Hello guys, I have a P20 Lite with the bootloader unlocked and the latest version of emui 9. I want to install an Android 12 or 13 custom rom, Can you help me linking full and working guides or help me step by step?
It's the same as with TWRP - the higher the number, the better .
-Alf- said:
It's the same as with TWRP - the higher the number, the better .
Click to expand...
Click to collapse
I followed this tutorial:
but when I reboot from TWRP, it shows up the menu with 3 options and then reboot into TWRP
teodenetto said:
I followed this tutorial:
but when I reboot from TWRP, it shows up the menu with 3 options and then reboot into TWRP
Click to expand...
Click to collapse
it's a classic GSI ROM, flash it simply in fastboot (you need clean stock ROM):
Guide
or
Guide 2
Related
I was on CyanogenMod (I guess 13) and wanted to move to JDC rom. I did some flashing and then eventually my phone was fully stuck and booting over and over again. I followed the guide to unbrick it and this went successfully. What steps to follow now? I've found tons of guides which all use different versions of TWRP and OOS but I'm not sure what way I should go.... any help?
p!rate said:
I was on CyanogenMod (I guess 13) and wanted to move to JDC rom. I did some flashing and then eventually my phone was fully stuck and booting over and over again. I followed the guide to unbrick it and this went successfully. What steps to follow now? I've found tons of guides which all use different versions of TWRP and OOS but I'm not sure what way I should go.... any help?
Click to expand...
Click to collapse
The problem was your bootloader. I'm writing this guide assuming that you're running a marshmallow OS.
1. Follow this guide to update your bootloader: https://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
2. Download and flash the latest TWRP recovery found here: https://dl.twrp.me/onyx/
3. Flash the JDC ROM normally as you would've before.
aryan.arora180 said:
The problem was your bootloader. I'm writing this guide assuming that you're running a marshmallow OS.
1. Follow this guide to update your bootloader: https://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
2. Download and flash the latest TWRP recovery found here: https://dl.twrp.me/onyx/
3. Flash the JDC ROM normally as you would've before.
Click to expand...
Click to collapse
Thanks for your quick reply. Currently I am not on a custom recovery yet because I'm not sure on the first step. Can I just follow the guide from step 1 without custom recovery or do I need to flash something for that first? Currently I'm on Oxygen OS 2.1 and my bootloader is unlocked.
Also, do I flash the bootloader twice in a row (first from step 1 in the guide and then again in step 2) or should I flash the latest directly?
edit: Would installing OOS3 from a zip and then installing latest TWRP be easier for me maybe even though it will take longer?
p!rate said:
Thanks for your quick reply. Currently I am not on a custom recovery yet because I'm not sure on the first step. Can I just follow the guide from step 1 without custom recovery or do I need to flash something for that first? Currently I'm on Oxygen OS 2.1 and my bootloader is unlocked.
Also, do I flash the bootloader twice in a row (first from step 1 in the guide and then again in step 2) or should I flash the latest directly?
edit: Would installing OOS3 from a zip and then installing latest TWRP be easier for me maybe even though it will take longer?
Click to expand...
Click to collapse
You can't use the stock recovery to flash the bootloader zip.
Installing OxygenOS 3 would be much easier for you but would take time(the download of OOS). If you decide to do so then:
1. Update OOS to 3.x.x, you'll get the newer bootloader so you won't have to flash the bootloader zip.
2. Flash the latest TWRP Recovery.
3. Normally flash the JDC ROM as you would've before.
If you don't wanna download OOS3, then follow these steps:
1. Flash the latest TWRP Recovery.
2. Then flash the bootloader zip ( https://drive.google.com/file/d/0B9KbfmnSD_ryeU9KRnlyYW1iZm8/view )
3. Normally flash the JDC ROM as you would've before.
It worked, thanks a lot for clearing this up!
p!rate said:
It worked, thanks a lot for clearing this up!
Click to expand...
Click to collapse
My pleasure mate!
System Configuration:
ROM: MIUI Global 8.1.25 | Beta
Kernel: 3.10.84-perf-g1cb6922
RAM: 2.00 GB
Device: Redmi note 3 (kenzo) with officially unlocked bootloader.
There are a number of tutorials and posts on XDA and YouTube with varying content. Some of them do not flash the boot.img, some of them do.
I will be using Ubuntu to flash using adb and fastboot. Any suggestions regarding that would be great.
Here are the steps I think I should follow ( from the posts I read):
1. Boot into fastboot.
2. Flash twrp-**.img
3. Boot into TWRP recovery.
4. Flash SuperSU
5. Flash Lazyflasher
Would that sequence cause any problem?
