Good morning everyone! Greetings from Brazil.
I have a Positivo YPY L1050 tablet that uses the rockchip rk3066 processor. It has Android 4.3.1 Jelly Ben and has been idle for some time. Its performance has never been good. It is very slow and now it doesn't update anymore. I already had old Samsung tablets and there's always a custom rom to revive them, but this manufacturer Positivo (from Brazil) never released a more updated rom. Below are its specifications.
My doubts: 1) Are there roms of other stablets with the same hardware for me to try to upgrade to a higher Android?
3) If not, is there any other system I can install on it, such as Ubuntu Touch, Lineage OS, Linux distributions etc?
3) Are there any patches I can apply that will improve its performance?
4) Is there any other use I can make?
5) Or I don't even waste time with it and try to sell it very cheap to someone, if I can.
Review (in Portuguese BR):
Teste do Tablet Positivo Ypy L1050
Analisamos o novo tablet da Positivo Informática, o Ypy L1050. Ele tem tela de 10,1 polegadas, processador de dois núcleos e 1,5 GHz, 1 GiB de RAM e armazenamento de 16 GiB, e roda o sistema operacional Android 4.1. Confira!
www.clubedohardware.com.br
FabricantePositivoModeloPositivo Ypy L1050MarcapositivoResolução1232x800Plataformark30boardAndroid4.1.1API16KernelLinux version 3.0.8+ ([email protected]) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Wed Sep 25 13:37:40 BRT 2013Touchscreengt9-tsAccelerometerKXTI9Als/psal3010 (i2c 4-001c)Cameragc2035 (i2c 3-003c)
gc0329 (i2c 3-0031)Chargeroz8806 (i2c 1-002f)PMICtps65910 (i2c 1-002d)Audiort3261 (i2c 0-001c)Wi-FiRK903SoundRK29RT3261RAM1 GBFlash size256 GB
SOC
CPURK30boardVendorRockchipCores2FamilyCortex-A9Mode32-bitMachineARMv7 Processor rev 0 (v7l)ABIarmeabi-v7aInstructionsswp half thumb fastmult vfp edsp neon vfpv3Revisionr3p0Clock speed252 - 1512 MHzGovernorinteractiveGPUMali-400 MPVendorARMOpenGL ES2.0 r3p2-01rel0Clock speed50 - 400 MHz
sorry for my English.
Related
Hi pals, I´m From Mexico and I have a tablet called SuperPAD 10" with android 2.3.3, but when I used the first time it´s freezed and try to shutdown 2 or 3 times, battery goes down in 30 mins. Late works fine but I want to known if this tablet can be upgraded to android 3 or 4 ICS because it´s slow with some apps.
I googled many times to find a way to upgrade but no had success to find it.
And many often times touchpad screen freeze or not responding until shutdown the tablet.
Anyone have a tablet like this or have an idea to upgrade?. Please some help about this!!!
P.D. Excuse my English, i´m out of practice.
The exact model of this tablet was provided by Quick system info probtw, if i want it by system config and says no model number)
Dispositivo: dk1032c (Hardware)
Modelo: dk1032c (Model)
Board: Unknown
Producto: dk1032c (Product)
Marca: Infotmic (Brand)
Fabricante: Infotmic
CPU+ABI: armeabi
Bootloader: unknown
Radio: unknown
Hardware: imapx200
Release: 2.3.3
SDK: 10
Type: User
Build: GRI40
Locale: es_US
Info about this phone (internal menu option)
Numero de modelo (model number)
(null)
Version de Android (Android version)
2.3.6
Version de banda de base(BaseBand version)
desconocido (unknown)
Version nucleo (Kernel version)
2.6.35.7-infoTM
[email protected] #130
Numero de compilacion( kernel compilation version)
m1032c-eng 2.3.6.1 eng.infotm.20120627
Good evening, we ask aid for model clone of Note 2 I7100 Alps, the problem I think is the GPU and powervx gsx531 and when I do the test with antutu known that in the test 2d and 3d stutters.
