I've finally been able to get my device from mediatek loop and can get into download mode but after flashing with odin everything but HOME_CSC i got from samfw i am getting stuck at logo and when i manage to get into recovery it says it cant mount /.system (invalid argument)
Can you help me how to proceed? Can't seem to find anything except download firmware and flash using odin, which doesnt work
Also from recovery log:
Code:
libc: Unable to get property "ro.boottime.init.mount.cache" to "2": error code 0xb, try count 3
sandorex said:
I've finally been able to get my device from mediatek loop and can get into download mode but after flashing with odin everything but HOME_CSC i got from samfw i am getting stuck at logo and when i manage to get into recovery it says it cant mount /.system (invalid argument)
Can you help me how to proceed? Can't seem to find anything except download firmware and flash using odin, which doesnt work
Also from recovery log:
Code:
libc: Unable to get property "ro.boottime.init.mount.cache" to "2": error code 0xb, try count 3
Click to expand...
Click to collapse
please show your download mode screen.
Use CSC rather than Home CSC
SHOW RECOVERY AS WELL
Use .pit file and make re-partition
I am sorry for late reply i was at work
I did use CSC and not HOME CSC
Ill try using the pit file
Here's recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's the download screen
Same after using pit file from the CSC archive
Managed to fix it!
Ill post below how later when i write it down sequentially
sandorex said:
Managed to fix it!
Ill post below how later when i write it down sequentially
Click to expand...
Click to collapse
Hi! I'm going through the same issue. Could you share your fix, please?
Due to work i never completed the guide sadly, here's my notes hope you can understand it
All credit goes to @ozmage
DO NOTE THAT MY DEVICE IS SM-T220, you can use my GPT Table only if you own same device
To get the GPT table on your own use mtkclient mtk printgpt but it may not work if your partitions are totally destroyed
Spoiler: GPT Table
GPT Table:
-------------
efs: Offset 0x0000000000400000, Length 0x0000000000800000, Flags 0x00000000, UUID f57ad330-39c2-4488-b09b-00cb43c9ccd4, Type EFI_BASIC_DATA
sec_efs: Offset 0x0000000000c00000, Length 0x0000000000800000, Flags 0x00000000, UUID fe686d97-3544-4a41-21be-167e25b61b6f, Type EFI_BASIC_DATA
steady: Offset 0x0000000001400000, Length 0x0000000000400000, Flags 0x00000000, UUID 1cb143a8-b1a8-4b57-51b2-945c5119e8fe, Type EFI_BASIC_DATA
nvram: Offset 0x0000000001800000, Length 0x0000000004000000, Flags 0x00000000, UUID 3b9e343b-cdc8-4d7f-a69f-b6812e50ab62, Type EFI_BASIC_DATA
spmfw: Offset 0x0000000005800000, Length 0x0000000000100000, Flags 0x00000000, UUID 5f6a2c79-6617-4b85-02ac-c2975a14d2d7, Type EFI_BASIC_DATA
scp1: Offset 0x0000000005900000, Length 0x0000000000100000, Flags 0x00000000, UUID 4ae2050b-5db5-4ff7-d3aa-5730534be63d, Type EFI_BASIC_DATA
sspm_1: Offset 0x0000000005a00000, Length 0x0000000000100000, Flags 0x00000000, UUID 1f9b0939-e16b-4bc9-bca5-dc2ee969d801, Type EFI_BASIC_DATA
grd_fw: Offset 0x0000000005b00000, Length 0x0000000000200000, Flags 0x00000000, UUID d722c721-0dee-4cb8-838a-2c63cd1393c7, Type EFI_BASIC_DATA
tee1: Offset 0x0000000005d00000, Length 0x0000000000200000, Flags 0x00000000, UUID e02179a8-ceb5-48a9-3188-4f1c9c5a8695, Type EFI_BASIC_DATA
tzar: Offset 0x0000000005f00000, Length 0x0000000000400000, Flags 0x00000000, UUID 84b09a81-fad2-41ac-0e89-407c24975e74, Type EFI_BASIC_DATA
gz1: Offset 0x0000000006300000, Length 0x0000000001000000, Flags 0x00000000, UUID e8f0a5ef-8d1b-42ea-2a9c-835cd77de363, Type EFI_BASIC_DATA
lk: Offset 0x0000000007300000, Length 0x0000000000200000, Flags 0x00000000, UUID d5f0e175-a6e1-4db7-c094-f82ad032950b, Type EFI_BASIC_DATA
dtbo: Offset 0x0000000007500000, Length 0x0000000000800000, Flags 0x00000000, UUID 1d9056e1-e139-4fca-0b8c-b75fd74d81c6, Type EFI_BASIC_DATA
vbmeta: Offset 0x0000000007d00000, Length 0x0000000000010000, Flags 0x00000000, UUID 7792210b-b6a8-45d5-91ad-3361ed14c608, Type EFI_BASIC_DATA
btd: Offset 0x0000000007d10000, Length 0x00000000002f0000, Flags 0x00000000, UUID 138a6db9-1032-451d-e991-0fa38ff94fbb, Type EFI_BASIC_DATA
protect1: Offset 0x0000000008000000, Length 0x0000000000800000, Flags 0x00000000, UUID 756d934c-50e3-4c91-46af-02d824169ca7, Type EFI_BASIC_DATA
protect2: Offset 0x0000000008800000, Length 0x0000000000800000, Flags 0x00000000, UUID a3f3c267-5521-42dd-24a7-3bdec20c7c6f, Type EFI_BASIC_DATA
seccfg: Offset 0x0000000009000000, Length 0x0000000000800000, Flags 0x00000000, UUID 8c68cd2a-ccc9-4c5d-578b-34ae9b2dd481, Type EFI_BASIC_DATA
bota: Offset 0x0000000009800000, Length 0x0000000002d00000, Flags 0x00000000, UUID 6a5cebf8-54a7-4b89-1d8d-c5eb140b095b, Type EFI_BASIC_DATA
boot_para: Offset 0x000000000c500000, Length 0x0000000000100000, Flags 0x00000000, UUID a0d65bf8-e8de-4107-3494-1d318c843d37, Type EFI_BASIC_DATA
para: Offset 0x000000000c600000, Length 0x0000000000080000, Flags 0x00000000, UUID 46f0c0bb-f227-4eb6-2fb8-66408e13e36d, Type EFI_BASIC_DATA
misc: Offset 0x000000000c680000, Length 0x0000000000080000, Flags 0x00000000, UUID fbc2c131-6392-4217-1eb5-548a6edb03d0, Type EFI_BASIC_DATA
expdb: Offset 0x000000000c700000, Length 0x0000000001400000, Flags 0x00000000, UUID e195a981-e285-4734-2580-ec323e9589d9, Type EFI_BASIC_DATA
frp: Offset 0x000000000db00000, Length 0x0000000000100000, Flags 0x00000000, UUID e29052f8-5d3a-4e97-b5ad-5f312ce6610a, Type EFI_BASIC_DATA
nvcfg: Offset 0x000000000dc00000, Length 0x0000000002000000, Flags 0x00000000, UUID 9c3cabd7-a35d-4b45-578c-b80775426b35, Type EFI_BASIC_DATA
nvdata: Offset 0x000000000fc00000, Length 0x0000000004000000, Flags 0x00000000, UUID e7099731-95a6-45a6-e5a1-1b6aba032cf1, Type EFI_BASIC_DATA
metadata: Offset 0x0000000013c00000, Length 0x0000000002000000, Flags 0x00000000, UUID 8273e1ab-846f-4468-99b9-ee2ea8e50a16, Type EFI_BASIC_DATA
keyrefuge: Offset 0x0000000015c00000, Length 0x0000000001000000, Flags 0x00000000, UUID d26472f1-9ebc-421d-14ba-311296457c90, Type EFI_BASIC_DATA
keydata: Offset 0x0000000016c00000, Length 0x0000000001000000, Flags 0x00000000, UUID b72ccbe9-2055-46f4-67a1-4a069c201738, Type EFI_BASIC_DATA
md_udc: Offset 0x0000000017c00000, Length 0x000000000169a000, Flags 0x00000000, UUID 9c1520f3-c2c5-4b89-4282-fe4c61208a9e, Type EFI_BASIC_DATA
persistent: Offset 0x000000001929a000, Length 0x0000000000080000, Flags 0x00000000, UUID 902d5f3f-434a-4de7-8889-321e88c9b8aa, Type EFI_BASIC_DATA
proinfo: Offset 0x000000001931a000, Length 0x0000000000300000, Flags 0x00000000, UUID bece74c8-d8e2-4863-fe9b-5b0b66bb920f, Type EFI_BASIC_DATA
md1img: Offset 0x000000001961a000, Length 0x0000000006400000, Flags 0x00000000, UUID ff1342cf-b7be-44d5-5ea2-a435addd2702, Type EFI_BASIC_DATA
logo: Offset 0x000000001fa1a000, Length 0x0000000000800000, Flags 0x00000000, UUID a4da8f1b-fe07-433b-cb95-84a5f23e477b, Type EFI_BASIC_DATA
param: Offset 0x000000002021a000, Length 0x0000000000400000, Flags 0x00000000, UUID c2635e15-61aa-454e-409c-ebe1bdf19b9b, Type EFI_BASIC_DATA
up_param: Offset 0x000000002061a000, Length 0x0000000000400000, Flags 0x00000000, UUID 4d2d1290-36a3-4f5d-b4af-319f8ab6dcd8, Type EFI_BASIC_DATA
persist: Offset 0x0000000020a1a000, Length 0x0000000003000000, Flags 0x00000000, UUID fdce12f0-a7eb-40f7-5083-960972e6cb57, Type EFI_BASIC_DATA
boot: Offset 0x0000000023a1a000, Length 0x0000000002000000, Flags 0x00000000, UUID 0fbbafa2-4aa9-4490-8389-5329328505fd, Type EFI_BASIC_DATA
recovery: Offset 0x0000000025a1a000, Length 0x0000000002500000, Flags 0x00000000, UUID a76e4b2f-31cb-40ba-6a82-c0cb0b73c856, Type EFI_BASIC_DATA
vbmeta_system: Offset 0x0000000027f1a000, Length 0x0000000000010000, Flags 0x00000000, UUID f54ac030-7004-4d02-8194-bbf982036807, Type EFI_BASIC_DATA
vbmeta_vendor: Offset 0x0000000027f2a000, Length 0x0000000000010000, Flags 0x00000000, UUID c4c310e2-4a7e-77d3-1848-61e2d8bb5e86, Type EFI_BASIC_DATA
efuse: Offset 0x0000000027f3a000, Length 0x0000000000080000, Flags 0x00000000, UUID 3734710f-0f13-1ab9-4c73-12a08ec50837, Type EFI_BASIC_DATA
rsv1: Offset 0x0000000027fba000, Length 0x0000000000046000, Flags 0x00000000, UUID 85a5b02f-3773-18b3-4910-718cde95107e, Type EFI_BASIC_DATA
sec1: Offset 0x0000000028000000, Length 0x0000000000800000, Flags 0x00000000, UUID 6fce83a6-5273-4748-4511-c205ebb4b8ad, Type EFI_BASIC_DATA
super: Offset 0x0000000028800000, Length 0x0000000067000000, Flags 0x00000000, UUID 3645e6a3-a7e3-19b2-4149-172c10190eef, Type EFI_BASIC_DATA
prism: Offset 0x000000008f800000, Length 0x0000000020c00000, Flags 0x00000000, UUID f60b92b4-0e2f-91b6-4afb-2d0b643bab4b, Type EFI_BASIC_DATA
optics: Offset 0x00000000b0400000, Length 0x0000000001400000, Flags 0x00000000, UUID d05cedfe-20b7-68b3-f259-4fe25317f2fc, Type EFI_BASIC_DATA
cache: Offset 0x00000000b1800000, Length 0x000000000c800000, Flags 0x00000000, UUID 54060b67-fa74-5c82-1661-44821e54dced, Type EFI_BASIC_DATA
omr: Offset 0x00000000be000000, Length 0x0000000001800000, Flags 0x00000000, UUID c0a128fb-59d1-0a9e-e8f0-ea3d36a9d658, Type EFI_BASIC_DATA
spu: Offset 0x00000000bf800000, Length 0x0000000003200000, Flags 0x00000000, UUID f5f5a7f8-f8ec-3ba1-c9cb-4e2a7cbc7d07, Type EFI_BASIC_DATA
userdata: Offset 0x00000000c2a00000, Length 0x00000006851fbe00, Flags 0x00000000, UUID 736d618a-5b79-530b-ac9d-895339690613, Type EFI_BASIC_DATA
Total disk size:0x0000000747c00000, sectors:0x0000000003a3e000
Good luck!
sandorex said:
Due to work i never completed the guide sadly, here's my notes hope you can understand it
All credit goes to @ozmage
DO NOTE THAT MY DEVICE IS SM-T220, you can use my GPT Table only if you own same device
To get the GPT table on your own use mtkclient mtk printgpt but it may not work if your partitions are totally destroyed
Spoiler: GPT Table
GPT Table:
-------------
efs: Offset 0x0000000000400000, Length 0x0000000000800000, Flags 0x00000000, UUID f57ad330-39c2-4488-b09b-00cb43c9ccd4, Type EFI_BASIC_DATA
sec_efs: Offset 0x0000000000c00000, Length 0x0000000000800000, Flags 0x00000000, UUID fe686d97-3544-4a41-21be-167e25b61b6f, Type EFI_BASIC_DATA
steady: Offset 0x0000000001400000, Length 0x0000000000400000, Flags 0x00000000, UUID 1cb143a8-b1a8-4b57-51b2-945c5119e8fe, Type EFI_BASIC_DATA
nvram: Offset 0x0000000001800000, Length 0x0000000004000000, Flags 0x00000000, UUID 3b9e343b-cdc8-4d7f-a69f-b6812e50ab62, Type EFI_BASIC_DATA
spmfw: Offset 0x0000000005800000, Length 0x0000000000100000, Flags 0x00000000, UUID 5f6a2c79-6617-4b85-02ac-c2975a14d2d7, Type EFI_BASIC_DATA
scp1: Offset 0x0000000005900000, Length 0x0000000000100000, Flags 0x00000000, UUID 4ae2050b-5db5-4ff7-d3aa-5730534be63d, Type EFI_BASIC_DATA
sspm_1: Offset 0x0000000005a00000, Length 0x0000000000100000, Flags 0x00000000, UUID 1f9b0939-e16b-4bc9-bca5-dc2ee969d801, Type EFI_BASIC_DATA
grd_fw: Offset 0x0000000005b00000, Length 0x0000000000200000, Flags 0x00000000, UUID d722c721-0dee-4cb8-838a-2c63cd1393c7, Type EFI_BASIC_DATA
tee1: Offset 0x0000000005d00000, Length 0x0000000000200000, Flags 0x00000000, UUID e02179a8-ceb5-48a9-3188-4f1c9c5a8695, Type EFI_BASIC_DATA
tzar: Offset 0x0000000005f00000, Length 0x0000000000400000, Flags 0x00000000, UUID 84b09a81-fad2-41ac-0e89-407c24975e74, Type EFI_BASIC_DATA
gz1: Offset 0x0000000006300000, Length 0x0000000001000000, Flags 0x00000000, UUID e8f0a5ef-8d1b-42ea-2a9c-835cd77de363, Type EFI_BASIC_DATA
lk: Offset 0x0000000007300000, Length 0x0000000000200000, Flags 0x00000000, UUID d5f0e175-a6e1-4db7-c094-f82ad032950b, Type EFI_BASIC_DATA
dtbo: Offset 0x0000000007500000, Length 0x0000000000800000, Flags 0x00000000, UUID 1d9056e1-e139-4fca-0b8c-b75fd74d81c6, Type EFI_BASIC_DATA
vbmeta: Offset 0x0000000007d00000, Length 0x0000000000010000, Flags 0x00000000, UUID 7792210b-b6a8-45d5-91ad-3361ed14c608, Type EFI_BASIC_DATA
btd: Offset 0x0000000007d10000, Length 0x00000000002f0000, Flags 0x00000000, UUID 138a6db9-1032-451d-e991-0fa38ff94fbb, Type EFI_BASIC_DATA
protect1: Offset 0x0000000008000000, Length 0x0000000000800000, Flags 0x00000000, UUID 756d934c-50e3-4c91-46af-02d824169ca7, Type EFI_BASIC_DATA
protect2: Offset 0x0000000008800000, Length 0x0000000000800000, Flags 0x00000000, UUID a3f3c267-5521-42dd-24a7-3bdec20c7c6f, Type EFI_BASIC_DATA
seccfg: Offset 0x0000000009000000, Length 0x0000000000800000, Flags 0x00000000, UUID 8c68cd2a-ccc9-4c5d-578b-34ae9b2dd481, Type EFI_BASIC_DATA
bota: Offset 0x0000000009800000, Length 0x0000000002d00000, Flags 0x00000000, UUID 6a5cebf8-54a7-4b89-1d8d-c5eb140b095b, Type EFI_BASIC_DATA
boot_para: Offset 0x000000000c500000, Length 0x0000000000100000, Flags 0x00000000, UUID a0d65bf8-e8de-4107-3494-1d318c843d37, Type EFI_BASIC_DATA
para: Offset 0x000000000c600000, Length 0x0000000000080000, Flags 0x00000000, UUID 46f0c0bb-f227-4eb6-2fb8-66408e13e36d, Type EFI_BASIC_DATA
misc: Offset 0x000000000c680000, Length 0x0000000000080000, Flags 0x00000000, UUID fbc2c131-6392-4217-1eb5-548a6edb03d0, Type EFI_BASIC_DATA
expdb: Offset 0x000000000c700000, Length 0x0000000001400000, Flags 0x00000000, UUID e195a981-e285-4734-2580-ec323e9589d9, Type EFI_BASIC_DATA
frp: Offset 0x000000000db00000, Length 0x0000000000100000, Flags 0x00000000, UUID e29052f8-5d3a-4e97-b5ad-5f312ce6610a, Type EFI_BASIC_DATA
nvcfg: Offset 0x000000000dc00000, Length 0x0000000002000000, Flags 0x00000000, UUID 9c3cabd7-a35d-4b45-578c-b80775426b35, Type EFI_BASIC_DATA
nvdata: Offset 0x000000000fc00000, Length 0x0000000004000000, Flags 0x00000000, UUID e7099731-95a6-45a6-e5a1-1b6aba032cf1, Type EFI_BASIC_DATA
metadata: Offset 0x0000000013c00000, Length 0x0000000002000000, Flags 0x00000000, UUID 8273e1ab-846f-4468-99b9-ee2ea8e50a16, Type EFI_BASIC_DATA
keyrefuge: Offset 0x0000000015c00000, Length 0x0000000001000000, Flags 0x00000000, UUID d26472f1-9ebc-421d-14ba-311296457c90, Type EFI_BASIC_DATA
keydata: Offset 0x0000000016c00000, Length 0x0000000001000000, Flags 0x00000000, UUID b72ccbe9-2055-46f4-67a1-4a069c201738, Type EFI_BASIC_DATA
md_udc: Offset 0x0000000017c00000, Length 0x000000000169a000, Flags 0x00000000, UUID 9c1520f3-c2c5-4b89-4282-fe4c61208a9e, Type EFI_BASIC_DATA
persistent: Offset 0x000000001929a000, Length 0x0000000000080000, Flags 0x00000000, UUID 902d5f3f-434a-4de7-8889-321e88c9b8aa, Type EFI_BASIC_DATA
proinfo: Offset 0x000000001931a000, Length 0x0000000000300000, Flags 0x00000000, UUID bece74c8-d8e2-4863-fe9b-5b0b66bb920f, Type EFI_BASIC_DATA
md1img: Offset 0x000000001961a000, Length 0x0000000006400000, Flags 0x00000000, UUID ff1342cf-b7be-44d5-5ea2-a435addd2702, Type EFI_BASIC_DATA
logo: Offset 0x000000001fa1a000, Length 0x0000000000800000, Flags 0x00000000, UUID a4da8f1b-fe07-433b-cb95-84a5f23e477b, Type EFI_BASIC_DATA
param: Offset 0x000000002021a000, Length 0x0000000000400000, Flags 0x00000000, UUID c2635e15-61aa-454e-409c-ebe1bdf19b9b, Type EFI_BASIC_DATA
up_param: Offset 0x000000002061a000, Length 0x0000000000400000, Flags 0x00000000, UUID 4d2d1290-36a3-4f5d-b4af-319f8ab6dcd8, Type EFI_BASIC_DATA
persist: Offset 0x0000000020a1a000, Length 0x0000000003000000, Flags 0x00000000, UUID fdce12f0-a7eb-40f7-5083-960972e6cb57, Type EFI_BASIC_DATA
boot: Offset 0x0000000023a1a000, Length 0x0000000002000000, Flags 0x00000000, UUID 0fbbafa2-4aa9-4490-8389-5329328505fd, Type EFI_BASIC_DATA
recovery: Offset 0x0000000025a1a000, Length 0x0000000002500000, Flags 0x00000000, UUID a76e4b2f-31cb-40ba-6a82-c0cb0b73c856, Type EFI_BASIC_DATA
vbmeta_system: Offset 0x0000000027f1a000, Length 0x0000000000010000, Flags 0x00000000, UUID f54ac030-7004-4d02-8194-bbf982036807, Type EFI_BASIC_DATA
vbmeta_vendor: Offset 0x0000000027f2a000, Length 0x0000000000010000, Flags 0x00000000, UUID c4c310e2-4a7e-77d3-1848-61e2d8bb5e86, Type EFI_BASIC_DATA
efuse: Offset 0x0000000027f3a000, Length 0x0000000000080000, Flags 0x00000000, UUID 3734710f-0f13-1ab9-4c73-12a08ec50837, Type EFI_BASIC_DATA
rsv1: Offset 0x0000000027fba000, Length 0x0000000000046000, Flags 0x00000000, UUID 85a5b02f-3773-18b3-4910-718cde95107e, Type EFI_BASIC_DATA
sec1: Offset 0x0000000028000000, Length 0x0000000000800000, Flags 0x00000000, UUID 6fce83a6-5273-4748-4511-c205ebb4b8ad, Type EFI_BASIC_DATA
super: Offset 0x0000000028800000, Length 0x0000000067000000, Flags 0x00000000, UUID 3645e6a3-a7e3-19b2-4149-172c10190eef, Type EFI_BASIC_DATA
prism: Offset 0x000000008f800000, Length 0x0000000020c00000, Flags 0x00000000, UUID f60b92b4-0e2f-91b6-4afb-2d0b643bab4b, Type EFI_BASIC_DATA
optics: Offset 0x00000000b0400000, Length 0x0000000001400000, Flags 0x00000000, UUID d05cedfe-20b7-68b3-f259-4fe25317f2fc, Type EFI_BASIC_DATA
cache: Offset 0x00000000b1800000, Length 0x000000000c800000, Flags 0x00000000, UUID 54060b67-fa74-5c82-1661-44821e54dced, Type EFI_BASIC_DATA
omr: Offset 0x00000000be000000, Length 0x0000000001800000, Flags 0x00000000, UUID c0a128fb-59d1-0a9e-e8f0-ea3d36a9d658, Type EFI_BASIC_DATA
spu: Offset 0x00000000bf800000, Length 0x0000000003200000, Flags 0x00000000, UUID f5f5a7f8-f8ec-3ba1-c9cb-4e2a7cbc7d07, Type EFI_BASIC_DATA
userdata: Offset 0x00000000c2a00000, Length 0x00000006851fbe00, Flags 0x00000000, UUID 736d618a-5b79-530b-ac9d-895339690613, Type EFI_BASIC_DATA
Total disk size:0x0000000747c00000, sectors:0x0000000003a3e000
Good luck!
