Model: Tanix TX9 PROCPU: AMLogic S912OS: Android 7RAM: 3 GB DDR3
Hey guys,
As you can already read in the title I have a problem with the Tanix device. I've been trying to swap the original ROM for a custom ROM for the last few days, unfortunately I can't get into recovery mode.
The device always seems to hang as soon as I turn on recovery mode at startup.
Methods I've tried so far:
Recognizing and flashing the device on the PC via USB Burning Tool 2.1.6 - here it does not recognize the device, it gets stuck if i try to restart it via a pin
On the TV itself via the power cable - it also gets stuck here immediately if I want to restart it with a pin
It seems like there is a problem getting into recovery mode at all. Anyone know what else I could try?
Attached you can see the pictures of what can be seen on the TV and on the device itself if it gets stuck.
Related
Hey guys,
I have a problem. I own the MXQ Pro with the Blue Board (V1). I accidentaly tried to flash a version of openelec for V2 and now it doesnt boot up. It only shows this message "can't access tty job control turned off". I can still get it to connect with the usb burning tool but after showing that it is connected for a few seconds it just disappears. IDK what to do. can any of you please help me out?
Hello guys
I'm really desperate creating this topic, but about a problem i have with the flashtoom for my x96 Mini S905w
So far, i've tried
Using different versions of the USB burning tool program (2.06, 2.09,2.16)
Using differente firmwares (atvx 2FF, 2C, 2F, official x96 mini firmware 12052018, amlogic upgrade firmware)
Using Windows 10 and windows 7
Ticking and unticking erase flash (with normal erase, force, erase all) in every combination
Plugging USB while pressing the reset button with and without power plug
All of them give the same error : 0x10303004 (as attached in the image) at 4% percent uboot
Whats worse, the box seems to be softbrick (black screen on tv, nothing showing, even tried flashing with usb card maker with no luck, no recovery showing at all) at some point, still blue light, still recognized by computer but no sign of image or recovery on tv, even with sd card or usb recovery to flash (yes, i pressed the reset button too)
Am i missing something or something that i havent try yet? is it brick for good? I even open the box and attach the image, i think im using the correct firmwares. Please let me know if theres any solution to this. Im attaching the error log too.
Try T95S1 Image
Still having problems?
I think you will have to use the short pin method.
I can send you the photo of the board and which pins you have to short.
I'm not home right now.
Enviado do meu POCOPHONE F1 através do Tapatalk
can someone help me...how to enter recovery in X96 mini i want to flash it but i can not... there is a pin in AV hole which i keep pressing but no recovery mode, also PC does not see device etc...heeeeeeeeelp
You are flashing ROMs for s905w, instead of s905x.
Check below links for compatible ROM
http://firmware.duckdns.org/
https://forum.freaktab.com/forum/tv...s905x/others-aml-s905x/firmware-roms-tools-bx
https://mega.nz/#F!GEpQmQhZ!ezNEXQdnyNIhm2axjnfTIg
If your LED is red and not turning blue, try to power on using USB male A cable and power adaptor.
elazu1 said:
Hello guys
I'm really desperate creating this topic, but about a problem i have with the flashtoom for my x96 Mini S905w
So far, i've tried
Using different versions of the USB burning tool program (2.06, 2.09,2.16)
Using differente firmwares (atvx 2FF, 2C, 2F, official x96 mini firmware 12052018, amlogic upgrade firmware)
Using Windows 10 and windows 7
Ticking and unticking erase flash (with normal erase, force, erase all) in every combination
Plugging USB while pressing the reset button with and without power plug
All of them give the same error : 0x10303004 (as attached in the image) at 4% percent uboot
Whats worse, the box seems to be softbrick (black screen on tv, nothing showing, even tried flashing with usb card maker with no luck, no recovery showing at all) at some point, still blue light, still recognized by computer but no sign of image or recovery on tv, even with sd card or usb recovery to flash (yes, i pressed the reset button too)
Am i missing something or something that i havent try yet? is it brick for good? I even open the box and attach the image, i think im using the correct firmwares. Please let me know if theres any solution to this. Im attaching the error log too.
Click to expand...
Click to collapse
Hello guys, recently my box (it's labelled as OTT A95X Pro, has an S905W, 2gigs of RAM and 16gb flash memory) died probably because I plugged it out of power while it was updating (didn't do it on purpose) and it seems that I have a corrupt bootloader. I can only see a red light now with the blue light never coming to life. I have tried a lot of ways to recover from this but I always get to a dead end. These are the following things I've tried:
- Used USB Burner Tool from AMLogic, my computer recognized the box straight away but I always can't get pass 2% when burning an image. Have tried over 15 different images for S905w and over 5 different versions of the tool with no success. Also tried changing the cable and even connected the box straight to the PC's motherboard USB header. Have also tried to burn in Windows 10, 7 and XP, unfortunately with the same results.
- Used AMLogic SD Card Burner, created the bootable SD card and actually the box managed to recognize it (blue light was on), but always after the updating screen I was getting an android logo with a cross next to it and was stuck there, like the image wasn't correct or something.
