Hey. At the start I will say right away that my English is not perfect and my syntax may be incorrect. I have a problem with my V10. A few days ago I uploaded Android 7 in Turkish. The phone worked well for one day. The next day I watched a video on YouTube, after which the phone hanged. I pulled out the battery, put it back on, but the phone died. The computer in the COM ports appeared as a Qualcomm HS-USB QDLoader 9008. I used this unbrick guide on the phone, after many attempts to re-download the software (except the v30 with the upgrade option, because trying v10 or v20 always appeared error At 14%, I could not do the refubrish option because it was an error that the file could not be loaded using this option.) Glad that I fixed my phone I started configuring the phone, after which it hanged and restarted. Then I decided to do a hard reset. After that, the phone does not rise again. I read somewhere that the eMMc was corrupted and only the motherboard was broken, so my question is: do you have an unlocked bootloader and software for the 32GB H960ATR version can I give you a phone for a warranty? In such a situation, are they able to check what version of the software I have and I have unlocked bootloader? Is there any option to lock in this case bootloader having copies of bootloader files before unlocking it?
i was going to flash the turkish kdz.................
after this i will think
i feel sorry for you
I buy a phone from Ebay, i flashed the phone with wrong rom's in Smart Phone Flash Tool. then i flashed the phone i check the Bootloader off. so i don't flash the preloader.
I searched around and i found close to the phone and it was MT6735M without error in Smart Phone Flash Tool. But the phone still does not boot up, without success.
I asked on this forum i another topics, he help me to get preloader.bin out of my phone, now i have the preloader.bin.
What the problem i can't found the right rom right now.
The name is: (GSM UNLOCKED 4G LTE 6.29" Waterdrop Screen Smart Phone Android 9 Fingerprint ID) from Ebay
i get confused:
Before i flash the Phone it says (MT6595)
I got booted it op in mode: and it says (MT6735)
The buyer says (MT6575)
WwR MTK says: CPU type: (MT6752)
Can some one help me with the right rom? i hope you also not get confused as i am. Tell me if you need more info about the topic.
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, similar to the previous threads for
OP3, OP3T, OP5, OP5T, OP6, OP6T, OP7, OP7PRO, regular OP7T, T-Mobile OP7T and regular OP7TPRO here are the EDL packages (also known as MSM tools or unbrick tools) that can revive a bricked OnePlus 7T Pro 5G McLaren bought from T-Mobile.
They can also be used to rollback your phone to a previous release of OOS if for some reason you want to go back to an older firmware
It will only work with 5G T-Mobile variant HD1925
You can download the following versions:
ANDROID 10:
10.0.13 HD61CB
10.0.16 HD61CB
10.0.19 HD61CB
10.0.27 HD61CB
10.0.34 HD61CB
10.0.35 HD61CB
10.0.36 HD61CB
10.0.39 HD61CB
10.0.40 HD61CB
10.0.41 HD61CB
10.0.42 HD61CB
Mirror for first and last MSMs: https://onepluscommunityserver.com/
ANDROID 11:
11.0.1.5 HD61CB
Mirror for first and last MSMs: https://onepluscommunityserver.com/
Instructions:
Launch MsmDownloadTool V4.0.exe.
Specific to 10.0.27 and up
On the login prompt select "Other" in the dropdown menu and click on Next.
Wait a few seconds until main window shows up.
Click on Target button and select T-MO if it hasn't been automatically.
Power your device off.
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Plug your device to your computer using stock OnePlus cable.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds.
Enjoy your brand new device.
FAQ:
Will this fix OTAs I couldn't receive after unlocking bootloader?
Yes. Mind it will however wipe all of your internal storage and relock bootloader automatically (but you shouldn't have to reapply for an unlock token if your bootloader was unlocked previously).
Does this work on Mac or on Linux?
Unfortunately no, tool is Windows only. You should need at least Windows 7.
Why is my antivirus freaking out when unzipping the archive or running the tool?
In an effort to protect reverse engineering from being done (and by extension prevent conversion process like it was done on 6T and 7Pro), OnePlus now use VM Protect V3 in their MSM tools. As this tries to detect debug environment, this is seen as malicious behaviour by some antivirus.
My device isn't detected when I click on "Enum" button
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsof...updateid=8ee52ba0-bdef-4009-88cf-335a678dd67a ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked above.
MSM tool is stuck on "Sahara communication failed"
Unplug your phone, get in fastboot mode, turn off phone, wait 15 secondes and get back in Qualcomm EDL mode. You can also try using a USB 2.0 port instead of a 3.0 one.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.
How can I fix "SMT config not found" error?
Please refer to https://forum.xda-developers.com/showpost.php?p=83448961&postcount=61, all credits to @Shadow12347 for finding it out.