Numero modello
I7100
Versione di Android
4.1.1
Versione banda di base
MAUI.11AMD.W12.22.SP.V15, 2012/10/08 20:09
Versione kernel
3.4.0
[email protected]) )
#1 SMP PREEMPT Wed Nov 21 10:09:20 CST 2012
Numero build
E1901_v77_hy1b_mt9p017_notv_20121121
Someone ROM updates or modified
When you say stutters, is it due to low frame rate or does the test cause the phone to malfunction at that point?
Either way I suggest you make backup of your ROM and do a factory reset.
Read this thread for more info http://forum.xda-developers.com/showthread.php?t=1923764
Sent from my I7100 using xda app-developers app
Good morning, I apologize for my bad English, I hope to be in the right section, so my tablet 8 inch Allwinner A13 - Cortex - A8 1.2 GHz after intallation to the root did not give me
plus the ability to install anything because I said that internal storage was exhausted.
I installed the latest firmware and different 'the star mimo8 everything ok except that the touchscreen and' not calibrated bad.
Q'ualcuno knows where to find the original firmware?. Roma or similar
I enclose features 8 "Tablet PC - Wi-Fi Operating System ANDROID 4.0
shelf
Allwinner A13 - Cortex - A8 1.2 GHz
Dimensioni e peso
200 x 155 x 10 mm / 360 gr
Display
8” 4:3 800 x 600 Pixel, Touch Screen Capacitivo
Fotocamere
Frontale 0.3 Mpx – Posteriore 2.0 Mpx
WI-FI
IEEE 802.11 b/g
Supporto 3G
Chiavetta 3G Internet esterna (non in dotazione) via OTG
Memoria interna
512 Mb DDR + 4 GB ROM
TF card
Micro SD 32 GB massimo (non inclusa)
Altre funzioni
Registrazione audio con microfono incorporato e tutte le applicazioni Standard di Android incluso Google Play Market
Batteria
Lithium-ion battery 3000 mAh interna
Connessioni
DC Jack, Micro USB, jack cuffie
Un saluto a tutti
ROM Tablet Allwinner A13 Cortex A8
Hello...
I have an Tablet China Q27B
Android 4.0.
Cortex A8
Allwinner A13
and I need the ROM
Thanks
Hello
I am the happy owner of a very nice new tablet from China: Teclast X1 Pro 4g. It has some very nice specs, among them the new Intel Core M processor, 4GB RAM, 128 GB SSD, a retina 12,2" display with 2560x1600, LTE, and dual OS, Win 8.1 and Android 4.4.
Here all the full specifications:
OS: Windows 8.1 + Android 4.4 (supports Win 10 update)
CPU: 64 bit Intel Core-M 5Y10C, 14nm, X86
GPU: Intel HD Graphics 5300
RAM: 4GB LPDDR3
ROM: 128GB SSD
Extend Card: Support TF card up to 128GB extended
Band: FDD-LTE, TDD-LET, WCDMA, TD-SCDMA and GSM
Screen: IPS Capacitive touch screen
Size: 12.2 Inch
Resolution: 2560*1600 Pixels AUO screen
Visible Angle: 178°
Camera: Support front camera, 5MP back camera
Gravity Sensor: Yes
Multi-Touch: Yes, 10 points touch
WIFI: Yes, 802.11 b/g/n
WiDi: support
HDMI: supports micro HDMI
4G/3G: Built in
Bluetooth: V4.0
4K video: support
HALL: support
USB: 2*Standard USB 3.0, support data transmission
Loudspeaker: dual speakers
Earphone Interface: 3.5mm
Battery: 53000mAh
Email and Browser: Yes, built in
Docking: support
Video: 1080P, MEPG1/2/4,H.263/H.264,RMVB,WMV/VC-1,MVC,AVS,MJPEG
Music: MP3,WMA,WAV,OGG,FLAC,ALAC,APE,AAC,AC-3,DTS(need license)
Image: JPG,BMP,PNG
Ports:
2 x Standard USB 3.0
1 x Micro SIM
1 x Micro HDMI
1 x TF card
1 x DC 12V
1 x Docking
Teclast X1 Pro 4G Tablet Size: 305*199*9.9mm
Teclast X1 Pro 4G Tablet Weight: 990g
The tablet is NOT dual Boot, the Androind is a virtual machine, windroye.
