First of all, Hello, Im Ivan, Im new to this phone thread but Ive been pretty active on other redmi devices.
My situation, the phone if turned on and left alone does the following
1.- splash logo
2.- new device configuration (select language and others)
3.- warning to activate phone with a previus account for about 1 second
4.- restart
If left alone this until the battery runs out.
If you hold up or down keys on 1, it gives takes you to the corresponding "FASTBOOT" or "stock recovery"
In 2 you can select options and move around the sceen (the warning on 3 is according to the language you manage to select)
In 3 if you select anything like "activate this device" or "set up internet " the phone freezes and it has to be turned off wich restarts the same cycle.
I disasembled it completely so I can enter EDL mode I have succesfully done it multiple times already, I know this because the devices admin shows me the device conected in COM9.
I got the correct ROM for my device and got Miflash tool, and when I try to flash on EDL it tells me "only nop and sig tag can be recevied before authentication" Im guessing Xiaomi locked even the EDL flashing so that only they can reflash devices, well I tried to loock elsewhere and try to use what we used on redmi note 9 "SPflash tool" but for that I require a scatter file that was suposed to come in "ROM/images/android_MT6XXX_scatter.txt" but there is nothing similar on there, is there any way to get the scatter file so I can try and unbrick this device?
TFT Unlock Tool For FRP Reset and Flashing for your Qualcomm and Mediatek Devices. Download now!
TFT Unlock Tool For FRP and Flashing your Nokia G10 and G20 devices. DOWNLOAD TOOL - GOOGLE DRIVE LINK 1. Extract the zip file and double click to begin installation. 2. Please enter the password in all caps as TFT and installation will begin...
forum.xda-developers.com
Related
Hi there guys!
My Xiaomi Hongmi S1 couldn't pass the boot phase after me trying to install Xposed. Then, the software Mi Phone Manager tried to recover the system files with the phone in fastboot (in this phase I still could enter fastboot and recovery) - somewhere along this process I had to leave and, when I came back, I had an error message in the software and the phone was turned off. After this I could not turn the phone on anymore, not even into fastboot or recovery.
MiFlash detects the phone even like this, but is unable to flash things into it.
PLEASE, HELP ME!
Someone?
Go in fastboot to pc
(you probably see anything on your phone)
On PC you can see if you are in fastboot by
Klicking on Refresh button on MiFlash you will see that you are connected
And Flash stock rom
See On thread (1)
(Also See MiFlash Picture from Thread)
Link: forum.xda-developers.com/showthread.php?p=53594673#post53594673
If that fails, your phone is probably broken.
Recently while flashing alpha version of MIUI marshmallow on my Mi 4w, my phone got completely bricked. Complete brick in the sense, it won't turn on, neither charge nor show any led indication. This guide should work on other phones also.Let's start:-
1) Although it seems like your phone wont turn on, your phone is actually working, it's just it wont show anything on the screen(no display).
Make sure your phone is charged properly(it will charge even if the led doesn't show any indication).
2) Download and install Mi flash tool and then Fastboot file of your device. http://en.miui.com/a-234.html
3) Unzip the fastboot image, a folder containing flash all.bat should appear if not, extract the extracted file again. Winrar should work fine.
4) Now open Mi flash tool(as administrator) and select the fastboot folder from Mi flash using browse option and also select the proper fastboot script according to need.
Note: Flash_all.bat will completely erase your internal storage.
5) Now press volume down(-) and power key to enter into fastboot. Note: it won't show any visual whatsoever but it'll work.
6) Connect your phone to your pc. It should show various flash devices connected to your computer and those devices may continuosly connect and disconnect. If not it'll show QHUSUB_BULK install the driver using device manager.
7) On Mi flash tool, some device name should show on the devices list if not click refresh and try reconnecting the device. Note: If you dont have proper drivers installed on your pc, this procedure won't work.
8) Finally click on flash and flashing will start. It'll take some time. Once done it'll show operation completed successfully.
9) Finally boot your device using power key.
Brick has received QHSUSB_BULK simple. This is the normal and regular encounter. Hardbrick, you must check point.
2ConHeo said:
Brick has received QHSUSB_BULK simple. This is the normal and regular encounter. Hardbrick, you must check point.
Click to expand...
Click to collapse
who said so?
tested and working
that normal check point is a pain in ass to execute in the first place
Thanks a ton.....It helped a lot
thank u...
thank
How do I put the phone into fastboot mode if it is hard bricked? It won't turn on, I get no responce from phone. When I use method connecting test point to metal cover on mother board of phone usb connects to PC and MiFlash recognizes phone. Try to flash though and I get an error message. No matter what ROM I use, zipped, unzipped or tgz file. Can my phone be unbricked? What am I doing wrong? I have a Mi Max 64GB and am using HELIUM Roms. Please help. Error message is:
The filename, directory name, or volume label is incorrect.(0x8007007b: Open programmer "MPRG*.hex").
