Related
IF YOU'RE COMING FROM ANOTHER THREAD OR SITE, AND RUNNING THESE MODULES ON A DEVICE OTHER THAN A 3/3T, DON'T POST YOUR ISSUES HERE!
THESE WERE STRICTLY CONFIGURED FOR THE 3/3T ON OXYGEN OS!
Here are a few I've put together after snooping around the OnePlus threads and converting various mods into modules.
These modules WILL NOT work on Magisk builds older than 13.
I have a folder of modules for Magisk 11 and older (no longer maintained, nor supported) at the end of this post.
Requirements:
- Stock OxygenOS 4.1.6, Open Beta 12, or newer.
- Magisk 13.3 installed by following the installation guide: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
After installing, download any module and flash in TWRP.
NOTE: None of these modules are SystemUI or framework mods as doing such have potential to cause soft bricking, leading to doing a factory reset.
Magisk modules
Google Pixel Launcher with Essentials and Extras v2.0
Includes Pixel Launcher, along with the Google's Wallpaper Picker, and the Live Wallpapers APKs from the Google's Pixel factory image.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated Pixel Launcher to 7.1.13862848
- Updated Nexus Launcher Icons to 7.1.2
- Updated Google Wallpaper Images to 20161104_RC01
- Updated Wallpapers to 1.1.153125266
- Updated Live Earth Wallpapers to 7.1.2
- Updated Live Data Wallpapers to 7.1.2
-----------------------------------------------------------------------------------------
Google Pixel Sound Set v2.0
Replaces the stock OnePlus UI, alarm, notification, and ringtone sounds with the set from the Pixel phone.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated sounds to match the Android O beta image for Google Pixel.
-----------------------------------------------------------------------------------------
Google Dialer with CallerID and Lookup v2.1
Google Dialer, along with the permissions XMLs and required framework to allow full functionality, including Caller ID and Lookup. Be sure to disable the stock OnePlus Dialer, and set Google Dialer as default.
v2.1 Changelog:
- Replace OPSystemUI with a blank template for Magisk as recent versions of OOS causes conflict with Google Dialer's Answer/Decline buttons.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated Google Contacts to 2.0.10
- Updated Google Dialer to 10.1.161735957
-----------------------------------------------------------------------------------------
Google Daydream VR v2.0
Allow the use of using Daydream VR, and enables downloading of additional Daydream apps from the Play Store.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- android.hardware.vr.high_performance.xml (taken from a factory image for the Google Pixel) is now included
instead of editing another XML with the needed entries
-----------------------------------------------------------------------------------------
Chrome Home Page Button v2.0
Enables the home button in Chrome, and an option to set a default home page in Chrome's Settings.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
Display SELinux Status (Enforcing/Permissive) v2.1
Expose the status of SELinux (Enforcing or Permissive) at the bottom of Settings > About Phone.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
v2.1 Changelog:
- Removed unneeded files from the module as leaving them in could cause problems with the device booting properly.
-----------------------------------------------------------------------------------------
EmojiOne Emoji Set v2.0
Swap the default emoji set from OnePlus with the ones from EmojiOne.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated the emoji set to 3.1.1 (July 12, 2017)
-----------------------------------------------------------------------------------------
Android O Emoji Set v2.1
Swap the default emoji set from OnePlus with the ones from Android O.
v2.1 Changelog:
- Updated the emoji set with the ones from Android O Developer Preview 4.
More information about the changes here on Android Police.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
2.4GHz WiFI Channel Bonding v2.0
As OnePlus (still) haven't fixed this, the module combines two 20MHz channels on a 2.4GHz WiFi connection into one for improved Internet speed.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
Allow AudioServer/MediaServer Access v2.1
Apps such as ViPER4Android needs access to AudioServer (or MediaServer in other ROMs) to work correctly, while the kernel is set to Enforcing.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated the script to execute sepolicy-inject in the new location with Magisk 13.1+ (again...)
Update: Removed. No longer needed since this module was added back into the ViPER4Android packs.
Update 2: Restored.
v2.1 Changelog:
- Removed unneeded files from the module as leaving them in could cause problems with the device booting properly.
-----------------------------------------------------------------------------------------
ViPER4Android FX 2.3.4.0 (Super High Quality) v2.1
Not much to say about this module, except that this version, in my opinion, is the last version which allows selecting 3 different quality drivers. This one runs the Super High Quality driver.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Removed the sepolicy-inject script in favor of a separate module (Allow AudioServer/MediaServer Access) for easier maintenance
v2.1 Changelog:
- Re-added the AudioServer/ModuleServer script into this module since for some reason, having it separate was causing devices to not boot.
- There is no need to use Allow AudioServer/MediaServer Access with this module.
-----------------------------------------------------------------------------------------
ViPER4Android FX 2.3.4.0 (Super High Quality) with Dolby Atmos 6.5 v2.1
Same as the ViPER4Android module above, except this one includes Dolby Atmos 6.5.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Removed the sepolicy-inject script in favor of a separate module (Allow AudioServer/MediaServer Access) for easier maintenance
v2.1 Changelog:
- Re-added the AudioServer/ModuleServer script into this module since for some reason, having it separate was causing devices to not boot.
- There is no need to use Allow AudioServer/MediaServer Access with this module.
-----------------------------------------------------------------------------------------
NEW
ViPER4Android FX 2.5.0.5 Base v2.5
This module installs the needed files for use with ViPER4Android version 2.5.0.5. A version 2.5.0.5 app of ViPER4Android (Original or Materialized) must be sideloaded as it is not included in this module.
More information here: https://forum.xda-developers.com/showpost.php?p=73357433&postcount=450
v2.5 Changelog:
- Initial release
-----------------------------------------------------------------------------------------
NEW
ViPER4Android FX 2.5.0.5 Base with Dolby Atmos 6.5 v2.5
This module installs the needed files for use with ViPER4Android 2.5.0.5, and also installs Dolby Atmos 6.5. A version 2.5.0.5 app of ViPER4Android (Original or Materialized) must be sideloaded as it is not included in this module.
