the Urbane image, did you?
I flashed a modded distro of Stock M1D63X to my urbane and unfortunately most of the original Urbane faces (like Chronos silver and Chronos gold, as well as the Executive or whatever it's called - also in gold & silver).
I installed the four you had hear (one said FAILED: already installed) but would like to flesh-out the original collection again like it was on the STOCK image.
Click to expand...
Click to collapse
Nevermind, I managed to extract them myself and isntall them, but then I reverted back to stock (without wiping DATA, so as to keep my fake "UPDATE.ZIP" in place to prevent forced OTA updates).
I know this is an ancient thread, but I am looking for the APKs for my Urbane (W150) After flashing the stock ROM to um brick it, all but a couple of faces have gone.
madlec said:
I know this is an ancient thread, but I am looking for the APKs for my Urbane (W150) After flashing the stock ROM to um brick it, all but a couple of faces have gone.
Click to expand...
Click to collapse
I found them in here:
Stock Watchfaces Ported By Hipped_Orange22 [v2]
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
ZIP password is ho22
Where is the zip file ?!
dan4ox8 said:
Where is the zip file ?!
Click to expand...
Click to collapse
I'm not sure if the original file was removed purposefully - if so, my apologies for reposting it (please clarify, if so?).
Otherwise, I have attached it. It's the zip file that was originally linked by the OP.
Hi All
If You Own a LeEco X4 series tv then you must know that LeEco will not give any future Updates to the tv. Many of you want the play store Support and Google Play Services support..
We are happy to inform you that we have successfully Installed play store and play services on the X4 series.
We Also Thank our developers Who made it possible -
1) Roman Kent
2)Nanerasingh Manu
3)Neekz
4) Dipcore
5)Prateek Kejriwal
Also you can install any custom launcher..
Please Join The Telegram Group For Further Help -
MOD EDIT: LINK REMOVED
There are many links So will share them soon.. Until then please join the telegram group.
EUI Version
CHINA with Play Store and Play Services - EUI 6.5
US (Android Aosp) - EUI 5.8.057S
Awesome! performing the upgrade to 6.5 today!
OK, I've got it installed EUI 6.5 rooted, but I can't seem to get Gapps installed for the life of me. using the script calls ADB, but I can't figure out how to enable debugging in my TV to allow that.. The new UI is just too different to locate what I need to do.
I take no credit for any of this work. I'm just a user who found the instructions vague and confusing. So once I figured out what I needed, I decided to document it here.
OK, I've gone through all the steps. Its kinda clunky but it works. I'll first warn you if Netflix is your thing, this probably isn't for you.
Netflix does work, but you're required to use the phone/tablet app from PUREApk. This evidently reduces the video quality quite a bit.
It was noticeable for me. Felt like I was watching somewhat artifacty 720p. To get there I had to enable settings for video quality to "HIGH" otherwise it showed up in SD which was way worse.
So if you enjoy 1080P or 4K netflix, this is not your upgrade. Also, if you don't wish to be forced to use keyboard/mouse. this is NOT your upgrade. If none of that matters to you, by all means feel free!
Step 1) First flash EUI 6 BIN FILE https://drive.google.com/file/d/1HBiM2WAllOQ43ONI7Jk3Gaey6P8FYDmo/view
To do that you must format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
You'll notice the TV comes on in chinese. If you need english use the google translate app and camera to convert chinese to english.
Get to home screen, press settings button, go to bottom System Settings, another menu will slide out, then General (3rd option down),
Next go to Time and settings (second option down), Go to right pane and 3rd/bottom option will be language. Select English.
Step 2) upgrade to 6.5 via offline update zip. DO NOT USE THE ROOTED BIN FILE YET, you'll have to start over if you do.
Download https://drive.google.com/file/d/1rbov4oeMUh49rSF2hvUPvoTqRXGbThYS/view and place it on the FAT32 flashdrive.
After skipping through the tutorials and jazz, go to the apps pane (press right button a few times) and go to system update -> offline update -> choose 6.5 zip file.
Step 3) Flash 6.5 rooted bin file https://mega.nz/#!GIYCxQLB!V2jBnfH0K5-DzUUWy6_RegDlnhglxpWJhVa8yd5NVKE
Basically repeating step 1, but now with the 6.5 rooted bin file. Congrats, you're rooted.
Step 4) Download the GApps install tool. https://drive.google.com/open?id=1DHViq0yJ_-RlV3LQ_BuQsxIKEk2ip7ZB
Be warned, this requires windows and isn't as straight forward as you'd hope. The app doesn't work until USB Debugging is enabled.
Also, you won't be doing this over USB. It'll be connecting ADB over Network. To do this you need to:
Go back to system setting where you changed language, but go down to saftey and enable "Application of Unknown Origin".
