I have a T225 based tablet which is in latest android 13 official build (not rooted) ,, I want to flash gsi on that directly through download mode (odin mode) ,,I don't want to use dsu sideload method therefore I need magisk pathed file to flash it in userdata slot ,, magisk patched was available on android 12 and 11 , can anyone provide me that for android 13 ??
[any samsung firmware based on android 13 would do the job]
alpezian said:
I have a T225 based tablet which is in latest android 13 official build (not rooted) ,, I want to flash gsi on that directly through download mode (odin mode) ,,I don't want to use dsu sideload method therefore I need magisk pathed file to flash it in userdata slot ,, magisk patched was available on android 12 and 11 , can anyone provide me that for android 13 ??
[any samsung firmware based on android 13 would do the job]
Click to expand...
Click to collapse
You cannot flash a GSI in download mode. You'll have to flash TWRP, then use TWRP to install the GSI to /system.
V0latyle said:
You cannot flash a GSI in download mode. You'll have to flash TWRP, then use TWRP to install the GSI to /system.
Click to expand...
Click to collapse
sorry to hear that but it was taking about making custom AP [replace system image file with gsi image] and then you can flash it with bl, csc, cp and userdata through odin as there is no working twrp available for T225
Read here you can changes from CustomAP to FastbootD. Read https://forum.xda-developers.com/t/...is-tool-for-tab-a7-lite-new-features.4544863/
Related
Hi,this is my first time installing a custom rom and recovery and rooting and all.
I am on MIUI 10 8.11.22 beta on RN3 2gb.
And have unlocked bootloader using official method.
Currently following
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-twrp-root-7-2-3-t3359492
Planning to
flash official twrp-3.3.1-0-kenzo
Install Havoc 9.0 OS https://forum.xda-developers.com/redmi-note-3/development/rom-havoc-os-t3845305
Install Magisk
but twrp site is showing
This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab.
Click to expand...
Click to collapse
I think it is about boot.img but I do not have patched boot.img of my miui version and also (from above guide) to patch boot.img i need fastboot rom but linkhttps://en.miui.com/a-234.html only takes me to Chinese miui website.
Can any one share link to boot.img of fastboot rom for MIUI 10 8.11.22 beta?
And in Havoc OS post
https://forum.xda-developers.com/redmi-note-3/development/rom-havoc-os-t3845305
do I need custom kernel for 9.0?
In Magisk Post
Prerequisite
If you plan to install custom kernels, flash the zip AFTER installing Magisk
Make sure to remove any ‘boot image mods’ such as other root solutions. The easiest way is to restore the boot image from factory images, or reflash a non-prerooted custom ROM
Click to expand...
Click to collapse
does that mean i do not need to flash boot.img or do i need to flash it afterwards?
Qustions
1) Do I need boot.img file of my version or any will do?
2)Do I need custom kernel for havoc os 9.0?
3) how to proceed after flashing twrp(need help)?
here what i think i have to do after flasing twrp(correct me If i am wrong)
(do not flash boot .img as installing magisk) -> flash havoc os -> flash magisk->flash custom kernel(which one?)-> (flash boot.img) ->reboot
ARY-Pyran said:
Hi,this is my first time installing a custom rom and recovery and rooting and all.
I am on MIUI 10 8.11.22 beta on RN3 2gb.
And have unlocked bootloader using official method.
Currently following
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-twrp-root-7-2-3-t3359492
Planning to
flash official twrp-3.3.1-0-kenzo
Install Havoc 9.0 OS https://forum.xda-developers.com/redmi-note-3/development/rom-havoc-os-t3845305
Install Magisk
but twrp site is showing
I think it is about boot.img but I do not have patched boot.img of my miui version and also (from above guide) to patch boot.img i need fastboot rom but linkhttps://en.miui.com/a-234.html only takes me to Chinese miui website.
Can any one share link to boot.img of fastboot rom for MIUI 10 8.11.22 beta?
And in Havoc OS post
https://forum.xda-developers.com/redmi-note-3/development/rom-havoc-os-t3845305
do I need custom kernel for 9.0?
In Magisk Post
does that mean i do not need to flash boot.img or do i need to flash it afterwards?
Qustions
1) Do I need boot.img file of my version or any will do?
2)Do I need custom kernel for havoc os 9.0?
3) how to proceed after flashing twrp(need help)?
here what i think i have to do after flasing twrp(correct me If i am wrong)
(do not flash boot .img as installing magisk) -> flash havoc os -> flash magisk->flash custom kernel(which one?)-> (flash boot.img) ->reboot
Click to expand...
