i have the factory unlocked 10t no mods. The OTG will detect a flash drive and ID it but refuses to read or write to it, even when given the permission to do so.
It shows up in settings/storage but the only thing i can do with it is to eject it. No file manager will access it to read or write. If i try to create a file or folder it gives a generic error. I t-shot with OP and sent them Logs and got nothing back from them. The ONLY setting for OTG is OTG Connection which switches it off after 10 minutes. Doesn't seem to effect it at all. There are 2 settings in Developer Mode Default USB Config and Select USB Config. no combo of settings has gotten me a working OTG.
Has anyone gotten this to work or have any suggestions plz?
Thanks in advance!
toptech33 said:
i have the factory unlocked 10t no mods. The OTG will detect a flash drive and ID it but refuses to read or write to it, even when given the permission to do so.
It shows up in settings/storage but the only thing i can do with it is to eject it. No file manager will access it to read or write. If i try to create a file or folder it gives a generic error. I t-shot with OP and sent them Logs and got nothing back from them. The ONLY setting for OTG is OTG Connection which switches it off after 10 minutes. Doesn't seem to effect it at all. There are 2 settings in Developer Mode Default USB Config and Select USB Config. no combo of settings has gotten me a working OTG.
Has anyone gotten this to work or have any suggestions plz?
Thanks in advance!
Click to expand...
Click to collapse
Good time. The solution to the problem was found. Install the program from the link
Edit Moderation - Link to 4pda is crap - Use strictly banned
Give permissions when connecting USB, enable the following in the settings
jokersss84 said:
Good time. The solution to the problem was found. Install the program from the link
Edit Moderation - Link to 4pda is crap - Use strictly banned
Give permissions when connecting USB, enable the following in the settings
Click to expand...
Click to collapse
Thanks. But I have already tried MiXplorer. It didn't read either. I'm beginning to believe that the USB -c socket on my 10T is damaged in some way. I'm looking for the best and cheapest way to get it replaced. Thanks again.
Related
With apologies to Roebeet, who provided a response to an earlier inquiry about this - - but I couldn't interpret what to do - I am posting here to see if anyone who has flashed to TNTlite 4.4 has had a problem with connecting their PC to the gTab and being able to then see the sdcard drive and contents. When I connect now, the tab shows a "USB Connected" and then a USB Debugging Connected" message, but nothing can be seen on the PC, except, a removable disk (F and when that is hilighted the message "please insert a disk into drive F" shows up.
Any advice, reference to a thread that addresses this, or other guidance would be greatly appreciated.
Thanks!
Pinckneyite,
This is a new one to me and I read the forums pretty thoroughly.
Since the drivers that communicate to the PC are built in, the only
suggestion I can think of is to re-flash the ROM and see if it comes
up.
If not, then I would re-flash back to stock
http://forum.xda-developers.com/showthread.php?t=861950
and see if it works there. Along the way, you may need
to load CWM (ClockWorkMod) in case you need to clear/wipe, etc.
Do some loading and testing the let us know what you find out.
Rev
It doesn't automatically mount on your PC. You have to pull down the notifications menu and select "USB Connected." That will give you a dialog that will allow you to "Activate" USB file transfer.
K J Rad said:
It doesn't automatically mount on your PC. You have to pull down the notifications menu and select "USB Connected." That will give you a dialog that will allow you to "Activate" USB file transfer.
Click to expand...
Click to collapse
Ahhh. That worked. Guess I hadn't even looked there. Thanks!
You have no idea how long I spent trying to figure that out when I had that problem... ;-)
K J Rad said:
You have no idea how long I spent trying to figure that out when I had that problem... ;-)
Click to expand...
Click to collapse
Well maybe, then, you know what the "USB debugging" option on that notifications menu means? I see it there as an option to turn it off or on. Leaving it on seems to do nothing to handling file transfers, etc. What is it for? Thanks.
USB Debugging is a development tool. It's not necessary for average daily functions but a few apps out there require it. It won't hurt to just leave it on.
TNT (Lite) is different thatn AOSP based mods, that's correct - you just have to click on the "!" icon.
roebeet said:
TNT (Lite) is different thatn AOSP based mods, that's correct - you just have to click on the "!" icon.
Click to expand...
Click to collapse
Ahh. That was a !, not a 1. That was my problem the first try.
Basically i ve discovered an horrible thing with the JB version ... USB MASS STORAGE doesnt not exist anymore neither does work the internet connectivity from PC
Even i installed HTC Sync but it even doesn't detect my phone
when i plug my phone into the USB port, the options comes like " do u want to format the card before using it" File system not recognised? but on device, card is ok. everything working fine....
anyone has an idea for put the usb mass storage working correctly and efficiently to JB ?