More information here: https://forum.xda-developers.com/showpost.php?p=73357433&postcount=450
v2.5 Changelog:
- Initial release
-----------------------------------------------------------------------------------------
Gaming Controller Keylayouts v2.0
Adds keylayouts for use with Xbox 360, Xbox One, Xbox One S, and Nvidia Shield controllers.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
Stereo Speaker and Microphone Gain Tweak v2.0
Created by @magura320, this module allows the earphone to be used as a speaker, and mods the microphone pickup when recording video.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
Extended Volume Steps v2.1
Extend the media volumes to 30 steps, and the call volume to 15 steps. Credits to the article on the front page of XDA by Mishaal Rahman.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
v2.1 Changelog:
- Removed unneeded files from the module as leaving them in could cause problems with the device booting properly.
-----------------------------------------------------------------------------------------
Magisk-ready modules
Busybox Installer 1.27.1
Created by @osm0sis, this version of Busybox has never given me any problems during my use. Highly recommended.
Simply flash in TWRP. The installer will detect Magisk, build the module, and install it.
Be sure to disable Busybox in the Magisk Manager app, followed by rebooting to make use of this.
-----------------------------------------------------------------------------------------
Folder dump of old Modules for Magisk 11 or lower
Note: Modules in this folder are no longer supported or maintained. They are here in case someone out there still wants to use them.
Very helpful thread thanks
is your snapdragon camera extremely buggy? Only a few features work for me.
Most of the mods just need root..can be SuperSU also..
Pretty nifty stuff. I'm assuming you can't make a center clock magisk module, can you?
Thanks for the modules! The ones I've downloaded so far seem to work except for the Snapdragon camera, which doesn't open.
Edit: nevermind the camera works after granting permissions manually.
You might want to consider adding these modules to the magisk repo.
@Spasticdroid how would you compare your aptx module to this one? https://forum.xda-developers.com/apps/magisk/magisk-oneplus-3-aptx-res-audio-t3541904
knpk13 said:
Pretty nifty stuff. I'm assuming you can't make a center clock magisk module, can you?
Thanks for the modules! The ones I've downloaded so far seem to work except for the Snapdragon camera, which doesn't open.
Edit: nevermind the camera works after granting permissions manually.
You might want to consider adding these modules to the magisk repo.
@Spasticdroid how would you compare your aptx module to this one? https://forum.xda-developers.com/apps/magisk/magisk-oneplus-3-aptx-res-audio-t3541904
Click to expand...
Click to collapse
For the center clock mod, I assume that would fall under modding SystemUI.apk or OPSystemUI.apk. I've tested a few mods from this sub-forum in the form of modules, and ended up having to factory reset my phone after disabling that module.
As for the codec, this one has the APT-X HD library included.
Thanks a lot for this awesome thread and these infos
all works like a charme
I installed the Root, Busybox and the Magisk as recommended in your walkthrough.
I'm especially interested in Viper, but I have an Issue. It seems that the effect will apply to all other apps (youtube for instance), but not to Google Play music. I tried playing with the settings... My selinux is permissive, the drivers are fully activated (viper), but I fear it has to do with the fact that google play music tries to access the OP3T's standard equalizer, which cannot be bypassed by Viper.
If I were to take a wild guess, I'd say that replacing the menu from /Sound/Audio Tuner from the default OP3T to Viper should help Google Play music. Any ideas?
matthias4 said:
I installed the Root, Busybox and the Magisk as recommended in your walkthrough.
I'm especially interested in Viper, but I have an Issue. It seems that the effect will apply to all other apps (youtube for instance), but not to Google Play music. I tried playing with the settings... My selinux is permissive, the drivers are fully activated (viper), but I fear it has to do with the fact that google play music tries to access the OP3T's standard equalizer, which cannot be bypassed by Viper.
If I were to take a wild guess, I'd say that replacing the menu from /Sound/Audio Tuner from the default OP3T to Viper should help Google Play music. Any ideas?
Click to expand...
Click to collapse
Long post reply about GPM here: https://forum.xda-developers.com/showpost.php?p=70804660&postcount=11
Short reply, run ViPER as "Compatible" under FX Compatible Mode for use with GPM.
I've tried disabling anything that has remotely anything to do with audio, which seems to be Dirac and Dirac Control Service on this phone, to solve the issue, but no go.
Also, you don't have to run your kernel in Permissive with this module of ViPER. It's already set up to allow running in Enforcing.
matthias4 said:
I installed the Root, Busybox and the Magisk as recommended in your walkthrough.
I'm especially interested in Viper, but I have an Issue. It seems that the effect will apply to all other apps (youtube for instance), but not to Google Play music. I tried playing with the settings... My selinux is permissive, the drivers are fully activated (viper), but I fear it has to do with the fact that google play music tries to access the OP3T's standard equalizer, which cannot be bypassed by Viper.
If I were to take a wild guess, I'd say that replacing the menu from /Sound/Audio Tuner from the default OP3T to Viper should help Google Play music. Any ideas?
Click to expand...
Click to collapse
Sooo I looked here and there and foud that the FX Compatible mode fixed it. Play Music works with Viper again. Thanks OP for the great pack. That bass, though.
Is there any way to rever to stock speaker configuretion? Just wondering before flashing the mod.
How about Google pixel navibar ?
weriwd said:
Is there any way to rever to stock speaker configuretion? Just wondering before flashing the mod.
Click to expand...
Click to collapse
Disable or uninstall the magisk mod
Hey great work! Thanks for this.
I do have a question though, what's the difference between your Google assistant vs the one available to download within magisk?
Thanks!
kinfam said:
Hey great work! Thanks for this.
I do have a question though, what's the difference between your Google assistant vs the one available to download within magisk?
Thanks!
Click to expand...
Click to collapse
I never bothered with the download menu in Magisk, but I just took a look, and mine does the same thing the one on the Magisk repo does, which is adding the "ro.opa.eligible_device=true" to build.prop, and not spoofing a phone as a Pixel. Something a lot of older non-Magisk mods do.
Same with the EmojiOne module.
As for the Controller Keylayout module on the repo, it's also similar, except mine has the keylayout files for the Nvidia Shield Controllers included.
saberzaid said:
How about Google pixel navibar ?
Click to expand...