Click to collapse
If u official unlocked using miunlock tool then u dont need any patched boot.img.
Flash latest twrp 3.3.1 kenzo
Download ur favourite rom and nano gapps zip to external sd card.
First go to wipe and do format data.
You must do it or rom wont boot.
So click Format data
Type Yes to format
This will decrypt and erase internal sd.
Then Swipe to "factory reset"
Then Go to install
Flash rom zip
Flash nano gapps.zip
Then Reboot and enjoy
Black_Stark said:
...
Click to expand...
Click to collapse
I know this is off topic but do you know something about "Red Light Blinking" and "init Storage:Fail" ?
Thanks for the tip. Currently on havoc os . Installation went smoothly
Hello, I updated to Q and can't get it rooted.
It bootlooped.
How can I root Android Q?
visit: h t t p s : / / twrp.me/site/update/2019/10/23/twrp-and-android-10.html
As, if now you cannot. For Android Q, it's still in research.
------------------------------------------------------------------------
Never tried but: ClockworkMod Recovery – a past alternative to TWRP custom recovery.
h t t p s : / / en.wikipedia.org/wiki/ClockworkMod#ClockworkMod_Recovery
Research over it & let me know if anything worked for you-!
I successfully roote Q with this ?
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
I just flash TWRP, format and flash custom rom. Rooted.
First of all. What device do you have and what exactly have you tried? Include references.
Remember first step is to search before asking.
Guys need to re root my device on android 10 cuz i had it root under android 9 and cannot use s health
Need to root to chanfe the build prop command to use s health
Also missing the heart monitor pressure
Please help me
G965f
StonebridgeGr said:
Guys need to re root my device on android 10 cuz i had it root under android 9 and cannot use s health
Need to root to chanfe the build prop command to use s health
Also missing the heart monitor pressure
Please help me
G965f
Click to expand...
Click to collapse
I would recommend you flashing custom firmware, like the one in my signature. Everything is working, including Security Folder.
Rooting S9 +
sarjarim said:
I just flash TWRP, format and flash custom rom. Rooted.
Click to expand...
Click to collapse
Which TWRP version you used and how did you install TWRP on a non-rooted phone? Do you not have to use Magisk to root the phone first?
xectis said:
Which TWRP version you used and how did you install TWRP on a non-rooted phone? Do you not have to use Magisk to root the phone first?
Click to expand...
Click to collapse
I just used the 3.3.1.1 from the TWRP site.
Flash TWRP is to root, so I did it b4 root.
1. OEM unlock
2. Flash TWRP with odin then boot to TWRP, samsung will restore if u normal boot.
3. Backup EFS
4. Format data wipe all
5. Dm verity, search newest from dr ketan
6. Flash custom ROM.
Magisk usually comes with the custom ROM.
sarjarim said:
I just used the 3.3.1.1 from the TWRP site.
Flash TWRP is to root, so I did it b4 root.
1. OEM unlock
2. Flash TWRP with odin then boot to TWRP, samsung will restore if u normal boot.
3. Backup EFS
4. Format data wipe all
5. Dm verity, search newest from dr ketan
6. Flash custom ROM.
Magisk usually comes with the custom ROM.
Click to expand...
Click to collapse
Magic! Thanks bro.
For Android 10 U9 bootloader, is not more possible flash custom binaries... even twrp!
G965FXXU9ETF5
hi im new to this but what do you mean by Q??
i have sprint s9+ sm-g965u1, can i root my phone now ?
Devilix said:
For Android 10 U9 bootloader, is not more possible flash custom binaries... even twrp!
G965FXXU9ETF5
Click to expand...
Click to collapse
This isn't true I flashed Twrp 3.5.091 via Odin, S9+ exynos android 10, then flashed Magisk 21.4.
When I got phone it was android 10 June 2020 security update. It then updated again to 21/02/2021 ota.. I was able to flash recovery twrp and root/debloat. Only problem I did find is that I cannot flash lineage 18.1 or any custom roms.
Regards
JeyKul said:
Hello, I updated to Q and can't get it rooted.
It bootlooped.
How can I root Android Q? No root method root android Q.
Click to expand...
Click to collapse
hey ,
1.install magisk manager on your phone
2.download the firmware from samfirmware for your model of phone to pc
3.download 7zip with lz4
4. use 7zip lz4 to extract boot img from AP(firmware)
5. send the xtracted boot.img to phone sdcard and use magisk manager to patch said image .
6. send the patched img to pc and use 7zip to create archive as boot.tar file
7. one you install the firmware as normal via odin (disable auto reboot ) go back and disconnect/reconnect usb from phone so it appears as added in odin once more.
