Help me Update my tablet please! - Samsung Galaxy Tab S7 / S7 Plus Questions & Answer

Hey Folks
I got my tablet from work it's not a US model...the only way I can tell is that my Samsung free app is not in english lol. All the channels are in like some slavic language it seems.
But the issue is its stuck on Android 11 with a January 1st security patch. I've been looking up firmware updates to flash using odin and I'm unsure as to which one I should use.
my CSC code is OXM
if someone could please point me in the right direction I'd like that.
Also a stock rom would be great. I have to be ready to turn it back in to the company at any point.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

If it belongs to your company, then you need to take it to the IT department and let them upgrade it.

gernerttl said:
If it belongs to your company, then you need to take it to the IT department and let them upgrade it.
Click to expand...
Click to collapse
That is not an option, I work for Samsung and the tablet is supposed to be for work use only. They won't help. I can do it myself, I just haven't been in the modding have for awhile

wizky911 said:
That is not an option, I work for Samsung and the tablet is supposed to be for work use only. They won't help. I can do it myself, I just haven't been in the modding have for awhile
Click to expand...
Click to collapse
Wait. You work for Samsung and was issued a tablet by Samsung for work and it won't update to Android 12; nor will Samsung update it.
That makes no sense and does not pass the smell test.

Ok now that that's out of the way...
Like I said. I can do it myself, but I'm just looking to be pointed in the right direction.
No Samsung won't help, after 9 years with the company I know they're just going to say that
"An update isn't necessary for the use that the tablet serves."
I'm using as a personal tablet though, by luck of the draw they sent me a work tablet that's from Europe. It's stuck on Android 11.
I can't find any info on updating a tablet with an OXM country code

wizky911 said:
View attachment 5754755
Ok now that that's out of the way...
Like I said. I can do it myself, but I'm just looking to be pointed in the right direction.
No Samsung won't help, after 9 years with the company I know they're just going to say that
"An update isn't necessary for the use that the tablet serves."
I'm using as a personal tablet though, by luck of the draw they sent me a work tablet that's from Europe. It's stuck on Android 11.
I can't find any info on updating a tablet with an OXM country code
Click to expand...
Click to collapse
That is for the Note 8s. NOT the Galaxy Tab S7/S7+. The Note 8s NEVER had Android 11, it never went past Android 4.4.

gernerttl said:
That is for the Note 8s. NOT the Galaxy Tab S7/S7+. The Note 8s NEVER had Android 11, it never went past Android 4.
Click to expand...
Click to collapse
The article I posted just refers to a Samsung worker who goes by the name of wizky911. That was the only point

wizky911 said:
The article I posted just refers to a Samsung worker who goes by the name of wizky911. That was the only point
Click to expand...
Click to collapse
Which is you.

gernerttl said:
Which is you.
Click to expand...
Click to collapse
Yes. I haven't "claimed" to work for Samsung for 9yrs.

I just want to know if there's a stock ROM for CSC OXM. I can't seem to find it. And if it's possible to change the CSC without bricking it

wizky911 said:
I just want to know if there's a stock ROM for CSC OXM. I can't seem to find it. And if it's possible to change the CSC without bricking it
Click to expand...
Click to collapse
What does that post have to do with this? I told you, if the tablet is a work tablet and YOU work for Samsung, then talk to your company's (Samsung) IT department.

wizky911 said:
Yes. I haven't "claimed" to work for Samsung for 9yrs.
Click to expand...
Click to collapse
Yes you have:

gernerttl said:
Yes you have:
View attachment 5756073
Click to expand...
Click to collapse
How? I screenshoted my LinkedIn lol

We're done. And this thread has been reported,

gernerttl said:
We're done. And this thread has been reported,
Click to expand...
Click to collapse
Report it. I asked a legit question and a troll replied

gernerttl said:
We're done. And this thread has been reported,
Click to expand...
Click to collapse
Nothing in this thread is violating forum rules or is suspicious. I'd appreciate if replies to the thread are limited to posts that add value to support the OP in solving his issue. Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator

OP, have you stumbled on an obstacle where you can't flash using Odin? If not, you're imagining a wall that is not there.
OXM is a group of CSC's, in phones it is very partitioned to regions, i.e, most of Asia and all of Europe is included in OXM, and maybe Africa too. However, Tablets are a lot more fluid in this aspect.
If you have an OXM Tablet, which you do, and a WWD CSC, nothing stops you from flashing any OXM firmware to your device. Unless it's KNOX Enterprise tied. I do however see that there is no information for WWD as a CSC. If WWD means KNOX Enterprise, what i would do is try to contact the person that actually manages it.
If the tablet is not Enterprise locked, I suggest you grab Frija (a tool that downloads the latest firmware from Samsung servers), also grab the latest Samsund USB drivers, and lastly Odin (this one is a Samsung tool that leaks out in no time).
1. Download Frija, and download any OXM Rom with it, i.e. SM-T970, CSC: EUX. The app will download, CRC check the zip, and then all you have to do is unpack the zip package.
2. Assuming you downloaded and installed the Samsung USB Drivers already, turn off the tablet, Open Odin up, connect the tablet to the PC after running Odin, and hold Volume Down and Power Button. You will be presented with some text to press Volume Up to continue, and after that you will be in Download Mode. Odin should give you a Green or Blue light with COMX (X being a number), that means that there's a connection between your phone and Odin to flash the rom on it.
3. Load all relevant files from the unpacked ZIP to odin. BL to BL, AP to AP (this one will take a while, dont close odin if it looks like it's crashing), CP to CP, and HOME_CSC to CSC.
4. Start the Flash. If it works, your good, if it doesn't, no harm will be done.
If by any chance Odin fails, or Download Mode is not reachable, then you most definitely have a KNOX Enterprise managed device. I would advise you to now roam around looking for a workaround to take that off, first, you cant, second that puts you on a very dodgy position.
You'll be updated to October Patch, Android 12L, One UI 4.1.1.
Android 13 / One UI 5.0 is on the test firmware already, so that one is right around the corner too.
EDIT: Getting some mixed research about WWD. S22 in US seems to use it as a COMBO under a Group, like Europe is moving all countries (DBT, BTU, etc), to EUX under OXM. WWD seems to be for US models, but still, this is Phones. Another source is saying WWD is "Demo Units", stuff that is shown in Shops.

PlutoDelic said:
OP, have you stumbled on an obstacle where you can't flash using Odin? If not, you're imagining a wall that is not there.
OXM is a group of CSC's, in phones it is very partitioned to regions, i.e, most of Asia and all of Europe is included in OXM, and maybe Africa too. However, Tablets are a lot more fluid in this aspect.
If you have an OXM Tablet, which you do, and a WWD CSC, nothing stops you from flashing any OXM firmware to your device. Unless it's KNOX Enterprise tied. I do however see that there is no information for WWD as a CSC. If WWD means KNOX Enterprise, what i would do is try to contact the person that actually manages it.
If the tablet is not Enterprise locked, I suggest you grab Frija (a tool that downloads the latest firmware from Samsung servers), also grab the latest Samsund USB drivers, and lastly Odin (this one is a Samsung tool that leaks out in no time).
1. Download Frija, and download any OXM Rom with it, i.e. SM-T970, CSC: EUX. The app will download, CRC check the zip, and then all you have to do is unpack the zip package.
2. Assuming you downloaded and installed the Samsung USB Drivers already, turn off the tablet, Open Odin up, connect the tablet to the PC after running Odin, and hold Volume Down and Power Button. You will be presented with some text to press Volume Up to continue, and after that you will be in Download Mode. Odin should give you a Green or Blue light with COMX (X being a number), that means that there's a connection between your phone and Odin to flash the rom on it.
3. Load all relevant files from the unpacked ZIP to odin. BL to BL, AP to AP (this one will take a while, dont close odin if it looks like it's crashing), CP to CP, and HOME_CSC to CSC.
4. Start the Flash. If it works, your good, if it doesn't, no harm will be done.
If by any chance Odin fails, or Download Mode is not reachable, then you most definitely have a KNOX Enterprise managed device. I would advise you to now roam around looking for a workaround to take that off, first, you cant, second that puts you on a very dodgy position.
You'll be updated to October Patch, Android 12L, One UI 4.1.1.
Android 13 / One UI 5.0 is on the test firmware already, so that one is right around the corner too.
EDIT: Getting some mixed research about WWD. S22 in US seems to use it as a COMBO under a Group, like Europe is moving all countries (DBT, BTU, etc), to EUX under OXM. WWD seems to be for US models, but still, this is Phones. Another source is saying WWD is "Demo Units", stuff that is shown in Shops.
Click to expand...
Click to collapse
Yes I'll try this today. This may be a retail demo from Europe which would explain a lot.
I'll try the steps you've mentioned and hope for the best. Thank you.