Click to expand...
Click to collapse
Credits To You For Compiling The Guide This Might Help s Lot Of People we were the first ones to brick-brick hard even more than normal hardbrick and we help each other in every step
sandorex said:
Due to work i never completed the guide sadly, here's my notes hope you can understand it
All credit goes to @ozmage
DO NOTE THAT MY DEVICE IS SM-T220, you can use my GPT Table only if you own same device
To get the GPT table on your own use mtkclient mtk printgpt but it may not work if your partitions are totally destroyed
Spoiler: GPT Table
GPT Table:
-------------
efs: Offset 0x0000000000400000, Length 0x0000000000800000, Flags 0x00000000, UUID f57ad330-39c2-4488-b09b-00cb43c9ccd4, Type EFI_BASIC_DATA
sec_efs: Offset 0x0000000000c00000, Length 0x0000000000800000, Flags 0x00000000, UUID fe686d97-3544-4a41-21be-167e25b61b6f, Type EFI_BASIC_DATA
steady: Offset 0x0000000001400000, Length 0x0000000000400000, Flags 0x00000000, UUID 1cb143a8-b1a8-4b57-51b2-945c5119e8fe, Type EFI_BASIC_DATA
nvram: Offset 0x0000000001800000, Length 0x0000000004000000, Flags 0x00000000, UUID 3b9e343b-cdc8-4d7f-a69f-b6812e50ab62, Type EFI_BASIC_DATA
spmfw: Offset 0x0000000005800000, Length 0x0000000000100000, Flags 0x00000000, UUID 5f6a2c79-6617-4b85-02ac-c2975a14d2d7, Type EFI_BASIC_DATA
scp1: Offset 0x0000000005900000, Length 0x0000000000100000, Flags 0x00000000, UUID 4ae2050b-5db5-4ff7-d3aa-5730534be63d, Type EFI_BASIC_DATA
sspm_1: Offset 0x0000000005a00000, Length 0x0000000000100000, Flags 0x00000000, UUID 1f9b0939-e16b-4bc9-bca5-dc2ee969d801, Type EFI_BASIC_DATA
grd_fw: Offset 0x0000000005b00000, Length 0x0000000000200000, Flags 0x00000000, UUID d722c721-0dee-4cb8-838a-2c63cd1393c7, Type EFI_BASIC_DATA
tee1: Offset 0x0000000005d00000, Length 0x0000000000200000, Flags 0x00000000, UUID e02179a8-ceb5-48a9-3188-4f1c9c5a8695, Type EFI_BASIC_DATA
tzar: Offset 0x0000000005f00000, Length 0x0000000000400000, Flags 0x00000000, UUID 84b09a81-fad2-41ac-0e89-407c24975e74, Type EFI_BASIC_DATA
gz1: Offset 0x0000000006300000, Length 0x0000000001000000, Flags 0x00000000, UUID e8f0a5ef-8d1b-42ea-2a9c-835cd77de363, Type EFI_BASIC_DATA
lk: Offset 0x0000000007300000, Length 0x0000000000200000, Flags 0x00000000, UUID d5f0e175-a6e1-4db7-c094-f82ad032950b, Type EFI_BASIC_DATA
dtbo: Offset 0x0000000007500000, Length 0x0000000000800000, Flags 0x00000000, UUID 1d9056e1-e139-4fca-0b8c-b75fd74d81c6, Type EFI_BASIC_DATA
vbmeta: Offset 0x0000000007d00000, Length 0x0000000000010000, Flags 0x00000000, UUID 7792210b-b6a8-45d5-91ad-3361ed14c608, Type EFI_BASIC_DATA
btd: Offset 0x0000000007d10000, Length 0x00000000002f0000, Flags 0x00000000, UUID 138a6db9-1032-451d-e991-0fa38ff94fbb, Type EFI_BASIC_DATA
protect1: Offset 0x0000000008000000, Length 0x0000000000800000, Flags 0x00000000, UUID 756d934c-50e3-4c91-46af-02d824169ca7, Type EFI_BASIC_DATA
protect2: Offset 0x0000000008800000, Length 0x0000000000800000, Flags 0x00000000, UUID a3f3c267-5521-42dd-24a7-3bdec20c7c6f, Type EFI_BASIC_DATA
seccfg: Offset 0x0000000009000000, Length 0x0000000000800000, Flags 0x00000000, UUID 8c68cd2a-ccc9-4c5d-578b-34ae9b2dd481, Type EFI_BASIC_DATA
bota: Offset 0x0000000009800000, Length 0x0000000002d00000, Flags 0x00000000, UUID 6a5cebf8-54a7-4b89-1d8d-c5eb140b095b, Type EFI_BASIC_DATA
boot_para: Offset 0x000000000c500000, Length 0x0000000000100000, Flags 0x00000000, UUID a0d65bf8-e8de-4107-3494-1d318c843d37, Type EFI_BASIC_DATA
para: Offset 0x000000000c600000, Length 0x0000000000080000, Flags 0x00000000, UUID 46f0c0bb-f227-4eb6-2fb8-66408e13e36d, Type EFI_BASIC_DATA
misc: Offset 0x000000000c680000, Length 0x0000000000080000, Flags 0x00000000, UUID fbc2c131-6392-4217-1eb5-548a6edb03d0, Type EFI_BASIC_DATA
expdb: Offset 0x000000000c700000, Length 0x0000000001400000, Flags 0x00000000, UUID e195a981-e285-4734-2580-ec323e9589d9, Type EFI_BASIC_DATA
frp: Offset 0x000000000db00000, Length 0x0000000000100000, Flags 0x00000000, UUID e29052f8-5d3a-4e97-b5ad-5f312ce6610a, Type EFI_BASIC_DATA
nvcfg: Offset 0x000000000dc00000, Length 0x0000000002000000, Flags 0x00000000, UUID 9c3cabd7-a35d-4b45-578c-b80775426b35, Type EFI_BASIC_DATA
nvdata: Offset 0x000000000fc00000, Length 0x0000000004000000, Flags 0x00000000, UUID e7099731-95a6-45a6-e5a1-1b6aba032cf1, Type EFI_BASIC_DATA
metadata: Offset 0x0000000013c00000, Length 0x0000000002000000, Flags 0x00000000, UUID 8273e1ab-846f-4468-99b9-ee2ea8e50a16, Type EFI_BASIC_DATA
keyrefuge: Offset 0x0000000015c00000, Length 0x0000000001000000, Flags 0x00000000, UUID d26472f1-9ebc-421d-14ba-311296457c90, Type EFI_BASIC_DATA
keydata: Offset 0x0000000016c00000, Length 0x0000000001000000, Flags 0x00000000, UUID b72ccbe9-2055-46f4-67a1-4a069c201738, Type EFI_BASIC_DATA
md_udc: Offset 0x0000000017c00000, Length 0x000000000169a000, Flags 0x00000000, UUID 9c1520f3-c2c5-4b89-4282-fe4c61208a9e, Type EFI_BASIC_DATA
persistent: Offset 0x000000001929a000, Length 0x0000000000080000, Flags 0x00000000, UUID 902d5f3f-434a-4de7-8889-321e88c9b8aa, Type EFI_BASIC_DATA
proinfo: Offset 0x000000001931a000, Length 0x0000000000300000, Flags 0x00000000, UUID bece74c8-d8e2-4863-fe9b-5b0b66bb920f, Type EFI_BASIC_DATA
md1img: Offset 0x000000001961a000, Length 0x0000000006400000, Flags 0x00000000, UUID ff1342cf-b7be-44d5-5ea2-a435addd2702, Type EFI_BASIC_DATA
logo: Offset 0x000000001fa1a000, Length 0x0000000000800000, Flags 0x00000000, UUID a4da8f1b-fe07-433b-cb95-84a5f23e477b, Type EFI_BASIC_DATA
param: Offset 0x000000002021a000, Length 0x0000000000400000, Flags 0x00000000, UUID c2635e15-61aa-454e-409c-ebe1bdf19b9b, Type EFI_BASIC_DATA
up_param: Offset 0x000000002061a000, Length 0x0000000000400000, Flags 0x00000000, UUID 4d2d1290-36a3-4f5d-b4af-319f8ab6dcd8, Type EFI_BASIC_DATA
persist: Offset 0x0000000020a1a000, Length 0x0000000003000000, Flags 0x00000000, UUID fdce12f0-a7eb-40f7-5083-960972e6cb57, Type EFI_BASIC_DATA
boot: Offset 0x0000000023a1a000, Length 0x0000000002000000, Flags 0x00000000, UUID 0fbbafa2-4aa9-4490-8389-5329328505fd, Type EFI_BASIC_DATA
recovery: Offset 0x0000000025a1a000, Length 0x0000000002500000, Flags 0x00000000, UUID a76e4b2f-31cb-40ba-6a82-c0cb0b73c856, Type EFI_BASIC_DATA
vbmeta_system: Offset 0x0000000027f1a000, Length 0x0000000000010000, Flags 0x00000000, UUID f54ac030-7004-4d02-8194-bbf982036807, Type EFI_BASIC_DATA
vbmeta_vendor: Offset 0x0000000027f2a000, Length 0x0000000000010000, Flags 0x00000000, UUID c4c310e2-4a7e-77d3-1848-61e2d8bb5e86, Type EFI_BASIC_DATA
efuse: Offset 0x0000000027f3a000, Length 0x0000000000080000, Flags 0x00000000, UUID 3734710f-0f13-1ab9-4c73-12a08ec50837, Type EFI_BASIC_DATA
rsv1: Offset 0x0000000027fba000, Length 0x0000000000046000, Flags 0x00000000, UUID 85a5b02f-3773-18b3-4910-718cde95107e, Type EFI_BASIC_DATA
sec1: Offset 0x0000000028000000, Length 0x0000000000800000, Flags 0x00000000, UUID 6fce83a6-5273-4748-4511-c205ebb4b8ad, Type EFI_BASIC_DATA
super: Offset 0x0000000028800000, Length 0x0000000067000000, Flags 0x00000000, UUID 3645e6a3-a7e3-19b2-4149-172c10190eef, Type EFI_BASIC_DATA
prism: Offset 0x000000008f800000, Length 0x0000000020c00000, Flags 0x00000000, UUID f60b92b4-0e2f-91b6-4afb-2d0b643bab4b, Type EFI_BASIC_DATA
optics: Offset 0x00000000b0400000, Length 0x0000000001400000, Flags 0x00000000, UUID d05cedfe-20b7-68b3-f259-4fe25317f2fc, Type EFI_BASIC_DATA
cache: Offset 0x00000000b1800000, Length 0x000000000c800000, Flags 0x00000000, UUID 54060b67-fa74-5c82-1661-44821e54dced, Type EFI_BASIC_DATA
omr: Offset 0x00000000be000000, Length 0x0000000001800000, Flags 0x00000000, UUID c0a128fb-59d1-0a9e-e8f0-ea3d36a9d658, Type EFI_BASIC_DATA
spu: Offset 0x00000000bf800000, Length 0x0000000003200000, Flags 0x00000000, UUID f5f5a7f8-f8ec-3ba1-c9cb-4e2a7cbc7d07, Type EFI_BASIC_DATA
userdata: Offset 0x00000000c2a00000, Length 0x00000006851fbe00, Flags 0x00000000, UUID 736d618a-5b79-530b-ac9d-895339690613, Type EFI_BASIC_DATA
Total disk size:0x0000000747c00000, sectors:0x0000000003a3e000
Good luck!
Click to expand...
Click to collapse
Thank you! I flashed the official firmware's AP (T220XXU1BVK1) and the issue was gone. After that I tried flashing the custom AP (Elixir OS 13) again. When it's flashing [super] I get a message in download mode that says:
SW REV CHECK FAIL : Fused 1 > Binary 0Then, Odin gives me the Passed! message and I get a nice bootloop. :,(
When I go to download mode, it shows KG Status: Broken and OEM Lock: OFF (U)
Would this have to do with the fact that my official firmware is still in A12 and I'm trying to use an A13 GSI (ElixirOS)?
If that's the case, should I wait for my region to get the A13 update or can I just flash an A13 firmware from a different region?
Arexiga said:
SW REV CHECK FAIL : Fused 1 > Binary 0
Click to expand...
Click to collapse
I also have this but it works fine, just boot into recovery by holding vol up and factory reset
can I just flash an A13 firmware from a different region?
Click to expand...
Click to collapse
Yes mine is originally EUY but im using EUX as it has A13
Yup. I did it multiple times, the factory reset is successful but I still get the bootloop.
Also, I noticed I keep getting the "failed to load bitmap installing text for locale en-us" error when booting into recovery.
Arexiga said:
Yup. I did it multiple times, the factory reset is successful but I still get the bootloop.
Also, I noticed I keep getting the "failed to load bitmap installing text for locale en-us" error when booting into recovery.
Click to expand...
Click to collapse
Any other errors in recovery?
Also did you follow a guide for GSI making
sandorex said:
I also have this but it works fine, just boot into recovery by holding vol up and factory reset
Yes mine is originally EUY but im using EUX as it has A13
Click to expand...
Click to collapse
Nice! How do I go about flashing EUX on an MXO device? Any special procedure/step(s)? Or just flashing AP, BL and CSC with Odin as normal?
sandorex said:
Any other errors in recovery?
Also did you follow a guide for GSI making
Click to expand...
Click to collapse
Yes, I used your automated script. Here's what I got:
Arexiga said:
Yes, I used your automated script. Here's what I got:
View attachment 5811941View attachment 5811943
Click to expand...
Click to collapse
I guess try flashing the A13 firmware i used CL7 and see then do GSI
Also are you flashing properly without HOME_CSC?
sandorex said:
I guess try flashing the A13 firmware i used CL7 and see then do GSI
Also are you flashing properly without HOME_CSC?
Click to expand...
Click to collapse
Gotcha, I'll try that. Do I just flash it as a regular firmware?
Yes, I've only used the regular CSC file.
Arexiga said:
Gotcha, I'll try that. Do I just flash it as a regular firmware?
Yes, I've only used the regular CSC file.
Click to expand...
Click to collapse
Yes, BL, AP, CSC and usually factory reset is required
I went ahead and flashed the EUX A13 Firmware you suggested and It's working now! Thanks a lot for your help!
Arexiga said:
I went ahead and flashed the EUX A13 Firmware you suggested and It's working now! Thanks a lot for your help!
Click to expand...
Click to collapse
Your welcome
Btw did you need to flash the disabled_vbmeta from the guide ?
Related
Hey there, please someone run a tcpdump while the OTA update on the mini and send me the log. Because now my phone is still sending, but maybe i'm able to work on further till the phone arrives
Thanks
Bin4ry
X10 mini PRO comes out of the store with the latest firmware 1.1.А.0.8.
and can't be udated Over-the-air :-(
But X10 mini (may be) comes with 1.0.А.1.036
Any idea how to force update Over-the-air, if firmware already latest?
May be tcpdump of update over PcCompanion can help?
yep i know, but i we can crossflash X10 mini firmware to X10 mini pro (keyboard will not work). But now i'm searching for a x10 mini user who is making a tcpdump until i get the device to do it on my own
The faster someone helps the faster you get root
Regards
EDIT:
No way to force the update :/
SE is always using ssl-sha1 crypting in their communication with fota servers. We already tryed to guess the right chat but no luck. For now we can only dump the mainpath to fota.package and then we know it for all firmwares
PC-Comp. won't help, cause i'm working on dmclient. I think i have found the key to root a few hours ago. Now we need fota and firmware dump to roll back to the rom where fota updates from
Ок.
I already found the way to revert my firmware to previous 1.0.A.1.36 firmware.
1.1.А.0.8 -> 1.0.A.1.36 = completed
But now it's UK firmware and loose my Russian Warranty
But OTA update not available im my region :'(
OTA over WLAN is always available, because it only knows firmware version.
Hmm if not it weird.
So you are now on UK firmware?
Try to go into OTA Settings -> Networks -> WLAN Only
Then search again, if you got it:
tcpdump -D
-> you will get interfaces
tcpdump -w dump.log -I *INTERFACENUMBER*
Thanks
Bin4ry
NO!
I think it looks at SIM card, operator or IMEI.
OTA update not available :-(
Yes it now UK firmware – Google Voice works perfectly (it can't works in my country).
Phone Software version:
1235-3408_1.0.A.1.36
GENERIC - user
File System Version:
WORLD-1-8_1.0.A.1.36
S1 Boot version
1229-3593 R8A026
ETS Software version
1234-7269_1S_18
Customization version
1237-0392_R6A
Memory card
1236-3496_R9A
Content version
PA12
Type Number
AAD-3880069-BV
Click to expand...
Click to collapse
Way to revert:
Use debranding procedure.
And quick copy 2 files between SEUS download firmware from SE and load it to phone.
UPD: But SEUS says now that Update available!
UPD2: OTA can't find network without SIM installed!
hmmm, okay thanks for trying. Then we have to find somebody who is willing to do and for whom OTA is available :/
But many thanks for trying
Regards
Bin4ry
How to do that
Hi, I guess I may do what you ask for. I've tried udpated the phone using OTA. It told me I already have the latest software installed, so it OTA should be available by my guess.
What is the exact way to get the dump. I have no idea where tu put the commands in. I've left Win Mobile a few days ago (after 6 years) and I'm very new to Android
Regards,
Radek
Yes, update phone using OTA is clearly possible, here is a part of the message from a member of esto forum : "I upgraded yesterday to 1.1.A.08 in India on OTA and got two fresh apps installed, Roller Coaster & Backup/Restore." can see here (last message on the page) : http://www.esato.com/board/viewtopic.php?topic=194074&start=705
If you got this message there is not OTA for you :/
Some people here claimed that there is OTA, thats because it requested someone of them to capture it with tcpdump.
Regards
Bin4ry
Darkbidule said:
Yes, update phone using OTA is clearly possible, here is a part of the message from a member of esto forum : "I upgraded yesterday to 1.1.A.08 in India on OTA and got two fresh apps installed, Roller Coaster & Backup/Restore." can see here (last message on the page) : http://www.esato.com/board/viewtopic.php?topic=194074&start=705
Click to expand...