8. add the boot.tar file to AP in odin and flash the phone , reboot system and install magisk manager again , go into magisk and it will reboot again to fix the root.
there is a video somwhere on youtube showing you better than ive tried to here.
this is by far he best way as you can still take ota updates because stock recovery is still present .
regards
I have flashed latest android 10 to my A3 and mistakenly uninstalled TWRP. Now i want to install twrp recovery. But everytime I flash it in partition b, it get stuck on fastboot screen.
If twrp doesn't support Android 10 then how come it supports other Android 10 based custom rom like Pixel Experience?
Because those custom ROMs use android 9 vendor, boot etc
Thanks for your helpful response
Sapper Morton said:
TWRP itself is compatible with Android 10, but not the pre-built image; the non-bootable state could be explained by the Pie Kernel inside twrp.img from official TeamWin website. Nonetheless, you can use Magisk to patch the Q boot image, or just download and flash the attached file, it's a v11.0.8.0 QFQMIXM boot image patched with the latest TWRP:
•https://app.blackhole.run/#5ae9e6c2301FpEtcnUSvhBisE7AD1JV98DHmKGDtK3WP
Click to expand...
Click to collapse
Thank you for your helpful response. If i want to flash twrp permanently, which zip file i need to flash after booting it temporarily with your attached twrp.img?
Sapper Morton said:
You must always use TWRP Installer (there's no need in specific custom ROMs, since they provide built-in custom recovery), the image I attached can only be used to install temporarily in Android 10 firmware (other than 11.0.8.0 QFQMIXM). And remember, all of this could be avoided if Xiaomi had implemented the boot command into Mi A3 bootloader:
Code:
fastboot boot image_example.img
Click to expand...
Click to collapse
so i am guessing there is no way to add the boot command to fastboot
build v11.0.11.0
Sapper Morton said:
TWRP itself is compatible with Android 10, but not the pre-built image; the non-bootable state could be explained by the Pie Kernel inside twrp.img from official TeamWin website. Nonetheless, you can use Magisk to patch the Q boot image, or just download and flash the attached file, it's a v11.0.8.0 QFQMIXM boot image patched with the latest TWRP:
•https://app.blackhole.run/#5ae9e6c2301FpEtcnUSvhBisE7AD1JV98DHmKGDtK3WP
Click to expand...
Click to collapse
Hi!
Thanks a lot, where I can find the file for the v11.0.11.0, or at least can you specify how I do this using stock boot?
Thanks! Hope to hear you back.
I booted with patched boot and finally was able to enter into TWRP recovery, but then I erased system/data/dalvik and tried to flash Pixel Experience but I am always getting error 1 when doing it. What can I do? It is something about the Android Q base? I'm now on build 11.0.11
Sapper Morton said:
You must always use TWRP Installer (there's no need in specific custom ROMs, since they provide built-in custom recovery), the image I attached can only be used to install temporarily in Android 10 firmware (other than 11.0.8.0 QFQMIXM). And remember, all of this could be avoided if Xiaomi had implemented the boot command into Mi A3 bootloader:
Code:
fastboot boot image_example.img
Click to expand...
Click to collapse
means that with this twrp it is used only to open the twrp periodically, once the custom rom is installed I install the twrp normally
Sapper Morton said:
TWRP itself is compatible with Android 10, but not the pre-built image; the non-bootable state could be explained by the Pie Kernel inside twrp.img from official TeamWin website. Nonetheless, you can use Magisk to patch the Q boot image, or just download and flash the attached file, it's a v11.0.8.0 QFQMIXM boot image patched with the latest TWRP:
•https://app.blackhole.run/#5ae9e6c2301FpEtcnUSvhBisE7AD1JV98DHmKGDtK3WP
Click to expand...
Click to collapse
What do you mean "patch the q boot image". What is that?
Sapper Morton said:
TWRP itself is compatible with Android 10, but not the pre-built image; the non-bootable state could be explained by the Pie Kernel inside twrp.img from official TeamWin website. Nonetheless, you can use Magisk to patch the Q boot image, or just download and flash the attached file, it's a v11.0.8.0 QFQMIXM boot image patched with the latest TWRP:
•https://app.blackhole.run/#5ae9e6c2301FpEtcnUSvhBisE7AD1JV98DHmKGDtK3WP
Click to expand...
Click to collapse
Thanks you saved me. I could boot into recovery with your boot.img but the encryption failed. Nevertheless I could sideload the recovery.zip to the device and install on both slots.