Click to collapse
Not doing that as that requires System UI and/or framework-res.apk modding. Similar reason why is explained in this post: https://forum.xda-developers.com/on...gisk-modules-oneplus-3t-t3548446/post70826963
Great mods
I'm using a bunch on Oneplus 3 with open beta 11, if anyone wanted to know for compatibility reasons
You know that aptx wont work.
The HAL and hardware doesnt support it.
I have install viper addon but dont see the app. How can i start viper? Stereo Mod also not work.
pahapoika91 said:
You know that aptx wont work.
The HAL and hardware doesnt support it.
Click to expand...
Click to collapse
Source(s) for this claim please.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup.
Instructions
1. Install latest TWRP
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
almost all
Known Issues
-
LineageOS Builds
Code:
few notes about 20190316 update:
1. New kernel, our is very old 3.18.14, new one is 3.18.91. this is latest M105FDDU1ASB2 from relative exynos7870
2. Our wifi driver depends on the kernel. I can't just take a new kernel (or update the current one), it will most likely cause a kernel panic with the current wifi module. For some reason, samsung cut out the wifi sources/config from kernel. So I spent a week and was able to add the source of the wifi driver to the kernel and made a config for it. As result we can forgot about stand alone .ko wifi module, now it's part of kernel. And as bonus: our old wifi module's version is: 4.0.10.205Y_0903, new one is: 4.0.11.213X
3. I reviewed the defconfigs, make it similar to m10 from latest kernel, updated the file systems config (thanks to [user=5480152]@followmsi[/user]), activated pie sdcardfs sources, fixed vibrator for T585 (it was big misunderstand with dtb blocks)
4. I fixed the build logic of the dtb part (now it's part of defconfig)
5. I added doze service (power consumption)
6. I added fingerprint from xiaomi sagit (for pass safetynet check in Magisk, thanks [user=5480152]@followmsi[/user])
Code:
few notes about 20181223 update:
1. rebrand wifi, now it is loaded during the run of the wifi service, and not in init scripts, as before
2. made small updates in hwc for smooth gui
3. fixed gps for T585, may be it's quite slow, but working
4. fixed hostap for T585 (it's still buggy and sometimes turn on not from first attempt, but working)
Code:
few notes about 20181204 update:
this is huge update, a lot of changes here:
1. update for hew hardware support, now we use proprietary files from latest 8.1
- new mali driver r22 (early was old r15 version)
- new camera (new with exynoscamera3, it was missed for our tablets in 7.0)
- new OMX libs
2. latest official kernel (I asked samsung about sources few weeks ago)
- with new r22 mali support
- with new wifi driver
3. now with new hardware almost no any shims (only one missed symbol for camera), now no any shims for OMX with libui and etc
P.s. thanks [user=5480152]@followmsi[/user] for some fixes and hints.
SM-T580
17. 20191211: december security patch: https://drive.google.com/file/d/1gkEA0A7VH0DGIvI2yJWYWSwyfCbXdTn3/view?usp=sharing
16. 20191113: november security patch: https://drive.google.com/file/d/1xt8L8C8WuhEzA8x4mHyErzrmq3Ylm8Qr/view?usp=sharing
15. 20191023: october security patch: https://drive.google.com/file/d/17zVXccAuJV-Ojyh8gJBJBG6oM-IqnZ_7/view?usp=sharing
14. 20190911: fix front camera, september security patch: https://drive.google.com/file/d/1RkzvX9FE3ilut01OBSgOFP45JgICzcVl/view?usp=sharing
13. 20190811: august security patch: https://drive.google.com/file/d/16-7M4rc0q-IzCVUnTaSy9wwEOJZG6Zdg/view?usp=sharing
12. 20190707: july security patch: https://drive.google.com/file/d/1CkiJjWDfY1pq5KcF_kCNUQtqAA6n6ouw/view?usp=sharing
11. 20190518: update wifi driver (4.0.10.206A_20181017): https://drive.google.com/file/d/1v33yHO7zBi0UCswqZaB7vj1aYJvCtvq0/view?usp=sharing
10. 20190331: another test version: wifi driver from codeaurora, correspond to our stock 4.0.10.205 version, update wifi\bt drivers and configs, remove mobicore, 3.18.137 kernel with OC (thanks @followmsi), update interfaces (health, trust, netd, composer, mapper) to new versions: https://drive.google.com/file/d/1m77GggfDTINHqxaXxzTrR0MMsThnO_ni/view?usp=sharing
9. 20190320: fix flip: https://drive.google.com/file/d/1WO1tAx8wyMJim-07Z3oaea6YWiuwZmmo/view?usp=sharing
8. 20190319: fix flip: https://drive.google.com/file/d/18tcp3h7Eh06OAPWnWTAJQqgtTo0e58rg/view?usp=sharing
7. 20190316: test version with huge update (but it look very stable): fix vibrator, new kernel, new defconfig, new wifi driver, doze (see notes): https://drive.google.com/file/d/1Kf42kG8dnK7lxwBKXr2SjVvyqmH6bzZC/view?usp=sharing
6. 20190208: security patch level - february 5, 2019: https://drive.google.com/open?id=1p9rQWrHg-icHdm94g1PohaeOzwoDZhOs
5. 20190126: https://drive.google.com/file/d/1cqt_kSSjDzkDETpVhuyzkCF9EMVo5oDd/view?usp=sharing
4. 20181223: https://drive.google.com/file/d/1fWRfB3kl2vAnCwUEVzRPGOysm7Vs594k/view?usp=sharing
3. 20181204: https://drive.google.com/file/d/1xI_H5HP9gS1iL8femUaw5UltHzBrCkae/view?usp=sharing
2. 20181027: https://drive.google.com/file/d/1EAGuOUcL5Rw6_E5ZPGurRo9NYVx9dgNy/view?usp=sharing
1. 20180920: https://drive.google.com/file/d/1BFxGIqJKb0VYyaPyq9ejhWBHIOcfJ7kN/view?usp=sharing
SM-T585
15. 20191211: december security patch: https://drive.google.com/file/d/1-SjMSP6fhk8XsQ1IBZj1I2psKLaZT55Y/view?usp=sharing
14. 20191113: november security patch: https://drive.google.com/file/d/1E8KZdoXWXyZU8xop3OtdZISCX6v5fmnd/view?usp=sharing
13. 20191023: october security patch: https://drive.google.com/file/d/1o5EiqTDawP_cZYEMHKePxEGsLONw5iSh/view?usp=sharing
