Related
Hi,
Just bought this tv-box and while trying to update it with a different rom bricked it. It shows just red LED and nothing happens, also while trying go into recovery (toothpick + power cable).
Does anybody have detailed tutorial how to unbrick the box ?
Thanx in advance.
I am in your very same situation. Tried the sd card burning method and also the usb one, but no success at all. Hope there is some solution.
resadent said:
I am in your very same situation. Tried the sd card burning method and also the usb one, but no success at all. Hope there is some solution.
Click to expand...
Click to collapse
Maybe someone could place a foto with indicated pins (to make circuit on flash chip) to go into recovery mode ?
etemmu666 said:
Hi,
Just bought this tv-box and while trying to update it with a different rom bricked it. It shows just red LED and nothing happens, also while trying go into recovery (toothpick + power cable).
Does anybody have detailed tutorial how to unbrick the box ?
Thanx in advance.
Click to expand...
Click to collapse
Head over to FreakTab, they have tutorials on how to unbrick it
Patrck744 said:
Head over to FreakTab, they have tutorials on how to unbrick it
Click to expand...
Click to collapse
We, or at least I, have tried all the tutorials on freaktab and read a lot of things on the matter but nothing seems to do the trick. It's really frustrating.
rubbish
resadent said:
We, or at least I, have tried all the tutorials on freaktab and read a lot of things on the matter but nothing seems to do the trick. It's really frustrating.
Click to expand...
Click to collapse
There might be a hardware change for those boxes, the Nexus ROM TV Stock thread has pics on what changed. Best to watch that thread since a solution might be posted soon
I am in the same situation. I tried the sd card burning method and also by the usb cable, but no success at all.
I have got m8s pro+ 2/16gb s905x, The device was purchased on the gearbest website.
some news from my yesterday fight:
sd card burning - many variants of rom, after restart, but on the mainboard there was not observed the reset button, only place named "k1" -> I soldered two points from "k1 place" to make a reset
after that
try by male-male usb cable and usb burning tool 2.0.8, Error result: [0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
I tried 4 different firmware's, and the same happens every time. Can anyone suggest something?
I can copy whole error if it can help determine the problem.
found on the internet
Romcode / Initialize DDR / Read initialize status / USB Control setup error
-> An error occurs when memory chips do not match. Firmware with ubut for some, but sew on others. It remains to ask the seller about the original firmware: (or shovel (look) available.
resadent said:
We, or at least I, have tried all the tutorials on freaktab and read a lot of things on the matter but nothing seems to do the trick. It's really frustrating.
Click to expand...
Click to collapse
I'm in the same situation!
gearbest give me a link for downloading yhe firmware but that don't work for me :
mega.nz/#F!gqgXwSCa!sFNDXrV_EMzAYAcJ68dV0w
If that can help someone.
Regards,
Cody57 said:
I'm in the same situation!
gearbest give me a link for downloading yhe firmware but that don't work for me :
mega.nz/#F!gqgXwSCa!sFNDXrV_EMzAYAcJ68dV0w
If that can help someone.
Regards,
Click to expand...
Click to collapse
I gave up after 3 days of wasting time with tools and this box... Ordered xiaomi mi box this time.
etemmu666 said:
I gave up after 3 days of wasting time with tools and this box... Ordered xiaomi mi box this time.
Click to expand...
Click to collapse
I will do the same....
i brick mine.....
Any help?
Where can i find *.img file and instruction to brink back in life?
Please help
I can help. My xiaomi mi box has just arrived, after a couple of hours of testing i can say, put that **** (m8s) to trash, buy xiaomi. I am happy that m8s was hard bricked now.
leonkoum said:
i brick mine.....
Any help?
Where can i find *.img file and instruction to brink back in life?
Please help
Click to expand...
Click to collapse
I trie so many roms... without success....:crying:
Cody57 said:
I trie so many roms... without success....:crying:
Click to expand...
Click to collapse
it's not the deal with ROM but with bootloader and recovery. Because it's not working rest of the problems are what box buy now ? Xiaomi or if are rich, nvidia. Screw that chinese scum. Try MI BOX and you'll find that xiomi is the real proffesional android tv (it's quick, responsive and my wife can handle it so it's the best user freiendly commercial )
etemmu666 said:
it's not the deal with ROM but with bootloader and recovery. Because it's not working rest of the problems are what box buy now ? Xiaomi or if are rich, nvidia. Screw that chinese scum. Try MI BOX and you'll find that xiomi is the real proffesional android tv (it's quick, responsive and my wife can handle it so it's the best user freiendly commercial )
Click to expand...