PLz help me out... I nedd to transfer my files and music from pc to my storage device....
imranshah said:
Basically i ve discovered an horrible thing with the JB version ... USB MASS STORAGE doesnt not exist anymore neither does work the internet connectivity from PC
Even i installed HTC Sync but it even doesn't detect my phone
when i plug my phone into the USB port, the options comes like " do u want to format the card before using it" File system not recognised? but on device, card is ok. everything working fine....
anyone has an idea for put the usb mass storage working correctly and efficiently to JB ?
PLz help me out... I nedd to transfer my files and music from pc to my storage device....
Click to expand...
Click to collapse
Please go through this thread.
Stop creating duplicate threads.
Regards,
navmad
plz check both of the threads and see what information both have written. i have no intention here for redundancy but i need a solution. if u don;t have it, please don't post. if somebody have solution, please help me... and multi mount, mount sd, etc won't help at all. i tried everything....
imranshah said:
plz check both of the threads and see what information both have written. i have no intention here for redundancy but i need a solution. if u don;t have it, please don't post. if somebody have solution, please help me... and multi mount, mount sd, etc won't help at all. i tried everything....
Click to expand...
Click to collapse
I was directing you to an existing thread with the same header.
You could've posted the same there.
Nothing more. Chill ..
Hope somebody give you a solution.
Regards,
navmad
imranshah said:
Basically i ve discovered an horrible thing with the JB version ... USB MASS STORAGE doesnt not exist anymore neither does work the internet connectivity from PC
Even i installed HTC Sync but it even doesn't detect my phone
when i plug my phone into the USB port, the options comes like " do u want to format the card before using it" File system not recognised? but on device, card is ok. everything working fine....
anyone has an idea for put the usb mass storage working correctly and efficiently to JB ?
PLz help me out... I nedd to transfer my files and music from pc to my storage device....
Click to expand...
Click to collapse
Which HBOOT version are you on? I suppose ICS. Is that correct? If yes, follow instructions on http://forum.xda-developers.com/showpost.php?p=40241468&postcount=214. Those worked for me. Make sure the hTC drivers are latest with MTP driver installed and you have full root using flar2's method : http://forum.xda-developers.com/show....php?t=2136815.
One more thing, Step 5 in ckpv5's guide is very important. This will not work if you are running Multi Mount app from App Drawer. You have to add Multi Mount Widget on desktop and click that widget to mount your SD card.
imranshah said:
plz check both of the threads and see what information both have written. i have no intention here for redundancy but i need a solution. if u don;t have it, please don't post. if somebody have solution, please help me... and multi mount, mount sd, etc won't help at all. i tried everything....
Click to expand...
Click to collapse
Hes pointing out that this forum has rules, you have agreed to obey them, and you right now broke first of them (and its first, because it makes sense, not because its bull****), youre most likely here just to solve this problem and not participate any further, so you dont care if you and others like you flood forum with ten topics regarding EXACTLY same problem. So use that search button, its easy. Or read some general android changelogs before complaining about USB MASS STORAGE missing (why these 3 words in capitals, its not acronym, only USB is...)
+ at least try to type name of thread in english
Multi mount working for me on Jb on ICS-HBOOT
as I followed the steps for flashing the Rom and sd card workaround exactly how ckpv5 guided
multi mount app from market works.. i tried it and worked...when you install it you have to add a widget on the screen from this app and i think on one point you have to reboot..
just try it with patience dont install it and not try everything if you have no success just tell me i ll write a full guide here so everyone will be happy..
mhb92 said:
multi mount app from market works.. i tried it and worked...when you install it you have to add a widget on the screen from this app and i think on one point you have to reboot..
just try it with patience dont install it and not try everything if you have no success just tell me i ll write a full guide here so everyone will be happy..
Click to expand...
Click to collapse
It's not working for me. Widget is telling to connect USB / touch to close but when connecting to PC Windows is connecting via MTP - but no change of Multi Mount widget. 'MTP fix' option is checked.
Your support (or the announced guide) would be much appreciated.
Thanks!
today i ll have my pc...till night.. so i ll write a step by step guide to get usb storage mounted
sorry for taking me too much to right this but i hope it will help you!
http://forum.xda-developers.com/showthread.php?t=2318816
Simple Solution
Mobile network sharing --> USB --> Internet pass-through
JB Desire X now connected as USB mass storage on PC .