Credits:
@omariscal1019 for getting 10.0.27 version from OnePlus
@a63548 for getting 10.0.19 version from OnePlus
An anonymous user for unblocking situation with OnePlus CS (they kept sending package meant for 7T T-Mobile)
@jhofseth for decryption of 10.0.19 tool
@xian1243 and @omariscal1019 for testing 10.0.13 version, @twinnfamous for testing 10.0.13 and 10.0.16 versions, @ntzrmtthihu777 for testing 10.0.13 , 10.0.16 and 10.0.19 versions, @DanDroidOS for testing 10.0.19 version, and @me2151 for testing 11.0.1.5 version.
@Titokhan for being a friend and providing inspiration in writing
@headsh0t95 for being a friend and suggesting me to request an access to upload files on AndroidFileHost now one year ago for my previous threads
@AndroidFileHost for the hosting
OnePlus for the device and OS
Related: [HD1925] [OP7TPROTMO] reserve.img dumps OTA fixer from @ntzrmtthihu777 for folks that want to get OTAs if they unlock their phone after using MSM tool
Woooooo!!! Let's hope it's the real deal. Downloading now so I can root in a bit
It's real and was tested extensively. We also used them to complete our reserve.img collection.
Nice work! I refuse to go any further than bootloader unlocking until I had a tested MSM recovery. Can't tell you how many times those saved my butt with previous 1+ phones.
I apologise in advance, but I do not see a link for the msm tool to flash zips in this post ? Can someone please link a copy of the correct msm tool so we can download it, please and thank you if there is a adb command that I'd have to run instead of msm tool please help me by listing a small guide of how to do it thanks
Excuse my lack of knowledge on the subject. Is this what we've been waiting for? I'm guessing no or very little experimenting was being done because nobody wanted to destroy their phone. But if I understanding correctly this will work like the one for the 6T only difference is we can't flash a global firmware (for the moment) if you royally f**k up this will save you. With this tool it should make experimenting with the device a lot less of an issue?
Justingaribay7 said:
I apologise in advance, but I do not see a link for the msm tool to flash zips in this post ? Can someone please link a copy of the correct msm tool so we can download it, please and thank you if there is a adb command that I'd have to run instead of msm tool please help me by listing a small guide of how to do it thanks
Click to expand...
Click to collapse
There's a button that has them all listed. There's three versions.
Joe199799 said:
Excuse my lack of knowledge on the subject. Is this what we've been waiting for? I'm guessing no or very little experimenting was being done because nobody wanted to destroy their phone. But if I understanding correctly this will work like the one for the 6T only difference is we can't flash a global firmware (for the moment) if you royally f**k up this will save you. With this tool it should make experimenting with the device a lot less of an issue?
Click to expand...
Click to collapse
More or less, but there simply is no global firmware for us to
convert to for this device (they could create one, I suppose).
This tool will fix just about any sort of brick we may encounter
during normal experimentation.
ntzrmtthihu777 said:
There's a button that has them all listed. There's three versions.
More or less, but there simply is no global firmware for us to
convert to for this device (they could create one, I suppose).
This tool will fix just about any sort of brick we may encounter
during normal experimentation.
Click to expand...
Click to collapse
I guessing there's a strong possibility of a global conversion hindering 5G?
I'm just glad there's a tool available to people that want to modify their phones and don't end up with a 900$ paperweight in the event something goes wrong.
Damn, I can't believe I didn't even think about unzipping the whole file lol figured it was just the phone firmware on those links , because there was only software versions listed haha thanks for your help guys! figured it out, download whatever version you want to flash, unzip file accordingly, all the proper files you'll need will be in the extracted folder install directions above, thanks again!!!
You sir are a lifesaver! I was having too many issues with my phone after some of the tweaks, and was stuck on the .16 software version. Now I'm updated to .19 and ready to break the phone again!
One plus 7T 5G Mclaren pro T-Mobile
OMG, I just used this tool and it worked. I can't believe it. Thank you so much. I thought my device was toasted.
Any chance of updating the post to include the latest update 10.0.25?
adit07 said:
Any chance of updating the post to include the latest update 10.0.25?
Click to expand...
Click to collapse
Might happen, might not.
If it doesn't happen this however won't be an issue as you can rollback anyway by using.
Mind that I don't make these tools so don't have any control on how they could be updated
What if you connect your phone and it does not even show up as the bulk driver in device manager. I have literally bricked it to the point that only edl mode shows up. Can anyone please show me the light?
djohnson1618 said:
What if you connect your phone and it does not even show up as the bulk driver in device manager. I have literally bricked it to the point that only edl mode shows up. Can anyone please show me the light?
Click to expand...
Click to collapse
While booting up the phone hold I believe volume up and plug it in while doing that it should just remain on a black screen after that open msmtool and see if it's connected if it is then do what you would normally do for msmtool. It took me a couple of tries to get it to recognize with this phone compared to my 6T
Lost
Does anyone know what it should say once I press Enum
djohnson1618 said:
Does anyone know what it should say once I press Enum
Click to expand...
