I present you the LG Urbane WatchFaces port by me! :laugh:
-The zip contains 4 apks.Install all 4 apks one by one and you will get 20 Watchfaces (All stock Watchfaces from LG Urbane.Untouched,Unmodified)
-Tried on my LG G Watch W100 and all watchfaces are working perfectly! Should work on any Android Wear device
***INSTALLATION***
1)Go to your phones developer settings and make sure you have "Usb Debugging" Ticked
2)Turn on your phone's bluetooth and connect your watch
3)Go to the Android Wear app in your phone.There click on the Cog icon and settings will be brought up
4)Scroll all the way down and turn on "Debugging over Bluetooth"
5)In your watch go to Settings>About and tap on the "Build Number" seven times.This will enable "Developer Options" in your Watch.
6)In Developer Options select "ADB Debugging" and enable it.Also enable "Debug over Bluetooth"
7)Now you need to download a Tool called "Windroid" (Link- http://forum.xda-developers.com/devdb/project/dl/?id=16180)
8)Now connect your Watch to your PC via the Charging usb (I got a G Watch so i just out in on the charging cradle and connected it to pc)
9)Start the Windroid tool, it should detect your watch now.Choose "Yes" when you get a popup as soon as you connect your watch to pc and start windroid
10)Finally go to commands in Windroid and select "Install app" and install all 4 apks provided by me in the zip
------DONE ENJOY ------
>I got the apks from a LG Urbane's system dump
>If you Want to see more Stock Watchfaces from different OEM's and if your watch is rooted,then contact me!
IF YOU LIKED MY WORK THEN PLEASE HIT THANKS!:fingers-crossed::good:
thanks for your LG watchfaces porting to another watch..
i tried installing it to my huawei watch, and success..
do u have moto 360 2nd edition, stock watchfaces also ?
Cool stuff.
Installed all 4 APKs on my LG G Watch R and the only new watch face is 'Daily'. There are several other default watch faces that are available on the Urbane but not the Watch R. Anyway you can add these remaining ones? or are they included and I did something wrong on my end (tried several different times).
Nice work! I installed on my Huawei watch no problem. I installed direct from ADB though. It would be awesome if we could get the Tag Connected watch faces ported. Was the process difficult? I'm going to start looking for the stock rom now
Anyone know if there are other projects like this for other whatch faces? For example... Moto 360 or Samsung gear S2??
Sent from my HUAWEI NXT-AL10 using XDA-Developers mobile app
Hey Hipped, you didn't by any chance get the other watch faces from the Urbane image, did you?
I flashed a modded distro of Stock M1D63X to my urbane and unfortunately most of the original Urbane faces (like Chronos silver and Chronos gold, as well as the Executive or whatever it's called - also in gold & silver).
I installed the four you had hear (one said FAILED: already installed) but would like to flesh-out the original collection again like it was on the STOCK image.
WayneTho said:
Hey Hipped, you didn't by any chance get the other watch faces from the Urbane image, did you?
I flashed a modded distro of Stock M1D63X to my urbane and unfortunately most of the original Urbane faces (like Chronos silver and Chronos gold, as well as the Executive or whatever it's called - also in gold & silver).
I installed the four you had hear (one said FAILED: already installed) but would like to flesh-out the original collection again like it was on the STOCK image.
Click to expand...
Click to collapse
Nevermind, I managed to extract them myself and isntall them, but then I reverted back to stock (without wiping DATA, so as to keep my fake "UPDATE.ZIP" in place to prevent forced OTA updates).
I know this is an ancient thread, but I am looking for the APKs for my Urbane (W150) After flashing the stock ROM to um brick it, all but a couple of faces have gone.
madlec said:
I know this is an ancient thread, but I am looking for the APKs for my Urbane (W150) After flashing the stock ROM to um brick it, all but a couple of faces have gone.
Click to expand...
Click to collapse
I found them in here:
Stock Watchfaces Ported By Hipped_Orange22 [v2]
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
ZIP password is ho22
Where is the zip file ?!
dan4ox8 said:
Where is the zip file ?!
Click to expand...
Click to collapse
I'm not sure if the original file was removed purposefully - if so, my apologies for reposting it (please clarify, if so?).
Otherwise, I have attached it. It's the zip file that was originally linked by the OP.
Related
Will navigation is not working.. but the app work with GPS
1- Download android wear apk tool from here
2- Enable Debug on the watch
3-Download Google maps Mini from here
4-Enjoy !