Any luck? I'm in the exact same boat wat is not updating. If this is a ld then that may say why no update but our ld in store updates..... frustrated cause I love to demo our tabs but don't want to show all of the most outdated stuff....

nooney299 said:
Any luck? I'm in the exact same boat wat is not updating. If this is a ld then that may say why no update but our ld in store updates..... frustrated cause I love to demo our tabs but don't want to show all of the most outdated stuff....
Click to expand...
Click to collapse
I am also in same boat, were you able to figure it out?

Related

[Q] Kies stuck in update loop

I'm trying to update my S3 software by using Kies but in order to do this I have to update Kies to the latest version. However every time I do this Kies restarts and again says it needs to update to the same version (2.3.1.12064_9).
Can I get an Android update OTA or am I forced to use this itunes like P.O.C software?
If anyone has any suggestions it'd be appreciated, thanks.
Zammo76 said:
I'm trying to update my S3 software by using Kies but in order to do this I have to update Kies to the latest version. However every time I do this Kies restarts and again says it needs to update to the same version (2.3.1.12064_9).
Can I get an Android update OTA or am I forced to use this itunes like P.O.C software?
If anyone has any suggestions it'd be appreciated, thanks.
Click to expand...
Click to collapse
Uninstall Kies, reboot your pc and install the latest version of Kies from the samsung website. This should help.
It is the latest version from the website (I installed it today), but I'll give it a try anyhow.
The Kies in-program check for updates says there is a newer version than the one that is on the Samsung website for download. The website version is Kies_2.3.2.12054_20_1; the check for updates within the program itself lists a 2.3.2.12064_9.
I've tried to update from within the program running the program as admin and anything else I could think of but just like you it's stuck in an update loop. No OTA on AT&T here in the US either.
Good to know I'm not alone!
I tried re-installing Kies and still got the same BS loop.
There is an Android update too (I9300XXLFB) so this is very annoying. I guess I'll need to contact Samsung and find out what the hell is going on.
Whats wrong with being over to download updates OTA like with my old HTC phone, why has Samsung got to over complicate things?
I don't know where you are or what network you're on but keep in mind that the OTA updates are normally distributed by the carrier and not by Samsung directly. And any updates need to be customized for the specific carrier's specs so there will always be a lag between Samsung releasing an update and the carriers finally getting around to pushing it OTA (if they ever do; a carrier not bothering to release an update is not unheard of). That's one of the reasons why using a custom ROM is so desirable as often custom ROMs have the latest and greatest OS updates while the stock ROM will be behind sometimes for months.
is mine up to date?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note that I didn't update it after I got it, and when I connected it via kies no update
Kies
I am here in South Africa and I expect this type of thing here but world wide ????. Not even local support seems to know about this new version.:crying:
i have never had an OTA update, i have twice updated on kies, as i bought the phone sim free and not through a carrier. Perhaps that is why im not getting the updates through the OTA.
However i seem to have a different problem with kies. i have also done the above, and have the _9 version but mine although it connects through USB, when it comes to backing up the phone's info, it goes round and round trying to read the phone's items and then after 2 minutes brings up a screen saying: unexpected error, cannot backup etc...
I have emailed samsung yesterday and waiting for a reply from them...
i did manage to update, although my firmware was LFB, and of course updating a firmware keeps the phone's memory intact, but i really want to continue to be able to backup.
So it seems that new version of KIES may need an even newer one to fix those bugs.
EDIT: looks like kies is stuck trying to load my contacts! I think i may have found the culprit, but dont know how to solve it. It could before and i havent changed anything!
erikk said:
I don't know where you are or what network you're on but keep in mind that the OTA updates are normally distributed by the carrier and not by Samsung directly. And any updates need to be customized for the specific carrier's specs so there will always be a lag between Samsung releasing an update and the carriers finally getting around to pushing it OTA (if they ever do; a carrier not bothering to release an update is not unheard of). That's one of the reasons why using a custom ROM is so desirable as often custom ROMs have the latest and greatest OS updates while the stock ROM will be behind sometimes for months.
Click to expand...
Click to collapse
Thanks for the explanation, I know this is a possibility but I can't even get Kies to update to even see if my carrier (T-Mobile in the UK) has got around to releasing the Android update.
I don't want to root as I'd loose the ability to use Sky Go, and I've been trying to get this working for months on my other two rooted devices with no success.
I've now emailed Samsung so hopefully there'll be able to offer some advise.
Zammo76 said:
I'm trying to update my S3 software by using Kies but in order to do this I have to update Kies to the latest version. However every time I do this Kies restarts and again says it needs to update to the same version (2.3.1.12064_9).
Can I get an Android update OTA or am I forced to use this itunes like P.O.C software?
If anyone has any suggestions it'd be appreciated, thanks.
Click to expand...
Click to collapse
Same problem here. It starts installing then new version and when reaching 100% it reverts all files back to the old one...
So can't update my firmware :-(
Zammo76 said:
Thanks for the explanation, I know this is a possibility but I can't even get Kies to update to even see if my carrier (T-Mobile in the UK) has got around to releasing the Android update.
I don't want to root as I'd loose the ability to use Sky Go, and I've been trying to get this working for months on my other two rooted devices with no success.
I've now emailed Samsung so hopefully there'll be able to offer some advise.
Click to expand...
Click to collapse
I can tell you tmobile or any UK network have not released this yet like above they have to mess about with it first so kies won't tell you this, the kies update is from Samsung, I had a problem as well with kies updating itself so I uninstalled reboot laptop, reinstalled, then let it update it does take forever to do this so give it time.
Although my firmware update did download and it installed on the phone for some reason it failed and didn't actually install on the phone but plenty of people have been successful.
-------------------------------------
Xda signature.
To unroot and return to stock for warranty., watch this.
http://www.youtube.com/watch?v=_8Tga_yKywc&feature=youtube_gdata_player
I uninstalled Kies, rebooted, installed latest version of Kies from Samsung website, turned off AV, ran Kies, tried to update, and the same thing happened. Samsung support is just stalling. I don't know why they don't just upload the updated version to the Samsung website.
Solution to kies update loop
khund said:
Same problem here. It starts installing then new version and when reaching 100% it reverts all files back to the old one...
So can't update my firmware :-(
Click to expand...
Click to collapse
Found a less than ideal solution, but it allowed me to update my handset:
1. Open kies and let it try and update as usual, click more details.
2. Ctrl alt del to get a task manager up.
3. As soon as it has gone through all the files extracting and installing, and just as it starts to revert and uninstall the update, kill the update process.
4. Restart Kies and verify version installed in the about kies dialog.
nicklord said:
Found a less than ideal solution, but it allowed me to update my handset:
1. Open kies and let it try and update as usual, click more details.
2. Ctrl alt del to get a task manager up.
3. As soon as it has gone through all the files extracting and installing, and just as it starts to revert and uninstall the update, kill the update process.
4. Restart Kies and verify version installed in the about kies dialog.
Click to expand...
Click to collapse
I've been having the same problem but just tried that and it worked:good:. Can't thank you enough as i've been trying all afternoon to get the damn upgrade to work. Finally managed to upgrade the firmware aswell though it did take absolutely ages to download it. The whole thing is so ridiculous...why couldn't they just do an OTA update
Stopping in the middle of the installation didn't work for me. So I modified the KiesVersion.txt file that was in the Program Files folder to be the latest version number that it was saying I needed.
fishbulb15 said:
Stopping in the middle of the installation didn't work for me. So I modified the KiesVersion.txt file that was in the Program Files folder to be the latest version number that it was saying I needed.
Click to expand...
Click to collapse
You have to do it right at the end when the details change from extracting and installing to reverting but you have to be very quick before the installation ends.
HTC > Samsung
this works. might take a couple tries took me 2 but got it updated. this is why i have a HTC. this samsung kies **** is garbage. my sensation took a half hour to update. im already over 2 hours with my girlfriends s2 and i havent even started to download the new firmware 2 hours jst to get kies up and running.
The "kill the updater" trick worked for me, thanks.
I got this reply from Samsung and followed the steps and it actually worked!
Regarding this issue, please try reinstalling the Samsung KIES software. First uninstall Samsung KIES completely from your computer. Also, please uninstall any Samsung USB drivers that may be installed as well. Restart your computer after you do this.
After your computer has restarted, please download and install the latest version of the software from the link below.
Before you do this though, make sure that your PC has the minimum systems requirements, shown at the bottom of the download page, in order to run this software.
Note: Please use Internet Explorer to install the KIES software. Click the blue download button on the left on the screen and then select “Run”.
http://www.samsung.com/uk/kies
After you have reinstalled KIES make sure you have turned off Bluetooth and USB debugging on your handset (Settings, Applications, Development), also make sure the device is unlocked and on the home screen. Then connect your handset to the computer via a USB data cable and launch the KIES software. After a short time KIES should then recognise and display the device.
Not sure why it didn't work before, unless installing Kies through Google Chrome (my default browser) was causing an issue? Regardless though Kies is BS bring back OTA updates like my HTC had.