I was using myONEdx+ RC3.0 and DEODEXED Stock Rom -- Wi-Fi channels 12 and 13 could not be detected : (
Hello!I am new user in xda and i dont know its right place or not:silly:and also sorry for my bad englishHow can i enable/add otg support to my device?My device is an unknown device that uses in just Turkish schools named VP10.I get rid of the the restrictions.They gave us the tablet with a keyboard,we can use it and i think that its possible to use otg features on this device, i bought an otg cable but i cant connect my flash disk neither my external hard disk.i can not gave the hardware info because of this
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
its android version is İCS and uses ARMv7.İt rooted.
PS:İf you want , i'll give you the boot.img file.
Edit:When i used Usb host diagnostics it had said everything yes but when when i tried to open my usb from a file manager it says empty
Whenever i transfer files from my usb stick to my phone or the other way around i get disconnected at random times. How do you fix this ?
try the following
massivebanana said:
Whenever i transfer files from my usb stick to my phone or the other way around i get disconnected at random times. How do you fix this ?
Click to expand...
Click to collapse
you might try out transaction of files via another pd or might try out with another otg cable for the same
there is a possibility of these two things being faulty or incompatible with one another
if the problem still persists then there is slight change with your read/write permissions to the folders/files
might try out the above and let me know
hit thanks if i solved your query
rohitarora27 said:
you might try out transaction of files via another pd or might try out with another otg cable for the same
there is a possibility of these two things being faulty or incompatible with one another
if the problem still persists then there is slight change with your read/write permissions to the folders/files
might try out the above and let me know
hit thanks if i solved your query
Click to expand...
Click to collapse
pd ?, and how can it be the OTG cable fault, its an normal cable ? How do i change/check the read/write permissions ?
massivebanana said:
pd ?, and how can it be the OTG cable fault, its an normal cable ? How do i change/check the read/write permissions ?
Click to expand...
Click to collapse
just a bit confused here.
are you copying files from your pd (pen drive) to your phone via a otg(on the go) cable. or are you interpreting the data transaction with a pc.
also would like to know if your phone is rooted and are running a rom /kernel?
happy to help
Sent from my GT-I9100 using XDA Premium 4 mobile app
rohitarora27 said:
just a bit confused here.
are you copying files from your pd (pen drive) to your phone via a otg(on the go) cable. or are you interpreting the data transaction with a pc.
also would like to know if your phone is rooted and are running a rom /kernel?
happy to help
Sent from my GT-I9100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well apparently it started working, its only disconecting if i transfer files with the help of ES file explorer, if i use the default "browser" it works.
massivebanana said:
Well apparently it started working, its only disconecting if i transfer files with the help of ES file explorer, if i use the default "browser" it works.
Click to expand...
Click to collapse
default file manager works
its great to hear that
u can change the es file explorer and make it work by enabling the setting called root explorer
let me know if it works in es explorer as well
hit that thanks meter and tell i helped you happy to help.
B)
hey guys, i have a pretty big problem with my OnePlus3.
whenever i copy a lot of files (like mp3s) or very big files (movies) via usb from phone to pc or from pc to phone i basically always get an error somewhen during the copy process.
if it are a lot of small files most of them get copied and i just have to try the missing ones again. but bigger files are nearly impossible to copy due to this stupid error.
the error occurs on differnt points of the copy progress bar so its not always the same. i guess if i would try it 100 times i might have luck somewhen and be able to copy a big file.
i really dont know what to do about this...
i am running Freedom OS 1.7 (Android M), but already had this problem on privious versions and stock (OxygenOS). so its nor ROM related i guess. also i havent found any similar problem in OP3 section. no idea whats wrong :/
pc is win10, usb driver installed ofc.
if you need to know something else just ask.
please help me obi wan...eeh, xda. you are my last hope.
I have two options
First: Try transferring files wirelessly using shareit,xender etc....
Second: Go to mobile info and click on build number five to ten times
Then you will get a toast saying congrats you are a developer
Now Go to developer options in setting and enable usb debugging
Then try transferring the files again
Hope this solves your problem
Regards milkyway3
milkyway3 said:
I have two options
First: Try transferring files wirelessly using shareit,xender etc....
Second: Go to mobile info and click on build number five to ten times
Then you will get a toast saying congrats you are a developer
Now Go to developer options in setting and enable usb debugging
Then try transferring the files again
Hope this solves your problem
Regards milkyway3
Click to expand...
Click to collapse
thx for your help buddy. but it turned out the usb 3 port on my pc is just damaged. sometimes it are the obvious things you dont think about.
MarcTremonti said:
thx for your help buddy. but it turned out the usb 3 port on my pc is just damaged. sometimes it are the obvious things you dont think about.
Click to expand...
Click to collapse
So is your problem solved now
Regards milkyway3