No problem, just flash twrp without prior boot.img flashing.
NealSchwartz said:
System Configuration:
ROM: MIUI Global 8.1.25 | Beta
Kernel: 3.10.84-perf-g1cb6922
RAM: 2.00 GB
Device: Redmi note 3 (kenzo) with officially unlocked bootloader.
There are a number of tutorials and posts on XDA and YouTube with varying content. Some of them do not flash the boot.img, some of them do.
I will be using Ubuntu to flash using adb and fastboot. Any suggestions regarding that would be great.
Here are the steps I think I should follow ( from the posts I read):
1. Boot into fastboot.
2. Flash twrp-**.img
3. Boot into TWRP recovery.
4. Flash SuperSU
5. Flash Lazyflasher
Would that sequence cause any problem?
Click to expand...
Click to collapse
yes the steps you're mentioned above is correct, you don't have to flash boot.img. just do the steps above.
Zasnizas said:
yes the steps you're mentioned above is correct, you don't have to flash boot.img. just do the steps above.
Click to expand...
Click to collapse
Thank you, bud! I have successfully install TWRP and also installed RR Rom on my Redmi Note 3. However, I have now lost root access.
I tried flashing the SuperSU.zip again, but to no avail. Where did I go wrong? How can I get root access back?
mistake37 said:
No problem, just flash twrp without prior boot.img flashing.
Click to expand...
Click to collapse
Thanks! Worked like charm. But I now lost root after installing RR custom Rom.
hey
I'm glad it worked, would you be so kind to post the links for those files you mentioned?
Also I'm on the latest stable Miui 9(snapdragon), will it work for me?
NealSchwartz said:
Thank you, bud! I have successfully install TWRP and also installed RR Rom on my Redmi Note 3. However, I have now lost root access.
I tried flashing the SuperSU.zip again, but to no avail. Where did I go wrong? How can I get root access back?
Click to expand...
Click to collapse
I recommend you to use magisk as a root access. To be safe you need to make clean flash your rom again , who's know maybe superSu already exists in your system but not appear on apps drawer by doing this your device will be cleaned from anything that can cause you into bootloop. First download magisk and magisk manager and place it in phone memory or SD card it's up to you and then reboot to TWRP ,wipe everything cache , dalvik cache , system and data then flash rom , gapps and magisk.. reboot. Search for magisk at XDA and download it.
Karanfil said:
I'm glad it worked, would you be so kind to post the links for those files you mentioned?
Also I'm on the latest stable Miui 9(snapdragon), will it work for me?
Click to expand...
Click to collapse
TWRP: Go to official website and download latest version
SuperSU: https://androidfilehost.com/?fid=385035244224394155
lazy-flasher: https://androidfilehost.com/?fid=457095661767111293
I am not sure if it would work, but I was also on MIUI 9 and it worked for me. Hopefully, someone else here will be able to let you know. AFAIK, it should work.
Zasnizas said:
I recommend you to use magisk as a root access. To be safe you need to make clean flash your rom again , who's know maybe superSu already exists in your system but not appear on apps drawer by doing this your device will be cleaned from anything that can cause you into bootloop. First download magisk and magisk manager and place it in phone memory or SD card it's up to you and then reboot to TWRP ,wipe everything cache , dalvik cache , system and data then flash rom , gapps and magisk.. reboot. Search for magisk at XDA and download it.
Click to expand...
Click to collapse
Thank you so much! It worked. I followed the steps, did a clean install and this time opted for Magisk. Awesome!
NealSchwartz said:
Thank you so much! It worked. I followed the steps, did a clean install and this time opted for Magisk. Awesome!
Click to expand...
Click to collapse
awesome.. glad it worked for you :good:
I'm on MIUI 10 Global Beta 8.8.16.
Huz416 said:
I'm on MIUI 10 Global Beta 8.8.16.
Click to expand...
Click to collapse
Just flash any custom recovery , I will suggest orange fox . Then , flash magisk use modules like YouTube vanced , face unlock etc .
aikhhk8 said:
Just flash any custom recovery , I will suggest orange fox . Then , flash magisk use modules like YouTube vanced , face unlock etc .
Click to expand...
Click to collapse
How do I install twrp? I don't want to brick my device.
Huz416 said:
How do I install twrp? I don't want to brick my device.
Click to expand...
Click to collapse
Install adb and fastboot drivers .
Download orange fox recovery (place it on desktop ) https://drive.google.com/file/d/14pEu6xx0eg14uGbsf9tXCdu8LVz4z7iP/view?usp=drivesdk
Open CMD and enter into fastboot mode
In CMD type - fastboot flash recovery filelocation
For making it easy instead of putting file location , just drag the recovery file into CMD it will automatically write location .