Fix Any Bricked Samsung - Snapdragon - Exynos - All regions and types

Re-Opening Thread, this guide can be used for any new Samsung phone, not only Note 7...
Welcome everyone,
I hope you all are good, well maybe not if you're here because of your phone got bricked...
So many people seems eager to Root their new Samsung Device (including Me) and My Phone got bricked...
To All who have Bricked their Phones...
Here is How I fixed it... (I have only tried SmartSwitch, other methods are provided if you know how to use them and please do this at your own risk) :fingers-crossed:
***SamFirm Method - Deprecated
1. Go to Updato Samsung Firmwares... and search for your device ex:SM-P585 ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Click on the desired firmware & write down the PDA, CSC, Phone and Product Code...
3. Download SamFirm from SamFirm...
4. Open Samfirm Enter device model, select manual & input the PDA, CSC, Phone and Product Code...
5. Click Download...
6. Open Odin and select AP and select the downloaded software image...
7. Enter Download Mode on your device...
8. Flash the Software Image...
Hopefully it would work... I'll Post screenshots Soon...
***Updato Method - UPDATE - It's the Best Way - Recommended - Sammobile Alternative
1. Go to Updato Samsung Firmwares... and search for your device ex:SM-N930 ...
2. Select & Download the software image...
3. Open Odin and select AP and select the downloaded software image...
4. Enter Download Mode on your device...
5. Flash the Software Image...
Hopefully it would work... I'll Post screenshots Soon...
***Sammobile Method - Not Recommended - Very slow Connection - Image Corruption chance High
1. Go to Sammobile Firmware... and search for your device ex: SM-N935 ...
2. Download the software image...
3. Open Odin and select AP and select the downloaded software image...
4. Enter Download Mode on your device...
5. Flash the Software Image...
Hopefully it would work... I'll Post screenshots Soon...
***SmartSwitch Method - No Longer Works
1. Go to Samsung Smart-Switch Here...
2. Download smart switch, open it and hit emergency recovery, then device initialization, enter "SM-XXXX" or whatever is after S_-____ and hit search...
In my case I put SM-N930FD, that's my Phone - Enter all CAPS ON...
3. Enter S/N on the back of the phone... Smart switch will try to fetch the ROM if available...
4. It will tell you that everything will be deleted and sign-out from google accounts... but you can't do anything so just proceed...
5. Then it will ask you to enter to the Download Mode or Odin Mode ( Vol Down + Home + Power ), continue ( Vol Up ) and connect your phone via USB to the PC...
6. Smart switch will start downloading the Image to Wipe the phone and reinstall the ROM again...
Unfortunately, I don't have a screenshot of this as I already have done all these steps... but it's nothing but a small window showing progress of download and install...
7. Leave the phone, Don't play with your PC... You can Pray or go do something good so that when you're back, the phone would be fresh as if you just bought it...
Unfortunately, I don't have a screenshot of this as I already have done all these steps... but it's nothing but a small window showing Device initialization complete, Hit OK and you're done...
It will take time but Hopefully, it fixes your phone as it did to mine...
Updates:
Update 16th Feb 2018:
SmartSwitch Method no longer works, Samsung has removed it...
Update 25th July 2017:
This is not related to Galaxy Note 7 anymore, it's a solution to any Samsung Phone...
Update 2nd October 2016:
User azzicles reported that in Odin you need to check update bootloader to succeed...
Great work putting this up together, But Should've posted in the guides section as this more of a guide rather than a Development thread.
JazonX said:
Great work putting this up together, But Should've posted in the guides section as this more of a guide rather than a Development thread.
Click to expand...
Click to collapse
Thank you,
I am still new to XDA and I wished to help those who bricked their phone...
When I bricked my phone, I was so sad that I'd have to wait for loooong time till I am able to fix it....
So I have done a bit of research if it's possible to do it through Samsung SmartSwitch,
after all when you boot your bricked phone it tells you use smartswitch or contact service center...
when I fixed my phone, I felt relieved and Wished to share my discovery to make those who bricked their phone relieved as well...
So I put the thread here...
If the admins see that the thread should be put in the Guides Section, then hopefully they'd tell me how to move it there...
Thank you for taking to time to post the solution.
Will this work with T-Mobile version? When I enter my S/N in SmartSwitch, it keeps erroring out when I click "search" and then SmartSwitch immediately closes... Any help, much appreciated!
Ker~Man said:
Will this work with T-Mobile version? When I enter my S/N in SmartSwitch, it keeps erroring out when I click "search" and then SmartSwitch immediately closes... Any help, much appreciated!
Click to expand...
Click to collapse
SmartSwitch Works with All Samsung Note 7 Phones and it's the safest tool to unbrick your phone...
The thing I noticed about SmartSwitch is it's case sensitive and the S/N at the back of your phone is tricky to the eye as it's small and light reflected easily could make you input it wrongly...
Revise what you Entered, better write it on the paper and count the characters...
The only error it would display is something like "Your phone is not supported yet" or "phone software not available" if your input is correct...
As I understand, you are stuck at step 3...
Please let me know if you still have issues, I'll do my best to help you...
Does it fix your missing recovery?
And no offence, please do not use so much color fonts in the post. It makes your article so difficult to read. Some of the colored sentences are even not import.
Using just bold, underlying, red , will be ok.
knifekid said:
Does it fix your missing recovery?
And no offence, please do not use so much color fonts in the post. It makes your article so difficult to read. Some of the colored sentences are even not import.
Using just bold, underlying, red , will be ok.
Click to expand...
Click to collapse
None taken, The reason I use colors is to highlight the important words in my post or reply... :angel:
Anyway, It will wipe your phone clean and re-install the phone software ( Recovery + ROM + Partitions.... Anything that got corrupted but not Odin or download mode)
So yes it will fix the missing recovery & The Phone will be as if you have just bought it... :good:
where did you buy your 930FD from?
Chord_Hugo87 said:
where did you buy your 930FD from?
Click to expand...
Click to collapse
Ordered from UAE - Dubai...
Dante63 said:
Ordered from UAE - Dubai...
Click to expand...
Click to collapse
which site? most site dont ship till the 26th
Chord_Hugo87 said:
which site? most site dont ship till the 26th
Click to expand...
Click to collapse
Actually, a friend was going to UAE...
great job this will help a lot of rooters much appreciated
Nothing works
I tried several times with several computers and still wont worki think i can never get passed the logo to be honest it lets me go in dowmload mode but cant flash anything anymore no recovery im not sure what do to with my phone now
Will this restore the phone to its very first firmware or the latest firmware?
busventinc said:
great job this will help a lot of rooters much appreciated
Click to expand...
Click to collapse
Thank you...
xstatik said:
I tried several times with several computers and still wont worki think i can never get passed the logo to be honest it lets me go in dowmload mode but cant flash anything anymore no recovery im not sure what do to with my phone now
Click to expand...
Click to collapse
Which step are you stuck at?
EarlZ said:
Will this restore the phone to its very first firmware or the latest firmware?
Click to expand...
Click to collapse
The latest firmware... But without patch updates... You'll have to update it yourself... Just 200MB...
Sent from my SM-N930FD using XDA-Developers mobile app
So its the firmware thst originally came with the device? There is an update for August so which will it install?
EarlZ said:
So its the firmware thst originally came with the device? There is an update for August so which will it install?
Click to expand...
Click to collapse
when you input the S/N, it locates the phone region, it searches for the latest firmware and installs it... Not the exact firmware that originally came with the device,
if say 6.X.X update rolled out then smartswitch will install that instead of the 6.0.1...
Patch Updates are done through the phone, they don't change firmware version...
same
hi, ty for efforts, appreciated,, i input serial number, hit enter n switch just closes after about 5 seconds,,,,,ps correct sn, used magnify from other phone and took photo lol, i got old eyes
David McCulloch said:
hi, ty for efforts, appreciated,, i input serial number, hit enter n switch just closes after about 5 seconds,,,,,ps correct sn, used magnify from other phone and took photo lol, i got old eyes
Click to expand...
Click to collapse
You're welcome...
If you're sure of S/N... Are you sure of the Model...? Remember I said case sensitive, meaning Uppercase... Else Reinstall SmartSwitch or Try another PC...
Sent from my SM-N930FD using XDA-Developers mobile app