12. 20190911: fix front camera, september security patch: https://drive.google.com/file/d/1cz4ThdAxVFfnbk9-1rHbUd0_ue9RHOb5/view?usp=sharing
11. 20190811: august security patch: https://drive.google.com/file/d/1tY8WNyVkqS7cCeP82H8SF0n-QTlZVZtt/view?usp=sharing
10. 20190707: july security patch: https://drive.google.com/file/d/1HZoLhDRrOTU2I2a1walYPbhg35CVJCvp/view?usp=sharing
9. 20190518: update wifi driver (4.0.10.206A_20181017): https://drive.google.com/file/d/1zPZM0Z9ItaZgfiZd13x4zT495L5LP5ux/view?usp=sharing
8. 20190331: another test version: wifi driver from codeaurora, correspond to our stock 4.0.10.205 version, update wifi\bt drivers and configs, remove mobicore, 3.18.137 kernel with OC (thanks @followmsi), update interfaces (health, trust, netd, composer, mapper) to new versions: https://drive.google.com/file/d/16JdWMFQLFj1lsTZ1LcJkS-B_suHQUDmJ/view?usp=sharing
7. 20190320: fix flip: https://drive.google.com/file/d/1NgVwKv_58nzO_HnPIOzPE_iCqhl9XbH1/view?usp=sharing
6. 20190319: fix flip, access point, gps: https://drive.google.com/file/d/1Qr62AXurpt97UyNMz8Po8eYauiFQDuJJ/view?usp=sharing
5. 20190316: test version with huge update (but it look very stable): fix vibrator, new kernel, new defconfig, new wifi driver, doze (see notes): https://drive.google.com/file/d/1tk2hEe0yo4Bi9TdXVELEJr71vwl5AhE8/view?usp=sharing
4. 20190208: security patch level - february 5, 2019: https://drive.google.com/open?id=1StiJuRDl5DMERHOhkpxKfJvrGRgay2tH
3. 20190126: https://drive.google.com/file/d/1pEpEtf0vf9AUNtrkhXHilE0QO9okboIi/view?usp=sharing
2. 20181223: https://drive.google.com/file/d/1bYv4SpBAnXHr6Q7xw7CX2eCLicI-WUKm/view?usp=sharing
1. 20181204: https://drive.google.com/file/d/1FQL9SRNqHFOozlcJfSDs96VW344tTl3f/view?usp=sharing
Gapps
https://opengapps.org
Platform: ARM64
Android: 9.0
Variant: any
Root
Install official Magisk. if Magisk Manager missed in apps - install Magisk Manager apk
TWRP
official twrp:
SM-T580: https://twrp.me/samsung/samsunggalaxytaba101wifi2016.html
SM-T585: https://twrp.me/samsung/samsunggalaxytaba101lte2016.html
Sources
Sources: https://github.com/Lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870
Device: https://github.com/Valera1978/android_device_samsung_gtaxlwifi
Vendor: https://github.com/Valera1978/android_vendor_samsung_gtaxlwifi
Thanks
Thanks to LineageOS team
Right now I have only the SM-T580. Soon will back my SM-T585 and I will then make Lineage 16.0 for SM-T585 too.
Can you release this for the T350?
Valera1978 said:
Right now I have only the SM-T580. Soon will back my SM-T585 and I will then make Lineage 16.0 for SM-T585 too.
Click to expand...
Click to collapse
I can't wait for 585!!!
Does 3.5 jack works on this rom?
I am asking this because it was dead on 64-bit treble Oreo/Pie and it was not mentioned in bugs section too.
tank0412 said:
Does 3.5 jack works on this rom?
I am asking this because it was dead on 64-bit treble Oreo/Pie and it was not mentioned in bugs section too.
Click to expand...
Click to collapse
The connection works, have tested.
Is the pie guesture navbar avaliable?
Cast not working
Good work.:good: Seems to work well. But, as with every other 64bit ROM I've tried, casting to a regular Chromecast dongle just gives a black screen and no audio. People with a Chromecast Ultra dongle tell me theirs works, but I'm retired and living on SS, so I'm not going to spend for a new dongle when it works fine in 32bit RR Oreo.
Since this seems to be a problem with all 64bit ROMs, and not just this one, I guess I'll just have to wait until it's fixed somewhere up the line.:crying:
Nice work! Would it be possible to get the pie gestures or navbar customization options added in the settings?
Currently the dark or black theme for the UI doesn't work.
As for the Chromecast problem that Lewmur is reporting as not working: can anybody confirm this? For me it is rather vital it works.
And what is actually meant by the "FC problem" with the camera. Does it just mean it is "f*cked up" or what ?
Thanks...
Valera1978 said:
Right now I have only the SM-T580. Soon will back my SM-T585 and I will then make Lineage 16.0 for SM-T585 too.
Click to expand...
Click to collapse
Really looking forward for that build. Will try it as soon as released on my T585.
I tried "Cast" with my Microsoft Wireless Display Adapter - does not work Seems to be the same than with the Android dongles.
Will this work on the P580, just without the ability to use the pen? I don't frequently use or even really like the pen anyway, so I'm fine with that, I bought the S-Pen version for the extra gig of RAM.
Good Rom, thanx. But for me GPS not working. Can you fix it please.
I have installed the Rom for a few days ago.
It's works fine and the battery is okay.
But, I have found 2 Problems / fails.
1. I can not wake up the tablet with the homebutton.
2. the Displays goes short black, when I turn it from vertical to horizontal.
Sorry for my english
AlbertHB said:
I have installed the Rom for a few days ago.
It's works fine and the battery is okay.
But, I have found 2 Problems / fails.
1. I can not wake up the tablet with the homebutton.
2. the Displays goes short black, when I turn it from vertical to horizontal.
Sorry for my english
Click to expand...
Click to collapse
Those to are lineage related i think.
Installed it on my sm-t580 and works perfekt.
Gesendet von meinem HTC U11 mit Tapatalk
Keep getting an error:7 in twrp when I go to flash the rom. Any suggestions? Also any alternate links to d/l file from?
arachniac1 said:
Keep getting an error:7 in twrp when I go to flash the rom.