Click to collapse
If we can get the information from the service menu from this chaps phone we can hopefully recreate the link
I created a new thread to request this informations .... Maybe this time the right users answer
Regards
Bin4ry
MarylandCookie said:
If we can get the information from the service menu from this chaps phone we can hopefully recreate the link
Click to expand...
Click to collapse
This user got update:
Phone Software Version:
1235-3408_1.1.A.0.8
GEBERIC - user
File System Version:
WORLD-1-8_1.1.A.0.8
German User!
Regards
Bin4ry
May be this will help: device booting log
<5>[ 0.000000] Linux version 2.6.29 ([email protected]) (gcc version 4.2.1)
#1 PREEMPT Sun Apr 25 11:26:30 2010
<4>[ 0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
<4>[ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: QCT MSM7x27 SURF
<6>[ 0.000000] Partition (from atag) system -- Offset:160 Size:670
<6>[ 0.000000] Partition (from atag) cache -- Offset:7d0 Size:190
<6>[ 0.000000] Partition (from atag) appslog -- Offset:ffe Size:2
<6>[ 0.000000] Partition (from atag) userdata -- Offset:960 Size:69e
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[ 0.000000] On node 0 totalpages: 55296
<7>[ 0.000000] free_area_init_node: node 0, pgdat 804de1c8, node_mem_map 805fb000
<7>[ 0.000000] Normal zone: 432 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 54864 pages, LIFO batch:15
<6>[ 0.000000] allocating 524288 bytes at 80800000 (a00000 physical) for kernel ebi1 pmem arena
<6>[ 0.000000] allocating 15159296 bytes at 80eac000 (10ac000 physical) for mdp pmem arena
<6>[ 0.000000] allocating 8880128 bytes at 81d21000 (1f21000 physical) for adsp pmem arena
<6>[ 0.000000] allocating 16777216 bytes at 82599000 (2799000 physical) for gpu1 pmem arena
<6>[ 0.000000] allocating 1048576 bytes at 83599000 (3799000 physical) for fb
<6>[ 0.000000] allocating 2097152 bytes at 83700000 (3900000 physical) for KGSL
<6>[ 0.000000] L210 cache controller enabled
<4>[ 0.000000]
<4>[ 0.000000] [KDUMP] Successfully reserved Crashk Memory
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 54864
<5>[ 0.000000] Kernel command line: mem=216M androidboot.hardware=delta
msm_hsusb.pid=0x3137 console=ttyMSM2 serialno=xxxxx console=ttyMSM0 startup=0x00000001
<3>[ 0.000000] Unknown boot option `androidboot.hardware=delta': ignoring
<6>[ 0.000000] USB serial number: xxxxx
<7>[ 0.000000] startup_reason_setup: 0x1
<4>[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
<4>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.000280] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000920] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.016915] Memory: 216MB = 216MB total
<5>[ 0.016948] Memory: 168704KB available (4628K code, 1296K data, 140K init)
<6>[ 0.017291] Calibrating delay loop... 599.65 BogoMIPS (lpj=2998272)
<4>[ 0.230310] Mount-cache hash table entries: 512
<6>[ 0.230871] CPU: Testing write buffer coherency: ok
<6>[ 0.233743] net_namespace: 296 bytes
<6>[ 0.234665] NET: Registered protocol family 16
<6>[ 0.236738] socinfo_init: v3, id=43, ver=0.0, raw_id=0, raw_ver=0, hw_plat=0
<6>[ 0.236760] acpu_clock_init()
<6>[ 0.236925] L val: PLL0: 50, PLL1: 12, PLL2: 62
<6>[ 0.237055] ACPU running at 600000 KHz
<6>[ 0.237071] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
<6>[ 0.237098] 0 19200 -1 1 19200 1 30720 -1 -1 -1 1 4 3
<6>[ 0.237123] 1 120000 0 8 60000 2 61440 -1 -1 -1 5 4 3
<6>[ 0.237150] 2 122880 1 2 61440 2 61440 1 -1 -1 5 4 3
<6>[ 0.237175] 3 200000 2 6 66667 3 61440 1 2 -1 5 4 6
<6>[ 0.237200] 4 245760 1 1 122880 2 61440 1 2 3 7 -1 6
<6>[ 0.237225] 5 320000 0 3 160000 2 160000 1 2 3 7 -1 6
<6>[ 0.237250] 6 400000 2 3 133333 3 160000 5 4 3 7 -1 8
<6>[ 0.237276] 7 480000 0 2 160000 3 160000 5 4 6 -1 -1 8
<6>[ 0.237301] 8 600000 2 2 200000 3 200000 7 -1 6 -1 -1 -1
<6>[ 0.237320] Shared PLL control available.
<6>[ 0.237333] 5 scaling frequencies supported.
<7>[ 0.274038] msm_mddi_hitachi_display_device_init
<7>[ 0.274426] msm_mddi_samsung_display_device_init
<7>[ 0.274635] msm_mddi_toshiba_display_device_init
<6>[ 0.275236] console [oops-1] enabled
<4>[ 0.291785] bio: create slab <bio-0> at 0
<6>[ 0.293121] msm_i2c_probe
<6>[ 0.293233] msm_i2c_probe: clk_ctl 315, 400000 Hz
<6>[ 0.296706] Bluetooth: Core ver 2.15
<6>[ 0.297058] NET: Registered protocol family 31
<6>[ 0.297075] Bluetooth: HCI device and connection manager initialized
<6>[ 0.297096] Bluetooth: HCI socket layer initialized
<6>[ 0.299913] NET: Registered protocol family 2
<6>[ 0.300103] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<7>[ 0.300196] Switched to high resolution mode on CPU 0
<6>[ 0.300596] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.300911] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 0.301081] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 0.301100] TCP reno registered
<6>[ 0.301290] NET: Registered protocol family 1
<6>[ 0.301893] checking if image is initramfs... it is
<6>[ 0.593413] Freeing initrd memory: 684K
<6>[ 0.595695] smd probe
<6>[ 0.595718] smd_core_init()
<6>[ 0.595801] smd_core_init() done
<6>[ 0.596068] smd_alloc_channel: cid 0 fifo found; size = 8192
<6>[ 0.596091] smd_alloc_channel() 'DS' cid=0
<6>[ 0.597035] smd_alloc_channel: cid 1 fifo found; size = 8192
<6>[ 0.597060] smd_alloc_channel() 'DIAG' cid=1
<6>[ 0.597440] smd_alloc_channel: cid 2 fifo found; size = 8192
<6>[ 0.597465] smd_alloc_channel() 'RPCCALL' cid=2
<6>[ 0.597868] smd_alloc_channel: cid 7 fifo found; size = 32768
<6>[ 0.597891] smd_alloc_channel() 'DATA1' cid=7
<6>[ 0.598321] smd_alloc_channel: cid 8 fifo found; size = 8192
<6>[ 0.598343] smd_alloc_channel() 'DATA2' cid=8
<6>[ 0.598766] smd_alloc_channel: cid 9 fifo found; size = 8192
<6>[ 0.598788] smd_alloc_channel() 'DATA3' cid=9
<6>[ 0.599191] smd_alloc_channel: cid 10 fifo found; size = 8192
<6>[ 0.599215] smd_alloc_channel() 'DATA4' cid=10
<6>[ 0.599628] smd_alloc_channel: cid 11 fifo found; size = 32768
<6>[ 0.599651] smd_alloc_channel() 'DATA5' cid=11
<6>[ 0.600021] smd_alloc_channel: cid 12 fifo found; size = 32768
<6>[ 0.600045] smd_alloc_channel() 'DATA6' cid=12
<6>[ 0.600485] smd_alloc_channel: cid 13 fifo found; size = 32768
<6>[ 0.600506] smd_alloc_channel() 'DATA7' cid=13
<6>[ 0.600940] smd_alloc_channel: cid 17 fifo found; size = 8192
<6>[ 0.600963] smd_alloc_channel() 'DATA11' cid=17
<3>[ 0.601380] smd_alloc_channel: cid 38 does not exist
<6>[ 0.601401] smd_alloc_channel: cid 39 fifo found; size = 8192
<6>[ 0.601421] smd_alloc_channel() 'DAL00' cid=39
<6>[ 0.601813] smd_alloc_channel: cid 40 fifo found; size = 8192
<6>[ 0.601835] smd_alloc_channel() 'DATA5_CNTL' cid=40
<6>[ 0.602243] smd_alloc_channel: cid 41 fifo found; size = 8192
<6>[ 0.602265] smd_alloc_channel() 'DATA6_CNTL' cid=41
<6>[ 0.602646] smd_alloc_channel: cid 42 fifo found; size = 8192
<6>[ 0.602670] smd_alloc_channel() 'DATA7_CNTL' cid=42
<6>[ 0.603630] SMD Control Port Driver Initialized.
<6>[ 0.604486] SMD: ch 2 CLOSED -> OPENING
<6>[ 0.604610] SMD: ch 2 OPENING -> OPENED
<3>[ 0.605335] Using very old AMSS modem firmware.
<3>[ 0.605383] Using very old AMSS modem firmware.
<6>[ 0.605916] [adsp:adsp.c:adsp_init] rs3000000a:00010000 -- 0
<6>[ 0.609846] [msm-audio:audpp.c:audpp_probe] Number of decoder supported 5
<6>[ 0.609876] [msm-audio:audpp.c:audpp_probe] Number of concurrency supported 7
<6>[ 0.609903] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[ 0.609921] [msm-audio:audpp.c:audpp_probe] queueid:13
<6>[ 0.609936] [msm-audio:audpp.c:audpp_probe] decid:0
<6>[ 0.609953] [msm-audio:audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.609970] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[ 0.609991] [msm-audio:audpp.c:audpp_probe] queueid:14
<6>[ 0.610006] [msm-audio:audpp.c:audpp_probe] decid:1
<6>[ 0.610021] [msm-audio:audpp.c:audpp_probe] nr_codec_support:5
<6>[ 0.610038] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[ 0.610055] [msm-audio:audpp.c:audpp_probe] queueid:15
<6>[ 0.610071] [msm-audio:audpp.c:audpp_probe] decid:2
<6>[ 0.610086] [msm-audio:audpp.c:audpp_probe] nr_codec_support:5
<6>[ 0.610106] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[ 0.610125] [msm-audio:audpp.c:audpp_probe] queueid:16
<6>[ 0.610140] [msm-audio:audpp.c:audpp_probe] decid:3
<6>[ 0.611198] [msm-audio:audpp.c:audpp_probe] nr_codec_support:4
<6>[ 0.611218] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[ 0.611241] [msm-audio:audpp.c:audpp_probe] queueid:17
<6>[ 0.611256] [msm-audio:audpp.c:audpp_probe] decid:4
<6>[ 0.611271] [msm-audio:audpp.c:audpp_probe] nr_codec_support:1
<6>[ 0.627273] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 0.627285] tick = 161731
<6>[ 0.627290] stamp = 18371725
<4>[ 0.627323] /home/hudsonslave/root/workspace/offbuild_param_deckard1_0_release_caf_matrix/
HUDSON_PRODUCT/robyn/HUDSON_VARIANT/user/label/
BUILDNODE/kernel/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[ 0.628021] proximity-sensor: proximity_probe called.
<6>[ 0.628586] Registered semc device: proximity-sensor
<6>[ 0.628605] proximity-sensor: driver installation succeeded
<6>[ 0.641741] ashmem: initialized
<6>[ 0.643300] fuse init (API version 7.11)
<4>[ 0.643923] yaffs May 12 2010 22:12:25 Installing.
<6>[ 0.643985] msgmni has been set to 331
<6>[ 0.644051] io scheduler noop registered
<6>[ 0.644066] io scheduler anticipatory registered (default)
<6>[ 0.644856] msm_fb_probe: phy_Addr = 0x3799000 virt = 0x8e200000
<6>[ 0.646640] MDP HW Base phy_Address = 0xaa200000 virt = 0x8e100000
<6>[ 0.647323] primary mddi base phy_addr = 0xaa600000 virt = 0x8e00c000
<6>[ 0.659028] MDDI: Hitachi: Found display with cell ID = 0xfd, module ID = 0x2,
revision ID = 0x20, driver ID = 0x13
<6>[ 0.662831] FrameBuffer[0] 240x320 size=307200 bytes is registered successfully!
<6>[ 0.663513] Registered led device: lcd-backlight
<6>[ 0.684138] diagfwd initializing ..
<6>[ 0.684456] SMD: ch 1 CLOSED -> OPENING
<6>[ 0.684475] diag opened SMD port; r = 0
<6>[ 0.684560] SMD: ch 1 OPENING -> OPENED
<6>[ 0.684825] diagchar initializing ..
<6>[ 0.685311] diagchar initialized
<6>[ 0.685545] [drm] Initialized drm 1.1.0 20060810
<6>[ 0.685633] msm_serial: detected port #2
<6>[ 0.685736] msm_serial.2: ttyMSM2 at MMIO 0xa9c00000 (irq = 11) is a MSM
<6>[ 0.685855] msm_serial: console setup on port #2
<6>[ 0.685880] console [ttyMSM2] enabled
<6>[ 1.533379] msm_serial: driver initialized
<6>[ 1.535949] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[ 1.544018] msm_serial_hs module loaded
<6>[ 1.551528] brd: module loaded
<6>[ 1.555713] loop: module loaded
<6>[ 1.556083] pmem: 1 init
<6>[ 1.557169] pmem_adsp: 0 init
<6>[ 1.559469] pmem_gpu1: 0 init
<3>[ 1.563249] pmic-lightsensor: registered.
<6>[ 1.566681] SEMC_Systemconnector: Successfully initialized.
<6>[ 1.573843] Registered semc device: vibrator
<6>[ 1.575488] msm_pmic_vibrator version 0.1 loaded
<6>[ 1.580086] semc_power: Loading...
<6>[ 1.583503] bq24180: Setting up HW
<6>[ 1.586909] bq24180: Probing
<6>[ 1.589724] bq24180: Starting watchdog reset
<6>[ 1.594721] bq24180: BQ24180 not initialized by boot SW
<6>[ 1.599184] bq24180: Stopping watchdog reset
<6>[ 1.603738] bq24180: Found HW BQ24180 revision 0x01.
<6>[ 1.609509] bq24180: Set init values
<6>[ 1.611966] bq24180: Setting charger voltage to 0 mV
<6>[ 1.616998] bq24180: Setting charger current to 0 mA
<6>[ 1.621856] bq24180: Disable charger
<6>[ 1.625506] bq24180: Set safety timer to 0 minutes
<6>[ 1.630826] semc_pwr_pltf: Setting up platform
<3>[ 1.635348] power_supply battery: driver failed to report `status' property
<3>[ 1.642773] bq24180: Charger Ready
<6>[ 1.655369] PPP generic driver version 2.4.2
<6>[ 1.655963] PPP Deflate Compression module registered
<6>[ 1.659039] PPP BSD Compression module registered
<6>[ 1.663778] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256)
(6 bit encapsulation enabled).
<6>[ 1.673376] CSLIP: code copyright 1989 Regents of the University of California.
<6>[ 1.681729] rmnet0 (): not using net_device_ops yet
<6>[ 1.686136] rmnet1 (): not using net_device_ops yet
<6>[ 1.691033] rmnet2 (): not using net_device_ops yet
<6>[ 1.695803] Linux video capture interface: v2.00
<7>[ 1.813333] msm_camdrv: <<<<<<<<<< Camera vendor [0] >>>>>>>>>>>
<7>[ 1.813353] msm_camdrv: <<<<<<<<<< Camera revision[12307] >>>>>>>>>>>
<3>[ 1.930343] bq24180: Charger Ready
<6>[ 2.272261] msm_nand: phys addr 0xa0a00000 dmac 0x7
<6>[ 2.272399] allocated dma buffer at ffa1d000, dma_addr ccaf000
<6>[ 2.277611] status: e00020
<6>[ 2.280014] nandid: 5510bc20 maker 20 device bc
<6>[ 2.284563] ONFI probe : Found an ONFI compliant device NANDCBR4N9BZBC5
<6>[ 2.291658] Found a supported NAND device
<6>[ 2.295636] NAND Id : 0x5510bc20
<6>[ 2.298936] Buswidth : 16 Bits
<6>[ 2.302074] Density : 512 MByte
<6>[ 2.305273] Pagesize : 2048 Bytes
<6>[ 2.308571] Erasesize: 131072 Bytes
<6>[ 2.312053] Oobsize : 64 Bytes
<6>[ 2.315168] 2nd_bbm : 0
<6>[ 2.317686] CFG0 Init : 0xa85408c0
<6>[ 2.321254] CFG1 Init : 0x0004745e
<6>[ 2.324803] ECCBUFCFG : 0x00000203
<5>[ 2.328374] Creating 4 MTD partitions on "msm_nand":
<5>[ 2.333329] 0x000002c00000-0x00000fa00000 : "system"
<5>[ 2.339611] 0x00000fa00000-0x000012c00000 : "cache"
<5>[ 2.344109] 0x00001ffc0000-0x000020000000 : "appslog"
<5>[ 2.349089] 0x000012c00000-0x00001ffc0000 : "userdata"
<6>[ 2.354544] msm_hsusb_rpc_connect: rpc connect success vers = 10001
<3>[ 2.359533] msm_chg_rpc_connect: connect compatible failed
<6>[ 2.365201] usb_set_composition: composition set to product id = 3137
<6>[ 2.371554] phy info257)
<6>[ 2.374684] usb_probe() io=8e01a000, irq=47, dma=ffa1e000(cca4000)
<6>[ 2.380594] Created the sysfs entry successfully
<6>[ 2.385101] Created the functions sysfs entry successfully
<6>[ 2.391774] usb_function_register: name = 'adb', map = 1
<6>[ 2.396276] usb_function_register: name = 'mass_storage', map = 4
<6>[ 2.402186] usb_set_composition: composition set to product id = 3137
<3>[ 2.409271] msm_hsusb_is_serial_num_null: rpc call success
<3>[ 2.414694] msm_hsusb_send_serial_number: rpc call failed! error: -22
<3>[ 2.421243] msm_hsusb_send_productID: rpc call success
<6>[ 2.425584] msm_hsusb: functions bound. starting.
<6>[ 2.430314] usb_bind_func() (mass_storage)
<3>[ 2.434568] usb_start: pm_app_rpc connect failed
<6>[ 2.439526] usb_function_register: name = 'diag', map = 0
<6>[ 2.444514] msm_hsusb_phy_reset
<6>[ 2.448373] usb_function_register: name = 'modem', map = 2
<6>[ 2.453144] usb_function_register: name = 'nmea', map = 3
<6>[ 2.458578] usb_function_register: name = 'ethernet', map = 5
<6>[ 2.465061] synaptics_load_rmi4_func_regs: Func:f11_2D Query_Base:0x7a Cmd_Base:0x59 Ctrl_Base:0x26 Data_Base:0x18
<6>[ 2.475183] synaptics_load_rmi4_func_regs: Func:f08_BIST Query_Base:0x78 Cmd_Base:0x58 Ctrl_Base:0x20 Data_Base:0x15
<6>[ 2.485694] synaptics_load_rmi4_func_regs: Func:f01_RMI Query_Base:0x63 Cmd_Base:0x57 Ctrl_Base:0x1e Data_Base:0x13
<6>[ 2.601839] synaptics_ts_probe: nbr_panels:1 nbr_fingers:1 data_size:5
<6>[ 2.602733] synaptics_ts_probe: fw_rev:17 max_x:1632 max_y:2156
<6>[ 2.608656] synaptics_ts_probe: max_x 1632, max_y 2156
<6>[ 2.613771] synaptics_ts_probe: inactive_x 0 0, inactive_y 0 0
<6>[ 2.619574] synaptics_ts_probe: snap_x 0-0 0-0, snap_y 0-0 0-0
<6>[ 2.625904] input: synaptics-rmi-touchscreen as /devices/virtual/input/input0
<6>[ 2.633146] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode
<6>[ 2.641888] GPIO Matrix Keypad Driver: Start keypad matrix for robyn_keypad in interrupt mode
<6>[ 2.650031] input: robyn_keypad as /devices/virtual/input/input1
<7>[ 2.656608] RTC Registering with rs30000048:00010000
<7>[ 2.657676] msm_rtc: dev (254:0)
<6>[ 2.657724] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc as rtc0
<7>[ 2.664044] msm_rtc_secure: dev (254:1)
<6>[ 2.664064] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc_secure as rtc1
<6>[ 2.672664] i2c /dev entries driver
<6>[ 2.677203] input: compass as /devices/virtual/input/input2
<6>[ 2.730606] Bosch Sensortec Device detected!
<6>[ 2.730618] BMA150/SMB380 registered I2C driver!