[NABI][MTK][ROOT][MAGISK][RECOVERY] Nabi SE discussion thread

DISCLAIMER: Neither I nor XDA or the members of this site can be held responsible for any data loss or hardware damage caused by the use the tools, firmware and applications mentioned or linked to in this thread.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The nabi SE is an Android-based tablet computer produced by Mattel under the Fuhu Nabi line. Released in 2016, the SE runs on Android 6.0 "Marshmallow" utilising a MediaTek MT8127 system-on-chip. Like some of the tablets from their line-up, a number of variants themed after popular children's franchises by Mattel were also produced, differing only in bundled content, branding and certain exclusive apps e.g. streaming video players with variant-specific content; ROMs used for all nabi SE variants are largely the same and appear to be mutually compatible.
Tech specs:
1.3 Ghz MediaTek MT8127 quad-core processor
ARM Mali 450MP GPU
1GB RAM
7" capacitive touch screen with 1024x600 resolution
16GB ROM (8GB user-accessible, expandable to 32GB with a microSD card)
Android 6.0 Marshmallow with Blue Morpho UI
0.3 MP front camera
2 MP rear camera (720p video)
2500mAh rechargeable lithium-ion battery
Sensors: Accelerometer
GPS: no
FM radio: no
Depending on the variant, the tablet may also come bundled with content based on characters from their respective franchises. The American Girl edition for example has videos and games featuring characters from the line, namely Isabelle Dance Studio, Grace Sweet Shop, Maryellen Rocket Rally and Scene Sounds. As with most children's tablets, it has parental controls built in and Google Play services.
Magisk Root
So far Beta 16.3 is known to work (albeit with some issues) as previous versions churn out a corrupt image. I am not sure why flashing Magisk through TWRP won't work, but I might look into it some time.
Bootloader unlock
That in my opinion is what I like about the Nabi compared to the LeapFrog Epic I previously covered in another thread. Dunno if it does matter to unlock, but since there is at least some boot-level enforcement going on I'd say you should perform a bootloader unlock to be sure. Make sure to install ADB/Fastboot drivers, then in developer options, tick OEM Unlocking to allow the bootloader to be tampered with. Turn off the device, then reboot to fastboot mode by holding power and volume up for a few seconds until a DOS-ish prompt appears. Select fastboot mode, then press volume down. Now plug in the device to your PC, and in a command prompt, key in "fastboot oem unlock" sans quotes. A warning will then appear, which you should say yes to. If done properly, you should now have an unlocked Nabi SE.
Issues
Tablet is stuck in fastboot mode
I've heard from a number of parents over at the Nabi Facebook page that their children's tablets somehow get stuck at this prompt...
Code:
=> FASTBOOT mode...
or this...
Code:
Select Boot Mode:
[Recovery Mode]
[Fastboot Mode] <<=
[Normal Mode]
...likely due to kids unwittingly fiddling around with the volume and power buttons. I've made a small batch-based utility for getting them out of limbo, but as I only own a regular Nabi SE and an American Girl variant, I'd like to ask those who own the other editions to PM me for details. Once that's done I'll release it ASAP.
Forced encryption
Encryption is permanently enabled by default in this device. Which is a good thing as far as security goes, but it's crapshoot when you're trying to make backups. I think this could be fixed with Magisk but I haven't thoroughly tested it yet. You can however format /data and mount it through TWRP though, if that's any consolation.
Stock ROMs:
NOTE: The following ROMs can only be flashed through SP Flash Tool v5.1532. Make sure to have a full backup of your device ready before attempting any flashing procedures!
Code:
NBTY07SMKG-US (vanilla Nabi SE):
https://androidfilehost.com/?fid=15664248565197191210
NBTY07SMKG-US-AG (American Girl edition - ABD7AG20160823A00):
https://mega.nz/#!b5RgFTgK!da1QDYFo3EMZI5SqNtY2lHPUqz2g6eUJJTI_rF1t4wI
https://www.androidfilehost.com/?fid=11410963190603899020
NBTY07SMKG-US-BB (Barbie edition):
https://www.4shared.com/s/fvn6nAvZ_gm
https://androidfilehost.com/?fid=11410963190603905324
NBTY07SMKG-US-HW (Hot Wheels edition):
https://www.4shared.com/s/fa3Ez7lgOfi
https://androidfilehost.com/?fid=11410963190603905325
Nabi SE demo-to-retail conversion package (will post instructions later):
https://mega.nz/#!HxQGWA5Z!7A4N1FDWeSDGBFG3ASmLydWqjeIUP8z253HXZJ7Cxpk
Custom recovery images:
TWRP 3.0.2.0
NOTE: Same note as the full scatter packages above. Can be flashed either through fastboot or using SP Flash Tool. If you are unable to boot to fastboot mode in order to do a bootloader unlock and thus flash the following recoveries, try flashing this LK binary attached in this post.
Code:
https://github.com/huckleberrypie/device_Mattel_NabiSE
https://github.com/TeamWin/device_Mattel_NabiSE
More screenshots can be found here:
https://imgur.com/a/JT1HC
TWRP 3.0.2.0 for American Girl edition
NOTE: Same note as the full scatter packages above. Can be flashed either through fastboot or using SP Flash Tool.
Code:
https://github.com/huckleberrypie/device_Mattel_NabiSE/releases/tag/1.0-AG
More screenshots can be found here:
https://imgur.com/a/oyPO2I0
Carliv Touch Recovery
Mad props to AMR Development for this one.
Code:
https://mega.nz/#!z0ZHwC4a!2AlpIQJTxJnpVYa29ZFKqXQzQThO-vBvS4xnBQndhCg
Source tree: https://mega.nz/#!v0YlCDJI!5NXZcsJrJf-JdxHCcC_CiSXtXZwCENfr5rkdMBfQyh8
More screenshots can be found here:
https://imgur.com/a/mZR3f
Custom ROMs:
TBD; debloated stock ROM being planned
Known variants
NBTY07SMKG-US / Nabi SE
3.0.9 - ABD7TY20160831A00
NBTY07SMKG-US-AG / Nabi SE (American Girl)
3.0.10 - ABD7AG20160823A00
NBTY07SMKG-US-BB / Nabi SE (Barbie)
???
NBTY07SMKG-US-HW / Nabi SE (Hot Wheels)
???
NBTY07SMKG-US-DM / Nabi SE (Store Demo Unit)
3.0
NBTY07SMKG-US-TF / Nabi SE (Thomas and Friends; cancelled)
???