I have no clue. Not my first time flashing ROMs or unbricking a phone. It is my first time on a Xiaomi. Only done blackberry and samsung before.
hammer77 said:
How do I put the phone into fastboot mode if it is hard bricked? It won't turn on, I get no responce from phone. When I use method connecting test point to metal cover on mother board of phone usb connects to PC and MiFlash recognizes phone. Try to flash though and I get an error message. No matter what ROM I use, zipped, unzipped or tgz file. Can my phone be unbricked? What am I doing wrong? I have a Mi Max 64GB and am using HELIUM Roms. Please help. Error message is:
The filename, directory name, or volume label is incorrect.(0x8007007b: Open programmer "MPRG*.hex").
I have no clue. Not my first time flashing ROMs or unbricking a phone. It is my first time on a Xiaomi. Only done blackberry and samsung before.
Click to expand...
Click to collapse
did you solve the problem ?
Rajdip said:
Recently while flashing alpha version of MIUI marshmallow on my Mi 4w, my phone got completely bricked. Complete brick in the sense, it won't turn on, neither charge nor show any led indication. This guide should work on other phones also.Let's start:-
1) Although it seems like your phone wont turn on, your phone is actually working, it's just it wont show anything on the screen(no display).
Make sure your phone is charged properly(it will charge even if the led doesn't show any indication).
2) Download and install Mi flash tool and then Fastboot file of your device. http://en.miui.com/a-234.html
3) Unzip the fastboot image, a folder containing flash all.bat should appear if not, extract the extracted file again. Winrar should work fine.
4) Now open Mi flash tool(as administrator) and select the fastboot folder from Mi flash using browse option and also select the proper fastboot script according to need.
Note: Flash_all.bat will completely erase your internal storage.
5) Now press volume down(-) and power key to enter into fastboot. Note: it won't show any visual whatsoever but it'll work.
6) Connect your phone to your pc. It should show various flash devices connected to your computer and those devices may continuosly connect and disconnect. If not it'll show QHUSUB_BULK install the driver using device manager.
7) On Mi flash tool, some device name should show on the devices list if not click refresh and try reconnecting the device. Note: If you dont have proper drivers installed on your pc, this procedure won't work.
8) Finally click on flash and flashing will start. It'll take some time. Once done it'll show operation completed successfully.
9) Finally boot your device using power key.
Click to expand...
Click to collapse
Link not working.
Using another mi flash tool also get nothing. How do I know I get into fastboot?
Already pressed volume down and power button but nothing happened. And checking fastboot devices nothing comes up. Also in mi flash tool nothing.
I know there is few hundered threads with "unbrick" in title but I read them all and nothing seems to work.
Friend brings me kenzo that he gets since his cousin brick it while trying OTA.
When I power phone its start to load system and it has 3 stages:
1. Show screen with "powered by Android" and 3 dots in the bottom, usualy about 4 min and restart
2. After restart just get black screen with Mi logo in the middle, for about 30 sec and restart
3. Instead of Android with dots bottom have white line progres bar, it takes 4 to 5 min and restart again.
After that stage 2 and 3 repeat for long as you have nervs to wait .
Phone can get in recovery and fastboot mode. And when I put him in test mode just show test screen and cant do anything.
In fastboot mode MiFlash recognize phone but report "device is locked" (try with 20160401 and 20160830).
After that i put him in EDL mode (fastboot reboot-edl) and MiFlash report successful flash. But nothing changes.
I try flashing global stable v8.0.5.0, china stable v8.0.4.0, global dev v6.10.13 and at the end global stable v7.2.5.0.
Any idea welcome. Thx
Have you tried to unlock bootloader? Perhaps install TWRP and do a system/dalvik/cache wipe and install MIUI through that?
banana_bender said:
Have you tried to unlock bootloader? Perhaps install TWRP and do a system/dalvik/cache wipe and install MIUI through that?
Click to expand...
Click to collapse
Cant do that. Even unofficial unlock need phone to be working to enable USB debbuging and accept RSA kay from PC.
Edit: Right now looking for ways to edit boot.img to unlock bootloader in attempt to get any useful recovery.
you can try this guide to flash twrp altogether with rom. after flashing, directly boot to twrp and move to custom rom
abihary said:
you can try this guide to flash twrp altogether with rom. after flashing, directly boot to twrp and move to custom rom
Click to expand...
