Realme 8 5g - Android Q&A, Help & Troubleshooting

I have an issue with this phone
Let me explain
First i unlock bootloader and all that stuff
Root the phone installed a custom rom
Suddenly I notice the Wi-fi was not workin and I installed an actualization, the phone runs out of battery
Now when I try to turn on the phone it says that the image had been destroyed and cannot boot
I cant go in to fastboot mode or recovery mode
My pc does not recognize the device
What can I do?

Take it to authorized service center and let them try to fix it.

Related

Big bricked device problem on EDL Mode

I bricked my RN3Pro on AOSP Extended Rom so i started to flash Xiaomi official rom by MiFlash. That took me 2000seconds on MiFlash so i disconnected phone (to try it again). It crashed from fastboot mode to EDL (red led is blinking). And now.. My phone is undetectable on my PC and two notebooks. I have xiaomi drivers / google drivers, tried to add new android drivers. Nothing helps.
Trying to detect phone by MiFlash, adb, fastboot programs (some versions.. "minimal" too). Its still undetectable. Devices list is always empty. I don't think this is because of the drivers, this was ok before installing this bad xiaomi rom.
I need my phone tomorrow so please help me!
Just press power + volume Down
Then unlock bootloader and then reboot phone
I have the same issue, stuck on EDL (red led blinking) unable to be detected on anything, cannot use buttons to get into Fastboot or recovery.
Please help!!
Use test point method...... U will find the trick on YouTube...
[email protected] said:
Just press power + volume Down
Then unlock bootloader and then reboot phone
Click to expand...
Click to collapse
Unlocking bootloader solved it.. I spent 6 hours. Phone started normally on old AOSP ROM. Thank you very much