I'm getting bootloops after following directions directly on a nabi se, not asking for responsibility but maybe people shouldn't follow this guide...
Gigabuster said:
I'm getting bootloops after following directions directly on a nabi se, not asking for responsibility but maybe people shouldn't follow this guide...
Click to expand...
Click to collapse
Did you flash this on a stock vanilla Nabi SE using SP Flash Tool? I never had any problems getting it to run on my SE; I don't get how this has been causing bootloops on your unit. :/
instructions
blakegriplingph said:
Did you flash this on a stock vanilla Nabi SE using SP Flash Tool? I never had any problems getting it to run on my SE; I don't get how this has been causing bootloops on your unit. :/
Click to expand...
Click to collapse
c
Can you help me i been trying to get a demo to retail. but i been unable im not a computer tech i been able to get into de fastboot mode , but i dont know what to do next.
monas3 said:
c
Can you help me i been trying to get a demo to retail. but i been unable im not a computer tech i been able to get into de fastboot mode , but i dont know what to do next.
Click to expand...
Click to collapse
In this case you don't have to use fastboot. Turn off the device (there doesn't seem to be any other method of turning it off other than draining the battery on purpose :/), then perform a readback using SP Flash Tool. I don't have the scatter file from the demo unit atm (addresses/offsets specific to demo are in that text file), but I'll PM you the full details ASAP.
There, just built another TWRP variant for the American Girl edition. Dunno if anyone would care but I decided to do so should anyone somehow get their hands on such a unit. Links are on my original post.
blakegriplingph said:
There, just built another TWRP variant for the American Girl edition. Dunno if anyone would care but I decided to do so should anyone somehow get their hands on such a unit. Links are on my original post.
Click to expand...
Click to collapse
Thank you!
cjlopez213 said:
Thank you!
Click to expand...
Click to collapse
I presume you happen to have an American Girl tablet as well, right? Just let me know if you run into anything and make sure you made a backup of your tablet's firmware first, OK?
blakegriplingph said:
I presume you happen to have an American Girl tablet as well, right? Just let me know if you run into anything and make sure you made a backup of your tablet's firmware first, OK?
Click to expand...
Click to collapse
Yeah I got a Barbie for my youngest and an American Girl for my older daughter. I think the Barbie tablet is fine without root. I'll be sure to keep you posted in case I get some errors.
cjlopez213 said:
Yeah I got a Barbie for my youngest and an American Girl for my older daughter. I think the Barbie tablet is fine without root. I'll be sure to keep you posted in case I get some errors.
Click to expand...
Click to collapse
Cool! I've actually been looking for someone who owns a Barbie and Hot Wheels edition for quite some time lol. Needed the firmware from those for my collection, and of course for the greater good, if you know what I mean.
Anyone up to coaxing Nabi into spilling at least some kernel sources for the SE? The GPL sources page has sources for the MT8127 variant of the Junior, but the one for the SE is MIA for whatever reason. A friend of mine has tried contacting their Twitter to no avail. :/
Excuse the double-post, but for the sake of science I decided to tear down one of my SEs to see what's inside besides that FCC approval listing. By the looks of it, the SE uses a subframe presumably for a bit more rigidity. The way the SE is constructed is a bit of a double-edged sword, i.e. you can make it less susceptible to kids screwing the lid off, but servicing or replacing the battery can be quite a chore to pull off. At least the logic board has some test points labeled
https://imgur.com/a/IvLrErv
There, just uploaded the Barbie and Hot Wheels ROMs. A friend of mine just got his hands on the Barbie and Hot Wheels tablets so it had to be done.
Nabi Elev-8
Hi, I was just wondering if anyone has been able to root the Nabi Elev-8? If anyone could point me in the direction to try to root this, I would very much appreciate it.
DaddyShortLeggs said:
Hi, I was just wondering if anyone has been able to root the Nabi Elev-8? If anyone could point me in the direction to try to root this, I would very much appreciate it.
Click to expand...
Click to collapse
Not sure about that tbh as I don't have an Elev-8 with me.
blakegriplingph said:
Not sure about that tbh as I don't have an Elev-8 with me.
Click to expand...
Click to collapse
Well I downloaded King root and tried to root it twice and it didn't work. I woke this morning and tried it again but this time it successfully rooted. Does anyone know if I can install twrp and any roms out there for it?
DaddyShortLeggs said:
Well I downloaded King root and tried to root it twice and it didn't work. I woke this morning and tried it again but this time it successfully rooted. Does anyone know if I can install twrp and any roms out there for it?
Click to expand...
Click to collapse
Not from what I can tell. All I know is only the original Nabi, the Nabi 2, the DreamTab and the SE have support but not the Elev-8.
blakegriplingph said:
Not from what I can tell. All I know is only the original Nabi, the Nabi 2, the DreamTab and the SE have support but not the Elev-8.
Click to expand...
Click to collapse
Damn that sucks. Well I at least got it working better than what it has been before I rooted it. Now I just have to figure out how to use SuperSU-Me Pro to get rid of King root and purify.
DaddyShortLeggs said:
Damn that sucks. Well I at least got it working better than what it has been before I rooted it. Now I just have to figure out how to use SuperSU-Me Pro to get rid of King root and purify.
Click to expand...
Click to collapse
I have a question but let me say that I uninstalled kingroot and purify and I successfully unlocked my bootloader. Is there a way that I could get twrp for my Nabi Elev-8?

