Related
I was using XZXperience 2 on my Sony Xperia S, and then sony companion detected that i had firmware 6.1.A.1.45 and 6.1.A.55 was available, so just to give it a try, I installed that update, but that is a failed update, it says unfortunately music player stopped working, or unfortunately xperia keyboard stopped working etc. The main problem is that my system does not recognize my XS anymore, it says USB Device Not Recognized, so I cant connect it to Flashtool or PC Companion for repair. The Sad part is that I cant even connect it in Flash Mode, I tried a hard reset by using power button and volume up buttons, but no use. I should mention that once it recognized my phone when i turned off my laptop and removed its battery too, after restarting both phone and laptop, flashtool detected that phone was connected with USB Debugging OFF, though it was on, but as a try, I unchecked USB Debugging and then checked it again, and it worked. Now my Xperia S was connected in USB debugging mode, I tried to install busybox, rooted it, and tried to install CWM recovery,flashtool said that busy box was installed and phone was rooted, but it could not install recovery and I used another tool to install recovery,which had a bat file and it installs recovery automatically. But it didnt. After restarting my phone, the same issue appeared again, My PC does not recognize my Xperia S, tried previous procedure several times, but no use. Cant even repair it as my set cant go in flash mode. What can I do? have I bricked my Xperia S? I`m in Pakistan and there is no official Sony Mobile franchise as they dont launch their flagships in Pakistan. Please help me, considering I`m used to with rooting,flashing etc. How can I connect my phone in flash mode? Thank you.
Thanx
Sewrizer said:
It looks like another strike from the productors. They usually send you malicious updates which cause your device to stop working. This only happens to rooted phones which run custom roms. And since the rooted users only flash their roms in zip format, sending an OTA update patch(designed for stock rom) to a custom rom can only lead to a malfunction. I am not sure whether or not sony did that on purpose, but the truth is that after installing a custom rom NEVER do OTA updates(unless they are from the rom's developer).
If you want an update check your rom's thread and there may be new flashable versions.
As for making your device work, the only thing you can do is to call technical support or go to a phone service(in my country they are called gsm services, and they fix mostly everything, both hardware and software. Some even claim to be able to fix water damage) but given that your warranty is voided, you will have to pay for the reparations. I guess they will only do a re-soft(delete everything, and install the stock version, you may lose your root, i am not sure here.)
I hope this helps, this is how we fix things like this in our country, so it will work in your case too, hopefully.
Sent from Area 51 using my HTC Sensation XE, hit thanks if I helped
Click to expand...
Click to collapse
Thanx for your advice. I was almost hopeless, but after spending continous 16 hours, I`m now able to get a solution. I got another data cable, removed battery of my laptop, and made a hard reset to my phone, and after 10-15 min I tried again, and Thanx GOD, it detected my phone, so I hurriedly start repair my phone option and connected my phone in flash mode which was successful and that was not less than a miracle, because i`ve been repeating same procedure and it was not working, this time luckily it worked, now i`m using stock rom with firmware 6.1.A.2.55. Now I would either wait for official Sony JB Update or I would flash a custom ROM XZXperience 2, which I found awsome, as it had no bugs, and it improved battery and sound quality was significantly imrpove + Bravia Engine 2 with improved graphics. I would ask users to not to give up hope, there is always a solution to every problem.
device not recognized
jibraiel.hassan said:
Thanx for your advice. I was almost hopeless, but after spending continous 16 hours, I`m now able to get a solution. I got another data cable, removed battery of my laptop, and made a hard reset to my phone, and after 10-15 min I tried again, and Thanx GOD, it detected my phone, so I hurriedly start repair my phone option and connected my phone in flash mode which was successful and that was not less than a miracle, because i`ve been repeating same procedure and it was not working, this time luckily it worked, now i`m using stock rom with firmware 6.1.A.2.55. Now I would either wait for official Sony JB Update or I would flash a custom ROM XZXperience 2, which I found awsome, as it had no bugs, and it improved battery and sound quality was significantly imrpove + Bravia Engine 2 with improved graphics. I would ask users to not to give up hope, there is always a solution to every problem.
Click to expand...