Stuck in Mi Recovery 3.0 with a stock device

Hello,
This morning I turned off and on my phone (RN5 Global).
Now, If I try to start it, phone goes directly to Mi-Recovery 3.0 and, no matter how hard you try to restart, it always ends there.
More info:
- The phone is completely from stock. No root, no bootloader unlock, nothing.
- Mi-Recovery only let me Wipe All Data, so this would be an unfeasible option without first having recovered the data.
- My PC Suite does not recognize the phone.
- If I connect the mobile to the pc, 'adb devices' command says "sideload".
- If I try to make a backup by 'adb shell' it says "error: closed".
- I do not know if 'debug usb' is activated. I remember i activated it in the past, but I think that MIUI10 update deactivated it again.
- I can enter fastboot mode.
- I tried to open the phone, disconnect and connect the battery, but nothing has been fixed.
What can I do? My priorities now are:
1.- Recover the data (at least photos).
2.- Revive my phone.
Thank you.
Found this on MIUI, what do you think?
http://en.miui.com/thread-2171064-1-1.html
CiDsTaR said:
Found this on MIUI, what do you think?
http://en.miui.com/thread-2171064-1-1.html
Click to expand...
Click to collapse
If your device is Redmi Note 5 from other country but India then it´s Whyred and this Forum is for Redmi 5 Plus/Redmi Note 5 (only India) that is Vince.
In the case I´m right and your device is Whyred (two rear cameras is a simple way to note it) then as far as I know you will need an EDL authorized account to flash a rom through MiFlash Tool.
Other tool that you can use is XiaomiFlash Tool by Francesco Tescari through Mi-Recovery but you will need too have enable USB debugging (maybe you have) but the same way you can flash a rom also you´ll lose all your data.
Adb shell works only in rooted devices, you can´t backup nothing in this state and fastboot mode is limited to just few commands like list device/reboot devices and nothing more in locked bootloaders.
In this scenario you have two things in order to solve this issue:
1- Highly probable loosing all your data.
- Doing format data through recovery and try to boot (data lost for sure)
- Flashing a rom through recovery with the mentioned tool (99% data lost probabilities)
- Flashing a rom through EDL; if you have Vince you can do it but if you have Whyred I don´t think so (if you choose second option "Flash without erase userdata" in MiFlash Tool I guess your data will be preserved)
2- If you enabled before USB debugging and binded your Mi account with device wait the time to unlock bootloader and maybe booting first of all in TWRP you can recover some data from your device, if you unlocked but first of all you boot on system for sure all your data will gone.
So what happened? Were you able to solve it? PLs share if you were...
I am also faced that situation.
When i tried to flash stock miui through fastboot it locked the bootloader and cant boot into rom then mi flash tool cant flash as boot loader is locked.
Worst part is in order flash another rom i need recovery, unable to reach developers option as rom not booting up.
Lost hope on the device
After all so many google searches and sleep less nights
I found application called mi pc suite china
Try to flash miui rom through mi pc suite mode
It says boot loader locked do you want to unlock
Finally it unlocked boot loader without booting into mobile.
In your case that will app will work. try it
gldvs007 said:
I am also faced that situation.
When i tried to flash stock miui through fastboot it locked the bootloader and cant boot into rom then mi flash tool cant flash as boot loader is locked.
Worst part is in order flash another rom i need recovery, unable to reach developers option as rom not booting up.
Lost hope on the device
After all so many google searches and sleep less nights
I found application called mi pc suite china
Try to flash miui rom through mi pc suite mode
It says boot loader locked do you want to unlock
Finally it unlocked boot loader without booting into mobile.
In your case that will app will work. try it
Click to expand...
Click to collapse
THANK YOU THIS HELPED ME OUT A LOT
I JUST INSTALLED THE APP THROUGH THIS LINK - https://miui.blog/any-devices/china-mi-pc-suite-english-translation/
AND THEN CONNECTED MY MI4i TO THE PC. IT AUTOMATICALLY ADDED THE STOCK REQUIRED FROM THE INTERNET AND I DIDNT CLICK ANYTHING IN THE APP.
RehanSiddiqui said:
THANK YOU THIS HELPED ME OUT A LOT
I JUST INSTALLED THE APP THROUGH THIS LINK - https://miui.blog/any-devices/china-mi-pc-suite-english-translation/
AND THEN CONNECTED MY MI4i TO THE PC. IT AUTOMATICALLY ADDED THE STOCK REQUIRED FROM THE INTERNET AND I DIDNT CLICK ANYTHING IN THE APP.
Click to expand...
Click to collapse
BIG THANKSS, THIS HELP ME TOO
In my case my Redmi Note 7 MIUI 11.xx and had a update notification
im accidenly hold my power button my, and ALWAYS go to MI-Recovery 3.0 after several reboot
Im downloading that app and updating that app,
And copy the translate file from China to English (my pc WINDOWS 10 64x)
i chose "Connect to Mi Assistant" in phone connect to my pc and open the app, that can see my current ROM (MIUI 11.xx) can be update to "MIUI 12.xx" ,im flashing(updating) with "LEFT" option
that say "CAN SAVE UR SEVERAL FILES" than option RIGHT(DELETE ALL FILES) i guess i dont much remember
Im flashing(updating) with hope my files still in there,
The app start downloading the ROM and instaling to my phone 0% to 100%
My phone reboot and had notify "The system has been destroy"
After restarting several time, Im lossing hope on my phone,
Im trying hold my -Volume button while rebooting, then my phone booting on MIUI 12 in several minute
And "EVERYTHING ITS FINE" i have my all files,app,photos, just like my regular phone but have new MIUI 12 update Introduce changelog
I just wanna share my experience
THANK YOU A LOT
Seeing this Stuck in Mi Recovery 3.0 with a stock device
Thanks Dude... It works for my MI Poco F1.
Steps
Download chinese version of mi app (version 3 beta) from below link
Replace English Translated mi_phone_assistant.res file in installation folder.
Connect Mobile with PC
Open the Mi App Then Click the update button which shows upon opening
Phone automatically came back to normal (No loss in Data) and Remove Cable. Don’t Flash Data.
China Mi PC Suite with English Translation | MIUI Blog
Mi app recovery will not work on older phones like vince i suggest flashing through test point by removing the back cover and reconnect both points