[QUESTION] ROOT/TWERP/Bootloader Unlock Samsung Galaxy-A11 SM-A115U

I searched the web and the forum I couldn't find any info about SM-A115U ( Boost Mobile USA)
I have Samsung 6 edge plus & I was able to root it back in 2017 using CF AutoRoot with SM-G928C (zenlte-zenltejv).
SM-A115U seems like it's one of the challenging phone to have the bootloader unlocked, I checked the 'changing time method prior to 7 days' and going to 'updating firmware' then I enabled Dev. Mode but it didn't work (the OEM unlock option is not showing)
Therefore does anyone have any Idea?
How can I unlock the bootloader myself ?
I patched with Magisk but when flashing with ODIN 13.4.1 It didn't work due to the bootloader being locked,again the OEM unlock option is not showing.
I wish I knew. I'm trying to do the same thing. There are directions for OTHER models - apparently we need to change the firmware from the U to the M (Latin America / Peru etc) --- that will give us the oem unlock option...
unfortunately for me I've tried a few firmware's and it seems there is -something - not compatible which is causing an error in ODIN to fail. -- Likely the fact that we have the 115U and I'm trying to put software from the 115 (something else - that has oem unlock option)
I am under the impression at this point that 100% of every US samsung snapdragon processor on every model number phone is impossible to root.
-add to that something called Qualcomm secure boot that is also apparently a problem now; my knowledge id vague on this point... but I believe we will need to buy an Exynos version from overseas to get the bootloader unlocked.
I would love for someone to show us otherwise how to do it.
I know from researching the s20 us version that some one is offering a paid service to use proprietary samsung tools that CAN unlock the snapdragon bootloader; for a fee.
I dont know:
who it is
how to contact them
how much it costs
or if it can be done for the a115u.
edit - this link leads to more info - much more complete
Galaxy A11 SM-A115 Need TWRP
I have this device rooted with magisk BUT cant find way to properly port a qualcomm twrp from similar devices i just need help to get started with custom recovery if i can get one to boot i might be able to fiqure out the rest if any "Bugs" are...
forum.xda-developers.com
the a115u doesnt offer 'oem unlock' in developer mode.
The a115u1 DOES. The following is a link that worked for me; slow download speeds so expect a 3 hour wait... unless you pay.
i am still working on it; will post more if I have success.
A115u1 firmware: A115U1UEU2ATG2 / OYM2ATG2 v10
PDA/AP Version A115U1UEU2ATG2
CSC Version A115U1OYM2ATG2
MODEM/CP Version A115U1UEU2ATG2
Region USC — United States
Build Date 2020-07-03
Changelist 18814262
OS Q
OS Version 10
https://www.full-repair-firmware.co...DL0ExMTVVMVVFVTJBVEcyL0ExMTVVMU9ZTTJBVEcyLw==
New Baseband is
A115U1UEU2ATG2
SO what does the UEU mean?
Update; I was having difficulty getting into download mode.. still cant seem to manually achieve it.
I can access a couple recovery menus but not the download mode one (without the app)
To get into Recovery you:
Turn off the device.
Press and hold the Volume Up key, then press and hold the Power key.
When you see Samsung Galaxy A11, release the Power key but continue holding the Volume Up key.
When you see the Android Recovery screen, release the Volume Up key.
To get the (blue) screen for unlocking bootloader:
Access the Blue custom OS menu:
Press and hold the Volume Up & DOWN keys, then press and hold the Power key.
When you see Samsung Galaxy A11, release the Power key but continue holding the Volume Up & DOWN keys.
When you see the Android Recovery screen, release the Volume Up & Down keys.
Phone will go black - reboot- SAMSUNG logo will appear and you'll need to wait while it reinstalls the OS...
Then you need to re open Developer options and usb debugging etc ...
Now you can work on TWRP and Root/ Magisk (I dont know how yet but will get there)
The A05U is in the same boat as the A115U. https://forum.xda-developers.com/t/need-default-prop-file-for-sm-a205.4125991/
There you will find my working theory that may help solve this puzzle. Anyone with a little experience can get a hex editor and i will pm you the offset addr. in which the firmware keys reside within the AP image...(only for the 205...for now)...Also, another attack vector is to decompile the system image and go in and change default.prop OEM_UNLOCK_SUPPORTED=0 TO 1, recompile and package it as a standalone .tar or .zip and flash in Odin (assume patched version 3.14.1 cuz i had some success FRP'ing with it). The reason i recommend standalone is due to the fact that fota.zip is also signed with the same 8 digit key as the binaries, however the zip file itself is encrypted and will not allow for manipulation to the contents.
Fastboot, ADB, and so far Combo Files (of which i do have for the A115, [205 combos were worthless] and am reluctantly about to tes, as this is my Daily Driver). So if anyone is interested in A115 Engineer binary, I have acquired one [link on pm].
Back to vector 1...I am about to begin the tedious process of aqcuiring the firmware keys for the A115, once I have them it will hopefully be a matter of time before this is done. All we need is for one character to change: OEM_UNLOCK_SUPPORTED = 0. It needs to be 1. But, finding digital signatures enables us the ability to rebrand, mix n' match and circumvent firmware device specific subjectivity.
Blombardo said:
edit - this link leads to more info - much more complete
Galaxy A11 SM-A115 Need TWRP
I have this device rooted with magisk BUT cant find way to properly port a qualcomm twrp from similar devices i just need help to get started with custom recovery if i can get one to boot i might be able to fiqure out the rest if any "Bugs" are...
forum.xda-developers.com
the a115u doesnt offer 'oem unlock' in developer mode.
The a115u1 DOES. The following is a link that worked for me; slow download speeds so expect a 3 hour wait... unless you pay.
i am still working on it; will post more if I have success.
A115u1 firmware: A115U1UEU2ATG2 / OYM2ATG2 v10
PDA/AP Version A115U1UEU2ATG2
CSC Version A115U1OYM2ATG2
MODEM/CP Version A115U1UEU2ATG2
Region USC — United States
Build Date 2020-07-03
Changelist 18814262
OS Q
OS Version 10
https://www.full-repair-firmware.co...DL0ExMTVVMVVFVTJBVEcyL0ExMTVVMU9ZTTJBVEcyLw==
New Baseband is
A115U1UEU2ATG2
SO what does the UEU mean?
Update; I was having difficulty getting into download mode.. still cant seem to manually achieve it.
I can access a couple recovery menus but not the download mode one (without the app)
To get into Recovery you:
Turn off the device.
Press and hold the Volume Up key, then press and hold the Power key.
When you see Samsung Galaxy A11, release the Power key but continue holding the Volume Up key.
When you see the Android Recovery screen, release the Volume Up key.
To get the (blue) screen for unlocking bootloader:
Access the Blue custom OS menu:
Press and hold the Volume Up & DOWN keys, then press and hold the Power key.
When you see Samsung Galaxy A11, release the Power key but continue holding the Volume Up & DOWN keys.
When you see the Android Recovery screen, release the Volume Up & Down keys.
Phone will go black - reboot- SAMSUNG logo will appear and you'll need to wait while it reinstalls the OS...
Then you need to re open Developer options and usb debugging etc ...
Now you can work on TWRP and Root/ Magisk (I dont know how yet but will get there)
Click to expand...
Click to collapse
I call bullcrap. I've been trying all afternoon to root a SM-A115U. I was finally able to flash A115U1U (took 2 hours). However, I have had absolutely NO LUCK obtaining root with Magisk. Please explain your process using Magisk, what version Odin, what version Magisk, what process. Because all I have had is soft bricks.
Show us a picture of root checker saying its rooted...because I bet it isnt.
Sorry this phone is a piece of garbage... I wont use it and am not interested in wasting my time messing with it...
I assure you it is rooted - took me about 12 hours to get it there and when I saw no TWRP - and No NFC on the hardware side.. I was done with this thing.
If I dig it out of the shelf where its collecting dust - and turn it on - and get a screenshot - and I remember to log back in here.. I'll give it to you...
But it is 100% properly rooted with magisk - took me ages to figure it out and I soft bricked it once in the middle. there is no way I could possibly walk you through it and I probably couldnt do it again myself unless I spent another 5 hours messing around with it.
I simply followed tutorials - then downloaded multiple versions of Odin - found a shady looking one from some unsupported place with developer names I couldnt even tell you... it was a custom version of odin for sure.
On the magisk side i just used the official one and followed their directions on how to make the file on the phone / move to pc/ modify / move back to phone and install...
on the TWRP side I found a developer who walked me through how to request the source code from samsung; I did.. they provided it.. and I gave up at that point... the dev was willing to help but I dont care anymore and am looking for a better phone...
Blombardo said:
Sorry this phone is a piece of garbage... I wont use it and am not interested in wasting my time messing with it...
I assure you it is rooted - took me about 12 hours to get it there and when I saw no TWRP - and No NFC on the hardware side.. I was done with this thing.
If I dig it out of the shelf where its collecting dust - and turn it on - and get a screenshot - and I remember to log back in here.. I'll give it to you...