Fully tested with Huawei Watch
Fully tested with Huawei Watch
Click to expand...
Click to collapse
Thanks! I was going to try Google Maps but didn't expect it to work. Most apps which require data from the internet do not work, since there is no way for them to get the data (Android Wear does not currently provide a direct connection to the internet over bluetooth). But I was surprised to see that Google Maps does in fact work! Thank you
(I'm also using a Huawei Watch)
SomeGuyInOz said:
Thanks! I was going to try Google Maps but didn't expect it to work. Most apps which require data from the internet do not work, since there is no way for them to get the data (Android Wear does not currently provide a direct connection to the internet over bluetooth). But I was surprised to see that Google Maps does in fact work! Thank you
(I'm also using a Huawei Watch)
Click to expand...
Click to collapse
Yea i think its implemented but not yet public
google keep dos not work
i hope we see some standalone apps in the future and i hope they implement wifi sync with iOs
the app stops if I try to load it
moto360 and iphone5s
Mahdy89 said:
Will navigation is not working.. but the app work with GPS
1- Download android wear apk tool from here
2- Enable Debug on the watch
3-Download Google maps Mini from here
4-Enjoy !
Fully tested with Huawei Watch
Click to expand...
Click to collapse
It works also as a gps.
Open google maps on the smartwatch.
Open google Maps from the iphone (not ios maps) and select your destination.
You'll get instruction on the watch
i use Tic Watch from china,
i install google maps apk to my watch
when i open the app, maps tell me need to update android wear
how can i update ? any apk can use to install it ?
geraldlim said:
i use Tic Watch from china,
i install google maps apk to my watch
when i open the app, maps tell me need to update android wear
how can i update ? any apk can use to install it ?
Click to expand...
Click to collapse
I have figured it out. You can update by manually installing the newest version of android wear app from playstore to your watch.
First, get an apk file of androidwear(android version).
change the file name into .zip, and extract it.
Inside a folder named "raw" inside "res", you can find an apk file.
install it to your watch with adb commands.
(if it fails to install, use the "adb install -r xxx.apk" command)
after this, you can update the android wear app on your watch
Thanks for the tutorial!
This app also works on moto 360?
Huawei / Iphone 5s.
Installation worked, I do now have the Maps icon/app on the watch.
It does give the location where I'am and features a map around me.
But the update of the gps signal is slow (probably caused by the frequency of the android wear app/google maps refreshes it) and I can't use places nearby (nothing is nearby) and navigation.
Navigation started on the phone is not transferred to the watch.
Any possibilities in a more frequent gps signal/update?
niravsoni said:
Google Maps got Google Maps v9.21 new update with new drive mode feature :]Download APK From HERE[/URL]
Click to expand...
Click to collapse
This APK is not wear ready.
I guess the TS stripped a full APK to a wearable one, right?
Can this be done (again) with a more recent full APK?
niravsoni said:
Yes it can be done with this version.
Click to expand...
Click to collapse
First question: how?
And second, does it help wear users by e.g. faster gps responses?
I think it doesn't work any more... I have installed but iPhone 6 iOS 9.0.2 Google Maps (up to date) is not responsive to the watch. Or watch is not receiving packages from iPhone. Not sure... But it hangs at "Waiting for location". Nothing else.
Which apk did you use?
william_jc said:
Which apk did you use?
Click to expand...
Click to collapse
@william_jc, I have used both. First tried Mahdy's it was just working like a standalone app. No iOS completion.
Then stripped the latest version for wearable. That was same so far.
No navigation, no nearby, nothing. Just a dry map. I didn't figure out or found any solution yet to it.
Edit:
I'd like to answer your question also.
When you download a wearable supported apk (through apkpure.com ie.) extract it to a folder (7zip is doing it quickly). Apk is a sort of ZIP archive. You can either change the file extension to .zip file or directly right click and extract with 7zip etc.
Anyhow, go to /raw/res/ directory after extraction. You will find another *.apk file there. That is for wearable.
You can install it right away to your wearable. Though adb :
adb install XXXXX.APK
That much easy.
Raintech said:
@william_jc, I have used both. First tried Mahdy's it was just working like a standalone app. No iOS completion.
Then stripped the latest version for wearable. That was same so far.
No navigation, no nearby, nothing. Just a dry map. I didn't figure out or found any solution yet to it.
Edit:
I'd like to answer your question also.
When you download a wearable supported apk (through apkpure.com ie.) extract it to a folder (7zip is doing it quickly). Apk is a sort of ZIP archive. You can either change the file extension to .zip file or directly right click and extract with 7zip etc.