<6>[ 2.733861] register_chrdev
<6>[ 2.736793] class_create ok
<6>[ 2.739681] BMA150 device create ok
<6>[ 2.743949] Bluetooth: HCI UART driver ver 2.2
<6>[ 2.747311] Bluetooth: HCI H4 protocol initialized
<6>[ 2.752108] Bluetooth: HCI BCSP protocol initialized
<6>[ 2.757029] Bluetooth: HCILL protocol initialized
<7>[ 2.761731] bluetooth_power_init
<7>[ 2.761814] bt_power_probe
<6>[ 2.763421] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,113 dma 8
<6>[ 2.768574] mmc0: 8 bit data mode disabled
<6>[ 2.772693] mmc0: 4 bit data mode enabled
<6>[ 2.776648] mmc0: polling status mode disabled
<6>[ 2.781116] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
<6>[ 2.787411] mmc0: Slot eject status = 0
<6>[ 2.791244] mmc0: Power save feature enable = 1
<6>[ 2.795749] mmc0: DM non-cached buffer at ffa20000, dma_addr 0x0cddc000
<6>[ 2.802356] mmc0: DM cmd busaddr 0x0cddc000, cmdptr busaddr 0x0cddc300
<6>[ 2.809724] lm3530 probing
<6>[ 2.815201] Registered semc device: lm3530-led
<6>[ 2.815973] lm3530 0-0036: version 0.1 loaded
<6>[ 2.820609] Adding I2C driver for LM35300)
<6>[ 2.824564] msm_pmic_flash_led probing
<6>[ 2.832014] Registered semc device: spotlight
<6>[ 2.832858] Registered semc device: flashled
<6>[ 2.836891] msm_pmic_flash_led version 0.1 loaded
<6>[ 2.845868] logger: created 64K log 'log_main'
<6>[ 2.846371] logger: created 256K log 'log_events'
<6>[ 2.856069] logger: created 64K log 'log_radio'
<6>[ 2.862094] Advanced Linux Sound Architecture Driver Version 1.0.18a.
<4>[ 2.868554] No device for DAI CODEC_DAI
<4>[ 2.868644] No device for DAI CPU_DAI
<3>[ 2.875876] msm_soc: create pcms
<6>[ 2.876268] asoc: CODEC_DAI <-> CPU_DAI mapping ok
<3>[ 2.878413] msm_soc: ALSA MSM Mixer Setting
<6>[ 2.884941] ALSA device list:
<6>[ 2.885529] #0: msm-audio (MSM-CARD)
<6>[ 2.889313] TCP cubic registered
<6>[ 2.892486] NET: Registered protocol family 17
<6>[ 2.896921] Bluetooth: L2CAP ver 2.13
<6>[ 2.900586] Bluetooth: L2CAP socket layer initialized
<6>[ 2.905568] Bluetooth: SCO (Voice Link) ver 0.6
<6>[ 2.910071] Bluetooth: SCO socket layer initialized
<6>[ 2.917104] Bluetooth: RFCOMM socket layer initialized
<6>[ 2.920104] Bluetooth: RFCOMM TTY layer initialized
<6>[ 2.924936] Bluetooth: RFCOMM ver 1.11
<6>[ 2.928651] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 2.933988] Bluetooth: BNEP filters: protocol multicast
<6>[ 2.939153] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 2.945766] RPC: Registered udp transport module.
<6>[ 2.949766] RPC: Registered tcp transport module.
<6>[ 2.954894] clock_late_init() disabled 15 unused clocks
<6>[ 2.960904] input: 7k_handset as /devices/virtual/input/input3
<6>[ 2.967043] smsm_entry 7, new intr_mask 0
<6>[ 2.969453] smsm_entry 6, new intr_mask 0
<6>[ 2.973643] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<6>[ 2.994258] [drm] Initialized kgsl 2.0.0 20090810 on minor 0
<6>[ 2.994918] msm_v4l2: msm_v4l2_init
<6>[ 2.998974] rs30000048:00010000 rs30000048:00010000: setting system
clock to 2010-06-26 06:06:05 UTC (1277532365)
<6>[ 3.008203] Freeing init memory: 140K
<6>[ 3.120511] usb_lpm_enter: usb in low power mode
<6>[ 3.120628] hsusb: IDLE -> OFFLINE
<3>[ 3.171403] init: /init.rc: 218: invalid option 'busybox'
<3>[ 3.172109] init: /init.delta.rc: 74: ignored duplicate definition of service 'qmuxd'
<4>[ 3.233606] mmc0: host does not support reading read-only switch. assuming write-enable.
<6>[ 3.236084] mmc0: new SD card at address aaaa
<6>[ 3.250378] mmcblk0: mmc0:aaaa SU02G 1.84 GiB
<6>[ 3.250734] mmcblk0: p1
<6>[ 3.363538] yaffs: dev is 32505856 name is "mtdblock0"
<6>[ 3.363658] yaffs: passed flags ""
<4>[ 3.366456] yaffs: Attempting MTD mount on 31.0, "mtdblock0"
<4>[ 3.476239] yaffs: restored from checkpoint
<4>[ 3.476386] yaffs_read_super: isCheckpointed 1
<6>[ 3.479724] yaffs: dev is 32505859 name is "mtdblock3"
<6>[ 3.484386] yaffs: passed flags ""
<4>[ 3.487751] yaffs: Attempting MTD mount on 31.3, "mtdblock3"
<4>[ 3.573716] yaffs: restored from checkpoint
<4>[ 3.585258] yaffs_read_super: isCheckpointed 0
<6>[ 3.591041] yaffs: dev is 32505857 name is "mtdblock1"
<6>[ 3.591156] yaffs: passed flags ""
<4>[ 3.593948] yaffs: Attempting MTD mount on 31.1, "mtdblock1"
<4>[ 3.601418] yaffs: restored from checkpoint
<4>[ 3.603759] yaffs_read_super: isCheckpointed 1
<3>[ 3.635841] init: execve /sbin/checkabortedflash
<3>[ 3.653221] init: waitpid return (PID = 1051)
<3>[ 3.653339] init: child process exited normally
<3>[ 3.741036] init: cannot find '/system/bin/playmp3', disabling 'bootsound'
<3>[ 3.772914] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<6>[ 3.894298] SMD: ch 40 CLOSED -> OPENING
<6>[ 3.894483] SMD: ch 40 OPENING -> OPENED
<6>[ 3.897733] SMD: ch 41 CLOSED -> OPENING
<6>[ 3.900471] SMD: ch 41 OPENING -> OPENED
<6>[ 3.905264] SMD: ch 42 CLOSED -> OPENING
<6>[ 3.908278] SMD: ch 42 OPENING -> OPENED
<6>[ 4.492636] bq24180: Set charger safety limit voltage to 4200 mV
<6>[ 4.494706] bq24180: Set charger safety limit current to 650 mA
<6>[ 4.496751] bq24180: Set charge current termination to 200 mA
<6>[ 4.504173] proximity-sensor (th_set): threshold=27
<6>[ 4.509206] proximity-sensor (hyst_set): hysteresis=8
<6>[ 5.448834] [msm-audio:snd.c:snd_ioctl] snd_agc_ctl 1
<6>[ 5.456164] warning: `Mixer Thread fo' uses 32-bit capabilities (legacy support in use)
<6>[ 5.458816] [msm-audio:snd.c:snd_ioctl] snd_set_device 29 1 1
<6>[ 5.468999] [msm-audio:snd.c:snd_ioctl] snd_set_device 29 1 0
<6>[ 5.477079] [msm-audio:snd.c:snd_ioctl] snd_set_volume 26 0 7
<6>[ 5.477841] [msm-audio:snd.c:snd_ioctl] snd_set_volume 27 0 7
<6>[ 5.480276] [msm-audio:snd.c:snd_ioctl] snd_set_volume 28 0 7
<6>[ 5.481043] [msm-audio:snd.c:snd_ioctl] snd_set_volume 29 0 7
<6>[ 5.481694] [msm-audio:snd.c:snd_ioctl] snd_set_volume 30 0 7
<6>[ 5.482381] [msm-audio:snd.c:snd_ioctl] snd_set_volume 31 0 7
<6>[ 5.483063] [msm-audio:snd.c:snd_ioctl] snd_set_volume 32 0 7
<6>[ 5.483968] [msm-audio:snd.c:snd_ioctl] snd_set_volume 33 0 7
<6>[ 5.484656] [msm-audio:snd.c:snd_ioctl] snd_set_volume 34 0 7
<6>[ 5.485271] [msm-audio:snd.c:snd_ioctl] snd_set_volume 35 0 7
<6>[ 5.485914] [msm-audio:snd.c:snd_ioctl] snd_set_volume 36 0 7
<6>[ 5.486613] [msm-audio:snd.c:snd_ioctl] snd_set_volume 37 0 7
<6>[ 5.487503] [msm-audio:snd.c:snd_ioctl] snd_set_volume 56 0 7
<6>[ 5.488218] [msm-audio:snd.c:snd_ioctl] snd_set_volume 38 0 7
<6>[ 5.488899] [msm-audio:snd.c:snd_ioctl] snd_set_volume 39 0 7
<6>[ 5.489566] [msm-audio:snd.c:snd_ioctl] snd_set_volume 40 0 7
<6>[ 5.490268] [msm-audio:snd.c:snd_ioctl] snd_set_volume 41 0 7
<6>[ 5.491174] [msm-audio:snd.c:snd_ioctl] snd_set_volume 42 0 7
<6>[ 5.491911] [msm-audio:snd.c:snd_ioctl] snd_set_volume 43 0 7
<6>[ 5.492576] [msm-audio:snd.c:snd_ioctl] snd_set_volume 44 0 7
<6>[ 5.493266] [msm-audio:snd.c:snd_ioctl] snd_set_volume 45 0 7
<6>[ 5.493894] [msm-audio:snd.c:snd_ioctl] snd_set_volume 46 0 7
<6>[ 5.494801] [msm-audio:snd.c:snd_ioctl] snd_set_volume 47 0 7
<6>[ 5.495534] [msm-audio:snd.c:snd_ioctl] snd_set_volume 48 0 7
<6>[ 5.496211] [msm-audio:snd.c:snd_ioctl] snd_set_volume 49 0 7
<6>[ 5.496873] [msm-audio:snd.c:snd_ioctl] snd_set_volume 50 0 7
<6>[ 5.497539] [msm-audio:snd.c:snd_ioctl] snd_set_volume 51 0 7
<6>[ 5.498448] [msm-audio:snd.c:snd_ioctl] snd_set_volume 52 0 7
<6>[ 5.499248] [msm-audio:snd.c:snd_ioctl] snd_set_volume 53 0 7
<6>[ 5.499889] [msm-audio:snd.c:snd_ioctl] snd_set_volume 54 0 7
<6>[ 5.500524] [msm-audio:snd.c:snd_ioctl] snd_set_volume 55 0 7
<6>[ 10.442193] pmem: successful request for physical address of pmem region id 3,
offset 41521152, len 4194304
<6>[ 10.500393] misc kgsl: firmware: requesting yamato_pm4.fw
<6>[ 10.510956] misc kgsl: firmware: requesting yamato_pfp.fw
<3>[ 10.512303] init: untracked pid 1153 exited
<3>[ 10.516329] init: untracked pid 1156 exited
<6>[ 33.928733] request_suspend_state: wakeup (3->0) at 33928558408
(2010-06-26 06:06:36.429746690 UTC)
<6>[ 35.140503] [msm-audio:snd.c:snd_ioctl] snd_set_volume 29 0 5
<6>[ 35.340956] [msm-audio:snd.c:snd_ioctl] snd_set_volume 29 0 7
<6>[ 36.830411] bq24180: Strange HW behaviour. Got safety timer fault but HW timer is disabled.
<3>[ 36.830448] bq24180: Charger Ready
<3>[ 37.130403] bq24180: Charger Ready
<6>[ 37.960528] input: systemconnector as /devices/virtual/input/input4
<7>[ 38.090198] SEMC_PHF (Interrupt handler) Status changed. Headset is not inserted
<6>[ 38.090639] semc_power: Disabling DCOUT. Current: 1000
<6>[ 52.121653] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 52.121664] tick = 1932058
<6>[ 52.121671] stamp = 50413832199208961
<6>[ 52.130404] rs30000048:00010000 rs30000048:00010000: setting system
clock to 2010-06-26 06:06:54 UTC (1277532414)
<3>[ 57.796259] binder: release proc 1527, transaction 6042, not freed
<6>[ 143.176619] [msm-audio:audmgr.c:audmgr_rpc_thread] start
<6>[ 143.184273] [msm-audio:audio_out.c:audio_enable]
<6>[ 143.184304] [msm-audio:audmgr.c:audmgr_enable] session 0x80532ca0
<6>[ 143.185274] [msm-audio:audmgr.crocess_audmgr_callback] rpc READY handle=0x00000000
<6>[ 143.185678] [msm-audio:audmgr.c:audmgr_rpc_thread] rpc_reply status 0
<6>[ 143.237589] [msm-audio:audmgr.crocess_audmgr_callback] rpc CODEC_CONFIG
volume=0x00000406
<6>[ 143.239933] [adsp:adsp.c:handle_adsp_rtos_mtoa_app] INIT_INFO Event
<6>[ 143.240533] [adsp:adsp.c:msm_adsp_get] opening module AUDPPTASK
<6>[ 143.241208] [adsp:adsp.c:msm_adsp_get] module AUDPPTASK has been registered
<6>[ 143.241234] [adsp:adsp.c:msm_adsp_enable] enable 'AUDPPTASK'state[0] id[17227122]
<6>[ 143.242614] [adsp:adsp.c:handle_adsp_rtos_mtoa_app] rpc event=0, proc_id=2,
module=17227122, image=0
<6>[ 143.243199] [adsp:adsp.c:handle_adsp_rtos_mtoa_app] module AUDPPTASK: READY
<6>[ 143.244721] [msm-audio:audpp.c:audpp_dsp_event] ENABLE
<6>[ 143.244749] [msm-audio:audio_out.c:audio_dsp_event] CFG_MSG ENABLE
<3>[ 143.244831] [adsp:adsp.c:__msm_adsp_write] failed to write queue 140, retry
<3>[ 143.244886] [adsp:adsp.c:__msm_adsp_write] failed to write queue 140, retry
<6>[ 146.284549] [msm-audio:audio_out.c:audio_dsp_event] PCMDMAMISSED 32
<6>[ 149.222186] [msm-audio:audio_out.c:audio_disable]
<6>[ 149.222828] [msm-audio:audio_out.c:audio_dsp_event] CFG_MSG DISABLE
<6>[ 149.222931] [msm-audio:audpp.c:audpp_dsp_event] DISABLE
<6>[ 149.223009] [msm-audio:audpp.c:audpp_disable] Received CFG_MSG_DISABLE from ADSP
<6>[ 149.223061] [adsp:adsp.c:msm_adsp_disable] disable 'AUDPPTASK'
<6>[ 149.226809] [adsp:adsp.c:msm_adsp_disable_locked] disable interrupt
<6>[ 149.226864] [adsp:adsp.c:msm_adsp_put] closing module AUDPPTASK
<6>[ 149.226948] [msm-audio:audmgr.c:audmgr_disable] session 0x80532ca0
<6>[ 149.230789] [msm-audio:audmgr.c:audmgr_rpc_thread] rpc_reply status 0
<3>[ 149.241483] [msm-audio:audmgr.crocess_audmgr_callback] DISABLED
Bin4ry said:
This user got update:
Phone Software Version:
1235-3408_1.1.A.0.8
GEBERIC - user
File System Version:
WORLD-1-8_1.1.A.0.8
German User!
Regards
Bin4ry
Click to expand...
Click to collapse
I take it he has a generic handset or does he have a provider handset?
*edit*
Just tried with no luck
*double post*
No OTA in Spain as well
Tried with Movistar, but it was already in 11A08 and said "already in latest version"; debranded to 10A136 and tried again but no luck,same message trought OTA. Update detected in SEUS from 10A136 to 11A08, updated succefully to debranded version.
Could it be that OTA examines both the Fyle System Version and Software Version? I entered service menu and the data was:
Phone Software Version
1235-3408_1.0.A.1.36
GENERIC - user
File System Version
WORLD-1-8_1.1A.0.8
So it seems that the software version was downgraded, but it kept the 11A08 in file system. Checking it in Settings-> About the Phone it was still marked as 11A08 Compilation.
Sorry for the long post, maybe it's all a nonsense, but just trying to get the OTA info I stepped into this and seemed curious... I'll keep checking.
Good luck for everybody!!
I have compiled the cm10 "deviced" generic/armv7-a. AND FOLLOW the instruction to run on emulator:http://wiki.cyanogen...ogenMod_(Linux)
try to run in the emulator with both the SDK android-16 kernel-qemu AND THE KERNEL in CM's repo prebuilts/qemu-kernel/arm/kernel-qemu-armv7
, but failed with black screen,not even textual "A N D R O I D". I dumped the kernel log
<6>Initializing cgroup subsys cpu
<5>Linux version 2.6.29-gc497e41 ([email protected]) (gcc version 4.4.3 (GCC) ) #2 Thu Dec 8 15:07:43 PST 2011
<4>CPU: ARMv7 Processor [410fc080] revision 0 (ARMv7), cr=10c5387f
<4>CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<4>Machine: Goldfish
<4>Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 87808
<7>free_area_init_node: node 0, pgdat c02f5a20, node_mem_map c0382000
<7> Normal zone: 686 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 87122 pages, LIFO batch:15
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 87122
<5>Kernel command line: qemu.gles=1 qemu=1 console=ttyS0 android.qemud=ttyS1 android.checkjni=1 ndns=1
<3>Unknown boot option `qemu.gles=1': ignoring
<3>Unknown boot option `android.qemud=ttyS1': ignoring
<3>Unknown boot option `android.checkjni=1': ignoring
<4>PID hash table entries: 2048 (order: 11, 8192 bytes)
<4>Console: colour dummy device 80x30
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 343MB = 343MB total
<5>Memory: 344064KB available (2756K code, 683K data, 108K init)
<6>Calibrating delay loop... 558.69 BogoMIPS (lpj=2793472)
<4>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys debug
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys freezer
<6>CPU: Testing write buffer coherency: ok
<6>net_namespace: 716 bytes
<6>NET: Registered protocol family 16
<4>bio: create slab <bio-0> at 0
<7>Switched to high resolution mode on CPU 0
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 16384 bind 16384)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 164K
<4>goldfish_new_pdev goldfish_interrupt_controller at ff000000 irq -1
<4>goldfish_new_pdev goldfish_device_bus at ff001000 irq 1
<4>goldfish_new_pdev goldfish_timer at ff003000 irq 3
<4>goldfish_new_pdev goldfish_rtc at ff010000 irq 10
<4>goldfish_new_pdev goldfish_tty at ff002000 irq 4
<4>goldfish_new_pdev goldfish_tty at ff011000 irq 11
<4>goldfish_new_pdev goldfish_tty at ff012000 irq 12
<4>goldfish_new_pdev smc91x at ff013000 irq 13
<4>goldfish_new_pdev goldfish_fb at ff014000 irq 14
<4>goldfish_new_pdev goldfish_audio at ff004000 irq 15
<4>goldfish_new_pdev goldfish_memlog at ff006000 irq -1
<4>goldfish_new_pdev goldfish_events at ff015000 irq 16
<4>goldfish_new_pdev goldfish_nand at ff016000 irq -1
<4>goldfish_new_pdev qemu_pipe at ff017000 irq 17
<4>goldfish_new_pdev goldfish-switch at ff019000 irq 18
<4>goldfish_new_pdev goldfish-switch at ff01a000 irq 19
<4>goldfish_pdev_worker registered goldfish_interrupt_controller
<4>goldfish_pdev_worker registered goldfish_device_bus
<4>goldfish_pdev_worker registered goldfish_timer
<4>goldfish_pdev_worker registered goldfish_rtc
<4>goldfish_pdev_worker registered goldfish_tty
<4>goldfish_pdev_worker registered goldfish_tty
<4>goldfish_pdev_worker registered goldfish_tty
<4>goldfish_pdev_worker registered smc91x
<4>goldfish_pdev_worker registered goldfish_fb
<4>goldfish_pdev_worker registered goldfish_audio
<4>goldfish_pdev_worker registered goldfish_memlog
<4>goldfish_pdev_worker registered goldfish_events
<4>goldfish_pdev_worker registered goldfish_nand
<4>goldfish_pdev_worker registered qemu_pipe
<4>goldfish_pdev_worker registered goldfish-switch
<4>goldfish_pdev_worker registered goldfish-switch
<6>ashmem: initialized
<6>Installing knfsd (copyright (C) 1996 [email protected]).
<4>yaffs Dec 8 2011 15:06:54 Installing.