But it is 100% properly rooted with magisk - took me ages to figure it out and I soft bricked it once in the middle. there is no way I could possibly walk you through it and I probably couldnt do it again myself unless I spent another 5 hours messing around with it.
I simply followed tutorials - then downloaded multiple versions of Odin - found a shady looking one from some unsupported place with developer names I couldnt even tell you... it was a custom version of odin for sure.
On the magisk side i just used the official one and followed their directions on how to make the file on the phone / move to pc/ modify / move back to phone and install...
on the TWRP side I found a developer who walked me through how to request the source code from samsung; I did.. they provided it.. and I gave up at that point... the dev was willing to help but I dont care anymore and am looking for a better phone.
Click to expand...
Click to collapse
Since it's just sitting on a shelf collecting dust I would gladly take it off your hands to see what I can figure out, see we can make rooting and custom recovery a bit less complicated for other users. I can't risk bricking mine at the moment as its my daily driver and my hubby would likely have a melt down if I did something to it if interested pm me
it took me almost 10 minutes to get that crappy a11 to boot up; catch up with a million notifications and open the root checker for you...
I'm not lying nor an idiot; I am also not interested in dealing with jerks who are rude. At this point ZagNutty you will need to be more polite to me and others if you expect help... Generally I'm not in a position to offer assistance with Android development as I'm a novice myself.
Here is your image...proving my root; or that I have good photoshop skills...
a11 Root Checker Basic.jpg
drive.google.com
@giddingsgrl I would be happy to sell this phone so long as I wasnt loosing too much money on the deal; I'm not giving it away... I will just add it to the pile of random devices on my shelf for when we have game night and I need spares for my drunk buddies...
send me a PM if you want to buy. I'm not looking to sell but would for just below retail.
I will add the patched version of odin I used to my temp folder on google drive; set to delete june 2021.
Temp delete on June 2021 - Google Drive
drive.google.com
I had a heck of a time getting the bootloader to activate on this model; I had to use a third party tool to reboot into bootloader a few times = tool is called Force Load bootloader Samsung+300K+Tool
and is in that to be deleted folder I shared.== also found online randomly
-And LAST here is my 21 page document on the a11; which I had no intention of sharing with teh world... but I redacted my imei and now its safe to share... not all is valid; much is my own personal notes... so dont look at this like some tutorial that will be perfect... it includes steps I took that nearly Bricked this thing - along with causing a bootloop I had to fix -- then a wrong storage size problem; along with my ways of correcting the issues to make it work... SO TREAD LIGHTLY or you will bootloop or break it...
Android Samsung a115u
0Basic tutorial: https://forum.xda-developers.com/t/guide-the-correct-way-to-flash-custom-roms.3885962/ General Steps to take on PC I. Device Drivers 2. Android SDK 3. Random tools for your device if needed 4. New Firmware (if needed) plus GAPPS if not included 5. Custom Recovery - TWRP 6. Get...
docs.google.com
I achieved Magisk root on my A115U by first crossflashing it to the U1 unlocked firmware using the patched Odin found here: https://forum.xda-developers.com/t/patched-odin-3-13-1.3762572/
Then I enabled the OEM unlock option in the dev settings, went to download mode, and unlocked the bootloader. After that, I followed the instructions here to get Magisk up and running. It is a fairly simple process.
I even only flashed the U1 bootloader over the original locked down U bootloader for ****s and giggles at first and the phone to my surprise booted up normally, it still reported itself as being a SM-A115U, but the OEM unlock option actually appeared in the dev settings. Great method if you don't want to factory reset the phone.
Proof:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can see that the phone's original CSC is TMK, which means that it was Metro by T-Mobile branded when it left the factory. I have since sold the phone though, so I cannot help further.
Before:
After:
You have to properly extract the boot image from the A11's Odin firmware files and patch it using the Magisk app to get root, otherwise you will softbrick like I did when I tried the first time. My screenshot shows Magisk as being installed, which means that the phone has root. Also here's my screenshot of the Viper4Android Magisk module installed and working perfectly, that's more then enough proof that I got the A11 rooted.
I showed you my ss of the root checker showing that I had root... another person has confirmed its working.. thats two people who have root on this paper weight.
How about you pony up 100 bucks and I'll ship you mine... its rooted and working fine... lol
What is the best TWRP to use with the SM-A115U/SM-A115U1?
MOD ACTION:
Thread cleaned.
Guys, please post your messages in a polite manner and be civil to each other. Remember what Rule 2 says:
2. Member conduct.
2.1 Language: XDA is a worldwide community. As a result, what may be OK to say in your part of the world, may not be OK elsewhere. Please don't direct profanity, sexually explicit language or other offensive content toward Members or their work. Conversely, while reading posts from other members, remember that the word you find offensive may not be offensive to the writer. Tolerance is a two-way street.
2.2 Nudity: XDA is used by people of all ages, including minors. It is unacceptable to post nude or pornographic imagery, which includes the exposure of male or female genitalia and / or female breasts.
2.3 Flaming / Lack of respect: XDA is about sharing and this does not involve virtual yelling (flaming) or rudeness. Flaming or posting with a lack of respect is unacceptable. Treat new members in the manner in which you would like to have been treated when you were a new member. When dealing with any member, provide them with guidance, advice and instructions when you can, showing them respect and courtesy. Never post in a demanding, argumentative, disrespectful or self-righteous manner.
2.4 Personal attacks, racial, political and / or religious discussions: XDA is a discussion forum about certain mobile phones. Mobile phones are not racial, political, religious or personally offensive and therefore, none of these types of discussions are permitted on XDA.
2.5 All members are expected to read and adhere to the XDA rules.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
raykai said:
What is the best TWRP to use with the SM-A115U/SM-A115U1?
Click to expand...
Click to collapse
Hey, saw your PM, but just going to post here so anyone can see this. Put the wrong link, sorry. This is the link: https://blog.d204n6.com/2020/08/rooting-samsung-devices-2020-with.html
And I used Frija to download the latest U1 firmware. Search for it in the forum search bar and download it. As for TWRP, another XDA member made an unofficial build for the A11 here.
@TNSMANI Is it possible if you or another admin can create a device forum for the Galaxy A11?
Wish39 said:
@TNSMANI Is it possible if you or another admin can create a device forum for the Galaxy A11?
Click to expand...
Click to collapse
It will have to be done by the Admins not by a Moderator. Please post your request HERE with justification.
Zagnutty said:
I call bullcrap. I've been trying all afternoon to root a SM-A115U. I was finally able to flash A115U1U (took 2 hours). However, I have had absolutely NO LUCK obtaining root with Magisk. Please explain your process using Magisk, what version Odin, what version Magisk, what process. Because all I have had is soft bricks.
Show us a picture of root checker saying its rooted...because I bet it isnt.
Click to expand...
Click to collapse
Can you tell me what you used to flash the a115u1? I'm trying to do the same with a a115u and failing everywhere
Bringtheice said:
Can you tell me what you used to flash the a115u1? I'm trying to do the same with a a115u and failing everywhere
Click to expand...
Click to collapse
I also already have a115u1 rooted with magisk and twrp installed and xposed framework. It was passing safety net before I installed the xposed
Wish39 said:
You have to properly extract the boot image from the A11's Odin firmware files and patch it using the Magisk app to get root, otherwise you will softbrick like I did when I tried the first time. My screenshot shows Magisk as being installed, which means that the phone has root. Also here's my screenshot of the Viper4Android Magisk module installed and working perfectly, that's more then enough proof that I got the A11 rooted.View attachment 5265759
Click to expand...
Click to collapse
How did you get viper working properly?
Wish39 said:
Hey, saw your PM, but just going to post here so anyone can see this. Put the wrong link, sorry. This is the link: https://blog.d204n6.com/2020/08/rooting-samsung-devices-2020-with.html
And I used Frija to download the latest U1 firmware. Search for it in the forum search bar and download it. As for TWRP, another XDA member made an unofficial build for the A11 here.
@TNSMANI Is it possible if you or another admin can create a device forum for the Galaxy A11?
Click to expand...
Click to collapse
Hi there, I want to know how do you choose which U1 firmware to download? one with the same CSC such as ATT for ATT (for example) or XAA for ATT would be fine as well?

