Dear friends, I know there probably is a thread on this, I just cannot find it, so I apologize for starting a new one.
I have GTR 2e which is about 2/3 years old. Recently all the lights on the back stopped flashing and it will not pair with my iPhone any longer. It boots up normally but after I did a factory reset it now only starts up in with the QR code - I cannot see it in my bluetooth devices list on my phone not can I discover it in the Zepp app. Any help please
Related
Hi,
so today i've got the Amazfit BIP, but it's not working.
The problem is that i can't pair it for the first time.
After i've downloaded the Mi Fit App i wanted to pair the watch and i'm stuck on the pairing screen with the green and the red button. The watch doesnt react to any touch i'm making.
I've already tried the other apps like GadgetBridge and NotifyFitness, but it's always the same.
Is there a way to restart the watch?
Thanks for your help!
1. press the physical button to enable the screen touching
2. press the physical button longer(like 10 seconds or more) to reboot the watch
Hi there,
thanks for your reply.
But this does not work.
Nothing happens, just the backlight goes out
So you have to wait until the battery is down. I can't find another solution
same problem here!
i have the same problem; albeit mine is a new one.
i purposely have it unpaired; and thought "re-pairing" Amazfit Bip with my phone would solve the problem.
I was dead wrong. And now I'm stucked.
The phone were able to "see and recognised" the bip watch. However, the "Green" affirmative button cannot be confirmed as the touchscreen is NOT RESPONDING!
hi there,
i returned my watch and got a new one.
this time it works without problems.
Hi there
I am struggling to pair the Amazfit Pace with my iphone. I scan the QR Code and get an Error Message that says I need to unpair the device from bluetooth. The problem is, it's not in the bluetooth list for me to unpair it. I tried other devices including an iPhone 5... same error issue. I reset my iPhone, I removed Amazfit App from the storage of my iPhone.
What is this error? What do I need to do? Is this an Amazfit App issue?
I cannot get past the QR Code screen to see or do anything more than drive myself crazy going to the bluetooth setting to remove the device, knowing full well, it's not in the list.
any help? Or is this a junk smart watch?
The watch is new? If yes, probably you must first update the firmware using and Android phone with Android 7.1 or older, or use a Huami tool to install at lest firmware 1.3.8. If it's not brand new, probably it was paired with another account, then you must first unpair it properly from that account...
Edit: if you haven't done it yet, restarting the watch a couple of times may help too.
Hi,
Its only been 5 days that i am using my new amazfit GTR 2 watch connected with Oneplus 7pro.
Since yesterday just this is showing on the watch (see attached file)
I just dont understand what to do..
I have tried uninstalling the app.. didnt help. Disconnecting reconnecting via Bluetooth did not help soft reset did not help. Cant hard reset the watch since its showing just this arrow..
Update starts V5.2.11.1 but when it starts it ends after saying UPDATE CANCELLED. MAKE SURE YOU ARE CONNECTED WITH THE APP.
JUST CANT UNDERSTAND WHAT TO DO
See if this thread helps.
Amazfit GTS (important not GTR) - after update boot loop
Hi i have Amazfit GTS i paired it with my Zepp app next i change some settings and app finded new update. After update the watch in "boot loop" mode. I unpair with my app and i would pair agin but the code QR is not show. I cant pair, on screen...
forum.xda-developers.com
Ali52415 said:
Hi,
Its only been 5 days that i am using my new amazfit GTR 2 watch connected with Oneplus 7pro.
Since yesterday just this is showing on the watch (see attached file)
I just dont understand what to do..
I have tried uninstalling the app.. didnt help. Disconnecting reconnecting via Bluetooth did not help soft reset did not help. Cant hard reset the watch since its showing just this arrow..
Update starts V5.2.11.1 but when it starts it ends after saying UPDATE CANCELLED. MAKE SURE YOU ARE CONNECTED WITH THE APP.
JUST CANT UNDERSTAND WHAT TO DO
Click to expand...
Click to collapse
Hi same issue with me .. please inform if u solved this prblm
Were you able to solve it?
Hey guys,
I'm using Amazfit gtr 47mm smartwatch and it was stuck in the bootloop while i try to do restore.
Today the watch didn't connect with smartphone and I tried several times but no use. and I decided to do the factory reset. after that the watch doesn't came back and stucked in the bootloop.
if anyone facing the same issue please reply.
If anyone would like contact personally
use my mail. [email protected]
Hello friends. I know we are already in 2022 and most of the topics are in 2020. But I bought the Amazfit x now and I have a startup problem. He disconnected from the zeep application and went into an infinite loop. It only stops when the battery runs out. But as soon as I connect it to the charger it is back in infinite loop (Amazfit logo flashing) I've already tried to read all 26 pages here of XDA but I didn't find anything about my problem. If anyone can help me, I would be very grateful
same thing with my amazfit pop pro
i have the same problem with my amazifit x. has anyone solved?