<6>msgmni has been set to 672
<6>alg: No test for stdrng (krng)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered (default)
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<4>allocating frame buffer 480 * 800, got ffa00000
<6>console [ttyS0] enabled
<6>brd: module loaded
<6>loop: module loaded
<6>nbd: registered device at major 43
<4>goldfish_audio_probe
<6>tun: Universal TUN/TAP device driver, 1.6
<6>tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<4>smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <[email protected]>
<6>eth0 (smc91x): not using net_device_ops yet
<4>eth0: SMC91C11xFD (rev 1) at d580c000 IRQ 13 [nowait]
<4>eth0: Ethernet addr: 52:54:00:12:34:56
<7>eth0: No PHY found
<4>goldfish nand dev0: size c200000, page 2048, extra 64, erase 131072
<4>goldfish nand dev1: size c200000, page 2048, extra 64, erase 131072
<4>goldfish nand dev2: size 4000000, page 2048, extra 64, erase 131072
<6>mice: PS/2 mouse device common for all mice
<4>*** events probe ***
<4>events_probe() addr=0xd5814000 irq=16
<4>events_probe() keymap=qwerty2
<6>input: qwerty2 as /devices/virtual/input/input0
<6>goldfish_rtc goldfish_rtc: rtc core: registered goldfish_rtc as rtc0
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
<6>logger: created 64K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 64K log 'log_radio'
<6>TCP cubic registered
<6>NET: Registered protocol family 10
<6>IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
<6>All bugs added by David S. Miller <[email protected]>
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 0
<6>goldfish_rtc goldfish_rtc: setting system clock to 2012-12-07 07:15:01 UTC (1354864501)
<6>Freeing init memory: 108K
<3>init: could not import file '/init.trace.rc' from '/init.rc'
<3>init: could not import file '/init.cm.rc' from '/init.rc'
<3>init: cannot open '/initlogo.rle'
<6>yaffs: dev is 32505856 name is "mtdblock0"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.0, "mtdblock0"
<4>yaffs_read_super: isCheckpointed 0
<4>save exit: isCheckpointed 1
<6>yaffs: dev is 32505857 name is "mtdblock1"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.1, "mtdblock1"
<4>yaffs_read_super: isCheckpointed 0
<6>yaffs: dev is 32505858 name is "mtdblock2"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.2, "mtdblock2"
<4>yaffs_read_super: isCheckpointed 0
<3>init: cannot find '/system/bin/rild', disabling 'ril-daemon'
<6>eth0: link up
<6>request_suspend_state: wakeup (3->0) at 5024537940 (2012-12-07 07:15:05.946403531 UTC)
<6>request_suspend_state: wakeup (0->0) at 8038153272 (2012-12-07 07:15:08.960029916 UTC)
<3>init: untracked pid 203 exited
<7>eth0: no IPv6 routers present
<6>request_suspend_state: wakeup (0->0) at 13093743275 (2012-12-07 07:15:14.015619616 UTC)
<3>init: untracked pid 267 exited
<6>request_suspend_state: wakeup (0->0) at 18172982800 (2012-12-07 07:15:19.094859343 UTC)
<3>init: untracked pid 336 exited
<6>request_suspend_state: wakeup (0->0) at 23250891897 (2012-12-07 07:15:24.172746412 UTC)
<3>init: untracked pid 407 exited
<6>request_suspend_state: wakeup (0->0) at 28342599390 (2012-12-07 07:15:29.264476245 UTC)
<3>init: untracked pid 477 exited
<6>request_suspend_state: wakeup (0->0) at 33350444560 (2012-12-07 07:15:34.272321003 UTC)
<3>init: untracked pid 540 exited
WHAT'S WRONG? SOMEONE can help ME?
Hello,
I recently got an Archos 50 platinum and (like a fool) tried to use the roms/recoveries/boot of the Karbonn titanium S5.
Those phone are called (apparently not) to be same, but have been re-branded by local brand (Archos in Europe, Karbonn in India, and another one in Phillipines). they're all same chinese brand.
In fact it seems the internal memory table is not the same at all between those phones, and now my phone is completely mess.
When i try to boot a Archos logo show up 2 seconds and then :
red screen with UNAUTHORIZED IMAGE wrotten 3 times appears (i can't post image sorry)
After searched i found the supposed correct table from arctablet forum
System Partitions and overlay
/dev/block/mmcblk0p3 sys_boot partition (DO NOT PLAY WITH THIS PARTITION !!!)
/dev/block/mmcblk0p7 boot.img partition
/dev/block/mmcblk0p13 recovery.img partition
/dev/block/mmcblk0p16 persist partition
/dev/block/mmcblk0p17 system partition
/dev/block/mmcblk0p18 cache partition
/dev/block/mmcblk0p20 data partition
/dev/block/mmcblk0p21 media partition
Click to expand...
Click to collapse
And a busybox df -h shows :
~ # busybox df -h
Filesystem Size Used Available Use% Mounted on
tmpfs 417.5M 48.0K 417.4M 0% /dev
/dev/block/mmcblk0p18
98.4M 4.2M 94.2M 4% /cache
/dev/block/mmcblk0p21
1.4G 22.1M 1.3G 2% /data
/dev/block/mmcblk0p17
481.9M 446.4M 35.5M 93% /system
/dev/block/mmcblk1p1 7.4G 12.0K 7.4G 0% /sdcard
/dev/block/mmcblk0p3 199.8M 18.7M 181.1M 9% /sys_boot
/dev/block/mmcblk0p20
1.4G 4.0K 1.4G 0% /sdcard1
"I" also tweak the sys_boot partition. Found a new one, does a dd command on it, and now fastboot & recovery are workable.
(a bug into a not official CWM wiped the wrong memory :good Now it seems workable.
So actually, a log install looks like this :
Starting recovery on Sun Dec 22 11:48:51 2013
framebuffer: fd 4 (540 x 960)
ClockworkMod Recovery v6.0.3.5
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/mmcblk0p16 (null) 0
2 /cache ext4 /dev/block/mmcblk0p18 (null) 0
3 /data ext4 /dev/block/mmcblk0p21 (null) -16384
4 /recovery emmc /dev/block/mmcblk0p13 (null) 0
5 /misc emmc /dev/block/mmcblk0p11 (null) 0
6 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
7 /system ext4 /dev/block/mmcblk0p17 (null) 0
8 /sys_boot vfat /dev/block/mmcblk0p3 (null) 0
9 /FOTA emmc /dev/block/mmcblk0p19 (null) 0
10 /sdcard1 vfat /dev/block/mmcblk0p20 (null) 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
W:Unable to get recovery.fstab info for /external_sd during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
I:Checking arguments.
Warning: No file_contexts
Warning: No file_contexts
I:device_recovery_start()
Command: "/sbin/recovery"
ro.boot.hardware=qcom
ro.boot.emmc=true
ro.boot.serialno=A50PL
ro.boot.baseband=msm
ro.boot.mode=recovery
ro.serialno=A50PL
ro.bootmode=recovery
ro.baseband=msm
ro.bootloader=unknown
ro.hardware=qcom
ro.revision=0
ro.emmc=0
ro.factorytest=0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=adb
ro.build.id=JDQ39E
ro.build.display.id=cm_msm8625-userdebug 4.2.2 JDQ39E eng.hudson.20130810.084147 test-keys
ro.build.version.incremental=eng.hudson.20130810.084147
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Sat Aug 10 08:42:19 PDT 2013
ro.build.date.utc=0
ro.build.type=userdebug
ro.build.user=hudson
ro.build.host=koushik-lion
ro.build.tags=test-keys
ro.product.model=msm8625
ro.product.brand=archos
ro.product.name=cm_msm8625
ro.product.device=msm8625
ro.product.board=msm8625
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=archos
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=unknown
ro.build.product=msm8625
ro.build.description=cm_msm8625-userdebug 4.2.2 JDQ39E eng.hudson.20130810.084147 test-keys
ro.build.fingerprint=archos/cm_msm8625/msm8625:4.2.2/JDQ39E/eng.hudson.20130810.084147:userdebug/test-keys
ro.build.characteristics=default
ro.cm.device=msm8625
ro.rommanager.developerid=cyanogenmod
keyguard.no_require_sim=true
ro.url.legal=google link (can't post link sorry)
ro.url.legal.android_privacy=google link (can't post link sorry)
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.cm.version=10.1-20130810-UNOFFICIAL-msm8625
ro.modversion=10.1-20130810-UNOFFICIAL-msm8625
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Argon.ogg
ro.config.alarm_alert=Hassium.ogg
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
dalvik.vm.lockprof.threshold=500
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
-- Wiping data...
Formatting /data...
Creating filesystem with parameters:
Size: 1480572928
Block size: 4096
Blocks per group: 32768
Inodes per group: 7536
Inode size: 256
Journal blocks: 5647
Label:
Blocks: 361468
Block groups: 12
Reserved block group size: 95
Created filesystem with 11/90432 inodes and 11908/361468 blocks
Formatting /cache...
Creating filesystem with parameters:
Size: 104857600
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 25600
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/6400 inodes and 1438/25600 blocks
Formatting /sd-ext...
Formatting /sdcard/.android_secure...
I:Formatting unknown device.
Data wipe complete.
-- Wiping data...
Formatting /data...
Creating filesystem with parameters:
Size: 1480572928
Block size: 4096
Blocks per group: 32768
Inodes per group: 7536
Inode size: 256
Journal blocks: 5647
Label:
Blocks: 361468
Block groups: 12
Reserved block group size: 95
Created filesystem with 11/90432 inodes and 11908/361468 blocks
Formatting /cache...
Creating filesystem with parameters:
Size: 104857600
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 25600
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/6400 inodes and 1438/25600 blocks
Formatting /sd-ext...
Formatting /sdcard/.android_secure...
I:Formatting unknown device.
Data wipe complete.
-- Wiping data...
Formatting /data...
Creating filesystem with parameters:
Size: 1480572928
Block size: 4096
Blocks per group: 32768
Inodes per group: 7536
Inode size: 256
Journal blocks: 5647
Label:
Blocks: 361468
Block groups: 12
Reserved block group size: 95
Created filesystem with 11/90432 inodes and 11908/361468 blocks
Formatting /cache...
Creating filesystem with parameters:
Size: 104857600
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 25600
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/6400 inodes and 1438/25600 blocks
Formatting /sd-ext...
Formatting /sdcard/.android_secure...
I:Formatting unknown device.
Data wipe complete.
-- Wiping data...
Formatting /data...
Creating filesystem with parameters:
Size: 1480572928
Block size: 4096
Blocks per group: 32768
Inodes per group: 7536
Inode size: 256
Journal blocks: 5647
Label:
Blocks: 361468
Block groups: 12
Reserved block group size: 95
Created filesystem with 11/90432 inodes and 11908/361468 blocks
Formatting /cache...
Creating filesystem with parameters:
Size: 104857600
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 25600
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/6400 inodes and 1438/25600 blocks
Formatting /sd-ext...
Formatting /sdcard/.android_secure...
I:Formatting unknown device.
Data wipe complete.
-- Wiping data...
Formatting /data...
Creating filesystem with parameters:
Size: 1480572928
Block size: 4096
Blocks per group: 32768
Inodes per group: 7536
Inode size: 256
Journal blocks: 5647
Label:
Blocks: 361468
Block groups: 12
Reserved block group size: 95
Created filesystem with 11/90432 inodes and 11908/361468 blocks
Formatting /cache...
Creating filesystem with parameters:
Size: 104857600
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 25600
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/6400 inodes and 1438/25600 blocks
Formatting /sd-ext...
Formatting /sdcard/.android_secure...
I:Formatting unknown device.
Data wipe complete.
-- Wiping cache...
Formatting /cache...
Creating filesystem with parameters:
Size: 104857600
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 25600
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/6400 inodes and 1438/25600 blocks
Cache wipe complete.
-- Wiping cache...
Formatting /cache...
Creating filesystem with parameters:
Size: 104857600
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 25600
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/6400 inodes and 1438/25600 blocks
Cache wipe complete.
-- Wiping cache...
Formatting /cache...
Creating filesystem with parameters:
Size: 104857600
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 25600
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/6400 inodes and 1438/25600 blocks
Cache wipe complete.
-- Wiping cache...
Formatting /cache...
Creating filesystem with parameters:
Size: 104857600
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 25600
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/6400 inodes and 1438/25600 blocks
Cache wipe complete.
-- Wiping cache...
Formatting /cache...
Creating filesystem with parameters:
Size: 104857600
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 25600
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/6400 inodes and 1438/25600 blocks
Cache wipe complete.
Sideload started ...
Now send the package you want to apply
to the device with "adb sideload <filename>"...
sideload_service invoked
adbd exiting after successful sideload
E:listen on USB
E:userid is 2000
E:Event loop starting
I:sideload process finished
I:sideload thread finished
Restarting adbd...
Finding update package...
I:Update location: /tmp/update.zip
Opening update package...
Installing update...
No ret_pipe provided. Assuming old recovery version
installing QCOM updater extensions
installing QCOM updater extensions
installing QCOM updater extensions
installing QCOM updater extensions
installing QCOM updater extensions
installing QCOM updater extensions
Creating filesystem with parameters:
Size: 513802240
Block size: 4096
Blocks per group: 32768
Inodes per group: 7840
Inode size: 256
Journal blocks: 1960
Label:
Blocks: 125440
Block groups: 4
Reserved block group size: 31
Created filesystem with 11/31360 inodes and 4030/125440 blocks
minzip: Extracted file "/system/etc/install-recovery.sh"
minzip: Extracted file "/system/recovery-from-boot.p"
minzip: Extracted file "/system/app/ApplicationsProvider.apk"
[.........] // TEXT CUT HERE CAUSE IT WAS TOO LONG
partition read matched size 5132288 sha 4ce6944fbee8d31e0f24862737b67fd0231fafe2
script result was [/system]
Starting recovery on Sun Dec 22 12:17:40 2013
framebuffer: fd 4 (540 x 960)
ClockworkMod Recovery v6.0.3.5
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/mmcblk0p16 (null) 0
2 /cache ext4 /dev/block/mmcblk0p18 (null) 0
3 /data ext4 /dev/block/mmcblk0p21 (null) -16384
4 /recovery emmc /dev/block/mmcblk0p13 (null) 0
5 /misc emmc /dev/block/mmcblk0p11 (null) 0
6 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
7 /system ext4 /dev/block/mmcblk0p17 (null) 0
8 /sys_boot vfat /dev/block/mmcblk0p3 (null) 0
9 /FOTA emmc /dev/block/mmcblk0p19 (null) 0
10 /sdcard1 vfat /dev/block/mmcblk0p20 (null) 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
W:Unable to get recovery.fstab info for /external_sd during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
I:Checking arguments.
Warning: No file_contexts
Warning: No file_contexts
I:device_recovery_start()
Command: "/sbin/recovery"
ro.boot.hardware=qcom
ro.boot.emmc=true
ro.boot.serialno=A50PL
ro.boot.baseband=msm
ro.boot.mode=recovery
ro.serialno=A50PL
ro.bootmode=recovery
ro.baseband=msm
ro.bootloader=unknown
ro.hardware=qcom
ro.revision=0
ro.emmc=0
ro.factorytest=0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=adb
ro.build.id=JDQ39E
ro.build.display.id=cm_msm8625-userdebug 4.2.2 JDQ39E eng.hudson.20130810.084147 test-keys
ro.build.version.incremental=eng.hudson.20130810.084147
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Sat Aug 10 08:42:19 PDT 2013
ro.build.date.utc=0
ro.build.type=userdebug
ro.build.user=hudson
ro.build.host=koushik-lion
ro.build.tags=test-keys
ro.product.model=msm8625
ro.product.brand=archos
ro.product.name=cm_msm8625
ro.product.device=msm8625
ro.product.board=msm8625
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=archos
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=unknown
ro.build.product=msm8625
ro.build.description=cm_msm8625-userdebug 4.2.2 JDQ39E eng.hudson.20130810.084147 test-keys
ro.build.fingerprint=archos/cm_msm8625/msm8625:4.2.2/JDQ39E/eng.hudson.20130810.084147:userdebug/test-keys
ro.build.characteristics=default
ro.cm.device=msm8625
ro.rommanager.developerid=cyanogenmod
keyguard.no_require_sim=true
ro.url.legal= google link
ro.url.legal.android_privacy=h google link
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.cm.version=10.1-20130810-UNOFFICIAL-msm8625
ro.modversion=10.1-20130810-UNOFFICIAL-msm8625
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Argon.ogg
ro.config.alarm_alert=Hassium.ogg
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
dalvik.vm.lockprof.threshold=500
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
Starting recovery on Sun Dec 22 12:59:35 2013
framebuffer: fd 4 (540 x 960)
ClockworkMod Recovery v6.0.3.5
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/mmcblk0p16 (null) 0
2 /cache ext4 /dev/block/mmcblk0p18 (null) 0
3 /data ext4 /dev/block/mmcblk0p21 (null) -16384
4 /recovery emmc /dev/block/mmcblk0p13 (null) 0
5 /misc emmc /dev/block/mmcblk0p11 (null) 0
6 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
7 /system ext4 /dev/block/mmcblk0p17 (null) 0
8 /sys_boot vfat /dev/block/mmcblk0p3 (null) 0
9 /FOTA emmc /dev/block/mmcblk0p19 (null) 0
10 /sdcard1 vfat /dev/block/mmcblk0p20 (null) 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
W:Unable to get recovery.fstab info for /external_sd during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
I:Checking arguments.
Warning: No file_contexts
Warning: No file_contexts
I:device_recovery_start()
Command: "/sbin/recovery"
ro.boot.hardware=qcom
ro.boot.emmc=true
ro.boot.serialno=A50PL
ro.boot.baseband=msm
ro.boot.mode=recovery
ro.serialno=A50PL
ro.bootmode=recovery
ro.baseband=msm
ro.bootloader=unknown
ro.hardware=qcom
ro.revision=0
ro.emmc=0
ro.factorytest=0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=adb
ro.build.id=JDQ39E
ro.build.display.id=cm_msm8625-userdebug 4.2.2 JDQ39E eng.hudson.20130810.084147 test-keys
ro.build.version.incremental=eng.hudson.20130810.084147
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Sat Aug 10 08:42:19 PDT 2013
ro.build.date.utc=0
ro.build.type=userdebug
ro.build.user=hudson
ro.build.host=koushik-lion
ro.build.tags=test-keys
ro.product.model=msm8625
ro.product.brand=archos
ro.product.name=cm_msm8625
ro.product.device=msm8625
ro.product.board=msm8625
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=archos
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=unknown
ro.build.product=msm8625
ro.build.description=cm_msm8625-userdebug 4.2.2 JDQ39E eng.hudson.20130810.084147 test-keys
ro.build.fingerprint=archos/cm_msm8625/msm8625:4.2.2/JDQ39E/eng.hudson.20130810.084147:userdebug/test-keys
ro.build.characteristics=default
ro.cm.device=msm8625
ro.rommanager.developerid=cyanogenmod
keyguard.no_require_sim=true
ro.url.legal=link
ro.url.legal.android_privacy=link
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.cm.version=10.1-20130810-UNOFFICIAL-msm8625
ro.modversion=10.1-20130810-UNOFFICIAL-msm8625
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Argon.ogg
ro.config.alarm_alert=Hassium.ogg
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
dalvik.vm.lockprof.threshold=500
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
Sideload started ...
Now send the package you want to apply
to the device with "adb sideload <filename>"...
sideload_service invoked
adbd exiting after successful sideload
E:listen on USB
E:userid is 2000
E:Event loop starting
I:sideload process finished
I:sideload thread finished
Restarting adbd...
Finding update package...
I:Update location: /tmp/update.zip
Opening update package...
Installing update...
No ret_pipe provided. Assuming old recovery version
installing QCOM updater extensions
installing QCOM updater extensions
installing QCOM updater extensions
installing QCOM updater extensions
installing QCOM updater extensions
installing QCOM updater extensions
Creating filesystem with parameters:
Size: 513802240
Block size: 4096
Blocks per group: 32768
Inodes per group: 7840
Inode size: 256
Journal blocks: 1960
Label:
Blocks: 125440
Block groups: 4
Reserved block group size: 31
Created filesystem with 11/31360 inodes and 4030/125440 blocks
mount: failed to mount /dev/block/mmcblk0p17 at /system: Device or resource busy
minzip: Can't create containing directory for "/system/etc/install-recovery.sh": Read-only file system
minzip: Can't create containing directory for "/system/app/ApplicationsProvider.apk": Read-only file system
symlink: failed to symlink /system/etc/firmware/ath6k/AR6003/hw2.1.1/bdata.bin to /persist/bdata.bin: No such file or directory
script aborted: symlink: some symlinks failed
symlink: some symlinks failed
E:Error in /tmp/update.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
i'm using "Archos50PlatCWM" from globula_neagra xda user.
I guess errors comes from permissions or emmc partition problems... i'm not really aware about this stuffs.