Now we need to sideload apps.
download https://apkpure.com/usb-debugging/com.bluedragonfly.developeroptions to the flash drive, and use the file manager to locate/install it.
download also https://forum.xda-developers.com/showthread.php?t=1687590[/url] ADBD.apk to the flash drive and use the file manager to locate/install it
Open the first app and enable USB Debugging. Then open the second app to enable insecure ADB.
Now the janky GApps batch script should work. You'll want to perform actions 1, 2, and 3.
Sadly, this will factory reset your TV once again, and you'll have to go through the setup, but its no big deal.
Now if you want extra packages I suggest sideloading the PUREApk app from https://apkpure.com/. this will help you install the Netflix mobile app.
If you want to enable HDMI CEC by neekzz, Place https://mega.nz/#!aQQgiDyQ!ih9K6-rZ0yQoToDPoqAg93AN6Cy3L5JNsdMw7Fy-ADc
on the system/lib64/hw . Then turn off the receiver. Restart the TV... You'll need to know how to use adb to push the file.
REVERT ) So you've decided you've made a grave error, or don't care for some quirks, whatever the case may be, time to go back to US FW.
Step 1) Download US Stock firmware BIN file. https://mega.nz/#!fcwxGQ5I!FmO4xArY4ObmittoVNfnE21utvy8kkSSnTJFR9UXA3I
Format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
Step 2) Upgrade to last known US firmware available. Download the file from the following link:
http://g3.letv.cn/263/6/84/scmauto/...C058056B04201S_5.8.056S_0420_USER.zip?retry=0
Place the zip file on the flash drive. Go to System Update app and perform an Offline update and select the zip file.
And you're done. Welcome back.
Step 3) you may have some issues with Google Play Services constantly crashing. Latest Google Play services needs a newer version of Google play services to be installed .
Ridiculous, I know. Side loading the latest Google Play services apk can help resolve your issue. Download the apk from:
https://www.apkmirror.com/apk/google-inc/google-play-services-android-tv/
Put it on your flash drive. Go to settings > Security > and Allow Unknown Sources.
Open File Manager > APK > and select Google Play services apk.
[Recovery] LeTV Super4 (4th generation) :: All Mstar 6a938 based models supported
I want to leeco tv android oreo custom rom
I want to any custom oreo rom for leeco tv it is possible or not.
telegram group for LeEco
Souviktechguy said:
Hi All
If You Own a LeEco X4 series tv then you must know that LeEco will not give any future Updates to the tv. Many of you want the play store Support and Google Play Services support..
We are happy to inform you that we have successfully Installed play store and play services on the X4 series.
We Also Thank our developers Who made it possible -
1) Roman Kent
2)Nanerasingh Manu
3)Neekz
4) Dipcore
5)Prateek Kejriwal
Also you can install any custom launcher..
Please Join The Telegram Group For Further Help -
MOD EDIT: LINK REMOVED
There are many links So will share them soon.. Until then please join the telegram group.
Click to expand...
Click to collapse
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
blk4004 said:
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
Click to expand...
Click to collapse
Not possible. Per forum rule #5, promoting social media is not allowed on XDA.
What is the magic to get Google Assistant 3.0 or higher working on a LeEco x4-55? It seems to always crash right after sign-in process.
routerhacker said:
What is the magic to get Google Assistant 3.0 or higher working on a LeEco x4-55? It seems to always crash right after sign-in process.
Click to expand...
Click to collapse
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
I have the LeEco 43 in bedroom....so frustrated, it is connected to the internet. I have cut the cable and using apps. Every time I turn the tv off...and then turn on later it will not upload the apps....I unplug the tv for a minute...then turn on and the apps load. I am not that tech savvy and would appreciate any help you might offer
Stuck
Darksurf said:
I take no credit for any of this work. I'm just a user who found the instructions vague and confusing. So once I figured out what I needed, I decided to document it here.
OK, I've gone through all the steps. Its kinda clunky but it works. I'll first warn you if Netflix is your thing, this probably isn't for you.
Netflix does work, but you're required to use the phone/tablet app from PUREApk. This evidently reduces the video quality quite a bit.
It was noticeable for me. Felt like I was watching somewhat artifacty 720p. To get there I had to enable settings for video quality to "HIGH" otherwise it showed up in SD which was way worse.
So if you enjoy 1080P or 4K netflix, this is not your upgrade. Also, if you don't wish to be forced to use keyboard/mouse. this is NOT your upgrade. If none of that matters to you, by all means feel free!
Step 1) First flash EUI 6 BIN FILE https://drive.google.com/file/d/1HBiM2WAllOQ43ONI7Jk3Gaey6P8FYDmo/view
To do that you must format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
You'll notice the TV comes on in chinese. If you need english use the google translate app and camera to convert chinese to english.
Get to home screen, press settings button, go to bottom System Settings, another menu will slide out, then General (3rd option down),
Next go to Time and settings (second option down), Go to right pane and 3rd/bottom option will be language. Select English.