Click to collapse
I have a nvidia shield and I order a xiaomi mi box....
it was just to test a new box and it wasn't too bad.... before testing a new firmware
HELLO the solution for reinstall your rom
hello i have found the solution for you i have received my mecool m8SPRO+ today and i search button recovery
i have found this on freaktab :
You need to press the hidden reset switch (accessed via pinhole on bottom of case) when you connect the USB cable, and it's got to connect to the USB OTG jack, which is the one closer to the power jack.
or see on this video youtube on front panel : xxxxs://XXXX.youtube.com/watch?v=WpThZ2sgkhUt
or maybe same at this video an other place : xxxs://youtu.be/N27pAxtcDSg?t=268
if is not clic take a pinhole if is ok you arrived after bootloader MECOOL ON menu
and take a factory reset
if you don t boot
try method with microsdcard take on sdcard the firmware ota here only the file M8SPRO ota
xxxxs://mega.nz/#F!gqgXwSCa!sFNDXrV_EMzAYAcJ68dV0w
and renom on update.zip
then take power off if is ok you screen apperead with logo android green updating
or do method with usb burning tools
replace xx on web link the correct http
Unbrick the M8S Pro+ 2/16
Hi everyone,
I know how you're guys feel... Is there any new idea or suggestions to unbrick the devices?
After OTA Update the box only shows red and blue at the same time, no boot, no detection of windows with reset button or / with holding the circuit shortcut at "K1".
Can't believe that Amlogic is even worse than the Rockchip boxes to unbrick...
How to factory reset mecool m8s pro plus ? S905w android tv os
Guys i am in trouble with new mecool m8s pro plus ATV i bought..
I am new to xda ..
On the setup
Ipaired my remote
And then connected to my wifi
I then chose the option to put my email and password for the account..it signed in but in the end it was asking for location access i gave it but then i receive an error saying google sign in has stopped
And now i am stuck ..even whei restart box always stuck at the same loop
Guys i dont know what to do...i havent even seen its home screen ..i am in the loop of setting up device
I think maybe faftory resetting it may solve it...but i dont know how to do it ..as i dont know how to open recovery mode...
Hello, I have this tv box (MXQ Pro+ S905) 2GB RAM / 16GB ROM
The stock firmware is horrible, can you help me to upgrade it?
Do you have some firmware?
I tried to flash some firmware, but i think they was incompatible, i got only errors
Originally bought two identical MXpro Android TV Boxes. Since one of them freezes at startup on Android logo (won't enter launcher). My question: is there any way to copy certain files & folders directly from the other identical box to get it to boot up correctly once again? *issue is that I have no use of any computer at the moment. Either this method or any other suggestions would be greatly appreciated! Thanks! -Dave.D.
LordMauryZ said:
Hello, I have this tv box (MXQ Pro+ S905) 2GB RAM / 16GB ROM
The stock firmware is horrible, can you help me to upgrade it?
Do you have some firmware?
I tried to flash some firmware, but i think they was incompatible, i got only errors
Click to expand...
Click to collapse
If you have s905X with blue board than try this one :
https://mega.nz/#!jQ8HWIoQ!ubMpueVYGPA_PtE9snE1buZXjLUeFJP-mOd6vX91wkw
what you need to do is procure the factory image. i may be wrong but there isn't a S905 with 2 gb ram and 16gb nand. the first ones were S905x (excluding capabilities of the S912). there are plenty of alternative roms available including linux based. search around and you will find your firmware. you can even contact the seller you bought it from including amazon and ebay. check chinagadgetreviews.com also. alot can be found there. theres other forums too. once you find your correct firmware, reflash it and see if that resolves your issues. if not. boot twrp on the other one and make a full backup. take this backup, and move it to an area on your sd where you can find it then restore it on the buggy box. make sure you keep a backup copy of everything that works, especially if you cannot find the original. if you look really really hard, you may even find some fully compatible generic images that some developers are kind enough to maintain. you may need to make friends with a ruski to get it tough. thats the best hint im willing to give without provoking any admins or mods (sorry guys if i broke any rules).
im going back under my rock now.
oh and another tip, not all devices are the same. even if they say the same brand. there are differences in wifi chips. you should be able to figure this out. usually theres some model or sticker on the bottom or on the box it came in
LordMauryZ said:
Hello, I have this tv box (MXQ Pro+ S905) 2GB RAM / 16GB ROM
The stock firmware is horrible, can you help me to upgrade it?