mccholai said:
Seeing this Stuck in Mi Recovery 3.0 with a stock device
Thanks Dude... It works for my MI Poco F1.
Steps
Download chinese version of mi app (version 3 beta) from below link
Replace English Translated mi_phone_assistant.res file in installation folder.
Connect Mobile with PC
Open the Mi App Then Click the update button which shows upon opening
Phone automatically came back to normal (No loss in Data) and Remove Cable. Don’t Flash Data.
China Mi PC Suite with English Translation | MIUI Blog
Click to expand...
Click to collapse
it stuck at 99%
CiDsTaR said:
Hello,
This morning I turned off and on my phone (RN5 Global).
Now, If I try to start it, phone goes directly to Mi-Recovery 3.0 and, no matter how hard you try to restart, it always ends there.
More info:
- The phone is completely from stock. No root, no bootloader unlock, nothing.
- Mi-Recovery only let me Wipe All Data, so this would be an unfeasible option without first having recovered the data.
- My PC Suite does not recognize the phone.
- If I connect the mobile to the pc, 'adb devices' command says "sideload".
- If I try to make a backup by 'adb shell' it says "error: closed".
- I do not know if 'debug usb' is activated. I remember i activated it in the past, but I think that MIUI10 update deactivated it again.
- I can enter fastboot mode.
- I tried to open the phone, disconnect and connect the battery, but nothing has been fixed.
What can I do? My priorities now are:
1.- Recover the data (at least photos).
2.- Revive my phone.
Thank you.
Click to expand...
Click to collapse
Just remove SD card & SIM tray from phone and restart. I work for me. try at our end. Don't flash or connect anything.
CiDsTaR said:
Hello,
This morning I turned off and on my phone (RN5 Global).
Now, If I try to start it, phone goes directly to Mi-Recovery 3.0 and, no matter how hard you try to restart, it always ends there.
More info:
- The phone is completely from stock. No root, no bootloader unlock, nothing.
- Mi-Recovery only let me Wipe All Data, so this would be an unfeasible option without first having recovered the data.
- My PC Suite does not recognize the phone.
- If I connect the mobile to the pc, 'adb devices' command says "sideload".
- If I try to make a backup by 'adb shell' it says "error: closed".
- I do not know if 'debug usb' is activated. I remember i activated it in the past, but I think that MIUI10 update deactivated it again.
- I can enter fastboot mode.
- I tried to open the phone, disconnect and connect the battery, but nothing has been fixed.
What can I do? My priorities now are:
1.- Recover the data (at least photos).
2.- Revive my phone.
Thank you.
Click to expand...
Click to collapse
how u solved your problem , i am stuck in same stage .. help please
I was stuck in Mi Recovery Mode 3.0 on my Mi Redmi Note 5.
Even after doing reboot to system, it wasn't going back to normal.
After scratching my head for a lot of time I decided to do the old school thing, i.e. REMOVING the SIM card and SD card and pressing the VOLUME DOWN + POWER KEY until the vibration occurred (NOTE: Mi logo will appear while you have pressed but keep the 2 buttons pressed until vibration occurred).
harsimran27 said:
I was stuck in Mi Recovery Mode 3.0 on my Mi Redmi Note 5.
Even after doing reboot to system, it wasn't going back to normal.
After scratching my head for a lot of time I decided to do the old school thing, i.e. REMOVING the SIM card and SD card and pressing the VOLUME DOWN + POWER KEY until the vibration occurred (NOTE: Mi logo will appear while you have pressed but keep the 2 buttons pressed until vibration occurred).
Click to expand...
Click to collapse
were any files deleted? and do you perhaps know if it would work on redmi note 7?
hello guys just look this video i solved it
Hi all,.
I also faced the same issue my redmi note 5 Pro which was on I believe MIUI 10 because it was never updated from the day it was purchased got stuck in bootloop and not getting ahead after recovery mode no matter how much time you reboot it was all working fine but some apps were updating such as youtube when this incident occurred I tried every solution like pressing keys pressing all three keys simultaneously or ADB method but none could work since the phone was locked also there was no USB debugging so adb method wouldn't work to also if an if ADB connected I couldn't flash because it will remove the data, in recovery mod you can see in option connect with MI Assistant but the Indian English version shown no connection so found one youtube video (channel name -" Ach Sharif ", video link-
which helped to install chinese version and and solved login issues I used Google translate translate to read the Chinese characters and understand what is going on I connected the device intending to take a backup backup but as no option was available I had to click on flash device so it downloaded upgraded recovery rom and automatically flash to MIUI 11 but still same problem then again I connected and upgraded to MIUI 12 and the phone was able to boot so the phone finally got fixed all data and all apps were intact and working as originally also all data of WhatsApp chats etc remained even the open apps at the time when problem happened were still present.
I believe guys this is the only solution to the problem because while flashing it replaces the recovery module of the rom which was corrupted earlier in my case when MIUi 12 installed not 11 I feel that it replaced recovery module due to update and it was able to work so please try once and I hope you get your files back, now lesson learned please do regular backups to live worry free life otherwise we will be spending time and energy here only.
I believe ADB methods or other methods won't work because they will flash and you won't be able to get data only flashing through recovery ROM not fastboot rom just like update package will be able to solve your problem if it is a software problem it will be can be fixed fixed this way only and saving data if it's a hardware problem such as power of all volume buttons are stucked you just get change and everything will be fine it happened in my other phone redmi Y2 so from speaking from experience thats all as I was going through trouble these things really help me so I thought to spend time in creating this guide please follow and I hope it will be solved.
You must open back cover( easily you can do it by hair dryer) and disconnect and connect again the battery, it will fix