Anyhow, go to /raw/res/ directory after extraction. You will find another *.apk file there. That is for wearable.
You can install it right away to your wearable. Though adb :
adb install XXXXX.APK
That much easy.
Click to expand...
Click to collapse
Ok, same here. At least after the 1.4 update and using the first google maps.
That means: standalone map, no places nearby no navigation. Fair enough for me if the gps update time was shorter. Now it seems to update ones every 15 minutes or so. Should be every 10 seconds
I do understand the stripping now, although it seems a less smaller apk (the new one).
does this work on all adndroid wear?
Sir, Could u like to help me to remove bypass security in game iruna online, we cant play this game after it update to iruna 3.1.9E, this game doesnt work if we have chat app in our device, like xmod, gamekiller n others.
sorry me noob
Mahdy89 said:
Will navigation is not working.. but the app work with GPS
1- Download android wear apk tool from here
2- Enable Debug on the watch
3-Download Google maps Mini from here
4-Enjoy !
Fully tested with Huawei Watch
Click to expand...
Click to collapse
I am using windows 10 have Xperia Arc S , i want to unlock the boot loader i have the key of it from sony but i cannot install driver for S1boot Fasboot
Please help
if someone need how to start ADB on Mac, here is guide which helped me
http://stackoverflow.com/questions/31374085/installing-adb-on-mac-os-x
and i would like to ask if is possible change for there updated maps? I tried more versions but without any success:/
and I tried also find some another apps, but I can't, is here any topic with it?
Thank you very much.
Jozef
Hello, I recently bought an mi box 3rd gen or also called Enhanced Edition, and I want to root it to make it full English UI and uninstall some system apps, could someone help me how to root it, I would be very gratefully, I searched all the internet and nothing still.
It has just 3 ports
1.HDMI Port
2.USB Port
3.Power Port.
Reply: for MI Box 3 Enhanced Version
Hi
Even I purchased it recently and can anyone guide me on this please.
samcex said:
Hello, I recently bought an mi box 3rd gen or also called Enhanced Edition, and I want to root it to make it full English UI and uninstall some system apps, could someone help me how to root it, I would be very gratefully, I searched all the internet and nothing still.
It has just 3 ports
1.HDMI Port
2.USB Port
3.Power Port.
Click to expand...
Click to collapse
Found a way !!!
Hi there,
I managed to successfully root my Mi Box 3 w firmware 1.3.114 . Thought I'd share
Tools needed:
- Male to Micro USB Female Converter Connector
- USB stick
Software needed:
- Mi image 1.3.106:
yadi.sk/d/Yvr1jYflm6GZR or
dropbox.com/s/72x76khqjlpekap/MiBOX3_jurassicpark_gitv_1.3.106.386.zip
- Kingo root for windows
kingoapp dot com
First you will need to downgrade the firmware to version 1.3.106.
Extract the contents of the downloaded zip file to a formatted usb tick (Fat32).
(Should be two files: xiaomi_update and update.zip)
Put the stick in your Mi Box and boot in recovery: unplug power, press and hold back + ok button ( or Home and Menu while rebooting ) while plugging the power back in. The remote should be nearby and facing the box. Do not let go of the buttons until it booted in recovery. the flashing should start and finish automatically.
After first boot make sure you disable Intelligent Update.
Second step is to root your box with Kingo.
Enable USB/ADB debugging and reboot (it's right there in the menu under security settings).
Install Kingo root on your pc or laptop and connect your box using a micro usb charging cable. This is where you'll need the adapter. Start Kingo Root, follow instructions and choose 'Root again'.
This will take a minute... done!
Any question let me know I will be glad to help .
All credits to : passerby
venkat_shrine said:
Hi
Even I purchased it recently and can anyone guide me on this please.
Click to expand...
Click to collapse
It works great, the hardware is a beast! The only important issue I encountered so far is that sometimes it exits the video player, some other times just pauses the playback on Netflix, every 10 minutes or so. On You Tube it exits fullscreen mode, which can be quite annoying. The only solution I could find is this:
- In Settings (not the Chinese app, but the one that comes inside Shafa Market, or even better, make a google search for "startSettings.apk", download it , then install it on your Mi Box, this way you´ll no longer need Shafa Market), go to About the Phone section, and click repeatedly on the Build Version, till you are granted Developer rights.
- Back to Options, go to Developer Options, and change the number of background processes from Standard to None. You´ll have to repeat this last step every time the box reboots, but not after sleep/wake.