Do you have some firmware?
I tried to flash some firmware, but i think they was incompatible, i got only errors
Click to expand...
Click to collapse
I HAVE SAME PROBLEM HERE...JUST 1MONTH BACK I PURCHASED MXQ PRO 2GB 16GB ROM...S 605W BUT UNFORTUNATELY IT HAS STUCKED WITH A LOGO ....NOTHING MORE...
SEVERAL TRIED TILL UNABLE TO DETECT PC
I have android tv 7 roms for s905x and android tv 9 roms for s905x s905w and s912 based boxes https://aidansrom.wordpress.com
aidanmacgregor said:
I have android tv 7 roms for s905x and android tv 9 roms for s905x s905w and s912 based boxes https://aidansrom.wordpress.com
Click to expand...
Click to collapse
not detecting box by usb burning tool...
mbox55980 said:
not detecting box by usb burning tool...
Click to expand...
Click to collapse
ahh, you may need to figure out "Mask Rom Mode" to force your device to be detected by burn tool, assuming you have already tried different usb port on pc, reinstalling burn tool & Also tryed adding power at same time connecting the usb cable
Hello, attempting to flash [S905X][FINAL]atvXperience seems to have hard bricked my Beelink Mini MX II III. Flashing failed with an X in front of the android guy, and now the box shows no signs of life. Any ideas for a fix?
Pictures of the board
https://imgur.com/a/ODPBNoZ
joeshmoe1 said:
Hello, attempting to flash [S905X][FINAL]atvXperience seems to have hard bricked my Beelink Mini MX II III. Flashing failed with an X in front of the android guy, and now the box shows no signs of life. Any ideas for a fix?
Pictures of the board
https://imgur.com/a/ODPBNoZ
Click to expand...
Click to collapse
Same hear, thats will happen when we flash some Andriano ROM and whatever they are called!! Nooobies rom
I have this device, try my android tv 9 rom and here is a video i made of how to unbrick your box
And see my rom here https://aidansrom.ml
aidanmacgregor said:
I have this device, try my android tv 9 rom and here is a video i made of how to unbrick your box
And see my rom here https://aidansrom.ml
Click to expand...
Click to collapse
Your rom bricked mine device. Mine device dont have TP
Formingus said:
Your rom bricked mine device. Mine device dont have TP
Click to expand...
Click to collapse
TP? not sure what you mean here, and are you installing using USB Burning Tool? this is the only way to upgrade to android 9, the SD card method wont work as android 9 has significant changes to partitions that the SD card method cant make
aidanmacgregor said:
TP? not sure what you mean here, and are you installing using USB Burning Tool? this is the only way to upgrade to android 9, the SD card method wont work as android 9 has significant changes to partitions that the SD card method cant make
Click to expand...
Click to collapse
Actually, i write to you on message and on the forum also and describe mine problem. Probably you didn't get or missed.
Downloaded all your ROMs for s905x and decide to test them.
Flashed few times two ROM's and everything was OK. Flashing via USB Burning Tool
1.[v7.5] (Nexbox) Aidan's ROM [S905X] Nexbox a95x 1GB 2GB+.img
2.[v7.5] (UNIVERSAL) Aidan's ROM [S905X] 1GB 2GB+.img
After i flash [v7.5] (MXQ) Aidan's ROM [S905X] [P212, P214 & P242] MXQ Pro 4K 1GB 2GB+ (720pUI & 210DPI).img
Box won't go anymore in Recovery mode.
USB Burn Tool will not recognize as a device anymore even reinstalled LIB Drivers and tested on 2 PC with Win 7 and Win 10
Via SD Card will not be recognized too - Fashing not start at all possible due missing recovery.
This Box don't have TP. There was no need to press the reset button to be connected when i flash with success, only inserting USB was enough. Now Box will start and hang on Aidans TV Logo and stay there forever. About Hardware its not 100% .
Mine Box is Beelink Mini MXIII 2GB-32GB S905X AnyHelp will be appreciated.
This is mine Box from hardware
Formingus said:
This is mine Box from hardware
Click to expand...
Click to collapse
Heres My Board & Points To Short
Your browser is not able to display this video.
Try just waiting.
Open USB, load other image which you knows it worked before, press Start immediately in USBT, than plug in your USB A-A and push the recovery button with toothpick. And than just wait. 5-15mins
Works every time with my box. No need to short anything.