I have OPPO a5s device that supports project treble and I want to install Havoc OS GSI on it. My device has no fastboot and no unlock bootloader capacities and I found out that I can use SP flash tool can flash without fastboot and without unlocked bootloader which is perfect for me. Can I flash GSI to system partition directly?
Yes
OwenLeGrande said:
I have OPPO a5s device that supports project treble and I want to install Havoc OS GSI on it. My device has no fastboot and no unlock bootloader capacities and I found out that I can use SP flash tool can flash without fastboot and without unlocked bootloader which is perfect for me. Can I flash GSI to system partition directly?
Click to expand...
Click to collapse
Yes You can Use SP Flash tool on OPPO but Do at your Own Risk then Can Brick your Phone
OwenLeGrande said:
I have OPPO a5s device that supports project treble and I want to install Havoc OS GSI on it. My device has no fastboot and no unlock bootloader capacities and I found out that I can use SP flash tool can flash without fastboot and without unlocked bootloader which is perfect for me. Can I flash GSI to system partition directly?
Click to expand...
Click to collapse
yes, flash full stock rom and reboot and setup
add the gsi (renamed to system.img) into the stock rom folder (rename stock system.img to systemBAK.img)
turn phone off and flash as normal, it should boot into havoc, might take a bit longer than usual.
If you have no TWRP or custom recovery you cant flash Gapps so hopefully your havoc has those inbuilt
robneymcplum said:
yes, flash full stock rom and reboot and setup
add the gsi (renamed to system.img) into the stock rom folder (rename stock system.img to systemBAK.img)
turn phone off and flash as normal, it should boot into havoc, might take a bit longer than usual.
If you have no TWRP or custom recovery you cant flash Gapps so hopefully your havoc has those inbuilt
Click to expand...
Click to collapse
Thanks! I'm going to try it.
robneymcplum said:
yes, flash full stock rom and reboot and setup
add the gsi (renamed to system.img) into the stock rom folder (rename stock system.img to systemBAK.img)
turn phone off and flash as normal, it should boot into havoc, might take a bit longer than usual.
If you have no TWRP or custom recovery you cant flash Gapps so hopefully your havoc has those inbuilt
Click to expand...
Click to collapse
Hello! Can I flash the gsi directly without flashing full stock rom?
OwenLeGrande said:
Hello! Can I flash the gsi directly without flashing full stock rom?
Click to expand...
Click to collapse
Helo bRo, Did you succeed flashing Havoc OS on Oppo A5s. I also have same device.pls let me know ?
I have something similar
moto e6 play
it has fastboot but there is no way to unlock the bootloader
sp flash tool does not work but the lenovo tool [LMSA]
I can flash gsi but there is a problem, dm-verity does not allow me to start, red state
I tried to use an empty vbmeta but there are no results, if someone thinks of what to do and can tell me, I appreciate it, I would also like to point out that in the stock there are verifie files in addition to the normal ones.
Hi! Ive just installed los 17.1 from this guide : https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/
I have also installed twrp
But now Im confused on how to install magisk
Do I use the ramdisk from emui stock firmware and patch it and fastboot flash it?
Is there a way to get a ramdisk from the los image ?
Or is it possible to just flash the normal magisk zip in twrp ?
Any help would be appreciated thank you!
(Ane-lx1
Was running emui 9.0.0.133(c185))
DonnyRedZone1 said:
Hi! Ive just installed los 17.1 from this guide : https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/
I have also installed twrp
But now Im confused on how to install magisk
Do I use the ramdisk from emui stock firmware and patch it and fastboot flash it?
Is there a way to get a ramdisk from the los image ?
Or is it possible to just flash the normal magisk zip in twrp ?
Any help would be appreciated thank you!
(Ane-lx1
Was running emui 9.0.0.133(c185))
Click to expand...
Click to collapse
Simply download and flash patched recovery_ramdisk
-Alf- said:
and also copy to the SD card patched Recovery_ramdisk:
https://mega.nz/file/lp1kHLxJ#htCMaPjSsg_dy0w_jNOft-t_DZRAPwhOvwy_Wr2cjX8
Click to expand...
Click to collapse
Note: If you don't plan to use TWRP, simply install patched Recovery_ramdisk in fastboot mode. Run command
fastboot flash recovery_ramdisk magisk_patched-23.img ).
-Alf- said:
Simply download and flash patched recovery_ramdisk
Note: If you don't plan to use TWRP, simply install patched Recovery_ramdisk in fastboot mode. Run command
fastboot flash recovery_ramdisk magisk_patched-23.img ).
Click to expand...
Click to collapse
Thank you so much for helping me over the past few days man ur a legend !
(realised i was being stupid nvm)