Click to collapse
Read the OP carefully.
So My One Plus One 7t Pro Mclaren edition (TMO) is bricked beyond belief. It only reboots into Fastboot mode. From CMD when ADB devices command is typed in it says no devices found. When I look in device manager when connected it says Android Bootloader Interface it does not show any of the drivers to update. I tried using MSM. My phone does not make a connection. Can anyone offer any assistance to help me get this phone back and working? Or am I just stuck with an expensive paperweight.
djohnson1618 said:
So My One Plus One 7t Pro Mclaren edition (TMO) is bricked beyond belief. It only reboots into Fastboot mode. From CMD when ADB devices command is typed in it says no devices found. When I look in device manager when connected it says Android Bootloader Interface it does not show any of the drivers to update. I tried using MSM. My phone does not make a connection. Can anyone offer any assistance to help me get this phone back and working? Or am I just stuck with an expensive paperweight.
Click to expand...
Click to collapse
As said in the OP, you need to turn your device off and enter in Qualcomm EDL mode.
Maintain power button until your device screen goes off, wait 20 seconds, maintain volume up and down keys, plug your device to your computer using OnePlus original cable and use MSM tool.
Ok , lemme cover my bases here... OnePlus 10t, Android 12, T Mobile. .
I have usb debugging on, oem unlock on, and device appears in ADB ... Newest platform tools, updated drivers.... When I run 'adb reboot bootloader', the phone shuts off, then I see 'fastboot mode' for like half a second , and it goes off and boots up normal. I can enter fastbootd .. but regular fastboot causes instant reboot! Can ANYONE help me with what I need to do? You can't unlock bootloader in fastbootd... So I need help figuring out how to make it NOT kick out of fastboot when I enter the command. (Usb 2.0)
OPPO locked the bootloader permanently. They do this on the find series as well.. basically bootloader mode is disabled.
I haven't heard about this before, is it a T-Mobile only thing? That seems really bad for oppo to do that...
Hurt Copain said:
OPPO locked the bootloader permanently. They do this on the find series as well.. basically bootloader mode is disabled.
Click to expand...
Click to collapse
ok , so how then can i either re activate this mode or root this device? because that is a deal breaker for me! I wont keep the ONLY model of this phone that has Fastboot disabled, and therefore is unable to be rooted! I have about 8 days left to package back up and send back to Tmobile for refund! Now i can fully reach EDL mode, so if there is a software that can let me flash the EU Unlocked FW , then please direct me. I saw some success written about here with the new MSM, but it requires some authentication. I am 100% fully committed to any method, no matter how complex, to rectify this travesty! The ONLY reason i jumped from Samsung to OnePlus years ago was because of how Developer friendly they were... Easy unlock of bootloader... yadda yadda! Now the curse of Beatbreaker has struck again, and the impossible has happened in that SAMSUNG bootloaders are now easily unlockable via purchased token... and Oneplus has become part of an asshat dictatorship.
Please advise if there is ANYONE here who can either help me with this situation, or can direct me to instructions/software that can flip this situation around. I mean, the fact that Fastbootd reports my device in "Fastboot" when running 'Fastboot devices' ... AND that even if only for a glimpse of a second i can see FASTBOOT MODE, before it kicks me out and reboots, tells me that there must be some glitch, exploit, or workaround that can re-enable it! I only state this because some phone companies (carriers) like Metropcs were pre-installing FW that made Download mode disabled for quite a few devices, but thru some low level (edl) actions, we were able to reverse that and load a global fw to the phones, restoring all functions!
ok long posts.... ANYONE... I am up for ALL suggestions, because i can fully brick this phone and return it , but my window closes in 7 days!
beatbreakee said:
ok , so how then can i either re activate this mode or root this device? because that is a deal breaker for me! I wont keep the ONLY model of this phone that has Fastboot disabled, and therefore is unable to be rooted! I have about 8 days left to package back up and send back to Tmobile for refund! Now i can fully reach EDL mode, so if there is a software that can let me flash the EU Unlocked FW , then please direct me. I saw some success written about here with the new MSM, but it requires some authentication. I am 100% fully committed to any method, no matter how complex, to rectify this travesty! The ONLY reason i jumped from Samsung to OnePlus years ago was because of how Developer friendly they were... Easy unlock of bootloader... yadda yadda! Now the curse of Beatbreaker has struck again, and the impossible has happened in that SAMSUNG bootloaders are now easily unlockable via purchased token... and Oneplus has become part of an asshat dictatorship.