Now simply boot into recovery by pressing volume up+ power or type fastboot boot filelocation .
Just do everything as mentioned there will be no problem , make nandroid backup asap .
What is Magisk? Thank you for the help. I'll be sure to post again if I encounter any problems.
What is a Nandroid backup?
Huz416 said:
What is a Nandroid backup?
Click to expand...
Click to collapse
It's a backup of your system
Before flashing anything in the custom.recovery, I recommend making a fully working ROM backup,
So you'll need to click backup in the recovery and tick
BOOT
DATA
SYSTEM
also, make a SEPARATE backup of the EFS this is very important.
Huz416 said:
What is Magisk? Thank you for the help. I'll be sure to post again if I encounter any problems.
Click to expand...
Click to collapse
Just an advise.
I think you should not try any of this mods before you study deeply the effects and the risks of it. You are so newbie that you can brick your device if you make any mistake performing the operations.
I have a Redmi note 5 AI 6/64 gb variant. After purchasing my device i have unlockd the bootloader and flash global stable rom but i can't relock the bootloader. my previous rom was MIUI 9.5.21.0 China and my current rom is MIUI 9.5.17.0. If i relock the bootloader phone boot into recovery mode and shows "This MIUI version can't be installed on this device". If i unlocked the bootloader again then phone reboot into OS. As per my findings from MIUI 9.5.6.0 bootloader can't be locked after flashing global rom on Chinese device. Its a bug from xiaomi. So my question is
1. If i flash my device into 9.2.7.0 can i relock my bootloader again and can perform OTA update?
2. I have got an OTA update MIUI 9.6.3.0. If i update my device will it get bricked? If i can update my device via OTA update will it relock my bootloader automatically? Or do I have to flash it manually?
i have rooted my device miui 10 with TWRP recovery, my device downloaded miui 11 (belekota) and wait to install
can i install new update 11 or will stuck in problem and lost all my app's and data ??
I updated mine...all data remained .....lost root though
fmkingpin said:
I updated mine...all data remained .....lost root though
Click to expand...
Click to collapse
what about TWRP recovery, did it back again to stock recovery or with the same TWRP recovery ??
Reverted to stock recovery.
fmkingpin said:
Reverted to stock recovery.
Click to expand...
Click to collapse
ok, i will try, i hope not found problem
thanks
zeko_1992 said:
ok, i will try, i hope not found problem
thanks
Click to expand...
Click to collapse
Only problem I found is that I can't install back a tarp recovery.....if u get through rotting after update please share...
fmkingpin said:
Only problem I found is that I can't install back a tarp recovery.....if u get through rotting after update please share...
Click to expand...
Click to collapse
i didn't found root and twrp for the new update
i'm still using miui 10 because i need root and twrp recovery
i hope miui 11 rooted :crying:
fmkingpin said:
Only problem I found is that I can't install back a tarp recovery.....if u get through rotting after update please share...
Click to expand...
Click to collapse
did you tried root again after update ?? success or fail ??
zeko_1992 said:
did you tried root again after update ?? success or fail ??
Click to expand...
Click to collapse
Fail.
fmkingpin said:
Fail.
Click to expand...
Click to collapse
hmmm... my device updated itself without my permission :crying:
i lost my root and twrp, i'm stuck with useless stupid update
tried searching in internet about root for new update and twrp but nothing for now
i think we will wait weeks or months to see new updates for root and twrp
if i found anything new, i will post here and mention you :good:
Guys
Download Miui update in zip file and flash via recovery.
It doesn't revert to stock recovery and keeps your twrp along with root intact.
zeko_1992 said:
i didn't found root and twrp for the new update
i'm still using miui 10 because i need root and twrp recovery
i hope miui 11 rooted :crying:
Click to expand...
Click to collapse
I've successfully rooted my miui 10 by this method
https://forum.xda-developers.com/redmi-note-4/how-to/guide-root-using-magisk-stock-recovery-t3718203
And i've installed miui 11 now, somehow.. latest magisk (v20.1) can't root my device with the same method. So i tried to root with magisk v2.0 (same i did in miui 10) and its work
swapyworld said:
Guys
Download Miui update in zip file and flash via recovery.
It doesn't revert to stock recovery and keeps your twrp along with root intact.
Click to expand...