Done.
How did you install Google Services and does Play Store work ?
raducutzu said:
It works great, the hardware is a beast! The only important issue I encountered so far is that sometimes it exits the video player, some other times just pauses the playback on Netflix, every 10 minutes or so. On You Tube it exits fullscreen mode, which can be quite annoying. The only solution I could find is this:
- In Settings (not the Chinese app, but the one that comes inside Shafa Market, or even better, make a google search for "startSettings.apk", download it , the9n install it on your Mi Box, this way you´ll no longer need Shafa Market), go to About the Phone section, and click repeatedly on the Build Version, till you are granted Developer rights.
- Back to Options, go to Developer Options, and change the number of background processes from Standard to None. You´ll have to repeat this last step every time the box reboots, but not after sleep/wake.
Done.
Click to expand...
Click to collapse
samcex said:
How did you install Google Services and does Play Store work ?
Click to expand...
Click to collapse
I suppose you already have a bluetooth/wifi/usb keyboard/air mouse at hand, and switched to English by now, if not, please refer to this post:
http://www.cnx-software.com/2016/04/12/how-to-change-language-to-english-and-install-apps-remotely-on-xiaomi-mi-box-3-enhanced/
I skipped Shafa Market, I downloaded instead startSettings.apk from here:
https://www.google.es/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0ahUKEwjb6Ir4pcjNAhUCNhoKHaj6BdcQFgghMAA&url=https%3A%2F%2Fdrive.google.com%2Ffolderview%3Fid%3D0B16bkj0QSkYnfjc1YXQ1YU1sSGVGOHZqY3FjWUNabUVJd1dSTFpSb1BZbnU4cVZQMi1hMUk%26usp%3Dsharing&usg=AFQjCNE5hETwCJgxaa0KE0MtCkzU_tJF-w&sig2=Xk-SKY_nzqTE7aLmkhevZg
Copy it on a pendrive (you might want to copy the other apk-s for the next step, as well), then install it by inserting it in either USB port. You´ll be prompted to allow installation from unknown sources, click yes 允许. It´s all you need to have on your mi box for tweaking, like changing the language, instead of shafa market. Once opened, scroll down to the globe icon, and change it to English.
Then, follow really carefully this step-by-step guide, it´s a bit cumbersome, but it definitely works:
http://flying8pus.blogspot.com.es/
A few pointers, though:
1 - When rooting the device (the same thing here, use a pendrive, download all the apk-s you need on it, and install them from there), be patient, in some cases people had to wait a whole night for the 100% and the victor´s cup to show up. Check it out, and if it´s not done after 10-15 minutes, you´re out of luck, you might as well just go about your day, it will be over at some point. Make sure that in the mi box menu the sleep mode is disabled (set it from 30 minutes, I think, to Never), and don´t touch it, don´t open any apps, let 360Permroot do its magic.
2 - After installing Play Store DON´T OPEN IT! Install afterwards You Tube, then open this one. You´ll be prompted then to download Google Web Services (or something like that) in order to function properly. If you open Play Store before You Tube, you´ll never be prompted, and it will not work, at least that´s what I´ve been told, and I trust the guy (my brother).
Unfortunately, very few apps are recognised by Play Store as compatible with the device (luckily mx player is one of them), but you need it anyway, otherwise some Google services might not work. What I use instead for ease of use is uptodown app market, not even close as abundant as Play Store, but I get by. Once you install an app from there, it will update as soon as a newer version is available, and it´s not as picky as Play Store in terms of compatibility.
Take your time and good luck.
samcex said:
Hi there,
I managed to successfully root my Mi Box 3 w firmware 1.3.114 . Thought I'd share
Tools needed:
- Male to Micro USB Female Converter Connector
- USB stick
Software needed:
- Mi image 1.3.106:
yadi.sk/d/Yvr1jYflm6GZR or
dropbox.com/s/72x76khqjlpekap/MiBOX3_jurassicpark_gitv_1.3.106.386.zip
- Kingo root for windows
kingoapp dot com
First you will need to downgrade the firmware to version 1.3.106.
Extract the contents of the downloaded zip file to a formatted usb tick (Fat32).
(Should be two files: xiaomi_update and update.zip)
Put the stick in your Mi Box and boot in recovery: unplug power, press and hold back + ok button ( or Home and Menu while rebooting ) while plugging the power back in. The remote should be nearby and facing the box. Do not let go of the buttons until it booted in recovery. the flashing should start and finish automatically.