Samsung Galaxy A205U (A20) Stuck on "Samsung Galaxy A20" logo

My mom got a replacement A14 5G due to the A20 not booting, and I am gonna use the A20 as one of my phones.
It's stuck on the logo screen (the screen before it boots) and I am trying to get it on.
It doesn't connect to my laptop, either. So I can't flash any firmware.
I tried factory resetting and clearing cache, it also does not boot.
I tried restarting and it said at the top in red text: "Could not do normal boot." and some string of letters after and "Error" then force shut off.
Is there any way to get around this?
Thanks in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Creepergames360 said:
My mom got a replacement A14 5G due to the A20 not booting, and I am gonna use the A20 as one of my phones.
It's stuck on the logo screen (the screen before it boots) and I am trying to get it on.
It doesn't connect to my laptop, either. So I can't flash any firmware.
I tried factory resetting and clearing cache, it also does not boot.
I tried restarting and it said at the top in red text: "Could not do normal boot." and some string of letters after and "Error" then force shut off.
Is there any way to get around this?
Thanks in advance.View attachment 5940493
Click to expand...
Click to collapse
Cannot boot to Odin?
With my SM-A202F I need to hold + and - Volume and plug in USB cable for Download Mode...
You tried this?
To enter Download Mode aka Odin Mode?
Best Regards
adfree said:
With my SM-A202F I need to hold + and - Volume and plug in USB cable for Download Mode...
You tried this?
To enter Download Mode aka Odin Mode?
Best Regards
Click to expand...
Click to collapse
He needs to find the right firmware. Since his is a U model,probably is Carrier locked. He needs to determine his carrier to find right carrier.
webhook said:
Cannot boot to Odin?
Click to expand...
Click to collapse
No.
webhook said:
He needs to find the right firmware. Since his is a U model,probably is Carrier locked. He needs to determine his carrier to find right carrier.
Click to expand...
Click to collapse
I am on MetroPCS.
If he can manage to see Download Mode screen...
This include usefull infos...
Btw.
Maybe I can make eToken aka steady.bin for this Model... depend on Bootloader Version...
Best Regards
Only to be sure...
If you do this like on Video visible... then your Phone explode?
Cooking? Or swimming?
Or enters Download Mode?
Best Regards
adfree said:
If he can manage to see Download Mode screen...
This include usefull infos...
Btw.
Maybe I can make eToken aka steady.bin for this Model... depend on Bootloader Version...
Best Regards
Click to expand...
Click to collapse
So, it connected.
adfree said:
Only to be sure...
If you do this like on Video visible... then your Phone explode?
Cooking? Or swimming?
Or enters Download Mode?
Best Regards
Click to expand...
Click to collapse
Yeah it entered download mode.
Samsung Galaxy A20 Firmware Download SM-A205U Free Download
Samsung Galaxy A20 Firmware Download SM-A205U Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
TMK
If I can see correct.
With eToken seems i can not help... As you are on BL 13... as it seems...
Sorry I have only old Cert...
FRP seems on...
Best Regards
adfree said:
Samsung Galaxy A20 Firmware Download SM-A205U Free Download
Samsung Galaxy A20 Firmware Download SM-A205U Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
TMK
If I can see correct.
With eToken seems i can not help... As you are on BL 13... as it seems...
Sorry I have only old Cert...
FRP seems on...
Best Regards
Click to expand...
Click to collapse
Maybe you can flash XAA or unbranded software for unlocked model. Not too sure if it works though.
FRP...
If D is 13...
Then only 1 firmware... Because you can't downgrade...
A205USQSDBWC2
My suggestion try TMK... last ehm latest and look what happens...
Good Luck.
Best Regards
http://fota-cloud-dn.ospserver.net/firmware/TMK/SM-A205U/version.xml
BWC2 seems last...
Notify Update
So in theory your device have seen this Firmware allready...
Anyway. To flash this Firmware again to look if this boot proper... before next...
Best Regards
Creepergames360 said:
Yeah it entered download mode.
Click to expand...
Click to collapse
adfree said:
http://fota-cloud-dn.ospserver.net/firmware/TMK/SM-A205U/version.xml
BWC2 seems last...
Notify Update
So in theory your device have seen this Firmware allready...
Anyway. To flash this Firmware again to look if this boot proper... before next...
Best Regards
Click to expand...
Click to collapse
I tried flashing a combination firmware and it says "Please get the approval to use factory binaries" and a string of letters that say "PIT".
Strange.
I was sure my suggestion was to flash Stock Firmware for TMK...
No idea if you find your answer here:
[THEAD ARCHIVED]
UPDATE: I am marking this thread as archived as the original purpose of it was fulfilled.
forum.xda-developers.com
Best Regards
adfree said:
Strange.
I was sure my suggestion was to flash Stock Firmware for TMK...
No idea if you find your answer here:
[THEAD ARCHIVED]
UPDATE: I am marking this thread as archived as the original purpose of it was fulfilled.
forum.xda-developers.com
Best Regards
Click to expand...
Click to collapse
It seems to be flashing!
adfree said:
Strange.
I was sure my suggestion was to flash Stock Firmware for TMK...
No idea if you find your answer here:
[THEAD ARCHIVED]
UPDATE: I am marking this thread as archived as the original purpose of it was fulfilled.
forum.xda-developers.com
Best Regards
Click to expand...
Click to collapse
So it froze on the USERDATA screen and now it doesn't boot. It also doesn't flash anymore. And it gives an error every time I start it up.
Creepergames360 said:
So it froze on the USERDATA screen and now it doesn't boot. It also doesn't flash anymore. And it gives an error every time I start it up. View attachment 5940555
Click to expand...
Click to collapse
What error?
webhook said:
What error?
Click to expand...
Click to collapse
SOFTWARE UPDATE FAILED
"Your device didn't update successfully. Use the Verizon Software Repair Assistant on a computer to repair your device and complete the update."
Creepergames360 said:
SOFTWARE UPDATE FAILED
"Your device didn't update successfully. Use the Verizon Software Repair Assistant on a computer to repair your device and complete the update."
Click to expand...
Click to collapse
You can try this: https://www.verizon.com/support/knowledge-base-80201/
Or flash the unbranded software (Find your model number and XAA unbranded software.)

Categories

Resources