Click to collapse
I will try... but dont think it will do the job. Will post result little later.
EDIT
It dose not work, just as I think.
All that kind of method/advice need 2 things:
1. Enabled USB debbuging - You cant do that on bricked phone even if you edit boot.img ( ro.debuggable=1 ) because fastboot will not execute command since you will not have option to accept RSA kay from PC on your phone and complete that action.
2. Dev ROM - since you have to enable OEM unlock and that option you have only in dev ROMs. Even Xiaomi official unlock requires that you must do it on dev ROM and that is a reason for "stuck on 50% in unlocking".
I try all that I can think: edit boot.img file, use patch emmc_appsboot.mbn, use edited flash_all.bat and rawprogram0.xml, insert sTWRP and ZCX TWRP in fastboot ROM... and all combination of that. Did it on 7.2.5.0 and 8.0.5.0 stable and 6.8.18 dev (since its last 5.1 ROM that I have).
Most of this attempts ends with "3 stages" explained in the first post. Some just show Mi logo for few sec and restart, once even power off phone. And once I even get phone to go directly to sideload/recovery state showing picture of the phone and usb cable.
Only thing left now is to find info is there difference in accessing to EDL mode between software (reboot-edl), deep flash cable and testpoint. IMHO there is none or little difference. Since software and deep flash can be troubled with bad USB cable or connector or USB board in phone.
Hi, I moved from custom ROM, pixel experience andriod 10 to miui 11 official.tgz using miflash tool.
When I first boot, I saw. Device manager is currpted, your device is unsafe now. I saw WiFi, rotation sensor not working too.
After a couple of re flashing again. Same problem. No WiFi .
Than I tried again to flash with an option miflash tool , "clean all and lock". This too didn't worked. And my bootloader locked.
Same problems ...
WiFi not working , will tap icon ,but won't connect or find networks
sensor is not working
Saw again at first boot, Find device manager is currpted , you device is unsafe now ,
Now, my bootloader is locked. Tried with old account that have used multiple times . I didn't work.
Signed for new one , through Facebook. When I try to unlock in DEVELOPER OPTION ,
Nothing happen, pop says preparing to add new account.
I tried to mi unlocktool, it says add account device first
I have locked boot now
ismail697 said:
Hi, I moved from custom ROM, pixel experience andriod 10 to miui 11 official.tgz using miflash tool.
When I first boot, I saw. Device manager is currpted, your device is unsafe now. I saw WiFi, rotation sensor not working too.
After a couple of re flashing again. Same problem. No WiFi .
Than I tried again to flash with an option miflash tool , "clean all and lock". This too didn't worked. And my bootloader locked.
Same problems ...
WiFi not working , will tap icon ,but won't connect or find networks
sensor is not working
Saw again at first boot, Find device manager is currpted , you device is unsafe now ,
Now, my bootloader is locked. Tried with old account that have used multiple times . I didn't work.
Signed for new one , through Facebook. When I try to unlock in DEVELOPER OPTION ,
Nothing happen, pop says preparing to add new account.
I tried to mi unlocktool, it says add account device first
I have locked boot now
Click to expand...
Click to collapse
try installing the rom zip
Enviado desde mi iPhone utilizando Tapatalk
ismail697 said:
Hi, I moved from custom ROM, pixel experience andriod 10 to miui 11 official.tgz using miflash tool.
When I first boot, I saw. Device manager is currpted, your device is unsafe now. I saw WiFi, rotation sensor not working too.
After a couple of re flashing again. Same problem. No WiFi .
Than I tried again to flash with an option miflash tool , "clean all and lock". This too didn't worked. And my bootloader locked.
Same problems ...
WiFi not working , will tap icon ,but won't connect or find networks
sensor is not working
Saw again at first boot, Find device manager is currpted , you device is unsafe now ,
Now, my bootloader is locked. Tried with old account that have used multiple times . I didn't work.
Signed for new one , through Facebook. When I try to unlock in DEVELOPER OPTION ,
Nothing happen, pop says preparing to add new account.
I tried to mi unlocktool, it says add account device first
I have locked boot now
Click to expand...
Click to collapse
Hi!
Something very similar happened to me a few days ago. After unsuccessfully trying to install Havoc 3.0 rom (Android 10) on my device, I decided to come back to Miui 11. Then I found this weird message, but instead of "device manager" I think in my case it said "...storage is corrupted...". I was lucky not to lock the bootloader. The solution was flashing via fastboot an old Miui rom, a Marshmallow one. Thay solved the problem. Keep on trying to unlock the bootloader. Good luck!