After first boot make sure you disable Intelligent Update.
Second step is to root your box with Kingo.
Enable USB/ADB debugging and reboot (it's right there in the menu under security settings).
Install Kingo root on your pc or laptop and connect your box using a micro usb charging cable. This is where you'll need the adapter. Start Kingo Root, follow instructions and choose 'Root again'.
This will take a minute... done!
Any question let me know I will be glad to help .
All credits to : passerby
Click to expand...
Click to collapse
Can you verify the model number on your box? Mdz-16-aa or mdz-16-ab? I did a bunch of research into rooting this box months ago and no one had found a way. I'm disappointed in the mdz-16-ab ever since I bought it. It has become more of a paper weight to me.
jholland92 said:
Can you verify the model number on your box? Mdz-16-aa or mdz-16-ab? I did a bunch of research into rooting this box months ago and no one had found a way. I'm disappointed in the mdz-16-ab ever since I bought it. It has become more of a paper weight to me.
Click to expand...
Click to collapse
I'm sorry I sold it 8 months ago.
Get rid of "Game play time xxh xxm" notification
Guys my Mibox 4k always has notification
Game play time xxh xxm
At the bottom left corner screen how to get rid of it please help thanks
ere's a collection of my ported stock watchfaces!
All the Watchfaces were taken straight from either System dump or OTA update of respective watches
All Watchfaces are ported by me.
The zip contains all the Stock watchfaces from the following watches:-
Asus Zenwatch 3
Casio WSD-F20
Diesel On
Eporio Armani
Fossil Q Explorist
Huawei Watch 1st gen
Huawei Watch 2nd Gen
LG Watch W100
LG Watch R
LG Watch Urbane
LG Watch Urbane 2nd Edition
Michael Kors Grayson **[NEW]**
Moto 360 2nd Gen (UPDATED,2.0) **[NEW]**
New Balance
Nixon Mission
Ustwo Old Watchfaces (Digilog etc) **[NEW]**
Samsung Gear Live
INSTALLATION:
https://forum.xda-developers.com/showthread.php?t=2499926
Use this tool for installing.
Intructions
just connect your watch to the pc via the cradle/charger and then open the above mentioned Tool,you'll get a prompt on your watch,choose "Always allow from this computer" and then use install app option from the tool,locate the apk and you're good to go!
also before doing all this don't forget to enable ADB debugging on your watch.(Tap build number 7 times and the enable it from developer settings)
SOME NOTES
--Install Zenwatch Manager on your phone otherwise ZW3 WFs wont work.
--Casio Watchfaces seems to work only if they are placed in /system/priv-app.So try pushing it to /system/priv-app via TWRP or any Root Explorer
--Huawei Watch 1st gen Watchfaces didn't work on my LG G Watch so try it for yourself
--Some of the Huawei Watch 2 Watchfaces won't work and they'll display a black screen
--i've installed all of these on my Huawei Watch 1 and every watchface works perfectly without any problem.Also some watchfaces may get messed up on Square screens.
Here's the link for the watchfaces LINK!
Password for the zip file=ho22
ENJOY!
PLEASE HIT THANKS, IT HELPS ME ALOT
Thanks for the port, just add that zw manager consumes the battery. otherwise excellent contribution.
I cant Install huawei watch 2 face on my huawei watch 1.
Hipped_Orange22 said:
ere's a collection of my ported stock watchfaces!
All the Watchfaces were taken straight from either System dump or OTA update of respective watches
All Watchfaces are ported by me.
Casio WSD-F20
Click to expand...
Click to collapse
Hi buddy, I like your work, thanks alot for this. But I wanna ask you "How can I install Casio WSD-F20.apk to my LG G Watch R ?"
My watch is already unlocked and I use stock Wear OS 2.0. Casio WSD-F20 looks like a system app and WinDroid Tookit failed to install it.
Thanks &Regards
Installed most of wach faces with WEAR INSTALLER.
No problems on TicWatch Pro 3.
Thank you @Hipped_Orange22
Most of these work the trick. Don't suppose any one has some more recent released watch faces available?
Hi All
If You Own a LeEco X4 series tv then you must know that LeEco will not give any future Updates to the tv. Many of you want the play store Support and Google Play Services support..
We are happy to inform you that we have successfully Installed play store and play services on the X4 series.
We Also Thank our developers Who made it possible -
1) Roman Kent
2)Nanerasingh Manu
3)Neekz
4) Dipcore
5)Prateek Kejriwal
Also you can install any custom launcher..