Step 2) upgrade to 6.5 via offline update zip. DO NOT USE THE ROOTED BIN FILE YET, you'll have to start over if you do.
Download https://drive.google.com/file/d/1rbov4oeMUh49rSF2hvUPvoTqRXGbThYS/view and place it on the FAT32 flashdrive.
After skipping through the tutorials and jazz, go to the apps pane (press right button a few times) and go to system update -> offline update -> choose 6.5 zip file.
Step 3) Flash 6.5 rooted bin file https://mega.nz/#!GIYCxQLB!V2jBnfH0K5-DzUUWy6_RegDlnhglxpWJhVa8yd5NVKE
Basically repeating step 1, but now with the 6.5 rooted bin file. Congrats, you're rooted.
Step 4) Download the GApps install tool. https://drive.google.com/open?id=1DHViq0yJ_-RlV3LQ_BuQsxIKEk2ip7ZB
Be warned, this requires windows and isn't as straight forward as you'd hope. The app doesn't work until USB Debugging is enabled.
Also, you won't be doing this over USB. It'll be connecting ADB over Network. To do this you need to:
Go back to system setting where you changed language, but go down to saftey and enable "Application of Unknown Origin".
Now we need to sideload apps.
download https://apkpure.com/usb-debugging/com.bluedragonfly.developeroptions to the flash drive, and use the file manager to locate/install it.
download also https://forum.xda-developers.com/showthread.php?t=1687590[/url] ADBD.apk to the flash drive and use the file manager to locate/install it
Open the first app and enable USB Debugging. Then open the second app to enable insecure ADB.
Now the janky GApps batch script should work. You'll want to perform actions 1, 2, and 3.
Sadly, this will factory reset your TV once again, and you'll have to go through the setup, but its no big deal.
Now if you want extra packages I suggest sideloading the PUREApk app from https://apkpure.com/. this will help you install the Netflix mobile app.
If you want to enable HDMI CEC by neekzz, Place https://mega.nz/#!aQQgiDyQ!ih9K6-rZ0yQoToDPoqAg93AN6Cy3L5JNsdMw7Fy-ADc
on the system/lib64/hw . Then turn off the receiver. Restart the TV... You'll need to know how to use adb to push the file.
REVERT ) So you've decided you've made a grave error, or don't care for some quirks, whatever the case may be, time to go back to US FW.
Step 1) Download US Stock firmware BIN file. https://mega.nz/#!fcwxGQ5I!FmO4xArY4ObmittoVNfnE21utvy8kkSSnTJFR9UXA3I
Format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
Step 2) Upgrade to last known US firmware available. Download the file from the following link:
http://g3.letv.cn/263/6/84/scmauto/...C058056B04201S_5.8.056S_0420_USER.zip?retry=0
Place the zip file on the flash drive. Go to System Update app and perform an Offline update and select the zip file.
And you're done. Welcome back.
Step 3) you may have some issues with Google Play Services constantly crashing. Latest Google Play services needs a newer version of Google play services to be installed .
Ridiculous, I know. Side loading the latest Google Play services apk can help resolve your issue. Download the apk from:
https://www.apkmirror.com/apk/google-inc/google-play-services-android-tv/
Put it on your flash drive. Go to settings > Security > and Allow Unknown Sources.
Open File Manager > APK > and select Google Play services apk.
Click to expand...
Click to collapse
I have done the US din and update after i accidentally moved my internal memory to a 3.1 drive. After doing the updates and google play store and services does its updates my screen flickers and a grey screen comes up with a black strip ontop. I have to press back on my remote until it comes up again. Many times back to back. I have to wipe my tv to get it to stop but after updates the same thing happens. Do you think you can help?
the Doctor said:
Not possible. Per forum rule #5, promoting social media is not allowed on XDA.
Click to expand...
Click to collapse
How do i post links for other firmware.. Xda is not allowing me to post firmware link as well!
Toni247C said:
I have done the US din and update after i accidentally moved my internal memory to a 3.1 drive. After doing the updates and google play store and services does its updates my screen flickers and a grey screen comes up with a black strip ontop. I have to press back on my remote until it comes up again. Many times back to back. I have to wipe my tv to get it to stop but after updates the same thing happens. Do you think you can help?
Click to expand...
Click to collapse
Clear showtime app and force stop... It will resolve your problem
blk4004 said:
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
Click to expand...
Click to collapse
Search TECHNITURE channel on youtube for more help..
You don't have to unplug the tv, hold the power button down for like 4 seconds to fully power the tv down, that works for me.
我是香港用戶。我成功刷了美國5.8 Rom，但無法搜索香港電視信號。如何將ATAC轉換為DTMB？
Hi my name is lawal am using leeco tv can some help me with new update please
Please some one should help me with new update for leeco tv please thank you all