Click to collapse
bucks_26 said:
I've successfully rooted my miui 10 by this method
https://forum.xda-developers.com/redmi-note-4/how-to/guide-root-using-magisk-stock-recovery-t3718203
And i've installed miui 11 now, somehow.. latest magisk (v20.1) can't root my device with the same method. So i tried to root with magisk v2.0 (same i did in miui 10) and its work
Click to expand...
Click to collapse
thanks for help guys, the problem now how to downgrade ???
zeko_1992 said:
thanks for help guys, the problem now how to downgrade ???
Click to expand...
Click to collapse
Hope you have backed up system, boot and vendor partition.
Wipe system, dalvik, cache, vendor partition and restore backup.
swapyworld said:
Hope you have backed up system, boot and vendor partition.
Wipe system, dalvik, cache, vendor partition and restore backup.
Click to expand...
Click to collapse
i don't have custom recovery, my device back to stock recovery
i tried downgrade with mi flash and step by step from websites but error, tried flash from recovery but it changed, there are 3 options
- restart
- wipe data
- contact mi assistant
no option install update.zip, also from device and check software update, no option to choose install update
everything changed, stupid update, i don't feel any good change
i think developer will take long time to root new update and use custom recovery
no downgrade work, no one try
zeko_1992 said:
i don't have custom recovery, my device back to stock recovery
i tried downgrade with mi flash and step by step from websites but error, tried flash from recovery but it changed, there are 3 options
- restart
- wipe data
- contact mi assistant
no option install update.zip, also from device and check software update, no option to choose install update
everything changed, stupid update, i don't feel any good change
i think developer will take long time to root new update and use custom recovery
no downgrade work, no one try
Click to expand...
Click to collapse
Why don't you try installing recovery using fastboot method and then flash magisk 20.1 zip through recovery.
Please check if bootloader is still unlocked before trying this.
swapyworld said:
Why don't you try installing recovery using fastboot method and then flash magisk 20.1 zip through recovery.
Please check if bootloader is still unlocked before trying this.
Click to expand...
Click to collapse
i tried using fastboot (mi flash tool) but error, tried another step in same app but show error
the new update changed everything, no one can downgrade from 11 to 10, i don't know why ??
from 10 to 8 you can downgrade without any problem, 11 you can't do anything
solved
finally i made it and back again to miui 10
best program for use xiaomitool
flash anything with 2-3 steps
bucks_26 said:
I've successfully rooted my miui 10 by this method
https://forum.xda-developers.com/redmi-note-4/how-to/guide-root-using-magisk-stock-recovery-t3718203
And i've installed miui 11 now, somehow.. latest magisk (v20.1) can't root my device with the same method. So i tried to root with magisk v2.0 (same i did in miui 10) and its work
Click to expand...
Click to collapse
thanks for highlighting issues with Magisk 20.1!
I used 20.0 and everything works
Any one using using gcam on miui 11?
Hi guys,
Really frustrated with this right now. I'm just trying to flash Havoc 3.6 without root on Redmi 8A Global version.
I have OrangeFox 10.1 installed from the official OrangeFox website.
I start off with MIUI 11.06 Global.
I unlock bootloader, reboot into OrangeFox fine.
If I format data and flash the rom, I get stuck on the Redmi by Xiaomi screen that says Unlocked.
If I don't format data before flashing ROM, I get bootlooped into OrangeFox recovery.
I can restore functionality by reflashing Global ROM.
I'm using ROM Havoc-OS-v3.6-20200613-Official-a64-ab.img.xz which I extracted into SD card and flashed .img to System partition.
https://sourceforge.net/projects/ha...v3.6-20200613-Official-a64-ab.img.xz/download
Please help!
Follow this: https://forum.xda-developers.com/xi...uide-how-to-havoc-os-3-1-gsi-running-t4050835
kouseralamin said:
Follow this: https://forum.xda-developers.com/xi...uide-how-to-havoc-os-3-1-gsi-running-t4050835
Click to expand...
Click to collapse
I've tried to follow that but it has many things I don't need like magisk. I just want a regular rom.
Also, OP is using a China version of the device instead of global variant.
justj0sh said:
I've tried to follow that but it has many things I don't need like magisk. I just want a regular rom.
Also, OP is using a China version of the device instead of global variant.
Click to expand...
Click to collapse
Just do not install magisk and it does not matter whether it is China version or global version.
NOTE: If you flash vbmeta you would not get bootloop.
kouseralamin said:
Just do not install magisk and it does not matter whether it is China version or global version.
NOTE: If you flash vbmeta you would not get bootloop.
Click to expand...
Click to collapse
I did flash vbmeta.
Anyway I found the solution after another 3 hours of looking around. The guide I was using missed many important steps. I needed to flash permissive and certificate patch.