Please Join The Telegram Group For Further Help -
MOD EDIT: LINK REMOVED
There are many links So will share them soon.. Until then please join the telegram group.
EUI Version
CHINA with Play Store and Play Services - EUI 6.5
US (Android Aosp) - EUI 5.8.057S
Awesome! performing the upgrade to 6.5 today!
OK, I've got it installed EUI 6.5 rooted, but I can't seem to get Gapps installed for the life of me. using the script calls ADB, but I can't figure out how to enable debugging in my TV to allow that.. The new UI is just too different to locate what I need to do.
I take no credit for any of this work. I'm just a user who found the instructions vague and confusing. So once I figured out what I needed, I decided to document it here.
OK, I've gone through all the steps. Its kinda clunky but it works. I'll first warn you if Netflix is your thing, this probably isn't for you.
Netflix does work, but you're required to use the phone/tablet app from PUREApk. This evidently reduces the video quality quite a bit.
It was noticeable for me. Felt like I was watching somewhat artifacty 720p. To get there I had to enable settings for video quality to "HIGH" otherwise it showed up in SD which was way worse.
So if you enjoy 1080P or 4K netflix, this is not your upgrade. Also, if you don't wish to be forced to use keyboard/mouse. this is NOT your upgrade. If none of that matters to you, by all means feel free!
Step 1) First flash EUI 6 BIN FILE https://drive.google.com/file/d/1HBiM2WAllOQ43ONI7Jk3Gaey6P8FYDmo/view
To do that you must format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
You'll notice the TV comes on in chinese. If you need english use the google translate app and camera to convert chinese to english.
Get to home screen, press settings button, go to bottom System Settings, another menu will slide out, then General (3rd option down),
Next go to Time and settings (second option down), Go to right pane and 3rd/bottom option will be language. Select English.
Step 2) upgrade to 6.5 via offline update zip. DO NOT USE THE ROOTED BIN FILE YET, you'll have to start over if you do.
Download https://drive.google.com/file/d/1rbov4oeMUh49rSF2hvUPvoTqRXGbThYS/view and place it on the FAT32 flashdrive.
After skipping through the tutorials and jazz, go to the apps pane (press right button a few times) and go to system update -> offline update -> choose 6.5 zip file.
Step 3) Flash 6.5 rooted bin file https://mega.nz/#!GIYCxQLB!V2jBnfH0K5-DzUUWy6_RegDlnhglxpWJhVa8yd5NVKE
Basically repeating step 1, but now with the 6.5 rooted bin file. Congrats, you're rooted.
Step 4) Download the GApps install tool. https://drive.google.com/open?id=1DHViq0yJ_-RlV3LQ_BuQsxIKEk2ip7ZB
Be warned, this requires windows and isn't as straight forward as you'd hope. The app doesn't work until USB Debugging is enabled.
Also, you won't be doing this over USB. It'll be connecting ADB over Network. To do this you need to:
Go back to system setting where you changed language, but go down to saftey and enable "Application of Unknown Origin".
Now we need to sideload apps.
download https://apkpure.com/usb-debugging/com.bluedragonfly.developeroptions to the flash drive, and use the file manager to locate/install it.
download also https://forum.xda-developers.com/showthread.php?t=1687590[/url] ADBD.apk to the flash drive and use the file manager to locate/install it
Open the first app and enable USB Debugging. Then open the second app to enable insecure ADB.
Now the janky GApps batch script should work. You'll want to perform actions 1, 2, and 3.
Sadly, this will factory reset your TV once again, and you'll have to go through the setup, but its no big deal.
Now if you want extra packages I suggest sideloading the PUREApk app from https://apkpure.com/. this will help you install the Netflix mobile app.
If you want to enable HDMI CEC by neekzz, Place https://mega.nz/#!aQQgiDyQ!ih9K6-rZ0yQoToDPoqAg93AN6Cy3L5JNsdMw7Fy-ADc
on the system/lib64/hw . Then turn off the receiver. Restart the TV... You'll need to know how to use adb to push the file.
REVERT ) So you've decided you've made a grave error, or don't care for some quirks, whatever the case may be, time to go back to US FW.
Step 1) Download US Stock firmware BIN file. https://mega.nz/#!fcwxGQ5I!FmO4xArY4ObmittoVNfnE21utvy8kkSSnTJFR9UXA3I
Format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
Step 2) Upgrade to last known US firmware available. Download the file from the following link:
http://g3.letv.cn/263/6/84/scmauto/...C058056B04201S_5.8.056S_0420_USER.zip?retry=0
Place the zip file on the flash drive. Go to System Update app and perform an Offline update and select the zip file.