This box was constantly freezing. Read somewhere that it requires a new firmware. The firmware that was on the box when I got it was 20181229. Tried to install a new firmware TANIX TX3 MAX & MINI "DUAL OS EDITION from usb stick using the method according to Tanix-box.com website " UPDATE FROM TF/USB MEMORY" . The software was loading fairly slowly so I stepped away for a moment and when I returned I had a blank screen on TV. Rebooted the box but only received the boot display and a black screen. realized I had bricked the box, Tried to download the same software using the usb burning tool but no go. I then tried the firmware TANIX TX3 MINI 20171220 using the usb burning tool. It downloads for about 7 seconds and then stops with an error. Obviously the wrong file. Here are the pics of my card. Sure hope someone can help me out. If I have to short a pin can you give me some details as I am pretty new at this. I do now have the original firmware and have looked everywhere, but can't find it. Thanks for any help on this issue, I've been reading and looking for a solution foe quit some time now.
Latest development, using USB Burning tool I loaded TX3Mini-20181210.img with no errors. I connected to TV and the T3 Mini logo cam on and the the android logo came on and was booting for just over 1 minute and then stopped and the display on the box was 0001.
billyfreeman said:
This box was constantly freezing. Read somewhere that it requires a new firmware. The firmware that was on the box when I got it was 20181229. Tried to install a new firmware TANIX TX3 MAX & MINI "DUAL OS EDITION from usb stick using the method according to Tanix-box.com website " UPDATE FROM TF/USB MEMORY" . The software was loading fairly slowly so I stepped away for a moment and when I returned I had a blank screen on TV. Rebooted the box but only received the boot display and a black screen. realized I had bricked the box, Tried to download the same software using the usb burning tool but no go. I then tried the firmware TANIX TX3 MINI 20171220 using the usb burning tool. It downloads for about 7 seconds and then stops with an error. Obviously the wrong file. Here are the pics of my card. Sure hope someone can help me out. If I have to short a pin can you give me some details as I am pretty new at this. I do now have the original firmware and have looked everywhere, but can't find it. Thanks for any help on this issue, I've been reading and looking for a solution foe quit some time now.
Latest development, using USB Burning tool I loaded TX3Mini-20181210.img with no errors. I connected to TV and the T3 Mini logo cam on and the the android logo came on and was booting for just over 1 minute and then stopped and the display on the box was 0001.
Click to expand...
Click to collapse
I installed TX3 mini 20181210.img on the box nd it worked. But the box is still freexing. Anyone else having this issue?
billyfreeman said:
I installed TX3 mini 20181210.img on the box nd it worked. But the box is still freexing. Anyone else having this issue?
Click to expand...
Click to collapse
Yo could try my custom Android TV 9 ROM, there are tx3 versions available, may work for you but no guarantees,
aidanmacgregor said:
Yo could try my custom Android TV 9 ROM, there are tx3 versions available, may work for you but no guarantees,
Click to expand...
Click to collapse
No doesn't work. Keep getting getinitial error
Hello there! Ive got problem with boot of my device or/and problem with USB Burning Tool.
First of all ive tried few hours to put right image to my device. When i tried with S905W but got problems with Uboot in USB Burning Tool ("0x32030201]Uboot/Get result/DiskInitial error". But i tried S905X and it went well but only when i uncheck erase flash and boot sections. That was the only way to finish burning correctly. And of course its not working and hanging on Aidens Rom Logo (i was w8ing more than 5 mins).
When i check "erase flash and boot" sections ive got those mostly
[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
[0x00101004]Erase bootloader/Lowper/Identify/Error result
And yes ive done the Mask Rom thing :/
Pls help
Anyone?
only thing ican suggest is keep trying roms, maybe s905x will stick, it has for a couple of people before
Hi all,
Model : Wechip V8
Cpu : Amlogic S905W
Ram : 2GB Rom : 16GB
They have installed a different version on this device. The remote does not control, does not find wifi, does not connect to ethernet. I couldn't find original software. I found some stuff but I couldn't install it.
can you help me?
Thanks
I have been using W95 S905W android box since early 2018. Over that time, I have tested multiple firmware on it and all the compatible ones have worked without issues. Eventually, I reverted to the stock and used it for about 2 years. One day, I noticed lagging on the device and decided to reboot it but it didn't power on. Since September last year, I've been trying to flash the stock rom and the rest that had worked before but I have not succeeded. I'm getting the error uboot/get result/diskinitial always at 7%. The box is successfully connecting to my computer even without pressing the reset button. Does anyone have a solution to this problem? Thanks.