- Decided not to flash a firmware at all and run LibreELEC (and CoreELEC) straight from an SD card. Downloaded the specific version for s905w, tried a lot of different devices trees (dtb files) but the box didn't even boot.
Before powering the box I was pressing the reset button for the recovery on the AV port. The only thing I haven't tried is short pinning but correct me if I'm wrong I think this is done only when your PC doesn't recognize the box, so I don't know if it will be any useful at all. Also I don't have a UART-USB converter, so I cannot connect to serial for terminal. Is there a way to recover from this? I'm in desperate need of help! Thanks for your time.
Hello,
i have some old NEXBOX A95X-B7N with 1gb RAM and 8gb ROM
I'm trying to install some custom ROM but i can't.
First problem is when i try to access the recovery mode i can't somehow it is skiping it when it's booting.
I'm starting it while i'm hoding the reset button into the AV port and still i can't view and access the recovery mode. I try also with USB to USB cable and USB Burning tool but i can't find proper ROM.
I will be very happy if someone advice me what to do ?
I need some rom which will work and some advice why i can't access the recovery mode. I think there are some installed rom already, but it's not from me.
Thank you in advanced.
hitreca said:
Hello,
i have some old NEXBOX A95X-B7N with 1gb RAM and 8gb ROM
I'm trying to install some custom ROM but i can't.
First problem is when i try to access the recovery mode i can't somehow it is skiping it when it's booting.
I'm starting it while i'm hoding the reset button into the AV port and still i can't view and access the recovery mode. I try also with USB to USB cable and USB Burning tool but i can't find proper ROM.
I will be very happy if someone advice me what to do ?
I need some rom which will work and some advice why i can't access the recovery mode. I think there are some installed rom already, but it's not from me.
Thank you in advanced.
Click to expand...
Click to collapse
hi, i would reccomend my android TV 7 ROM for nexbox a95x devices, fast & stable, as for device not being detected by burn tool, you've tried multiple ports on your PC & box?
It will be nice if you can provide me a stable rom for my A95x
Can you please provide me some link to download it.
About the burning tool and the ports....i have 2 USB ports. I've try in both of them. In one of the port i'm managing to connect it to the burning tool but after few minutes i'm loosing the connection for unknown reason for me. I'm suspecting that maybe due to a issue with the images with which i try to install with the USB burning tool.
In the video description there is download link for S905X, There is a Nexbox specific version (so the IR remote control & sleep works)
Download
hitreca said:
Hello,
i have some old NEXBOX A95X-B7N with 1gb RAM and 8gb ROM
I'm trying to install some custom ROM but i can't.
First problem is when i try to access the recovery mode i can't somehow it is skiping it when it's booting.
I'm starting it while i'm hoding the reset button into the AV port and still i can't view and access the recovery mode. I try also with USB to USB cable and USB Burning tool but i can't find proper ROM.
I will be very happy if someone advice me what to do ?
I need some rom which will work and some advice why i can't access the recovery mode. I think there are some installed rom already, but it's not from me.
Thank you in advanced.
Click to expand...
Click to collapse
I had no problem to install atvx into exactly same device.
Keep a95x disconnected from everything. Press AV button and hold it while you plug usb cable to right usb port. You mustn't plug power cable. Only usb.
You windows will connect to a95x if amlogic tool is running
And if that dosntvwork then you may need to use mask rom mode to force burning tool to see the device
aidanmacgregor said:
In the video description there is download link for S905X, There is a Nexbox specific version (so the IR remote control & sleep works)
Download
Click to expand...
Click to collapse
Hi Aidan, I flashed my a95x 2/16 with your rom and it’s just stuck on boot screen, when I try flash again it fails with usb burning tool, any suggestions?
I have a T9 4GB/64GB TV BOX (RK3328) TV stick, it got bricked. I tried all method to get it boot in maskrom mode but no luck. was flashing firmware its failed.
now my box not turning on.
I used flash tool to flash T9-4_64-RK3328-6255-v9-1228_AndroidTVBox image file. I attached flash log file and board image
I have no ideas, anyone please help!
Same Issue with me. it is dead, if you have found any solution just tell me
I was able to get it in maskrom mode by shorting these point
zee95 said:
I was able to get it in maskrom mode by shorting these pointView attachment 5661685
Click to expand...
Click to collapse
Hi @zee95 , I have the same problem, I bricked it trying to flash it, now it doesn't turn on not even the boot led nor recognized by PC when I plugged it with usb
Can you guide me please with the steps you followed to unbrick, how did you shorten those points. Thanks in advance @zee95
How you are flashing rom ?
The one i used with an incorrect firmware was Factory Tool v 1.46.
After that the box never turned on, nor even the t9 boot screen or the blue front leds. Also unable to been recognized by any flash tool.
I have tried with SD Card with firmware (using Rockchip Create Upgrade Disk) , hit reset button and power on, but nothing.
Also tried shortening with a clip and needle the two points you mentioned in the picture and plug the power cable at the same time but nothing.
Regards
Having same problim
when ever i connect to pc its in maskrom mode and cant exit from it
plz help