And you're done. Welcome back.
Step 3) you may have some issues with Google Play Services constantly crashing. Latest Google Play services needs a newer version of Google play services to be installed .
Ridiculous, I know. Side loading the latest Google Play services apk can help resolve your issue. Download the apk from:
https://www.apkmirror.com/apk/google-inc/google-play-services-android-tv/
Put it on your flash drive. Go to settings > Security > and Allow Unknown Sources.
Open File Manager > APK > and select Google Play services apk.
[Recovery] LeTV Super4 (4th generation) :: All Mstar 6a938 based models supported
I want to leeco tv android oreo custom rom
I want to any custom oreo rom for leeco tv it is possible or not.
telegram group for LeEco
Souviktechguy said:
Hi All
If You Own a LeEco X4 series tv then you must know that LeEco will not give any future Updates to the tv. Many of you want the play store Support and Google Play Services support..
We are happy to inform you that we have successfully Installed play store and play services on the X4 series.
We Also Thank our developers Who made it possible -
1) Roman Kent
2)Nanerasingh Manu
3)Neekz
4) Dipcore
5)Prateek Kejriwal
Also you can install any custom launcher..
Please Join The Telegram Group For Further Help -
MOD EDIT: LINK REMOVED
There are many links So will share them soon.. Until then please join the telegram group.
Click to expand...
Click to collapse
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
blk4004 said:
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
Click to expand...
Click to collapse
Not possible. Per forum rule #5, promoting social media is not allowed on XDA.
What is the magic to get Google Assistant 3.0 or higher working on a LeEco x4-55? It seems to always crash right after sign-in process.
routerhacker said:
What is the magic to get Google Assistant 3.0 or higher working on a LeEco x4-55? It seems to always crash right after sign-in process.
Click to expand...
Click to collapse
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
I have the LeEco 43 in bedroom....so frustrated, it is connected to the internet. I have cut the cable and using apps. Every time I turn the tv off...and then turn on later it will not upload the apps....I unplug the tv for a minute...then turn on and the apps load. I am not that tech savvy and would appreciate any help you might offer
Stuck
Darksurf said:
I take no credit for any of this work. I'm just a user who found the instructions vague and confusing. So once I figured out what I needed, I decided to document it here.
OK, I've gone through all the steps. Its kinda clunky but it works. I'll first warn you if Netflix is your thing, this probably isn't for you.
Netflix does work, but you're required to use the phone/tablet app from PUREApk. This evidently reduces the video quality quite a bit.
It was noticeable for me. Felt like I was watching somewhat artifacty 720p. To get there I had to enable settings for video quality to "HIGH" otherwise it showed up in SD which was way worse.
So if you enjoy 1080P or 4K netflix, this is not your upgrade. Also, if you don't wish to be forced to use keyboard/mouse. this is NOT your upgrade. If none of that matters to you, by all means feel free!
Step 1) First flash EUI 6 BIN FILE https://drive.google.com/file/d/1HBiM2WAllOQ43ONI7Jk3Gaey6P8FYDmo/view
To do that you must format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
You'll notice the TV comes on in chinese. If you need english use the google translate app and camera to convert chinese to english.
Get to home screen, press settings button, go to bottom System Settings, another menu will slide out, then General (3rd option down),
Next go to Time and settings (second option down), Go to right pane and 3rd/bottom option will be language. Select English.
Step 2) upgrade to 6.5 via offline update zip. DO NOT USE THE ROOTED BIN FILE YET, you'll have to start over if you do.
Download https://drive.google.com/file/d/1rbov4oeMUh49rSF2hvUPvoTqRXGbThYS/view and place it on the FAT32 flashdrive.
After skipping through the tutorials and jazz, go to the apps pane (press right button a few times) and go to system update -> offline update -> choose 6.5 zip file.
Step 3) Flash 6.5 rooted bin file https://mega.nz/#!GIYCxQLB!V2jBnfH0K5-DzUUWy6_RegDlnhglxpWJhVa8yd5NVKE
Basically repeating step 1, but now with the 6.5 rooted bin file. Congrats, you're rooted.
Step 4) Download the GApps install tool. https://drive.google.com/open?id=1DHViq0yJ_-RlV3LQ_BuQsxIKEk2ip7ZB
Be warned, this requires windows and isn't as straight forward as you'd hope. The app doesn't work until USB Debugging is enabled.