Click to expand...
Click to collapse
Hi,
error 7 means (AFAIK) that the image does not fit the model of your device.
Do you have the SM-T580?
Yes, I have the Samsung tab a SM-T580 (2016) wifi gtaxlwifi. Do you think I need a different version of twrp?
As I said several times, if someone starts to build the current version of the lineage that I do, I completely close the project.
In May, I closed the port, based on 10 android and now the time to completely close all work on exynos7870. There was only one reason why I didn't do it earlier - I promised to fix the sound during calls in the LTE version. Now all done, I dont have any desire and motivation to do anything for the exynos7870.
This decision is final, I switched now to the work on note pro 12.2 wifi variant, my smart home and think about starting tab s6.
Thanks to everyone who has been with me all these years, I will see you on other projects.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup.
Instructions
1. Install latest TWRP
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
almost all
Known Issues
Lineage Builds
SM-T580
15. 20200815: august security patch: https://drive.google.com/file/d/1m67wMYmMbQOCoNLxalgJ9Pv6T7ruQ2G6/view?usp=sharing
14. 20200630: june security patch, review device tree, switch to samsung stock sound: https://drive.google.com/file/d/1xgvXjydnklYZeVHz6Mumgf7jUAm6oSEz/view?usp=sharing
13. 20200412: april security patch: https://drive.google.com/file/d/1Isqa8WAlghmCGTMSGnKEsfUX9dUicM0n/view?usp=sharing
12. 20200211: latest sources, February security patch: https://drive.google.com/file/d/1jY2riYpLUJ8EFtOMFSXo9o57_Ijr-qVm/view?usp=sharing
11. 20200113: latest sources, January security patch: https://drive.google.com/file/d/1hnEUDgcugxBLbhQw5d-q9mU75rierlZX/view?usp=sharing
10. 20191202: rollback video driver to r22, merge kernel up to 3.18.140 (thanks @followmsi), aptx driver (thanks @followmsi): https://drive.google.com/file/d/1K_K6yfJHmjCNJSR12eAh46-7FhagcT4Z/view?usp=sharing
9. 20191116: november security update: https://drive.google.com/file/d/1CcX6FnTon8OxM99qbUad9NW6rPrJbUgw/view?usp=sharing
8. 20191114: beta version: update video driver up to r28, update omx codecs, latest updates from @followmsi: https://drive.google.com/file/d/18axNa2sq6ekZeADBzTZeXlOOaJ1dg8WN/view?usp=sharing
7. 20191028: disable Codec2.0 components (long delay on start youtube) (thanks @followmsi), fix vulkan libs (thanks @followmsi): https://drive.google.com/file/d/1mAAEstZz9sOSCFWZiujaGKv-kkslIEwV/view?usp=sharing
6. 20191013: audio from sources: https://drive.google.com/file/d/1R6JDLG-H8bP6eGvex7R2PTYsCbrfQpdu/view?usp=sharing
5. 20191007: fix sensors: https://drive.google.com/file/d/1XsQ5qlP22XBGFQK6o1zKT0GLbVd_WlC7/view?usp=sharing
4. 20191003: https://drive.google.com/file/d/1LpthwW1Lf4fJW0nGwsThnJcZ8ToTKpUf/view?usp=sharing
3. 20190929: improved stability: https://drive.google.com/file/d/1qfKSQhDOI4LkthCpOckJLew0zIAZHo67/view?usp=sharing
2. 20190928: fix charger, home button: https://drive.google.com/file/d/1HBaqEwLux9XjTVgHT3IGMXnrCuJaqgTw/view?usp=sharing
1. 20190926: https://drive.google.com/file/d/1z5VCwOX9M8-ckb1Wt75oON6aUjMpx2hT/view?usp=sharing
SM-T585
15. 20200815: august security patch: https://drive.google.com/file/d/1OgIcsnfRRr5bFx5gd1kvKvtb8lELIMQa/view?usp=sharing
14. 20200630: june security patch, review device tree, switch to samsung stock sound: https://drive.google.com/file/d/110Zz5mlotOnDuFAjtuC5vNKa4VU1N0_I/view?usp=sharing
13. 20200412: april security patch: https://drive.google.com/file/d/1-llAbO2lZQ2T1qq743MxXZNtuHp7eAUX/view?usp=sharing
12. 20200211: latest sources, February security patch: https://drive.google.com/file/d/1l0APlqEK20cgJIGbBzaaekBIJrNFkilr/view?usp=sharing
11. 20200113: latest sources, January security patch: https://drive.google.com/file/d/1OskSZS28m268HRcTeTqFO_HQKB7NgWky/view?usp=sharing
10. 20191202: rollback video driver to r22, merge kernel up to 3.18.140 (thanks @followmsi), aptx driver (thanks @followmsi), fix hotspot: https://drive.google.com/file/d/1hbwkqI1jpctUUitA0Zg1a3LPj02KfSTS/view?usp=sharing
9. 20191116: november security update: https://drive.google.com/file/d/1eb_RdaAw6JSCNb_EsSUsPQnvCqGF_OeF/view?usp=sharing
8. 20191114: beta version: update video driver up to r28, update omx codecs, latest updates from @followmsi: https://drive.google.com/file/d/1cewbOdJapapRjBbk1X8k2mv9B5viBPlD/view?usp=sharing
7. 20191028: disable Codec2.0 components (long delay on start youtube) (thanks @followmsi), fix vulkan libs (thanks @followmsi), fix hotspot (there is still a bug - you cannot turn on wifi after activating a hotspot? need reboot tablet, but at least hotspot working): https://drive.google.com/file/d/1mqsNknYnJSh5cbml7dQ-xd5m0a-KlyCm/view?usp=sharing
6. 20191013: audio from sources: https://drive.google.com/file/d/1ymo05w9m9xukDsfLrZz6iBJMKNgarF4x/view?usp=sharing
5. 20191007: fix sensors: https://drive.google.com/file/d/14jOLZjLPyClboBZ8H3C2O6Dt0kFmXghS/view?usp=sharing
4. 20191003: ril: https://drive.google.com/file/d/18ZPRh19Rao1xRPQ5zI9jz7WfYIdonLZ2/view?usp=sharing
3. 20190929: improved stability: https://drive.google.com/file/d/1H5iinjtP2MBObqE-QWqWP0IMN_rRqK9Y/view?usp=sharing
2. 20190928: fixed charger, home button: https://drive.google.com/file/d/1bog0dKKJ17eXa7vgu9cB0K1U8XWTqBzb/view?usp=sharing
1. 20190926: https://drive.google.com/file/d/1Inx1A-6VNqtJJhTO3rmodKL2tiS1x8LH/view?usp=sharing
Gapps
https://opengapps.org
Platform: ARM64
Android: 10.0
Root
Install latest magisk from canary channel (version 20.1+): https://forum.xda-developers.com/apps/magisk/dev-magisk-canary-channel-bleeding-edge-t3839337
TWRP
official twrp:
SM-T580: https://twrp.me/samsung/samsunggalaxytaba101wifi2016.html
SM-T585: https://twrp.me/samsung/samsunggalaxytaba101lte2016.html
Sources
Sources: https://github.com/lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870
Device: https://github.com/Valera1978/android_device_samsung_gtaxllte and https://github.com/Valera1978/android_device_samsung_gtaxlwifi
Vendor: https://github.com/Valera1978/android_vendor_samsung_gtaxllte and https://github.com/Valera1978/android_vendor_samsung_gtaxlwifi
Thanks
Thanks to LineageOS team
XDA:DevDB Information
[ROM][SM-T580][SM-T585][UNOFFICIAL] Lineage 17.0 | Android 10 Q | 64bit, ROM for the Samsung Galaxy Tab A series
Contributors
Valera1978, Valera1978
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Based On: lineage
Version Information
Status: Beta
Created 2019-09-27
Last Updated 2019-09-27
Finally, I finished the first version of the new android q.
