I have unvlocked LG V60 thinq 5G UW. I have unlocked the boot loader with the procedure outlined in XDA forum. I also flashed Android 13 GSI, the flashing went normal, but bootlooped in rebooting. Now no USB detection, unable to revert back to bootloader. The phone is in repeat bootlop. I tried to go back download mode, but not working. I also tried EDL mode but this is also not working. On pressing power and V_ the phone goes to Modified system recovery. It is not working to go back to Safe Mode. It works on factory reset with erasing the data. It works on power down option, mobile switches off. Any advise or suggestion to comeout from this problem will be appreciated. Thanks
Related
Dear XDA Members,
My P765 now is on Bootloop, it wont load the OS. Before it happened, the phone was fine with CM 10.2 and CWM Custom. I try to flash again an TWRP which can only use to flash CM 11 Unofficial. After i flash the recovery, it went normal. I restarted the phone, and the phone was working. I copy the CM 11 then i try to flash it by entering the recovery again, but the method just open the fastboot page, not the TWRP. and now the phone bootloop on LG logo. I try hard restart, and it couldnt work. i try to flash again the KDZ but the KDZ updater said my phone not recognized. Does anyone knows what should i do to fix my phone? :crying: Thanks before.
BR,
CR
HELP!!
Even my LG-p765 is stuck in boot loop... actulally ringing boot.
But for me it happened during flashing recovery for the 1st time (i used tool tip for doing it).:crying:
Now my phone shows LG logo (just for a second) and restarts. This keeps happening unless i pull out the battery.
Please post, if anyone know how to recover from this the ringing boot.
If you can manage to get into fastboot and flash uboot and xloader, then connect the phone on software upgrade mode, it should connect. Although there is a catch, THIS WILL RELOCK YOUR BOOTLOADER.
No, it won't. If he install kdz by normal usb cable (not 910k), he will still have unlocked bootloader.
Hello! I rooted my Coolpad E560, a.k.a. Coolpad or Sky Mini and everything was fine until I decided to unroot it. It immediately restarted and will not boot ever since (stuck at logo). I opened recovery mode and selected wipe data/factory reset but it didn't solve the problem, neither did wipe cache. Then I selected reboot to bootloader. "Download and Install the package? Press volume up to agree or volume down to cancel". I press volume up and then it's stuck on "Information Do not disconnect the data cable". In the end I tried to flash stock rom. The only firmware I found was (phone name).CPB and it seems like the only flashing tool that can use .CPB is YGDP. But the flashing process doesn't even begin, it gets stuck on Entering download mode... I unsuccessfully tried to enter download mode on my phone. It doesn't have removable battery, some key combinations I tried didn't work. Now I don't know what to do. Any help will be appreciated.
bump
bump
How did u solve it ?
Did u solve it ? do you have any backup files that u can send me ?
denico_bg said:
Hello! I rooted my Coolpad E560, a.k.a. Coolpad or Sky Mini and everything was fine until I decided to unroot it. It immediately restarted and will not boot ever since (stuck at logo). I opened recovery mode and selected wipe data/factory reset but it didn't solve the problem, neither did wipe cache. Then I selected reboot to bootloader. "Download and Install the package? Press volume up to agree or volume down to cancel". I press volume up and then it's stuck on "Information Do not disconnect the data cable". In the end I tried to flash stock rom. The only firmware I found was (phone name).CPB and it seems like the only flashing tool that can use .CPB is YGDP. But the flashing process doesn't even begin, it gets stuck on Entering download mode... I unsuccessfully tried to enter download mode on my phone. It doesn't have removable battery, some key combinations I tried didn't work. Now I don't know what to do. Any help will be appreciated.
Click to expand...
Click to collapse
Lg g5 dead while ota update installation.
Everything I plug in a charger or press power button, lg logo appears and then a black screen with an error on top left corner.
After 1-2 seconds phone would restart and goes through this never ending loop.
Phnoe does boot into the recovery mode and except that I'm not sure about anything.
Got it checked at multiple locations but still no luck.
Had this phone laying around for over a year now in same condition.
Don't know what can be done.
Please help!
I'm not sure about the model number but in the inside of back door and on the charging port brick it says Ls992.
hmmm... if i were you, i will just go to flash TWRP recovery and then i custom rom OR even stock rom. I mean, your rom seems completely vanished, so just go to the many guides there are out there, to unlock bootloader, and flash TWRP and a rom
You can probably still boot it into fastboot or download mode, you could try flashing TWRP recovery in fastboot, or the stock firmware .KDZ in download mode.
Yes, fortunately you are only soft bricked. You can boot into download mode and reflash with lgup.
I tried to root my phone for the first time.
I booted into TWRP and installed SuperSU and TWRP, then my phone rebooted.
When I try to reboot it or turn it off it does the following :
it starts booting up, then after a second it reboots again, then flashes the boot screen and repeats this a couple times until it gets stuck on the boot screen.
My phone is a LG G6 (h870) ThinQ.
Android version 8.0.0.
Everything I did prior to this :
unlocked my bootloader and that reset my phone,
after that I accidentaly wiped it again using the hard reset option (while booting holding the power button and volume down button),
then i booted into TWRP again and installed SuperSU.
This is what I followed after unlocking my bootloader : android blog.gs/how-to-root-lg-g6-and-install-twrp-recovery-on-it/
Thank you for any help.
Hi,
I have Ls 990 rooted, twrp 2.8 with bump, cloudy rom2.5.
I was trying to get gsm bands working as this is a cdma phone with Sprint.
I was connected to usb, QPST server, and QXDM PRO at the time reading nv values etc.
I stopped working on it for awhile. Then came back. Read some more on my google. I wanted to see what cell connections I was getting related to the band and frequency. So I thought I would go into hidden menu. The phone was still connected to the usb but I don’t think this matters (?). I tapped on “device test”. It says AAT must start. I tap “ok”. The phone reboots but then gets stuck in the lg logo mode. I try to reboot again by holding down the power button to try and get into the hidden menu “mini OS” but it will never come up. I know others have gotten stuck here but the mini OS window pops up allowing them to reboot in “normal mode” but mine never gets there.
So I booted into twrp recovery and did a restore to my recent backup with a reboot but still stuck on lg logo. So I went back and wiped dalvik cache, cache and did a restore of same most recent restore point. Same thing with reboot it gets hung up on the lg logo forever.
I know there is a way to fix this, I just need some help or ideas to try.
Thank you.
Must be a way. Please help.
Thanks.
Solved. Had to do a factory rom flash with lg flash tool. Then stump, twrp bump, supersu, cloudy.
Back to where I was but learned even more now. Need to unlock the bands through QXDM. If there’s someone that’s done this I’d appreciate help.
Thanks.
Ps...interestingly once I rebooted after the factory rom flash the mini os window with AAT opened and allowed me to press power button and select normal reboot. It got hung up on AAT and caused this boot loop. Crazy.