Also, you won't be doing this over USB. It'll be connecting ADB over Network. To do this you need to:
Go back to system setting where you changed language, but go down to saftey and enable "Application of Unknown Origin".
Now we need to sideload apps.
download https://apkpure.com/usb-debugging/com.bluedragonfly.developeroptions to the flash drive, and use the file manager to locate/install it.
download also https://forum.xda-developers.com/showthread.php?t=1687590[/url] ADBD.apk to the flash drive and use the file manager to locate/install it
Open the first app and enable USB Debugging. Then open the second app to enable insecure ADB.
Now the janky GApps batch script should work. You'll want to perform actions 1, 2, and 3.
Sadly, this will factory reset your TV once again, and you'll have to go through the setup, but its no big deal.
Now if you want extra packages I suggest sideloading the PUREApk app from https://apkpure.com/. this will help you install the Netflix mobile app.
If you want to enable HDMI CEC by neekzz, Place https://mega.nz/#!aQQgiDyQ!ih9K6-rZ0yQoToDPoqAg93AN6Cy3L5JNsdMw7Fy-ADc
on the system/lib64/hw . Then turn off the receiver. Restart the TV... You'll need to know how to use adb to push the file.
REVERT ) So you've decided you've made a grave error, or don't care for some quirks, whatever the case may be, time to go back to US FW.
Step 1) Download US Stock firmware BIN file. https://mega.nz/#!fcwxGQ5I!FmO4xArY4ObmittoVNfnE21utvy8kkSSnTJFR9UXA3I
Format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
Step 2) Upgrade to last known US firmware available. Download the file from the following link:
http://g3.letv.cn/263/6/84/scmauto/...C058056B04201S_5.8.056S_0420_USER.zip?retry=0
Place the zip file on the flash drive. Go to System Update app and perform an Offline update and select the zip file.
And you're done. Welcome back.
Step 3) you may have some issues with Google Play Services constantly crashing. Latest Google Play services needs a newer version of Google play services to be installed .
Ridiculous, I know. Side loading the latest Google Play services apk can help resolve your issue. Download the apk from:
https://www.apkmirror.com/apk/google-inc/google-play-services-android-tv/
Put it on your flash drive. Go to settings > Security > and Allow Unknown Sources.
Open File Manager > APK > and select Google Play services apk.
Click to expand...
Click to collapse
I have done the US din and update after i accidentally moved my internal memory to a 3.1 drive. After doing the updates and google play store and services does its updates my screen flickers and a grey screen comes up with a black strip ontop. I have to press back on my remote until it comes up again. Many times back to back. I have to wipe my tv to get it to stop but after updates the same thing happens. Do you think you can help?
the Doctor said:
Not possible. Per forum rule #5, promoting social media is not allowed on XDA.
Click to expand...
Click to collapse
How do i post links for other firmware.. Xda is not allowing me to post firmware link as well!
Toni247C said:
I have done the US din and update after i accidentally moved my internal memory to a 3.1 drive. After doing the updates and google play store and services does its updates my screen flickers and a grey screen comes up with a black strip ontop. I have to press back on my remote until it comes up again. Many times back to back. I have to wipe my tv to get it to stop but after updates the same thing happens. Do you think you can help?
Click to expand...
Click to collapse
Clear showtime app and force stop... It will resolve your problem
blk4004 said:
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
Click to expand...
Click to collapse
Search TECHNITURE channel on youtube for more help..
You don't have to unplug the tv, hold the power button down for like 4 seconds to fully power the tv down, that works for me.
我是香港用戶。我成功刷了美國5.8 Rom,但無法搜索香港電視信號。如何將ATAC轉換為DTMB?
Hi my name is lawal am using leeco tv can some help me with new update please
Please some one should help me with new update for leeco tv please thank you all
I am trying to install a watchface taken from Amazfit Watchfaces, but the procedure explained on that website is not compatible with Android 11 and above as it says, and probably with the new Amazfit devices neither.
Being specific, folders mentioned in the guide that should be found on the smartphone are not there.
I can find some folders that look to be their replacement, but they are empty while there should be the default watchfaces.
Is there a new method compatible with the latest Android and Amazfit/Zepp versions?
Open https://play.google.com/store/apps/details?id=com.amazfitwatchfaces.st app, select fifth tab at the bottom, select +Add file, actually select your downloaded dial file. Select you watch model, click on Connect button then finally tap Install button.