Initially I thought it would be an easy walk. But google in the new version made a huge amount of changes. And I spend about weeks to made something working.
I rebuild the config, wrote a library with sensors from scratch, there were big problems with wifi and sound. For the sound, I had to build a 32bit version to get the missing libraries.
hello how r u?
thx for your great works,
i always try your roms and you are the best
please is there any bugs for t585 before i try it?
and can u tell me how can i backup all of my phone with internal storage like norton ghost on windows pc?
can u tell me your telegram channel?
Hi, thanks for your great work.
I have installed and tested. For now this I have found:
- Magisk 19.3 and 19.4 do not work. Do not start the rom after installation.
- The battery percentage cannot be displayed in the status bar.
Seems to work GREAT on the 580, the only problem i have is I cant use the home button to wake the tablet. I've tried to configure the buttons in setting but it doesn't work. Only the power button will wake it....
michaeljr10wv said:
Seems to work GREAT on the 580, the only problem i have is I cant use the home button to wake the tablet. I've tried to configure the buttons in setting but it doesn't work. Only the power button will wake it....
Click to expand...
Click to collapse
Same here thanks for rom Valera
When my T580 boots, I get a message saying there is an internal error and to contact the manufacturer. I just ignore it and everything seems to work ok. That and the battery % are the only two nits I've come across so far.
lewmur said:
When my T580 boots, I get a message saying there is an internal error and to contact the manufacturer. I just ignore it and everything seems to work ok. That and the battery % are the only two nits I've come across so far.
Click to expand...
Click to collapse
I have that fault also with SM-T580 and in the Xiaomi Mi A1. It is a fault of Lineage. Just ignore it.
Clash Royale and Brawl Stars work great. The tablet is very fluid.
Great rom, first custom rome redirects the music via usb to my external dac without
extra app!!! Thanks for your great work Valera1978!
Thanks Valera
It works much smoother than stock and earlier aosp.
In addition to what the colleagues mentioned, it happens to me that in Google Chrome I open two tabs and restart the tablet
On the other hand with Firefox in a quick test of several tabs this did not happen.
Thank you for your spectacular work.
Thanks for the Android 10. Fast rom but some random reboot.
This rom look awsome, i will flash it when i will be able to unlock my tablet with the home button
Reboots
Updated to the 09/28 version. Have a problem with the tablet rebooting. I'm trying to use AZ Recorder to record streams from Tubi TV. Start AZ and then Chrome and try to load the Tubi site and the tablet reboots. Did the same thing on the earlier version.
New version 20190929. Hope random reboots now gone away. Was done set of fixes.
Checking few hrs, no any reboots.
Magisk 19.3 and 19.4 unsupported
Nuzza said:
Magisk 19.3 and 19.4 unsupported
Click to expand...
Click to collapse
Yes, checked a bit, magisk modifing init in the boot and somehow corrupt it and then on load init cann't get partitions information from dtb.
And internal su also not finished yet.
My primary phone is xiaomi mi9 - more then month I'm on android q and magisk 19.3 working great here.
I'll back to check magisk soon, I need root too.
Nuzza said:
Magisk 19.3 and 19.4 unsupported
Click to expand...
Click to collapse
I thought Android 10 you need the Magisk 19.5, still canary builds so might have some issues.
Github Tree
Zip File
You can give it a try if you want
Thanks, valera. But dont' work accelerator.
Keeps giving random errors on the sm-t580
Thanks for update. Random reboot go away. I found few bug. Accelerator and recent files display issue. Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 19.1 Official and currently built by LineageOS official infrastructure.
17.1 has never been official (and it's upstream dead since 31st December 2021)
18.1 is official, discontinued builds since 2nd May 2022
19.1 is official and built weekly.
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
What's working:
Everything
Known issues:
Honestly at this time, nothing?
Camera Notes
ANX camera is not recomended and will most probably NOT work.
To get a fully working camera try one of the gcams here.
Do not forget to copy&load the associated xml file!
Official LOS uses oss camera service, so xml written for other custom roms might not work.
The gcams at the above link have modified xmls for LOS.
Download:
There is also a MIcroG build if you don't like Google Apps!
LineageOS 19.1 Official
LineageOS 17.1 builds [21st December 2021, last build ever]
If you care for official microg builds, check here they will be ready when they will be ready, those builds are not done by me nor supported by me, do not ask me about it.