My problem:
I upgraded to Windows 10, and since then, windroye stopped working, and I get an error message demanding to enable hardware virtualisation in bios. But when I access the bios (UEFI), there is no possibility to do that. I mention that under win8 windroye was functional, and I followed the official Microsoft way to upgrade (win8 was activated, and win10 works fine)
So:
1. Can anybody help me with this issue?
2. Any idea about a way to make my tablet dual boot?
Thank you
Salut TheFrenchMan,
Tu me confirmes que la migration sous win10 a bien fonctionné et que seule l'émulation android déconne. As-tu solutionné ton problème ? J'hésite à investir dans ce modèle. Merci.
---------- Post added at 01:29 PM ---------- Previous post was at 01:23 PM ----------
Je la refais sans accent. As-tu trouve une solution ? Tu me confirmes que win10 fonctionne bien et que seule l'emulation android est hs. J'hesite a acheter ce modele. Merci.
Sur quel site l'as-tu achetee et par quel moyen de livraison ? Enfin WIN10 etait-il en chinois ? Est-ce que tu as du telecharger un langage pack ?
My phone info
Hardware : MT6580
Model : SM-N9500
Build number : MMB29K.G950FXXU1APFO
Build date UTC : 20170831-103530
Android v : 7.0
Baseband v: MOLY.WR8.W1449.MD.WG.MP.V23.P8, 2016/07/25 16:07
Kernel v : 3.10.0-2828982 ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP Thu Aug 31 18:37:56 CST 2017
Uboot build v : -----
LCD Driver IC : 1-mtk6580_jd9369_v3_dsi_vdo_hsd599_hd1080
I have completed install twrp v 3.1.1 to my phone but i forget backup ROM before wipe system so I lost the rom.
Any one have the ROM please share for me? Thank you so much
hi
get it from here
https://izforum.com/firmware/note-n8...305_n8_hdp_en/
if any one buys this rom
kindly share with us
Samsung note 8 (sm-n9500) clone firmware
Device Model : Galaxy Note8
Device CPU : MT6580
Device IntName : SM-N9500
Device Version : 7.0
Version on motherboard:
S305P N8 6580 V00x 3.3V SM HZ ANA
Note N8 SM-N9500 MT6580 (S305P N8)
S305
S305_N8
S305_N8_HDP
S305_N8_HDP_EN
Version rom:
S305_N8_HDP_EN_V0.0.1
S305_N8_HDP_EN_V0.0.2
S305_N8_HDP_EN_V0.0.3
S305_N8_HDP_EN_V0.0.4
S305_N8_HDP_EN_V0.0.5
S305_N8_HDP_EN_V0.0.6 i need this room my phone is bloked in boot
somebody has any rom for this device? please i need it
informazione
datt37 said:
My phone info
Hardware : MT6580
Model : SM-N9500
Build number : MMB29K.G950FXXU1APFO
Build date UTC : 20170831-103530
Android v : 7.0
Baseband v: MOLY.WR8.W1449.MD.WG.MP.V23.P8, 2016/07/25 16:07
Kernel v : 3.10.0-2828982 ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP Thu Aug 31 18:37:56 CST 2017
Uboot build v : -----
LCD Driver IC : 1-mtk6580_jd9369_v3_dsi_vdo_hsd599_hd1080
I have completed install twrp v 3.1.1 to my phone but i forget backup ROM before wipe system so I lost the rom.
Any one have the ROM please share for me? Thank you so much
Click to expand...
Click to collapse
buon giorno, sei riuscito a trovare la rom??? anche io ho lo stesso problema grazie
riccardino1978 said:
buon giorno, sei riuscito a trovare la rom??? anche io ho lo stesso problema grazie
Click to expand...
Click to collapse
You can download the firmware from the website below:
https://www.samsung.com/in/support/downloadcenter/
HIT THANKS IF FOUND USEFUL
Note 8 pro MT-6580 died boot
The same here but with a different
id: C19_80L_WE_3GW_B15_EMMC_32_8_DDR2_HD_PMZ_609_F_FM_20171207 15.8
Hint : a the back of the phone there is a tag it say's : " uni-tel " with the name of the model : Note 8 pro
if anyone can help me please do so because the phone will never boot up or charge if i can't found the right firmware.
Thanks in Advance :fingers-crossed: