Hello. I have a Samsung Galaxy A5 from 2015. I was trying to install android 9 on it. But when i wanted to flash the lineage zip file, i've got a error. Updater process ended with ERROR: 7.
The same happens with gapps but with error 1. I can't use Magisk and other programs because the logo is bootlooping. And i can't turn on the phone( only recovery) i wanted to get the android 9 or 11. Now idk what to do with this phone. Thx for answers
To get rid off of all the modifications you made re-flash phone's Stock ROM.
Related
I have an l900 (Sprint Samsung Galaxy Note 2) with Philz touch 6 recovery. I have tried several different firmwares, including but not limited to Cyanogenmod 11, the stock firmware, and Sprint Kit-Kat. Attempting to install the zip(s) from recovery invariably results in "Installation started...Installation aborted" with no further explanation. I have not tried a sideload as I don't know how to get my computer to recognize the phone while it's in recovery mode (although I do have apk installed, and have successfully used it on a different phone while it was booted).
The phone currently has no working firmware. I got Cyanogenmod to install at one point (I don't remember how, or which version. This has been quite the process) but it wouldn't boot. It just stayed at the loading screen forever.
What can I do?
Hi I am having a bit of trouble flashing the unofficial CM 13 mod onto my Samsung galaxy S6 Edge [SM-G925I] Australia-Optus, 6.0.1,
Everytime I try to flash the mod, it ends up getting bricked and freezes on the 'Samsung galxy s6 Edge powered by android' screen.
Ok so here is the procedure i took:
1. Downloaded the mod from; http://forum.xda-developers.com/devdb/project/?id=12940#downloads (I downloaded cm-13.0-20151221-UNOFFICIAL-zeroltexx.zip) [Zip]
2. Rooted my phone using CF-Auto-Root-zerolte-zeroltedv-smg925i.tar.md5
3. Downloaded Flashify onto my phone and installed TWRP recovery through the app
4. Downloaded OpenGapps from: http://forum.xda-developers.com/gal...development/cyanogenmod-13-galaxy-s6-t3269984
(ARM, 6.0, Stock) [Zip]
5. Moved both CM zip and OpenGapps Zip onto my phone internal storage via usb cable
6. Went back into flashify and restarted the phone using TWRP recovery that i downloaded within the app.
7. Got into the TWRP recovery screen, went to wipe to factory new and install CM followed by OpenGapps
8. Then i proceeded to reboot the system, in which ends up getting bricked in the Samsung galaxy s6 edge powered by android screen.
If anyone could point out something i did wrong in the process it would be much appreciated.
A step to step guide would also be really helpful .
P.S. I am able to unbrick the phone using Odin and a stock rom
Mechquest said:
Hi I am having a bit of trouble flashing the unofficial CM 13 mod onto my Samsung galaxy S6 Edge [SM-G925I] Australia-Optus, 6.0.1,
Everytime I try to flash the mod, it ends up getting bricked and freezes on the 'Samsung galxy s6 Edge powered by android' screen.
Ok so here is the procedure i took:
1. Downloaded the mod from; http://forum.xda-developers.com/devdb/project/?id=12940#downloads (I downloaded cm-13.0-20151221-UNOFFICIAL-zeroltexx.zip) [Zip]
2. Rooted my phone using CF-Auto-Root-zerolte-zeroltedv-smg925i.tar.md5
3. Downloaded Flashify onto my phone and installed TWRP recovery through the app
4. Downloaded OpenGapps from: http://forum.xda-developers.com/gal...development/cyanogenmod-13-galaxy-s6-t3269984
(ARM, 6.0, Stock) [Zip]
5. Moved both CM zip and OpenGapps Zip onto my phone internal storage via usb cable
6. Went back into flashify and restarted the phone using TWRP recovery that i downloaded within the app.
7. Got into the TWRP recovery screen, went to wipe to factory new and install CM followed by OpenGapps
8. Then i proceeded to reboot the system, in which ends up getting bricked in the Samsung galaxy s6 edge powered by android screen.
If anyone could point out something i did wrong in the process it would be much appreciated.
A step to step guide would also be really helpful .
P.S. I am able to unbrick the phone using Odin and a stock rom
Click to expand...
Click to collapse
Its Not Only You CM13 Is not stable At this moment if By Chance It Boots On ur Device U will End Up Getting Stuck at locksceen xD And look At the Date IT hasent been updated since like 7 month
Hi!
So I rooted my Galaxy Tab 10.1 using the instructions here:
https://forum.xda-developers.com/showthread.php?t=2361571
I finally got it to root, and tried installing this ROM:
https://forum.xda-developers.com/devdb/project/dl/?id=26887
It failed, and now I'm stuck in a loop where it reboots several times and then goes back to TWRP 2.2.0. I can't seem to upgrade to a newer version of that OR back to ClockworkMod. Help? I just want to get a custom ROM on here and have it booting.
The model # is GT-P7510MA. No SD card slot.
Did you do a backup per the instructions?
Hi all,
I sadly followed an outdated Flash Manual on my S3 running Android 9 (used a Manual for 8). I succesfully installed TWRP and still have a working ODIN connection. Installing a clean Original Rom does not work though. Always aborts with an error message. My TWRP Backup Image seems to be corrupt also. It installs it back then my Tablet even starts but says it has to be restarted with default settings and when i do so it gets stuck in the bootloop again.
So my big hope is someone here can help me out with an Android 9 stock or maybe any other backup from TWRP to maybe get it back to the old state. Thanks in advance.
I do have a stock 9 for T825 in several parts directly from sammobile.
Would you mind writing which device you've got?
Which TWRP do you use.
Which Odin Version did you try it with?
Which original ROM did you try it with (where from, version aso) and why do you think another one would do the trick?
A backup from another device would'nt help afaik.
Hello!
Yesterday, after succesfuly installing the modified VBmeta image and flashing TWRP, i ended up wiping my OS accidentaly.
Trying to take advantage of the situtation, i searched some custom roms to install, and found the Lineage OS 18.0 Thread on the Galaxy a10 custom roms. I wiped the required caches, and flashed the OS, Magisk and Gapps (NikGapps) in this order.
However, my phone won't boot anymore. It shows the first samsung screen (warning me that i'm not using a official firmware), then the screen warning that the bootloader is unlocked, and then the phone just goes black screen indefinitely. I can force restart with power + volume down, but can't access recovery or download mode by any means, as it just goes black when i try. PC won't recognize the phone as well, giving me no way to install scatter firmware of any sorts.
Is there anyway to save my phone?
Hello! If you still have issues, I have the same phone. The problem was the custom rom I was trying to install (LineageOS). Crdroid booted up just fine.