Thanks for your help ! (Sorry if my message if full of text, i can't post images, you can ask me links by private message for more infos!)
Guuuyyyssss, i need your power !!
UP !
More info if it can helps :
/etc # tail recovery.fstab
# mount point fstype device [device2]
/boot emmc /dev/block/mmcblk0p16
/cache ext4 /dev/block/mmcblk0p18
/system ext4 /dev/block/mmcblk0p17
/misc emmc /dev/block/mmcblk0p11
/data ext4 /dev/block/mmcblk0p21 length=-16384
/recovery emmc /dev/block/mmcblk0p13
/emmc vfat /dev/block/mmcblk0p20
/sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1
/persist ext4 /dev/block/mmcblk0p15
# mount point fstype device [device2]
/boot emmc /dev/block/mmcblk0p16
/cache ext4 /dev/block/mmcblk0p18
/data ext4 /dev/block/mmcblk0p21 length=-16384
/recovery emmc /dev/block/mmcblk0p13
/misc emmc /dev/block/mmcblk0p11
/sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1
/system ext4 /dev/block/mmcblk0p17
/sys_boot vfat /dev/block/mmcblk0p3
/FOTA emmc /dev/block/mmcblk0p19
/sdcard1 vfat /dev/block/mmcblk0p20
2|[email protected]:/mnt/debugfs/memblock # cat memory
0: 0x00200000..0x0fbfffff
1: 0x0fc00800..0x0fcfffff
2: 0x0fd00020..0x0fdfffff
3: 0x0fe00008..0x364fffff
[email protected]:/mnt/debugfs/memblock # cat reserved
0: 0x00204000..0x00207fff
1: 0x002081c0..0x00ee34b7
2: 0x01500000..0x0158be4e
3: 0x329ec000..0x329fafff
4: 0x329fba80..0x329fffff
2|[email protected]:/mnt/debugfs/mempool # cat map
0x36500000 0x36500000 71303168 3 msm_ion_probe+0x2e4/0x4d8
0x3a900000 0x3a900000 237568 3 msm_ion_probe+0x2e4/0x4d8
0x3a93a000 0x3a93a000 36700160 3 msm_ion_probe+0x2e4/0x4d8
0x3cc3a000 0x3cc3a000 4096 3 acdb_init+0x13c/0x35c
0x3cc3b000 0x3cc3b000 4096 3 acdb_init+0x178/0x35c
0x3cc3c000 0x3cc3c000 4096 3 acdb_calibrate_device+0x58/0xba4
0x3cc3d000 0x3cc3d000 4096 3 acdb_calibrate_device+0xe0/0xba4
0x3cc3e000 0x3cc3e000 4096 3 acdb_calibrate_device+0x190/0xba4
0x3cc3f000 0x3cc3f000 4096 3 msm_pm_init+0xb4/0x5ec
Click to expand...
Click to collapse
UP !
Okay, i got some (good i think) evolutions.
If you want to flash the recovery on the Archos platinum 50 with a stock rom, the flashboot solution seems not good/not working.
What i did :
-Install TWRP, did a complete clean of all memories (no sys_boot, for sure)
-Install the Stock firmware, from Archos website, if the install fails, it's NORMAL. When asked to install su, say yes.
-After the failed install, you keep the Archos plugged to your computer.
-It will start with a Archos logo then Battery charging logo will appear.
-Which (i didn't know) you can do an "adb shell" when the battery in in charging mode (not recovery, or fastboot)
-You go to cd /etc
-go to root mode : su
-./install-recovery.sh
-Then the script will install and flash your recovery with the stock one. If there are errors, it's normal (i guess) just unplug your phone and replug it until you get a correct message. after doing it twice, i had no errors.
Click to expand...
Click to collapse
Now, my problem evolves.
I can access to "ENTRY QPST DOWNLOAD" by pressing Power+Volume Down button
I CANT access to "RESET FOR ENTRY QPST DOWNLOAD" by long pressing on Power+Volume Up button
It shows the same error as normal boot
-> **Red screen** UNAUTHORIZED IMAGE **Red screen**
So i'd like to know if i can fix my RESET QPST... from ENTRY QPST... ?
Thanks ! and Merry Xmas ! :laugh:
Dmesg
Hello guys, (even if since now i'm speaking alone x) )
i think i've found some interesting events into dmesg for my problem :
<6>
.... TEXT TOO LONG CUT .....
<1>[ 0.518438] [(1970-01-01 00:00:00.525550001 UTC)] [cpuid: 1] dma_test_init, minor number 36
<6>[ 0.518478] [(1970-01-01 00:00:00.525588335 UTC)] [cpuid: 1] WLAN power init
<6>[ 0.519713] [(1970-01-01 00:00:00.526825001 UTC)] [cpuid: 1] msm_pbus_handler_probe: PBUS handler initialized
<6>[ 0.528109] [(1970-01-01 00:00:00.535221668 UTC)] [cpuid: 0] __msm_rpc_connect: server not found 30000002:20001
<6>[ 0.531593] [(1970-01-01 00:00:00.538705001 UTC)] [cpuid: 0] rmt_storage_get_ramfs: RAMFS entry: addr = 0x3cec0000, size = 0x00300000
<6>[ 0.531643] [(1970-01-01 00:00:00.538753335 UTC)] [cpuid: 0] rmt_storage_get_ramfs: RAMFS entry: addr = 0x3cdc0000, size = 0x00100000
<6>[ 0.531951] [(1970-01-01 00:00:00.539063335 UTC)] [cpuid: 0] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized
<4>[ 0.722083] [(1970-01-01 00:00:00.729195001 UTC)] [cpuid: 1] highmem bounce pool size: 64 pages
<6>[ 0.736316] [(1970-01-01 00:00:00.743428335 UTC)] [cpuid: 1] fuse init (API version 7.18)
<7>[ 0.737089] [(1970-01-01 00:00:00.744200001 UTC)] [cpuid: 1] yaffs: yaffs built May 16 2013 18:46:47 Installing.
<6>[ 0.737169] [(1970-01-01 00:00:00.744280001 UTC)] [cpuid: 1] msgmni has been set to 1551
<4>[ 0.737749] [(1970-01-01 00:00:00.744860001 UTC)] [cpuid: 1] cryptomgr_test used greatest stack depth: 7096 bytes left
<6>[ 0.740301] [(1970-01-01 00:00:00.747411668 UTC)] [cpuid: 1] io scheduler noop registered
<6>[ 0.740678] [(1970-01-01 00:00:00.747790001 UTC)] [cpuid: 1] io scheduler cfq registered (default)
<6>[ 0.743559] [(1970-01-01 00:00:00.750671668 UTC)] [cpuid: 1] mipi_dsi base phy_addr = 0xa1100000 virt = 0xf3200000
<7>[ 0.743908] [(1970-01-01 00:00:00.751020001 UTC)] [cpuid: 1] mipi_hx8389b_lcd_probe
<7>[ 0.744318] [(1970-01-01 00:00:00.751428335 UTC)] [cpuid: 1] mipi_hx8389b_lcd_probe
<3>[ 0.763094] [(1970-01-01 00:00:00.770205001 UTC)] [cpuid: 1] --TY--lcd:truly_probe id=1(0:byd 1:truly)
<6>[ 0.763299] [(1970-01-01 00:00:00.770411668 UTC)] [cpuid: 1] setting pdata->panel_info.fb_num to 3. type: 8
<6>[ 0.763559] [(1970-01-01 00:00:00.770670001 UTC)] [cpuid: 1] DSI_TWO_LANES
<6>[ 0.771721] [(1970-01-01 00:00:00.778831668 UTC)] [cpuid: 1] FrameBuffer[0] 540x960 size=6266880 bytes is registered successfully!
<7>[ 0.772293] [(1970-01-01 00:00:00.779405001 UTC)] [cpuid: 1] Registered led device: lcd-backlight
<6>[ 0.772691] [(1970-01-01 00:00:00.779801668 UTC)] [cpuid: 1] msm_serial: detected port #0
<6>[ 0.772866] [(1970-01-01 00:00:00.779976668 UTC)] [cpuid: 1] msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 41) is a MSM
<6>[ 0.773754] [(1970-01-01 00:00:00.780866668 UTC)] [cpuid: 1] msm_serial: driver initialized
<6>[ 0.774533] [(1970-01-01 00:00:00.781645001 UTC)] [cpuid: 1] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 77) is a MSM HS UART
<6>[ 0.774928] [(1970-01-01 00:00:00.782038335 UTC)] [cpuid: 1] msm_serial_hs module loaded
<6>[ 0.776974] [(1970-01-01 00:00:00.784085001 UTC)] [cpuid: 1] diagchar initialized now
<4>[ 0.779934] [(1970-01-01 00:00:00.787045001 UTC)] [cpuid: 1] dalrpc_rcv_DAL0 used greatest stack depth: 6992 bytes left
<6>[ 0.780733] [(1970-01-01 00:00:00.787846668 UTC)] [cpuid: 1] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
<6>[ 0.788638] [(1970-01-01 00:00:00.795750001 UTC)] [cpuid: 1] loop: module loaded
<1>[ 0.788789] [(1970-01-01 00:00:00.795900001 UTC)] [cpuid: 1] pmem: pmem_setup: unable to register pmem driver(pmem) - zero size passed in!
<4>[ 0.788846] [(1970-01-01 00:00:00.795956668 UTC)] [cpuid: 1] android_pmem: probe of android_pmem.0 failed with error -1
<1>[ 0.788929] [(1970-01-01 00:00:00.796040001 UTC)] [cpuid: 1] pmem: pmem_setup: unable to register pmem driver(pmem_adsp) - zero size passed in!
<4>[ 0.788981] [(1970-01-01 00:00:00.796091668 UTC)] [cpuid: 1] android_pmem: probe of android_pmem.1 failed with error -1
<1>[ 0.789054] [(1970-01-01 00:00:00.796165001 UTC)] [cpuid: 1] pmem: pmem_setup: unable to register pmem driver(pmem_audio) - zero size passed in!
<4>[ 0.789104] [(1970-01-01 00:00:00.796215001 UTC)] [cpuid: 1] android_pmem: probe of android_pmem.2 failed with error -1
<4>[ 0.789416] [(1970-01-01 00:00:00.796526668 UTC)] [cpuid: 1] i2c-core: driver [mpu3050] using legacy suspend method
<4>[ 0.789454] [(1970-01-01 00:00:00.796565001 UTC)] [cpuid: 1] i2c-core: driver [mpu3050] using legacy resume method
<6>[ 0.789504] [(1970-01-01 00:00:00.796615001 UTC)] [cpuid: 1] mpu_init: Probe name mpu3050
<6>[ 1.004073] [(1970-01-01 00:00:01.011185002 UTC)] [cpuid: 0] SCSI Media Changer driver v0.25
<6>[ 1.005419] [(1970-01-01 00:00:01.012530002 UTC)] [cpuid: 0] msm_nand_probe: phys addr 0xa0a00000
<6>[ 1.005461] [(1970-01-01 00:00:01.012571669 UTC)] [cpuid: 0] msm_nand_probe: Dual Nand Ctrl in ping-pong mode
<6>[ 1.005501] [(1970-01-01 00:00:01.012611669 UTC)] [cpuid: 0] msm_nand_probe: dmac 0x7
<6>[ 1.005576] [(1970-01-01 00:00:01.012686669 UTC)] [cpuid: 0] msm_nand_probe: allocated dma buffer at ffdec000, dma_addr 31f0c000
<3>[ 1.005936] [(1970-01-01 00:00:01.013050002 UTC)] [cpuid: 1] flash_onfi_probe: No partition info available
<6>[ 1.006204] [(1970-01-01 00:00:01.013316669 UTC)] [cpuid: 1] status: 20
<6>[ 1.006241] [(1970-01-01 00:00:01.013353336 UTC)] [cpuid: 1] nandid: 20202020 maker 20 device 20
<3>[ 1.006283] [(1970-01-01 00:00:01.013393336 UTC)] [cpuid: 1] ERROR: unknown nand device manuf=20 devid=20
<6>[ 1.006428] [(1970-01-01 00:00:01.013538336 UTC)] [cpuid: 1] SFLASHC Async Mode bit: 0
<6>[ 1.006583] [(1970-01-01 00:00:01.013695002 UTC)] [cpuid: 1] =================================================================
<6>[ 1.006628] [(1970-01-01 00:00:01.013738336 UTC)] [cpuid: 1] flash_onenand_probe: manufacturer_id = 0x4000
<6>[ 1.006663] [(1970-01-01 00:00:01.013773336 UTC)] [cpuid: 1] flash_onenand_probe: device_id = 0x4000
<6>[ 1.006698] [(1970-01-01 00:00:01.013808336 UTC)] [cpuid: 1] flash_onenand_probe: version_id = 0x4002
<6>[ 1.006733] [(1970-01-01 00:00:01.013843336 UTC)] [cpuid: 1] flash_onenand_probe: data_buf_size = 0x5002
<6>[ 1.006768] [(1970-01-01 00:00:01.013878336 UTC)] [cpuid: 1] flash_onenand_probe: boot_buf_size = 0x4000
<6>[ 1.006801] [(1970-01-01 00:00:01.013911669 UTC)] [cpuid: 1] flash_onenand_probe: num_of_buffers = 0x4000
<6>[ 1.006836] [(1970-01-01 00:00:01.013946669 UTC)] [cpuid: 1] flash_onenand_probe: technology = 0x5002
<6>[ 1.006869] [(1970-01-01 00:00:01.013980002 UTC)] [cpuid: 1] =================================================================
<6>[ 1.006906] [(1970-01-01 00:00:01.014016669 UTC)] [cpuid: 1] flash_onenand_probe: Detected an unsupported device
<3>[ 1.006941] [(1970-01-01 00:00:01.014051669 UTC)] [cpuid: 1] msm_nand_probe: No nand device found
<6>[ 1.007214] [(1970-01-01 00:00:01.014325002 UTC)] [cpuid: 1] tun: Universal TUN/TAP device driver, 1.6
<6>[ 1.007251] [(1970-01-01 00:00:01.014361669 UTC)] [cpuid: 1] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[ 1.007444] [(1970-01-01 00:00:01.014555002 UTC)] [cpuid: 1] rmnet_init: SMD devices[8]
<6>[ 1.015289] [(1970-01-01 00:00:01.022401669 UTC)] [cpuid: 1] PPP generic driver version 2.4.2
<6>[ 1.015566] [(1970-01-01 00:00:01.022678336 UTC)] [cpuid: 1] PPP BSD Compression module registered
<6>[ 1.015604] [(1970-01-01 00:00:01.022715002 UTC)] [cpuid: 1] PPP Deflate Compression module registered
<4>[ 1.017233] [(1970-01-01 00:00:01.024345002 UTC)] [cpuid: 3] modprobe used greatest stack depth: 6172 bytes left
<6>[ 1.019226] [(1970-01-01 00:00:01.026338336 UTC)] [cpuid: 1] PPP MPPE Compression module registered
<6>[ 1.019274] [(1970-01-01 00:00:01.026385002 UTC)] [cpuid: 1] NET: Registered protocol family 24
<6>[ 1.020318] [(1970-01-01 00:00:01.027430002 UTC)] [cpuid: 1] __msm_rpc_connect: server not found 3000001a:40001
<6>[ 1.020366] [(1970-01-01 00:00:01.027476669 UTC)] [cpuid: 1] __msm_rpc_connect: server not found 3000001a:30001
<6>[ 1.020406] [(1970-01-01 00:00:01.027516669 UTC)] [cpuid: 1] __msm_rpc_connect: server not found 3000001a:20001
<6>[ 1.020748] [(1970-01-01 00:00:01.027858336 UTC)] [cpuid: 1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.020979] [(1970-01-01 00:00:01.028091669 UTC)] [cpuid: 1] host driver registered w/ tranceiver
<6>[ 1.021296] [(1970-01-01 00:00:01.028408335 UTC)] [cpuid: 1] usbcore: registered new interface driver cdc_acm
<6>[ 1.021336] [(1970-01-01 00:00:01.028446669 UTC)] [cpuid: 1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 1.021374] [(1970-01-01 00:00:01.028485002 UTC)] [cpuid: 1] Initializing USB Mass Storage driver...
<6>[ 1.021504] [(1970-01-01 00:00:01.028615002 UTC)] [cpuid: 1] usbcore: registered new interface driver usb-storage
<6>[ 1.021541] [(1970-01-01 00:00:01.028651669 UTC)] [cpuid: 1] USB Mass Storage support registered.
<6>[ 1.021633] [(1970-01-01 00:00:01.028743335 UTC)] [cpuid: 1] usbcore: registered new interface driver ums-alauda
<6>[ 1.021726] [(1970-01-01 00:00:01.028836669 UTC)] [cpuid: 1] usbcore: registered new interface driver ums-cypress
<6>[ 1.021819] [(1970-01-01 00:00:01.028930002 UTC)] [cpuid: 1] usbcore: registered new interface driver ums-datafab
<6>[ 1.021913] [(1970-01-01 00:00:01.029023335 UTC)] [cpuid: 1] usbcore: registered new interface driver ums-freecom
<6>[ 1.022021] [(1970-01-01 00:00:01.029131669 UTC)] [cpuid: 1] usbcore: registered new interface driver ums-isd200
<6>[ 1.022119] [(1970-01-01 00:00:01.029230002 UTC)] [cpuid: 1] usbcore: registered new interface driver ums-jumpshot
<6>[ 1.022211] [(1970-01-01 00:00:01.029321669 UTC)] [cpuid: 1] usbcore: registered new interface driver ums-karma
<6>[ 1.022304] [(1970-01-01 00:00:01.029415002 UTC)] [cpuid: 1] usbcore: registered new interface driver ums-onetouch
<6>[ 1.022398] [(1970-01-01 00:00:01.029508335 UTC)] [cpuid: 1] usbcore: registered new interface driver ums-sddr09
<6>[ 1.022489] [(1970-01-01 00:00:01.029601669 UTC)] [cpuid: 1] usbcore: registered new interface driver ums-sddr55
<6>[ 1.022584] [(1970-01-01 00:00:01.029695002 UTC)] [cpuid: 1] usbcore: registered new interface driver ums-usbat
<6>[ 1.022689] [(1970-01-01 00:00:01.029800002 UTC)] [cpuid: 1] usbcore: registered new interface driver usb_ehset_test
<6>[ 1.023519] [(1970-01-01 00:00:01.030633336 UTC)] [cpuid: 1] peripheral driver registered w/ tranceiver
<6>[ 1.024613] [(1970-01-01 00:00:01.031725002 UTC)] [cpuid: 1] mbim_init: initialize 1 instances
<6>[ 1.024816] [(1970-01-01 00:00:01.031926669 UTC)] [cpuid: 1] mbim_init: Initialized 1 ports
<3>[ 1.027531] [(1970-01-01 00:00:01.034643336 UTC)] [cpuid: 1] mass_storage_function_init: ShenLei;config->fsg.nluns=3
<6>[ 1.028001] [(1970-01-01 00:00:01.035113336 UTC)] [cpuid: 1] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 1.028046] [(1970-01-01 00:00:01.035156669 UTC)] [cpuid: 1] android_usb gadget: Number of LUNs=3
<6>[ 1.028086] [(1970-01-01 00:00:01.035196669 UTC)] [cpuid: 1] lun0: LUN: removable read only CD-ROM file: (no medium)
<6>[ 1.028124] [(1970-01-01 00:00:01.035235002 UTC)] [cpuid: 1] lun1: LUN: removable file: (no medium)
<6>[ 1.028163] [(1970-01-01 00:00:01.035273336 UTC)] [cpuid: 1] lun2: LUN: removable file: (no medium)
<6>[ 1.028684] [(1970-01-01 00:00:01.035796669 UTC)] [cpuid: 1] android_usb gadget: android_usb ready
<6>[ 1.029648] [(1970-01-01 00:00:01.036758336 UTC)] [cpuid: 1] rmi_bus_init: RMI Bus Driver Init
<7>[ 1.029764] [(1970-01-01 00:00:01.036875002 UTC)] [cpuid: 1] rmi_bus_init: registered bus.
<7>[ 1.029799] [(1970-01-01 00:00:01.036910002 UTC)] [cpuid: 1] rmi_sensor_init: RMI Sensor Init
<7>[ 1.029833] [(1970-01-01 00:00:01.036943336 UTC)] [cpuid: 1] rmi_function_init: RMI Function Init
<4>[ 1.029953] [(1970-01-01 00:00:01.037063336 UTC)] [cpuid: 1] i2c-core: driver [rmi4_ts] using legacy suspend method
<4>[ 1.029989] [(1970-01-01 00:00:01.037100002 UTC)] [cpuid: 1] i2c-core: driver [rmi4_ts] using legacy resume method
<6>[ 1.030456] [(1970-01-01 00:00:01.037566669 UTC)] [cpuid: 1] input: ft5x06_ts as /devices/i2c-1/1-0038/input/input0
<4>[ 1.031191] [(1970-01-01 00:00:01.038301669 UTC)] [cpuid: 1] ldo12: Failed to create debugfs directory
<4>[ 1.031243] [(1970-01-01 00:00:01.038355002 UTC)] [cpuid: 1] smps3: Failed to create debugfs directory
<6>[ 1.402996] [(1970-01-01 00:00:01.410108336 UTC)] [cpuid: 0] ft5x06_ts 1-0038: [FTS] Firmware version = 0x31
<6>[ 1.432974] [(1970-01-01 00:00:01.440086669 UTC)] [cpuid: 0] ft5x06_ts 1-0038: [FTS] report rate is 80Hz.