I had same problem and found an easy solution! Your presist partition is corrupt...do the following:
1. fastboot flash latest MIUI 11 firmware with miflash
-you will see the error message...ignore it for now
-if you are on latest MIUI 11 then ignore step 1
2. turn OFF the phone and boot into fastboot mode (volume down + power)
3. Connect phone to pc
4. download atached archive and unpack to a folder on your pc
-in folder you will see a file named "RedMi Note 4 & 4X EDL Mode"...with phone in fastboot mode and connected run that file...screen on phone will turn off and red light will blink
-now you are in "edl" mode
5. Open miflash tool and select folder that you unpacked from my archive...select flash all and flash your phone
6. After few seconds miflash will show flash done...you are good to go
Phone will turn off...disconnect it and press power button for about 8-10 seconds and phone will boot...done...no more error :good::fingers-crossed:
Hope this helped
Saky22 said:
I had same problem and found an easy solution! Your presist partition is corrupt...do the following:
1. fastboot flash latest MIUI 11 firmware with miflash
-you will see the error message...ignore it for now
-if you are on latest MIUI 11 then ignore step 1
2. turn OFF the phone and boot into fastboot mode (volume down + power)
3. Connect phone to pc
4. download atached archive and unpack to a folder on your pc
-in folder you will see a file named "RedMi Note 4 & 4X EDL Mode"...with phone in fastboot mode and connected run that file...screen on phone will turn off and red light will blink
-now you are in "edl" mode
5. Open miflash tool and select folder that you unpacked from my archive...select flash all and flash your phone
6. After few seconds miflash will show flash done...you are good to go
Phone will turn off...disconnect it and press power button for about 8-10 seconds and phone will boot...done...no more error :good::fingers-crossed:
Hope this helped
Click to expand...
Click to collapse
Will it work for locked bootloader?
Hello Guys,
this is my first thread in this forum.
A few months ago I have flashed a Custom gsi Rom on my device.
The Custom Gsi Roms had many Lags like I could not make Phone calls and so on.
So i decided yesterday to back to stock.
I have downloaded the original Stock Rom for this device and tried to flash it over fastboot.
This process was sucesfull,but the device wont boot.
It stucks in a bootloop.
it only boots until this point and then it reboots everytime.
many would say try to go into fastboot or recovery.I tried that by holding the Volume Down and Power Button,but it also does not work.
The device starts only until this point and it restart agin many times.
So after hours of research in the internet,I found the Edl Mode of Xiaomi Devices and I would use this mod to flash the Stock Rom and make the device usable.
But in the internet I did not find many Information how to enter it on tnhis mobile without entering fastboot.I only know about this two mainbord Points,but I dont know where to find them on this device.
Could you please help me,guys?
FleurUser said:
Hello Guys,
this is my first thread in this forum.
A few months ago I have flashed a Custom gsi Rom on my device.
The Custom Gsi Roms had many Lags like I could not make Phone calls and so on.
So i decided yesterday to back to stock.
I have downloaded the original Stock Rom for this device and tried to flash it over fastboot.
This process was sucesfull,but the device wont boot.
It stucks in a bootloop.
it only boots until this point and then it reboots everytime.
many would say try to go into fastboot or recovery.I tried that by holding the Volume Down and Power Button,but it also does not work.
The device starts only until this point and it restart agin many times.
So after hours of research in the internet,I found the Edl Mode of Xiaomi Devices and I would use this mod to flash the Stock Rom and make the device usable.
But in the internet I did not find many Information how to enter it on tnhis mobile without entering fastboot.I only know about this two mainbord Points,but I dont know where to find them on this device.
Could you please help me,guys?
Click to expand...
Click to collapse
Requirements:
Unlocked bootloader
Properly installed drivers
USB cable with data transfer support
First, you should download few things from this website
1. Modded SP Flash Tool(click at this blue text to download)
2. Drivers
3. Python (2nd most important thing)
4. MIUI FASTBOOT ROM (the most important thing) Choose the region which you want to flash
Steps:
1. Unpack sp flash tool wherever you want to
2. Run it
3. Unpack miui rom (it's packed twice so unpack it 2 times)
4. Load scatter file
5. Tick Auth Bypass (it's next to download button
6. Go to settings
7. Choose full speed transfer (i will write with more details when I'll be back home)
8. Exit settings
9. Click download
10. (THE MOST IMPORTANT STEP)Hold all buttons Vol+, Vol– and Power and then connect USB. Look at the bottom of sp flash tool, after a second of two from connecting phone to computer it should start (the progress bar should turn red)
11. Wait until flash is done.
12. Disconnect your phone from PC and hold power button until the phone vibrates and Xiaomi logo appears on screen
13. It should work now, if not, use this tutorial.