Hi guys. this tvbox stuck on logo.
i tried push the av button but dont got response,
tried few firmwares but its not help
box have H313 CPU, XR819 wifi and eMMC 2\16
Related
hello community first of all im sorry if the post in the wrong section
secondly i have a tablet that when i turn on stuck at the first logo
which is "dual core aml-mx amllogic" this is what written on the logo
i don't know what is the problem i think that it needs a firmware
first problem i don't know how to backup this kind CPU firmware in case i find a working tablet same as mine to flash the working firmware to
i know how to do so for other brands like allwinner or rockychip but for this aml i don't know how
second problem i don't know how to flash a firmware to this CPU does it accept sd card flash firmware or usb and pc flash and how
plz anyone who know how to deal with this type of cpu or tablet help me
here is the tablest specification
borad : aml8726-mxs_mxl-mid-ref-86v_h-a-v1r1
touch flat : -8-6221 jyt
lcd flat : fpc7005013-a
camera flat :msd1115-qh86v-v13.0 blx.n
tablet only have power button and reset button "no volume up or down"
anything else needed plz reply to me with what other information needed
thanks you in advance and plz help me
ps : i recently downloaded a firmware from internet and tried to flash it with aml burning tool but the device seems to be disconnecting while flashing so the tablet now identified by the program but nothing appear on screen when trying to turn it on
anyone help plz :crying:
Hi Everyone,
I need firmware to flash via usb burning tool. i have tried around 20 different firmwares and had luck with 2 of them, unfortunately for me they keep stalling at the boot logo.
The A95x and Yundoo Y7 roms were the only firmware that worked.
Thanks in advance
dj10264 said:
Hi Everyone,
I need firmware to flash via usb burning tool. i have tried around 20 different firmwares and had luck with 2 of them, unfortunately for me they keep stalling at the boot logo.
The A95x and Yundoo Y7 roms were the only firmware that worked.
Thanks in advance
Click to expand...
Click to collapse
If u open the bottom off your android box the board usually has the model stamped on it. I tried lots of roms for my mxq box and found most of them didn't work. Also try using some of the sd card roms. I found some would load but brick the box. And if ye do brick yer android machine, don't panic coz can usually b fixes by flashing another rom
Hello everybody,
I have a tablet at home from my friend which does not start. No Logo, nothing. When I push the volume down button the pc recognize the tablet. But I don't know where to get the original Firmware for it. Can anyone please help me? Thanks a lot.
My Vontar TX92 Amlogic S912 Octa-core 64-bit, 3GB RAM, 32GB after some restart due to freeze on boot loading. now seems totally bricked, no display, and not even power button led.
It was with its original firmware without any other MOD before suddenly gone bricked.
Installing USB_Burning_Tool_v2.0.8_x86 when I attach It to USB It connects to the software but I haven't found its original ROM and any others ROM with a flashing guide for this specific TX92 variant to try to recover It.
Could someone help me?
Hi
I've the same problem.
I didn't found the solution yet.
If someone can help.
Still need?
Hello all,
I tried to install ROM ATVExperience but without sucess.
I tried with another sd card (I haven't cable USB Male/Male).
When I boot the box with the button reset pushing, I see a logo and very quickly screen became black and tv saif "no signal" like the cable was not connected.
I tried to change cable, I tried another port on my TV but nothing.
I this the installation of the rom doesn't work properly and not my box are bricked.
Do you have some idea for help me or do you think my box is dead ?
some informations about my box : Bqueel K12 - amlogic S912 - 2G RAM.
Many thanks in advance
Rudy.
Hello,
Finally, I build USN cable male/male and I install a firmaware that I took on the forum.
Box re-live
I dont find How I can solve this topics.
Rudy.