<4>[ 1.463304] [(1970-01-01 00:00:01.470416669 UTC)] [cpuid: 0] touch_ctrl_init, register chrdev(244, 0)
<6>[ 1.463916] [(1970-01-01 00:00:01.471028336 UTC)] [cpuid: 0] GPIO Matrix Keypad Driver: Start keypad matrix for
<7>[ 2.035133] [(1970-01-01 00:00:02.042243336 UTC)] [cpuid: 0] BATT: start charging
<7>[ 2.035166] [(1970-01-01 00:00:02.042276669 UTC)] [cpuid: 0] BATT: unknown charger inserted
<7>[ 2.035199] [(1970-01-01 00:00:02.042310002 UTC)] [cpuid: 0] BATT: charger type changed
<7>[ 2.035233] [(1970-01-01 00:00:02.042343336 UTC)] [cpuid: 0] BATT: unknown charger inserted
<6>[ 2.036488] [(1970-01-01 00:00:02.043598336 UTC)] [cpuid: 0] msm_adc successfully registered
<6>[ 2.036524] [(1970-01-01 00:00:02.043635002 UTC)] [cpuid: 0] msm_adc successfully registered
<6>[ 2.036699] [(1970-01-01 00:00:02.043811669 UTC)] [cpuid: 0] thermal_init
<6>[ 2.037899] [(1970-01-01 00:00:02.045011669 UTC)] [cpuid: 0] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
<6>[ 2.038246] [(1970-01-01 00:00:02.045358336 UTC)] [cpuid: 0] Bluetooth: HCI UART driver ver 2.2
<6>[ 2.038284] [(1970-01-01 00:00:02.045395002 UTC)] [cpuid: 0] Bluetooth: HCI H4 protocol initialized
<6>[ 2.038318] [(1970-01-01 00:00:02.045428336 UTC)] [cpuid: 0] Bluetooth: HCI_IBS protocol initialized
<6>[ 2.040134] [(1970-01-01 00:00:02.047246669 UTC)] [cpuid: 0] mmc0: SDCC Version: 0x00000000
<3>[ 2.040379] [(1970-01-01 00:00:02.047490002 UTC)] [cpuid: 0] mmc0: No card detect facilities available
<6>[ 2.042448] [(1970-01-01 00:00:02.049560002 UTC)] [cpuid: 0] mmc0: Qualcomm MSM SDCC-core at 0x00000000a0600000 irq 80,0 dma 7 dmacrcri 12
<6>[ 2.042493] [(1970-01-01 00:00:02.049603335 UTC)] [cpuid: 0] mmc0: Controller capabilities: 0x00000001
<6>[ 2.042528] [(1970-01-01 00:00:02.049638335 UTC)] [cpuid: 0] mmc0: 8 bit data mode enabled
<6>[ 2.042559] [(1970-01-01 00:00:02.049670002 UTC)] [cpuid: 0] mmc0: 4 bit data mode disabled
<6>[ 2.042593] [(1970-01-01 00:00:02.049703335 UTC)] [cpuid: 0] mmc0: polling status mode disabled
<6>[ 2.042629] [(1970-01-01 00:00:02.049740002 UTC)] [cpuid: 0] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 61440000 Hz
<6>[ 2.042664] [(1970-01-01 00:00:02.049775002 UTC)] [cpuid: 0] mmc0: Slot eject status = 0
<6>[ 2.042696] [(1970-01-01 00:00:02.049806669 UTC)] [cpuid: 0] mmc0: Power save feature enable = 1
<6>[ 2.042734] [(1970-01-01 00:00:02.049845002 UTC)] [cpuid: 0] mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x31820000
<6>[ 2.042773] [(1970-01-01 00:00:02.049883335 UTC)] [cpuid: 0] mmc0: DM cmd busaddr 0x31820000, cmdptr busaddr 0x31837f40
<6>[ 2.043638] [(1970-01-01 00:00:02.050750002 UTC)] [cpuid: 0] mmc1: SDCC Version: 0x00000000
<3>[ 2.043904] [(1970-01-01 00:00:02.051015002 UTC)] [cpuid: 0] mmc1: No card detect facilities available
<6>[ 2.045394] [(1970-01-01 00:00:02.052505002 UTC)] [cpuid: 0] mmc1: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 56,0 dma 8 dmacrcri 6
<6>[ 2.045438] [(1970-01-01 00:00:02.052548336 UTC)] [cpuid: 0] mmc1: Controller capabilities: 0x00000001
<6>[ 2.045473] [(1970-01-01 00:00:02.052583336 UTC)] [cpuid: 0] mmc1: 8 bit data mode disabled
<6>[ 2.045504] [(1970-01-01 00:00:02.052615002 UTC)] [cpuid: 0] mmc1: 4 bit data mode enabled
<6>[ 2.045536] [(1970-01-01 00:00:02.052646669 UTC)] [cpuid: 0] mmc1: polling status mode disabled
<6>[ 2.045573] [(1970-01-01 00:00:02.052683336 UTC)] [cpuid: 0] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 61440000 Hz
<6>[ 2.045609] [(1970-01-01 00:00:02.052720002 UTC)] [cpuid: 0] mmc1: Slot eject status = 0
<6>[ 2.045641] [(1970-01-01 00:00:02.052751669 UTC)] [cpuid: 0] mmc1: Power save feature enable = 1
<6>[ 2.045678] [(1970-01-01 00:00:02.052788336 UTC)] [cpuid: 0] mmc1: DM non-cached buffer at ffd60000, dma_addr 0x31860000
<6>[ 2.045716] [(1970-01-01 00:00:02.052826669 UTC)] [cpuid: 0] mmc1: DM cmd busaddr 0x31860000, cmdptr busaddr 0x31877f40
<6>[ 2.046498] [(1970-01-01 00:00:02.053610002 UTC)] [cpuid: 0] mmc2: SDCC Version: 0x00000000
<3>[ 2.046831] [(1970-01-01 00:00:02.053943336 UTC)] [cpuid: 0] mmc2: No card detect facilities available
<6>[ 2.048279] [(1970-01-01 00:00:02.055391669 UTC)] [cpuid: 0] mmc2: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 58,0 dma 5 dmacrcri 7
<6>[ 2.048323] [(1970-01-01 00:00:02.055433336 UTC)] [cpuid: 0] mmc2: Controller capabilities: 0x00000001
<6>[ 2.048358] [(1970-01-01 00:00:02.055468336 UTC)] [cpuid: 0] mmc2: 8 bit data mode disabled
<6>[ 2.048389] [(1970-01-01 00:00:02.055500002 UTC)] [cpuid: 0] mmc2: 4 bit data mode enabled
<6>[ 2.048423] [(1970-01-01 00:00:02.055533336 UTC)] [cpuid: 0] mmc2: polling status mode disabled
<6>[ 2.048458] [(1970-01-01 00:00:02.055568336 UTC)] [cpuid: 0] mmc2: MMC clock 144000 -> 49152000 Hz, PCLK 61440000 Hz
<6>[ 2.143738] [(2013-12-25 20:30:49.500604999 UTC)] [cpuid: 1] ALSA device list:
<6>[ 2.143761] [(2013-12-25 20:30:49.500624999 UTC)] [cpuid: 1] #0: msm-audio
<6>[ 2.144146] [(2013-12-25 20:30:49.501011666 UTC)] [cpuid: 1] Freeing init memory: 224K
<3>[ 2.147629] [(2013-12-25 20:30:49.504494999 UTC)] [cpuid: 2] init: could not import file '/init.recovery.u86.rc' from '/init.rc'
<3>[ 2.149694] [(2013-12-25 20:30:49.506561666 UTC)] [cpuid: 0] init: invalid uid 'fm_radio'
<4>[ 2.193394] [(2013-12-25 20:30:49.550260000 UTC)] [cpuid: 1] Current cpr chip the floor_fuse=0 pvs_fuse=3 RBCPR_GCNT_TARGET(2): = 0x550
<4>[ 2.193423] [(2013-12-25 20:30:49.550286667 UTC)] [cpuid: 1] cur_volt 0 uV (railway_voltage: 1300000 uV)
<6>[ 2.215664] [(2013-12-25 20:30:49.572530000 UTC)] [cpuid: 1] mmc0: new high speed MMC card at address 0001
<6>[ 2.216273] [(2013-12-25 20:30:49.573138333 UTC)] [cpuid: 1] mmcblk0: mmc0:0001 H4G1d 3.60 GiB
<6>[ 2.230954] [(2013-12-25 20:30:49.587820000 UTC)] [cpuid: 1] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 >
<4>[ 2.244874] [(2013-12-25 20:30:49.601741667 UTC)] [cpuid: 1] Current cpr chip the floor_fuse=0 pvs_fuse=3 RBCPR_GCNT_TARGET(2): = 0x550
<4>[ 2.244906] [(2013-12-25 20:30:49.601771667 UTC)] [cpuid: 1] cur_volt 1300000 uV (railway_voltage: 1287500 uV)
<4>[ 2.257026] [(2013-12-25 20:30:49.613891667 UTC)] [cpuid: 1] mmc1: issue a hw reset now
<3>[ 2.269513] [(2013-12-25 20:30:49.626380000 UTC)] [cpuid: 2] init: cannot open '/initlogo.rle'
<3>[ 2.270131] [(2013-12-25 20:30:49.626996666 UTC)] [cpuid: 2] enable_store: android_usb: already disabled
<3>[ 2.270643] [(2013-12-25 20:30:49.627508333 UTC)] [cpuid: 2] init: Unable to open persistent property directory /data/property errno: 2
<3>[ 2.272733] [(2013-12-25 20:30:49.629600000 UTC)] [cpuid: 2] enable_store: android_usb: already disabled
<4>[ 2.273534] [(2013-12-25 20:30:49.630401667 UTC)] [cpuid: 1] rmt_storage_rec (108): /proc/108/oom_adj is deprecated, please use /proc/108/oom_score_adj instead.
<6>[ 2.279301] [(2013-12-25 20:30:49.636173333 UTC)] [cpuid: 0] adb_open
<6>[ 2.279338] [(2013-12-25 20:30:49.636205000 UTC)] [cpuid: 0] adb_bind_config
<4>[ 2.283716] [(2013-12-25 20:30:49.640583333 UTC)] [cpuid: 3] msm_fb_blank_sub blank_mode =0
<4>[ 2.298251] [(2013-12-25 20:30:49.655116667 UTC)] [cpuid: 1] Current cpr chip the floor_fuse=0 pvs_fuse=3 RBCPR_GCNT_TARGET(2): = 0x550
<4>[ 2.298273] [(2013-12-25 20:30:49.655136667 UTC)] [cpuid: 1] cur_volt 1287500 uV (railway_voltage: 1275000 uV)
<7>[ 2.335448] [(2013-12-25 20:30:49.692315001 UTC)] [cpuid: 3] pmapp_rpc_req_reply: successfully connected to 0x70001 rpc version
<7>[ 2.339313] [(2013-12-25 20:30:49.696180000 UTC)] [cpuid: 3] mipi_hx8389b_lcd_on E
<4>[ 2.349651] [(2013-12-25 20:30:49.706516667 UTC)] [cpuid: 1] Current cpr chip the floor_fuse=0 pvs_fuse=3 RBCPR_GCNT_TARGET(2): = 0x550
<4>[ 2.349673] [(2013-12-25 20:30:49.706536667 UTC)] [cpuid: 1] cur_volt 1275000 uV (railway_voltage: 1262500 uV)
<4>[ 2.381078] [(2013-12-25 20:30:49.737946667 UTC)] [cpuid: 0] mmc1: host does not support reading read-only switch. assuming write-enable.
<6>[ 2.386229] [(2013-12-25 20:30:49.743095000 UTC)] [cpuid: 0] mmc1: new high speed SDHC card at address f5f8
<6>[ 2.386839] [(2013-12-25 20:30:49.743705000 UTC)] [cpuid: 0] mmcblk1: mmc1:f5f8 SD08G 7.42 GiB
<6>[ 2.388261] [(2013-12-25 20:30:49.745126667 UTC)] [cpuid: 0] mmcblk1: p1
<4>[ 2.401111] [(2013-12-25 20:30:49.757976667 UTC)] [cpuid: 1] Current cpr chip the floor_fuse=0 pvs_fuse=3 RBCPR_GCNT_TARGET(2): = 0x550
<4>[ 2.401139] [(2013-12-25 20:30:49.758003333 UTC)] [cpuid: 1] cur_volt 1262500 uV (railway_voltage: 1250000 uV)
<6>[ 2.410674] [(2013-12-25 20:30:49.767545000 UTC)] [cpuid: 0]
<6>[ 2.410694] [(2013-12-25 20:30:49.767560000 UTC)] [cpuid: 0] Charger Type: STD DOWNSTREAM PORT
<4>[ 2.457614] [(2013-12-25 20:30:49.814481667 UTC)] [cpuid: 1] Current cpr chip the floor_fuse=0 pvs_fuse=3 RBCPR_GCNT_TARGET(2): = 0x550
<4>[ 2.457643] [(2013-12-25 20:30:49.814508334 UTC)] [cpuid: 1] cur_volt 1250000 uV (railway_voltage: 1237500 uV)
<4>[ 2.509059] [(2013-12-25 20:30:49.865926667 UTC)] [cpuid: 1] Current cpr chip the floor_fuse=0 pvs_fuse=3 RBCPR_GCNT_TARGET(2): = 0x550
<4>[ 2.509089] [(2013-12-25 20:30:49.865953334 UTC)] [cpuid: 1] cur_volt 1237500 uV (railway_voltage: 1231250 uV)
<6>[ 2.512444] [(2013-12-25 20:30:49.869310000 UTC)] [cpuid: 0] EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: (null)
<6>[ 2.521218] [(2013-12-25 20:30:49.878085000 UTC)] [cpuid: 0] android_work: android_work: sent uevent USB_STATE=CONNECTED
<4>[ 2.533329] [(2013-12-25 20:30:49.890195001 UTC)] [cpuid: 1] mount used greatest stack depth: 5984 bytes left
<6>[ 2.549471] [(2013-12-25 20:30:49.906338334 UTC)] [cpuid: 0] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: (null)
<4>[ 2.560474] [(2013-12-25 20:30:49.917341667 UTC)] [cpuid: 1] Current cpr chip the floor_fuse=0 pvs_fuse=3 RBCPR_GCNT_TARGET(2): = 0x550
<4>[ 2.560501] [(2013-12-25 20:30:49.917365000 UTC)] [cpuid: 1] cur_volt 1231250 uV (railway_voltage: 1225000 uV)
<4>[ 2.611864] [(2013-12-25 20:30:49.968730000 UTC)] [cpuid: 1] Current cpr chip the floor_fuse=0 pvs_fuse=3 RBCPR_GCNT_TARGET(2): = 0x550
<4>[ 2.611889] [(2013-12-25 20:30:49.968753333 UTC)] [cpuid: 1] cur_volt 1225000 uV (railway_voltage: 1218750 uV)
<6>[ 2.654669] [(2013-12-25 20:30:50.011535001 UTC)] [cpuid: 0] android_usb gadget: high-speed config #1: android
<7>[ 2.656429] [(2013-12-25 20:30:50.013296667 UTC)] [cpuid: 0] BATT: msm_battery_cb_func
<7>[ 2.656474] [(2013-12-25 20:30:50.013340000 UTC)] [cpuid: 0] BATT: msm_battery_update_psy_status
<7>[ 2.656996] [(2013-12-25 20:30:50.013861667 UTC)] [cpuid: 0] BATT: received, 0, 0, 0x131; 0, 4175, 98, 200; 1, 0, 0; 0, 4184, 0
<7>[ 2.657019] [(2013-12-25 20:30:50.013883334 UTC)] [cpuid: 0] BATT: charger type changed
<7>[ 2.657038] [(2013-12-25 20:30:50.013901667 UTC)] [cpuid: 0] BATT: usb pc charger inserted
<6>[ 2.657398] [(2013-12-25 20:30:50.014263334 UTC)] [cpuid: 1] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: (null)
<7>[ 2.692358] [(2013-12-25 20:30:50.049223333 UTC)] [cpuid: 0] BATT: msm_battery_cb_func
<7>[ 2.692403] [(2013-12-25 20:30:50.049266667 UTC)] [cpuid: 0] BATT: msm_battery_update_psy_status
<7>[ 2.693016] [(2013-12-25 20:30:50.049881667 UTC)] [cpuid: 0] BATT: received, 0, 0, 0x131; 0, 4175, 98, 200; 1, 0, 0; 0, 4184, 0
<6>[ 2.712966] [(2013-12-25 20:30:50.069831667 UTC)] [cpuid: 0] android_work: android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 3.889079] [(2013-12-25 20:30:51.245946667 UTC)] [cpuid: 1] EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: (null)
callback received
<6>[ 33.789924] [(2013-12-25 20:31:21.146789997 UTC)] [cpuid: 1] rmt_storage_event_write_iovec_cb: write iovec callback received
<6>[ 34.261563] [(2013-12-25 20:31:21.618429997 UTC)] [cpuid: 2] rmt_storage_ioctl: send status ioctl
<7>[ 42.112956] [(2013-12-25 20:31:29.469821663 UTC)] [cpuid: 0] BATT: msm_battery_update_psy_status
<7>[ 42.113546] [(2013-12-25 20:31:29.470411663 UTC)] [cpuid: 0] BATT: received, 0, 0, 0x131; 0, 4184, 98, 200; 1, 0, 0; 4207, 4184, 454
<7>[ 52.132968] [(2013-12-25 20:31:39.489833328 UTC)] [cpuid: 0] BATT: msm_battery_update_psy_status
<7>[ 52.133539] [(2013-12-25 20:31:39.490403328 UTC)] [cpuid: 0] BATT: received, 0, 0, 0x131; 0, 4184, 98, 200; 1, 0, 0; 4209, 4184, 454
<4>[ 61.463588] [(2013-12-25 20:31:48.820453328 UTC)] [cpuid: 3] msm_fb_set_backlight:bl_level=0 enter1
<4>[ 61.464438] [(2013-12-25 20:31:48.821303328 UTC)] [cpuid: 3] msm_fb_blank_sub blank_mode =4
<4>[ 61.464456] [(2013-12-25 20:31:48.821321661 UTC)] [cpuid: 3] msm_fb_set_backlight:bl_level=0 enter1
<6>[ 61.464491] [(2013-12-25 20:31:48.821354994 UTC)] [cpuid: 3] mipi_dsi_ahb_ctrl: ahb clks already ON
<6>[ 61.464506] [(2013-12-25 20:31:48.821371661 UTC)] [cpuid: 3] mipi_dsi_clk_enable: mipi_dsi_clks already ON
<7>[ 61.464531] [(2013-12-25 20:31:48.821394994 UTC)] [cpuid: 3] mipi_hx8389b_lcd_off E
<7>[ 61.612951] [(2013-12-25 20:31:48.969816662 UTC)] [cpuid: 3] mipi_hx8389b_lcd_off X
<7>[ 62.152969] [(2013-12-25 20:31:49.509834995 UTC)] [cpuid: 0] BATT: msm_battery_update_psy_status
<7>[ 62.153599] [(2013-12-25 20:31:49.510464995 UTC)] [cpuid: 0] BATT: received, 0, 0, 0x131; 0, 4184, 98, 200; 1, 0, 0; 4209, 4184, 454
Click to expand...
Click to collapse
Particularly, this line :
005936] [(1970-01-01 00:00:01.013050002 UTC)] [cpuid: 1] flash_onfi_probe: No partition info available
<6>[ 1.006204] [(1970-01-01 00:00:01.013316669 UTC)] [cpuid: 1] status: 20
<6>[ 1.006241] [(1970-01-01 00:00:01.013353336 UTC)] [cpuid: 1] nandid: 20202020 maker 20 device 20
<3>[ 1.006283] [(1970-01-01 00:00:01.013393336 UTC)] [cpuid: 1] ERROR: unknown nand device manuf=20 devid=20
....
.006906] [(1970-01-01 00:00:01.014016669 UTC)] [cpuid: 1] flash_onenand_probe: Detected an unsupported device
<3>[ 1.006941] [(1970-01-01 00:00:01.014051669 UTC)] [cpuid: 1] msm_nand_probe: No nand device found
.....
.788638] [(1970-01-01 00:00:00.795750001 UTC)] [cpuid: 1] loop: module loaded
<1>[ 0.788789] [(1970-01-01 00:00:00.795900001 UTC)] [cpuid: 1] pmem: pmem_setup: unable to register pmem driver(pmem) - zero size passed in!
<4>[ 0.788846] [(1970-01-01 00:00:00.795956668 UTC)] [cpuid: 1] android_pmem: probe of android_pmem.0 failed with error -1
<1>[ 0.788929] [(1970-01-01 00:00:00.796040001 UTC)] [cpuid: 1] pmem: pmem_setup: unable to register pmem driver(pmem_adsp) - zero size passed in!
<4>[ 0.788981] [(1970-01-01 00:00:00.796091668 UTC)] [cpuid: 1] android_pmem: probe of android_pmem.1 failed with error -1
<1>[ 0.789054] [(1970-01-01 00:00:00.796165001 UTC)] [cpuid: 1] pmem: pmem_setup: unable to register pmem driver(pmem_audio) - zero size passed in!
<4>[ 0.789104] [(1970-01-01 00:00:00.796215001 UTC)] [cpuid: 1] android_pmem: probe of android_pmem.2 failed with error -1
....
Do you think it's normal ? Or at least, does not alter normal booting ?
Do "device 20" can me assimilate as mmcblk0p20 memory ?
ANY help will be highly apprecciated. i'm feel empty of solutions. :silly:
Thanks.
UP !
OK,
My nand memory looks ok, i dmesg'd and logcated everything i could with 8 level mode and really found nothing suspicious...
Due to the error (UNAUTHORIZED IMAGE) i think the problem comes from Archos :
see XDA forum showthread : 1018260
Archos Platinum 50 is gene11, but i think it's maybe same problem. (signature check)
Do the phone can know if i tried to flash w/ non official rom ? if yes, when i'm trying to flash w/ official boot recovery and rom why it doesn't work ?
I'm pretty sure my phone is not messed up, but some help could be great.. :angel:
Up !
UP !
Does anybody know about possible restrictions from Archos ? bootloader ? or kernel signature check ? tools i could use for more logs/help ?...
Story continue here :
http://forum.xda-developers.com/showthread.php?t=2588322
Does anyone tried to hack the Pioneer HUD (spx-hud01)? It runs android-2.3.4_r1. Here is a manual how to build custom kernel for it (google for "spx-hud01" sitess-pioneer.com). But I don't know how to boot from custom kernel or flash it on device.
Attached are PCB board images. Here is the booting process:
Welcome to minicom 2.5
OPTIONS: I18n
Compiled on May 2 2011, 10:05:24.
Port /dev/ttyUSB0
Press CTRL-A Z for help on special keys
AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0
CTRL-A Z for help |115200 8N1 | NOR | Minicom 2.5 | VT102 | Offline
�
U-Boot 2009.08 (Sep 27 2013 - 14:08:21)
CPU: Freescale i.MX51 family 3.0V at 600 MHz
mx51 pll1: 600MHz
mx51 pll2: 665MHz
mx51 pll3: 216MHz
ipg clock : 66500000Hz
ipg per clock : 665000000Hz
uart clock : 66500000Hz
cspi clock : 54000000Hz
axi_a clock : 166250000Hz
axi_b clock : 133000000Hz
emi_slow clock: 83125000Hz
ddr clock : 200000000Hz
esdhc clock : 216000000Hz
Board: MX51 HUD-Lite 3.0 [POR]
Boot Device: MMC
I2C: ready
DRAM: 512 MB
MMC: board_mmc_init
FSL_ESDHC: 0, FSL_ESDHC: 1
In: serial
Out: serial
Err: serial
Net: FEC0 [PRIME]
Hit any key to stop autoboot: 0
MMC read: dev # 1, block # 4096,count 5632 ...
HUDLite: eMMC H/W reset already enabled.
5632 blocks read: OK
MMC read: dev # 1, block # 12288,count 1280 ...
HUDLite: eMMC H/W reset already enabled.
1280 blocks read: OK
## Booting kernel from Legacy Image at 90800000 ...
Image Name: Linux-2.6.35.3-gee7c1ed
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2647232 Bytes = 2.5 MB
Load Address: 90008000
Entry Point: 90008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 90d00000 ...
Image Name: Android Root Filesystem
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 539447 Bytes = 526.8 kB
Load Address: 90308000
Entry Point: 90308000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Initializing cgroup subsys cpu
Linux version 2.6.35.3-gee7c1ed ([email protected]) (gcc version 4.4.0 (GCC) )3
CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: Freescale MX51 Babbage Board
Ignoring unrecognised tag 0x54410008
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 104140
Kernel command line: console=ttymxc2,115200 video=mxcdi0fb:RGB24,HUDlite1 pmem=y
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
allocated 2099200 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 410MB = 410MB total
Memory: 407104k/407104k available, 12736k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xfde00000 - 0xffe00000 ( 32 MB)
vmalloc : 0xda000000 - 0xf4000000 ( 416 MB)
lowmem : 0xc0000000 - 0xd9a00000 ( 410 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.init : 0xc0008000 - 0xc0028000 ( 128 kB)
.text : 0xc0028000 - 0xc0456000 (4280 kB)
.data : 0xc0476000 - 0xc04b20e0 ( 241 kB)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:272
MXC GPIO hardware
MXC IRQ initialized
MXC_Early serial console at MMIO 0x7000c000 (options '115200')
bootconsole [ttymxc2] enabled
Console: colour dummy device 80x30
Calibrating delay loop... 599.65 BogoMIPS (lpj=2998272)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
regulator: core version 0.5
NET: Registered protocol family 16
i.MX IRAM pool: 128 [email protected]
IRAM READY
CPU is i.MX51 Revision 3.0
Using SDMA I.API
MXC DMA API initialized
IMX usb wakeup probe
bio: create slab <bio-0> at 0
regulator: VSD: 3150 mV
SCSI subsystem initialized
CSPI: mxc_spi-0 probed
Freescale USB OTG Driver loaded, $Revision: 1.55 $
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
Advanced Linux Sound Architecture Driver Version 1.0.23.
Switching to clocksource mxc_timer1
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 524K
LPMode driver module loaded
Static Power Management for Freescale i.MX5
PM driver module loaded
sdram autogating driver module loaded
Bus freq driver module loaded
DI0 is primary
mxc_dvfs_core_probe
mxc_dvfs_core_probe: failed to get gp regulator
DVFS driver module loaded
i.MXC CPU frequency driver
mxc_cpufreq_driver_init: failed to get gp regulator
ashmem: initialized
JFFS2 version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc.
msgmni has been set to 796
alg: No test for stdrng (krng)
cryptodev: driver loaded.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
regulator: get() with no identifier
mxc_ipu mxc_ipu: Channel already disabled 9
mxc_ipu mxc_ipu: Channel already uninitialized 9
mxc_ipu mxc_ipu: Channel already disabled 7
mxc_ipu mxc_ipu: Channel already uninitialized 7
mxc_ipu mxc_ipu: Channel already disabled 10
mxc_ipu mxc_ipu: Channel already uninitialized 10
Serial: MXC Internal UART driver
mxcintuart.0: ttymxc0 at MMIO 0x73fbc000 (irq = 31) is a Freescale i.MX
mxcintuart.1: ttymxc1 at MMIO 0x73fc0000 (irq = 32) is a Freescale i.MX
mxcintuart.2: ttymxc2 at MMIO 0x7000c000 (irq = 33) is a Freescale i.MX
console [ttymxc2] enabled, bootconsole disabled
console [ttymxc2] enabled, bootconsole disabled
loop: module loaded
pmem_adsp: 0 init
pmem_gpu: 1 init
m25p80 spi1.1: mx25l3205d (4096 Kbytes)
Creating 4 MTD partitions on "m25p80":
0x000000000000-0x000000070000 : "bootloader"
0x000000070000-0x000000240000 : "kernel"
0x000000240000-0x0000003f0000 : "backupdata"
0x0000003f0000-0x000000400000 : "identifier"
FEC Ethernet Driver
fec_enet_mii_bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 18, io base 0x73f80000
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ARC USBOTG Device Controller driver (1 August 2005)
g_serial gadget: Gadget Serial v2.4
g_serial gadget: g_serial ready
fsl-usb2-udc: bind to driver g_serial
mice: could not register psaux device, error: -16
mice: PS/2 mouse device common for all mice
MXC keypad loaded
using rtc device, mxc_rtc, for alarms
mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0
i2c /dev entries driver
APM Battery Driver
MXC WatchDog Driver 2.0
MXC Watchdog # 0 Timer: initial timeout 60 sec
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
VPU initialized
gpu mmu enabled
mxsdhci: MXC Secure Digital Host Controller Interface driver
mxsdhci: MXC SDHCI Controller Driver.
mmc0: SDHCI detect irq 0 irq 1 INTERNAL DMA
mxsdhci: MXC SDHCI Controller Driver.
mmc1: SDHCI detect irq 228 irq 4 INTERNAL DMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
mxc_spdif mxc_spdif.0: MXC SPDIF Audio Transmitter
No device for codec mxc spdif
No device for DAI mxc spdif
No device for DAI imx-spdif-dai
DMA Sound Buffer Allocated: Playback UseIram=1 ext_ram=0 buf->addr=1ffe2000 buf6
asoc: mxc spdif <-> imx-spdif-dai mapping ok
ALSA device list:
#0: imx-3stack-spdif (mxc spdif)
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
mxc_rtc mxc_rtc.0: setting system clock to 2013-01-01 00:00:00 UTC (1356998400)
Freeing init memory: 128K
mmc0: new high speed MMC card at address 0001
mmcblk0: mmc0:0001 HYNIX 3.60 GiB
mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 > p4
EXT4-fs (mmcblk0p1): Ignoring delalloc option - requested data journaling mode
EXT4-fs (mmcblk0p1): recovery complete
EXT4-fs (mmcblk0p1): mounted filesystem with journalled data mode. Opts: data=jl
EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): re-mounted. Opts: (null)
/bin/hud_e2fsck -y /dev/block/mmcblk0p5 -> result'0'
EXT4-fs (mmcblk0p5): Ignoring delalloc option - requested data journaling mode
EXT4-fs (mmcblk0p5): mounted filesystem with journalled data mode. Opts: data=jl
EXT4-fs (mmcblk0p6): recovery complete
EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p2): recovery complete
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p9): recovery complete
EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p8): recovery complete
EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
system_data_archiver: start
system_data_archiver: extracted.
localhost login: warning: `zygote' uses 32-bit capabilities (legacy support in )
request_suspend_state: on (3->0) at 10496332002 (2013-01-01 00:00:09.722314750 )
request_suspend_state: on (0->0) at 10577726752 (2013-01-01 00:00:09.803708875 )
pmem: request for physical address of pmem region from process 1096.
system_data_archiver: end
usb wakeup is here
otg host Remote wakeup
usb wakeup is here
otg host Remote wakeup
usb 1-1: new full speed USB device using fsl-ehci and address 2
usb 1-1: not running at top speed; connect to a high speed hub
usb 1-1: device v0421 p0661 is not supported
localhost login:
localhost login: usb 1-1: USB disconnect, address 2
Anyone?
To decrypt the firmware remove first 1648 bytes in pioneer-hud-2014-510100.bin then run:
Code:
openssl enc -d -aes-128-cbc -pass pass:pioneerhudlite < pioneer-hud-2014-510100.bin > firmware.zip
Inside firmware:
HUDLite_System_Controller.bin
HUDLite_System_Controller.md5
system.img
system.md5
u-boot.bin
u-boot.md5
uImage
uImage.md5
uramdisk.img
uramdisk.md5
To switch the HUD in device mode open the black box (the one with the USB port). Disconnect the 2nd Pin. This pin corresponds to OTG Sense ID.
Tablet info:
Manufacturer: Vivax
Model: TPC-804 3G
Cards: No Sim and No SD Card installed
CPU: MT8321A
Board QR Sticker: 0600-MW86Q9-00R|180113|00827
Board Sticker 2:
K706H (LZ)
SN: JY171212000238
K706.N0.V10.8.RC-V04.B128H.Low--8(chinese characters)
System: Android 7.0/7.1 Stock (never modified, unrooted)
I did factory reset and after factory reset most of the apps started popping up "Has stopped working..." while in wizard for first setup after factory reset. Then after i logged into google account i just wanted to format sd card and when i pulled from top of the screen to bottom to see notifications the tablet just froze. Now it wont boot, stuck at logo while kernel is loading. Recovery does not work also(perhaps cuz of kernel not booting?). Only fastboot mode works but bootloader is locked(OEM unlock not checked in andorid) and i cannot unlock it. I also dont have original rom and cannot find it.
Kernel log seems okay but then the kernel gets stuck in some kind of loop and wdt kicks every few seconds. Here is example:
Code:
[ 209.689518] <2>.(2)[151:wdtk-2][WDK]: kick Ex WDT,RT[209689509961]
[ 213.479513] <2>.(2)[116:hang_detect][Hang_Detect] hang_detect disabled.
[ 213.516845] <2>.(2)[146:bat_thread_kthr][BAT_thread]Cable out
[ 213.519550] <0>-(0)[0:swapper/0][Power/swap]CNT(dpidle,rgidle): [0] = (0,42698), [1] = (0,5026), [2] = (0,33479), [3] = (0,154),
[ 213.521005] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_cnt: [by_cpu] = 10737, [by_clk] = 0, [by_tmr] = 0, [by_oth] = 0, [by_vtg] = 0,
[ 213.522536] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_mask: 0x00000000, 0x00000000, 0x00000000, 0x00000011, 0x00000010, 0x00000010, 0x00000c03, 0x0000000c, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
[ 213.527588] <2>.(2)[146:bat_thread_kthr]AvgVbat=(3834,3795),AvgI=(0,0),VChr=198,AvgT=(25,25),SOC=(94,94),UI_SOC=95,ZCV=3992,CHR_Type=0 bcct:0:0 I:7000 Ibat:-3301
[ 213.529388] <2>.(2)[146:bat_thread_kthr][Sync_Real] UI_SOC=95, SOC=94, counter = 4
[ 213.530351] <2>.(2)[146:bat_thread_kthr]UI_SOC=(95), resetBatteryMeter=(0)
[ 213.531208] <2>-(2)[146:bat_thread_kthr]mtk_rtc_hal_common: rtc_spare_reg[0] = {32796, 127, 8}
[ 216.119554] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
[ 218.530352] <0>-(0)[0:swapper/0][Power/swap]CNT(soidle,rgidle): [0] = (0,43697), [1] = (0,5026), [2] = (0,34247), [3] = (0,154),
[ 218.531808] <0>-(0)[0:swapper/0][Power/swap]soidle_block_cnt: [by_cpu] = 5522, [by_clk] = 0, [by_tmr] = 0, [by_oth] = 0, [by_vtg] = 0,
[ 218.533327] <0>-(0)[0:swapper/0][Power/swap]soidle_block_mask: 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
[ 223.516871] <2>.(2)[146:bat_thread_kthr][BAT_thread]Cable out
[ 223.527603] <2>.(2)[146:bat_thread_kthr]AvgVbat=(3831,3792),AvgI=(0,0),VChr=198,AvgT=(25,25),SOC=(94,94),UI_SOC=95,ZCV=3992,CHR_Type=0 bcct:0:0 I:7000 Ibat:-3219
[ 223.529404] <2>.(2)[146:bat_thread_kthr][Sync_Real] UI_SOC=95, SOC=94, counter = 5
[ 223.530366] <2>.(2)[146:bat_thread_kthr]UI_SOC=(95), resetBatteryMeter=(0)
[ 223.531223] <2>-(2)[146:bat_thread_kthr]mtk_rtc_hal_common: rtc_spare_reg[0] = {32796, 127, 8}
[ 226.127537] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
[ 229.699519] <2>.(2)[151:wdtk-2][WDK]: kick Ex WDT,RT[229699511085]
[ 233.516903] <2>.(2)[146:bat_thread_kthr][BAT_thread]Cable out
[ 233.529656] <2>.(2)[146:bat_thread_kthr]AvgVbat=(3829,3790),AvgI=(0,0),VChr=198,AvgT=(25,25),SOC=(94,94),UI_SOC=95,ZCV=3992,CHR_Type=0 bcct:0:0 I:7000 Ibat:-3246
[ 233.531457] <2>.(2)[146:bat_thread_kthr][Sync_Real] UI_SOC=95, SOC=94, counter = 6
[ 233.532397] <2>.(2)[146:bat_thread_kthr]UI_SOC=(95), resetBatteryMeter=(0)
[ 233.533258] <2>-(2)[146:bat_thread_kthr]mtk_rtc_hal_common: rtc_spare_reg[0] = {32796, 127, 8}
[ 236.134380] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
[ 243.489509] <2>.(2)[116:hang_detect][Hang_Detect] hang_detect disabled.
[ 243.516925] <2>.(2)[146:bat_thread_kthr][BAT_thread]Cable out
[ 243.529674] <2>.(2)[146:bat_thread_kthr]AvgVbat=(3827,3787),AvgI=(0,0),VChr=198,AvgT=(25,25),SOC=(93,93),UI_SOC=95,ZCV=3992,CHR_Type=0 bcct:0:0 I:7000 Ibat:-3287
[ 243.530711] <2>-(0)[0:swapper/0][Power/swap]CNT(dpidle,rgidle): [0] = (0,47909), [1] = (0,5026), [2] = (0,38968), [3] = (0,154),
[ 243.530721] <2>-(0)[0:swapper/0][Power/swap]dpidle_block_cnt: [by_cpu] = 10697, [by_clk] = 0, [by_tmr] = 0, [by_oth] = 0, [by_vtg] = 0,
[ 243.530732] <2>-(0)[0:swapper/0][Power/swap]dpidle_block_mask: 0x00000000, 0x00000000, 0x00000000, 0x00000011, 0x00000010, 0x00000010, 0x00000c03, 0x0000000c, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
[ 243.536757] <2>.(2)[146:bat_thread_kthr][Sync_Real] UI_SOC=94, SOC=93, counter = 0
[ 243.537697] <2>.(2)[146:bat_thread_kthr]UI_SOC=(94), resetBatteryMeter=(0)
[ 243.538559] <2>-(2)[146:bat_thread_kthr]mtk_rtc_hal_common: rtc_spare_reg[0] = {32796, 127, 8}
[ 246.141177] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
[ 248.542132] <0>-(0)[0:swapper/0][Power/swap]CNT(soidle,rgidle): [0] = (0,48767), [1] = (0,5026), [2] = (0,39917), [3] = (0,154),
[ 248.543589] <0>-(0)[0:swapper/0][Power/swap]soidle_block_cnt: [by_cpu] = 5070, [by_clk] = 0, [by_tmr] = 0, [by_oth] = 0, [by_vtg] = 0,
[ 248.545109] <0>-(0)[0:swapper/0][Power/swap]soidle_block_mask: 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
[ 249.709513] <2>.(2)[151:wdtk-2][WDK]: kick Ex WDT,RT[249709504902]
[ 253.516957] <2>.(2)[146:bat_thread_kthr][BAT_thread]Cable out
[ 253.527682] <2>.(2)[146:bat_thread_kthr]AvgVbat=(3824,3784),AvgI=(0,0),VChr=198,AvgT=(25,25),SOC=(93,93),UI_SOC=94,ZCV=3992,CHR_Type=0 bcct:0:0 I:7000 Ibat:-3309
[ 253.529511] <2>.(2)[146:bat_thread_kthr][Sync_Real] UI_SOC=94, SOC=93, counter = 1
[ 253.530451] <2>.(2)[146:bat_thread_kthr]UI_SOC=(94), resetBatteryMeter=(0)
[ 253.531311] <2>-(2)[146:bat_thread_kthr]mtk_rtc_hal_common: rtc_spare_reg[0] = {32796, 127, 8}
[ 256.147945] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
[ 263.516979] <2>.(2)[146:bat_thread_kthr][BAT_thread]Cable out
[ 263.527102] <2>.(2)[146:bat_thread_kthr]AvgVbat=(3821,3781),AvgI=(0,0),VChr=198,AvgT=(25,25),SOC=(93,93),UI_SOC=94,ZCV=3992,CHR_Type=0 bcct:0:0 I:7000 Ibat:-3352
[ 263.528903] <2>.(2)[146:bat_thread_kthr][Sync_Real] UI_SOC=94, SOC=93, counter = 2
[ 263.529865] <2>.(2)[146:bat_thread_kthr]UI_SOC=(94), resetBatteryMeter=(0)
[ 263.530722] <2>-(2)[146:bat_thread_kthr]mtk_rtc_hal_common: rtc_spare_reg[0] = {32796, 127, 8}
[ 266.151446] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
Any hope of fixing this? This tablet is really important to me, not because of data on it just...