Hardbricked while trying to relock bootloader

Since i was recieving less SOT (4-3 hours on light usage) on my mido even after flashing the stock rom (xiaomi.eu rom), i decided to replace the battery at an authorised mi service centre. They said they wont accept unlocked mi devices. So i decided to relock the bootloader. Heres what i did, (im using orange fox recovery)
1 . wiped system, data, cache, dalvik cache
2. formatted internal storage
3.flashed stock rom (from the official site stable version)
4.flashed the lazyflasher zip
then after finishing the initial setup of rom, i went to recovery and flashed the stock recovery.
then in fastboot mode I ran the script " fastboot oem lock" to lock the bootloader. But after rebooting, mi logo blinks for a second or two and shows a black screen.
I checked the bootloader status and it says locked (device unlocked : false). I tried the testpoint method and the DFC method but pc dont detect my device and i cant find the qualcomm hs-usb qdloader 9008 in device manager. No matter how hard i try i cant get my pc to detect my phone in both the methods. Also when i try to get into edl mode (by shotting the first and 4th contact points located above the battery) i can hear windows 10 sound of detecting a device but nothing appears in the device manager. Im sure i have all the drivers installed and i really dont know what im doing wrong here. Is there any other way to unbrick my device?
Try detect your phone by using latest mi flasher. (Download and install it first). If your device's blink red, i sign if it in EDL mode. I dont know what happen to your device actually, because i never try to relock my mi phones using ''fastboot oem lock". I use mi flasher to relock my phone by clicking ''flash and relock" on Mi flasher. Try mi flash first, then comment here again if it fails.
aah i didnt know testpoint method requires battery plugged in, silly me. This time pc detected my phone (testpoint) and as per your suggestion i tried miflasher and it worked (yaay). thanks for helping me out here...
didnt xiaomi removed edl mode from RN4 due to security reasons??
Can anyone help me with this???
My OEM unlocking option gets unselected on its own even after my phone is unlocked. I have rn4 SD variant.