There is also, for help and support, the:
Telegram Support Group
Instructions:
Make sure to flash at the very minimum firmware 12.5.7.0 (anything newer will work) from XiaomiFirmwareUpdater firmware page
(For 17.1 <<only>> : flash VENDOR + FIRMWARE from Android 10, do not use Android 11)
Download this build and Magisk (optionally) and gapps (optionally).
Put the zip on your MicroSD (suggested) or connect via USB to PC.
Boot to recovery (latest TWRP only is suggested! OrangeFox has issues).
Wipe Dalvik, Cache and format data. This IS NOT OPTIONAL!
Reboot recovery after wipe and format.
Flash this ROM zip...
... flash gapps zip ...
... If you want Magisk, flash zip ...
Reboot and enjoy!
If you have any issues flashing, like persistent GApps or booting issues, try to cleanup the phone with the following procedure:
Download a full MIUI rom recovery package from XiaomiFirmwareUpdater MIUI page
... (make sure you download the full rom package for RECOVERY, it is about 2.4Gb!) ...
From recovery, flash the zip file. This will cleanup all the partitions.
Now flash again this ROM.
This problem is related to the fact that TWRP and OrangeFox both don't support dynamic partitions properly yet.
Tested with Magisk 25.2, newer version should work, but you MUST follow the SafetyNet fix guide in the next post if you want Play Store certification.
Suggested GAPPS for LineageOS: Mind The Gaps (here, make sure to download the ones for your android version 10, 11 or 12).
XDA DevDB Information
LineageOS 17.1 & 18.1 & 19.1, ROM for the Xiaomi Poco X3 NFC
Contributors
Build by @gardiol
Device tree sources: device tree
Kernel sources: kernel
Vendor sources: vendor
Additional notes
SafetyNet does not pass by default, you need to follow the steps on post n.3 below. This is due to Google issues and LOS rules.
ROM OS Version: Android 10 & 11 & 11
ROM Kernel: Linux 4.x
Version Information
Status: Official and Unofficial.
Created 2020-12-13
Last Updated 2022-08-24
Changelog
From May 2022:
LineageOS 19.1 is official for Surya!
TO BE CLEAR: there are OFFICIAL releases weekly, those (and the according changelog) is NOT listed here, go to official LOS download page! This list if only for test builds at this point.
20 December 2021 (17.1)
Last 17.1 build ever for Surya
December security patches
19 September 2021 (17.1)
September security patches.
06 September 2021 (18.1)
New debloated kernel
Fixed screen recorder rate limiter
Fixed DriveDroid (and more usb gadget stuff)
Added proximy check to prevent screen wakeup option
August patches
Fixed minor denials (battery improvement)
31 July 2021 (18.1)
Fixed lots of denials
Greatly improved battery life
more minor fixes.
20 July 2021 (both 17.1 and 18.1)
July patches
For 18.1: mi_thermald added back
For 18.1: dynamic 30-120Hz fixed
13 July 2021 (18.1)
All new trees!
FORMAT data is MANDATORY
19 June 2021 (17.1)
Upstream sync
June patches
17 June 2021 (18.1)
fixed haptic issues
Fixed Netflix error 5.10
Fixed idle drain
Fixed NFC denial
Upstream sync
07 June 2021 (18.1)
Fix aptX
Fix boot from MIUI to LOS not working
07 June 2021 (18.1)
Fix netflix
Fic video recording length
Fix GBoard rounded corners
05 June 2021 (18.1)
First release of 18.1 build!
11 May 2021 (17.1)
LOS upstream sync with May patches
18 April 2021
LOS upstream sync with April patches
Dpmd crash resolved
️LOS call recorder enabled
️Removed all permissive domains
09 April 2021
Upstream sources sync
28/29 March 2021
Fixed video recording bug
Fixed audio crackling (finally!)
Removed all "parts", added doze and refresh rate specific settings
Getting trees ready for official
(note: UnofficlalBuild and Experimental builds are from 28 March, MicroG from 29th)
13 March 2021
Two builds are available...
Unofficial, the same old build, but with March security patches.
Experimental, featuring a full vendor partition, but still SELinux permissive, but a ton of improvements including fixed video recording length, 4K video recording and playback and more minor issues.
Pick your choice!
27 February 2021
Really fixed yellow tint once for all
Enabled VoIP transition
Updated proprietary blobs
Haptic improvements
Various minor optimizations
LOS upstream sync
19 February 2021
Improved Wifi
Improved audio
LOS upstream sync
06 February 2021
Improved brightness levels
Finished reworking tree
February LOS upstream sync
Latest security patches
24 Jannuray 2021
Fixed "Fast Charging" string, except for original charger!!! (Fast charging IS working, just does not says it's fast in lockscreen).
Added 30Hz and 50Hz display frequency in display options
Cleaned up audio routes
19 Jannuary 2021
Reverted a prop which was interferring with whatsapp videos.
18 Jannuary 2021
Fixed fingerprints
Rewritten init_surya.cpp
Removed more useless stuff
Activated correctly second SIM card
Added a few translations
Improved brighness
Improved Wifi networks
Fixed tethering+bluetooth
05 Jannuary 2021
WiFi Display fixed, finally!
Resolved bug with speakerphone and reboot
05 Jannuary 2021
WiFi Display not fixed
Product partition enlarged
Device Tree reworked for proper contribution recognition
AOD disabled. Once fixed will be available again.
01 Jannuary 2021
DT2W Fixed.
29 December 2020
New device tree is up.
Brightness works again
DT2W not working
AOD not working
FM Radio fixed (again)
29 December 2020
Final fix for low volume recording.
WiFI Display still not fixed (please send logs!!!)
Device tree cleaned up a lot
add Higher Aspect Ratio
statusbar : avoid display parameters on Notch
SELinux is showing Enforcing in Trust
28 December 2020
Added audio fixes for low volume.
Added full WiFi Display support (to be confirmed)
26 December 2020
New parittion size.
Bluetooth now reporting working properly.
24 December 2020
Tentative SELinux enforcing.
22 December 2020
Added FM radio support, FM radio working.
SELinux still permissive
20 December 2020
Reworked vendor mixing camera blobs from A10 branch and telephony from A11 branch.
Camera is reported working.
SIM card is reported working.