Please advise if there is ANYONE here who can either help me with this situation, or can direct me to instructions/software that can flip this situation around. I mean, the fact that Fastbootd reports my device in "Fastboot" when running 'Fastboot devices' ... AND that even if only for a glimpse of a second i can see FASTBOOT MODE, before it kicks me out and reboots, tells me that there must be some glitch, exploit, or workaround that can re-enable it! I only state this because some phone companies (carriers) like Metropcs were pre-installing FW that made Download mode disabled for quite a few devices, but thru some low level (edl) actions, we were able to reverse that and load a global fw to the phones, restoring all functions!
ok long posts.... ANYONE... I am up for ALL suggestions, because i can fully brick this phone and return it , but my window closes in 7 days!
Click to expand...
Click to collapse
Dang! This is a messy situation for yah! I contacted support for an MSM tool and they said I have to send it in for them to flash it.
I think trying to have them flash some other variant would take you past your 7 day window and they may not do it anyways.
I would say least send an email to OnePlus support and ask if they would flash to other variant otherwise you will be returning the phone. You should get a response soon. Otherwise I'd lean towards returning it... Sadly.
Then buy straight from oneplus if you still want a 10t. They may have a good blackfriday deal on this phone as well.
maamdroid said:
Dang! This is a messy situation for yah! I contacted support for an MSM tool and they said I have to send it in for them to flash it.
I think trying to have them flash some other variant would take you past your 7 day window and they may not do it anyways.
I would say least send an email to OnePlus support and ask if they would flash to other variant otherwise you will be returning the phone. You should get a response soon. Otherwise I'd lean towards returning it... Sadly.
Then buy straight from oneplus if you still want a 10t. They may have a good blackfriday deal on this phone as well.
Click to expand...
Click to collapse
thank you ... i was waiting for the response from someone who had been in contact with them. I will mail them right away.
Hello Guys
I want to link my topic of last month for my motorola X40 as I can see the moto x40 / edge 40 pro has a own XDA forum now.
Link of the topic is to be found here:
https://forum.xda-developers.com/t/i-screwed-up-moto-x40-bricked-any-edl-mode-available.4567913/
Short story: I bricked my moto X40 last month by flashing the wrong firmware (edge 30 pro) with result my phone is semi bricked. (+ relocked the bootloader).
My phone is detected now as a edge 30 pro in firmware.
It's still booting and I can even play games on it but the touchscreen is not working anymore, touch itself works but the calibration is completely wrong, it's touching a complete different point on the screen compared where I put my finger on. So touch is unusable
I can control my screen phone with a bluetooth mouse or gamepad controller. (i'm using it for now as a switch emulator or I play some games from the play store).
I haven't managed to unlock the bootloader anymore, the option is there in developer menu but when I try to enable it, the developer menu just crashes (stopped working error).
My theory behind this is you can only unlock the bootloader once.
So this topic is for anyone has encountering the same issue as me, who knows there will be any solution in the future.
I think only EDL mode can unlock the bootloader again or flash the phone back to original firmware.
But we don't know yet how to get into EDL mode for this phone yet.
Did you try using blankflash? as it works from 9008 port and probably flashes the boot image.
MASBD said:
Did you try using blankflash? as it works from 9008 port and probably flashes the boot image.
Click to expand...
Click to collapse
Yes I think I saw a post somewhere couple of weeks ago there was a blankflash file for this phone but not yet a working method to flash or use it. I could be wrong
The main problem is I can't get it to 9008 (EDL) port otherwise I could have flashed it back easily also with RSDlite or Qfil tool.
EDL mode (9008 port) is required to flash with blankflash(or any other method) if you can't unlock the primary bootloader anymore from the firmware side.
If i'm not wrong I don't think anyone has found out yet how bypass the snapdragon 8 gen2 primary bootloader to access the secondary bootloader (edl mode).
Shorting some test-points on the motherboard circuit could work, only we don't know yet which ones exactly
1 guy has tried this out I found on the russian forum:
Motorola Moto X40 / Motorola Edge 40 Pro - Обсуждение - 4PDA
Motorola Moto X40 / Motorola Edge 40 Pro - Обсуждение, Смартфон, 6,7"
4pda.to
He tried to short the circuit with test points on the motherboard and succeeded to bypass the primary bootloader and tried to get into EDL mode on (port 9008). But I think regardless of that he still wasn't able to flash it (used bad google translation from russian to english. Even he tricked the phone into EDL mode at some point he got stuck in the flashing process, my guess is there are some additional security added to this SOC to avoid this.
Edit: Maybe this is some useful info for other people reading this
Based on my previous research
Normal fastboot mode = primary bootloader (non EDL mode)
EDL mode (port 9008) = tied to secondary bootloader
The secondary bootloader is always present on a snapdragon SOC, but ofcourse due security reasons it's a bit of a secret how to access it. Guess time will tell if someone find it out how to get into EDL mode on this phone (moto X40 or edge 40pro which shares both same SOC).
the same problem here
Solved.
Solved.
forum.xda-developers.com