Mia3 softbrick //i need help :/

HI GUYS IM BLOCKED IN FASTBOOT (I THINK THAT IS A SOFTBRICK), AND I CAN'T UNLOCK BOOTLOADER WHIT NORMAL STEP BUT EVEN IN EDL MODE, CMD GIVE ME THIS ERROR: (failed device) oem edl is not allowed, I THINK I AM ON THE LIMIT, I REALLY NEED HELP, TRYING TO OPEN MY MOBILE PHONE TO TRY AN ACCESS POINT, I BROKEN THE REAR DISPLAY (IF SOMEONE HAS THE LINK OF SOME SHOP I WOULD BE GRATEFUL TO), AS YOU CAN INTUED, TODAY is a NO DAY
Try flash stock rom via mi flash tool
MIA3BROKENASS said:
HI GUYS IM BLOCKED IN FASTBOOT (I THINK THAT IS A SOFTBRICK), AND I CAN'T UNLOCK BOOTLOADER WHIT NORMAL STEP BUT EVEN IN EDL MODE, CMD GIVE ME THIS ERROR: (failed device) oem edl is not allowed, I THINK I AM ON THE LIMIT, I REALLY NEED HELP, TRYING TO OPEN MY MOBILE PHONE TO TRY AN ACCESS POINT, I BROKEN THE REAR DISPLAY (IF SOMEONE HAS THE LINK OF SOME SHOP I WOULD BE GRATEFUL TO), AS YOU CAN INTUED, TODAY is a NO DAY
Click to expand...
Click to collapse
You will need an authorized edl account to update stocks again, I am having the same problem, so if you can find any user I really appreciate contacting me with.
Mi A3 weirdly stuck in fastboot mode, please someone help
I recently opened my mi A3's bootloader and then flashed twrp image as it was error or something, my phones got stuck on fastboot mode and after that I have to flash stock rom v11.0.11.0 through mi flash tool and I successfully worked but then I installed magisk and flashed boot image to obtain boot image and that too successful worked but guess what real problem starts here, after the other day I restarted my device and android one logo showed up and then it got stuck on fastboot mode, then I have to again flash the same rom and again patched boot image file to get my phone back working and it went well for 2-3 days but suddenly, yesterday magisk notified that "DTFO is patched, tap to reboot" and I ignored and after that after few hours my phone automatically got restart and stuck on fastboot again and now when I try to flash the same rom again, it takes more than 3500s in mi flash tool and still not showing success, currently stuck on fastboot, no flash tool is working, can someone help please??

Asus Zenfone Max M2 without fastboot without recovery only black screen and the notification led in red

Hello everyone.
I'm going to tell you my problem and its story
I have an Asus Zenfone Max M2, I unlocked the bootloader, installed a magisk manager to root.
I decided to go further and install a custom ROM (I decided to install Pixel Experience version android 11 (Plus edition)) I did the procedure as recommended by the developer (Saalim) I even saw a related video on how to install Pixel Experience, I followed the instructions step by step, once the flashing process is finished.
I am about to restart the cell phone, and I find that at the moment of restarting the cell phone it only enters fastboot mode, no operating system, no recovery, just fastboot.
Investigating the solution was to reinstall the firmware, I did everything following the steps of the tutorial, once the process is finished and I decide to restart.
It sends me a message that says "Red State Your devices is corrupt turning of in 30s", I thought it was a problem that was when installing the firmware, I entered fastboot mode to try the process again, but in the middle of the process the cellphone was thrown by my pet and disconnected from the USB cable that was connected to the computer, quickly reconnected the cellphone and left continue the process, once the process is finished the cell phone restarted alone and what a surprise.
The cell phone starts with the black screen and with the notification LED in red, when connecting the cell phone to the computer it makes the connection sound but it is not recognized by adb nor fastboot.
PROBLEM: Devices no fastboot no recovery only black screen and the notification led in red i think is hard bricked
If you have any solutions, a hint would be appreciated
good day
See this:
Recover your X01AD using EDL mode and QFIL.
IT WILL ERASE ALL DATA ON YOUR PHONE AND KEEP YOUR BOOTLOADER UNLOCKED. YOUR WARRANTY WILL BE VOID AFTER IT. DO IT AT YOUR OWN RISK. DO IT CAREFULLY. (It won't erase your SD card, but I still recommend you remove SD card before it) Please read...
forum.xda-developers.com
I made this for you and your device
dascrystal said:
See this:
Recover your X01AD using EDL mode and QFIL.
IT WILL ERASE ALL DATA ON YOUR PHONE AND KEEP YOUR BOOTLOADER UNLOCKED. YOUR WARRANTY WILL BE VOID AFTER IT. DO IT AT YOUR OWN RISK. DO IT CAREFULLY. (It won't erase your SD card, but I still recommend you remove SD card before it) Please read...
forum.xda-developers.com
I made this for you and your device
Click to expand...
Click to collapse
thank you so much
How did you root it? I use the official app to unlock bootloader and idk the rest
gerald206 said:
How did you root it? I use the official app to unlock bootloader and idk the rest
Click to expand...
Click to collapse
Just make a backup (optional) and flash magisk using recovery.
i cannot enter into edl mode help me
...

Categories

Resources