VoLTE and WoWiFi reported working.
FM Radio NOT working.
19 December 2020
New beta build for camera fix.
Let me know if it works!
18 December 2020
SIM card works
missing camera
selinux permissive, will try to fix in later build
Passing SafetyNet and Google Play Certification
SafetyNet and Play Store certification
(guide updated 24 aug 2022, for Magisk 25.2)
LineageOS, by charter, does not alter any safety ptotection set by Google. In our case, having an unlocked bootloader, safetynet will always fail by Google decision. Now, passing safety net is required for banking apps and even some games. Also, it is required for "play store certification", which will prevent you from even searching for some apps (like Netflix).
Blame Google for all this.
--ALL STEPS ARE MANDATORY, NONE CAN BE SKIPPED UNLESS EXPLICITY OPTIONAL--
Install Magisk
Download latest stable magisk apk from Magisk website (https://github.com/topjohnwu/Magisk). Rename it as .zip and flash it from recovery. Some recoveries, like TWRP, will flash the apk directly, others will require the rename.
Boot LOS and install the apk file.
Hide Magisk apps and Enable Zygisk & blocklist
Open Magisk App, go to settings and hide the magisk app. Give it a name you will remember.
After magisk app has been hidden, go back to settings and enable Zygisk (beta).
Now apply the blocklist and select all the apps you like NOT to detect Magisk. This must include Google Play Services and Google Play Store.
Install SafetyNet fix module
kDrag0n developed a fix that can be flashed via Magisk. You must download the module (https://github.com/kdrag0n/safetynet-fix/releases), select at least version 2.2.1, and install it from inside Magisk app.
Setup Fingerprint
Download latest Props module for Magisk (https://forum.xda-developers.com/t/...t-prop-edits-and-more-v6-1-2.3789228/page-274) and install it within Magisk. Reboot your phone.
Now, after reboot, open a terminal (use "adb shell" from pc, or install termux from play store) and type:
su (grant root access!)
props (a text based menu will popup)
Now select "1" (edit fingerprint), type "f" (pick fingerprint) select "22" (poco) then select any one poco x3 model. Which one really doesn't matter, but make sure to choose the right Android version.
Confirm and reboot phone.
Clear caches for Google stuff
Now, open settings - apps and clear data&cache for Google Play Store and Google Play Services.
One last reboot!
Don't want root?
If you dont want root... Just disable it from within Magisk!
OPTIONAL Additional stuff
Magisk from 24.1 removed the built-in modules repository. If you like it back, you can install Fox's Magisk Module Manager app (https://github.com/Fox2Code/FoxMagiskModuleManager).
LineageOS on SafetyNet (https://www.lineageos.org/Safetynet)
Kdrag0n on SafetyNet (https://github.com/kdrag0n/safetynet-fix)
SafetyNetFix Magisk Module (https://github.com/kdrag0n/safetynet-fix/releases)
Magisk download (https://github.com/topjohnwu/Magisk)
Props Module for Magisk (https://forum.xda-developers.com/t/...t-prop-edits-and-more-v6-1-2.3789228/page-274)
fox's Magisk Module Manager (https://github.com/Fox2Code/FoxMagiskModuleManager)
Wow. Thanks.
Thank you very much
Thanks for the ROM! Is this built with the official kernel release? Or are you using the one built by @xyyx ? Also I'm assuming SELinux is enforcing?
I'll flash it later this week most likely
Selinux is enforcing yes. The kernel is the default kernel. This is mandatory since i want to apply for official when stable enough.
gardiol said:
Selinux is enforcing yes. The kernel is the default kernel. This is mandatory since i want to apply for official when stable enough.
Click to expand...
Click to collapse
why your kernel Is not forked from Xiaomi Git?
I am new to most of this, yes it should. My bad, i cloned it then added the files to my repo. I will fix it later.
what's the required firmware version for this ROM?
Firmware is 12.0.4 (surya) as i wrote, untested on karna so i don't know for that one.
Does this includes Gapps? I prefer not to have them.
Thanks for this release.
Of course it does NOT contain GAPPS! This is LineageOS. I suggest to flash OpenGAPPS pico.
With Spanish language and pico opengapps, it stays on shutting down just starting.
Please try to flash only the ROM (no GAPPS) then boot and try.
gardiol said:
Please try to flash only the ROM (no GAPPS) then boot and try.
Click to expand...
Click to collapse
Yes, but when it comes to choosing a language it restarts.
Can you get a log cat from adb or it restart too soon?
What if you select english?
gardiol said:
Can you get a log cat from adb or it restart too soon?
What if you select english?
Click to expand...
Click to collapse
good afternoon again.
I wanted to try flash again, but now it does not start, it stays in bootlop with recovery
You probably must format data (not wipe, but format), this is usually why it bootloops to recovery...
gardiol said:
You probably must format data (not wipe, but format), this is usually why it bootloops to recovery...
Click to expand...
Click to collapse
The same thing happens to me flash only rom.
My network flashes, I don't know why it says I don't have a sim. but if I have, I want to log in but I can't because I am in the office with little time
I'm going to update my Samsung S21 from Android 11 One UI 3.1 to Android 12 One UI 4, can someone confirm that the standard firmware update procedure (patched ap + home_csc + bl + cp) will work?
Thank you
For the love of all that is holy, do not go to android 12 yet, it has broken so many of my apps and workfliws, including virtual environments. Garbage update.
Thanks.
Last Samsung's build broke compatibility with magisk 23, so I need to wait for its update too...
If dt fstab contains error, fallback to default fstab by yujincheng08 · Pull Request #5139 · topjohnwu/Magisk
See https://cs.android.com/android/platform/superproject/+/master:system/core/init/first_stage_mount.cpp;drc=master;l=155 From the source of FirstStageMount, dt fstab can fail gracefully and if any...
github.com
just to report, update done following this step:
- uninstallaed riru module and USNF (riru version)
- unhide magisk app
- update magisk app (23 > 24.1)
- update magisk (direct install) and reboot
- hide magisk app
- patched latest AP and flashed with BL/CP/HOME_CSC
- enabled zygisk and added previuos magisk hide apps to denylist
- installed USNF (2.2.1 zygisk version) and reboot