Click to collapse
I have sony xperia s.....before it was working perfectly fine but than suddenly i got message on my laptop usb device not recognized.. i have not rooted my phone than also.. since then m suffering from it and transferring files via wi fi... please help me.. i tried almost every thing.. but i dont know how to perform hard reset.... and what kind of new data cable are u talking about..as i bought this phone from other country so sony service center is not entertaining....
pratik1315 said:
I have sony xperia s.....before it was working perfectly fine but than suddenly i got message on my laptop usb device not recognized.. i have not rooted my phone than also.. since then m suffering from it and transferring files via wi fi... please help me.. i tried almost every thing.. but i dont know how to perform hard reset.... and what kind of new data cable are u talking about..as i bought this phone from other country so sony service center is not entertaining....
Click to expand...
Click to collapse
Get a new data cable, fortunately almost all phone now a days have same data cable, u can try data cable of some HTC, Samsung, Blackberry or even Iphone`s data cable. Secondly, u must turn off your PC, and remove its power source, if it is laptop then also remove its battery. Then after 5-10 minutes, turn on your PC and connect the phone. Also try installing drivers, which u can by using PC Companion. You can also install drivers by using FlashTool. Download it and extract it, then go to the installation folder and look for folder "Drivers" open it and u will see an exe file. Just run it and select Xperia S and follow the instructions.
maybe not new usb cable sometimes usb port is broken
Hey, I had the same problem a few time ago, you can try to restore with flashtool, if you can still get in to flash mode
Sony xperia S not starting
Plzzzz help I m realy worried
few months back i had unlocked the bootloader of my xperia s and flashed CWM 10 on it...Now i Thought of locking the bootloader and to get official updates...i locked the bootloader directly by using flash tool....after i locked it and tried to turn on the phone it is not turning on...a green light just flashes once and the phone vibrates once after that nothing happens...plzzz helppp
elegantuser29 said:
Plzzzz help I m realy worried
few months back i had unlocked the bootloader of my xperia s and flashed CWM 10 on it...Now i Thought of locking the bootloader and to get official updates...i locked the bootloader directly by using flash tool....after i locked it and tried to turn on the phone it is not turning on...a green light just flashes once and the phone vibrates once after that nothing happens...plzzz helppp
Click to expand...
Click to collapse
-.-
There's nothing strange: you are using a custom kernel and you have locked bootloader
It's impossible it could work
You need to flash official stock rom to boot up
Sent from my LT26i using xda app-developers app
Phone responded
mirhl said:
-.-
There's nothing strange: you are using a custom kernel and you have locked bootloader
It's impossible it could work
You need to flash official stock rom to boot up
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
the phone has responded and is working now...i unlocked the boodloader using cmd..and the phone worked...One Thing plzz tell that i want to bring my phone to stock ics from sony..and want to get the OTA update...is it possible??
elegantuser29 said:
the phone has responded and is working now...i unlocked the boodloader using cmd..and the phone worked...One Thing plzz tell that i want to bring my phone to stock ics from sony..and want to get the OTA update...is it possible??
Click to expand...
Click to collapse
Since you CAN'T use custom kernels with locked bootloader (and so, no cm10)
You only need to flash stock rom and then relocking your bootloader
http://forum.xda-developers.com/showthread.php?p=23180725
Sent from my LT26i using xda app-developers app
I am also having the same problem
I have sony Xperia S. I updated to the latest stock firmware version(6.2.B.1.96). after this update I rooted my phone using old kernel .200 and update the firmware's kernel again to stock after that I locked the boot loader again. Now I can't use memory stick that I used to use before with OTG cable. And now, if I am trying to enter flash mode by pressing volume down key, the led turn green for a while only about 10 sec while this was happening, my pc say that USB device not recognized. So, now I can't use flashtool or sony update service tool(SUS) as well.
Now I am using stock .96 rom with no error but I want to install CWM and also want to unlock boot loader again to test some custom roms.
Pls help me what I have to do and what should. I am now in Delhi.
aungthumoe said:
I have sony Xperia S. I updated to the latest stock firmware version(6.2.B.1.96). after this update I rooted my phone using old kernel .200 and update the firmware's kernel again to stock after that I locked the boot loader again. Now I can't use memory stick that I used to use before with OTG cable. And now, if I am trying to enter flash mode by pressing volume down key, the led turn green for a while only about 10 sec while this was happening, my pc say that USB device not recognized. So, now I can't use flashtool or sony update service tool(SUS) as well.
Now I am using stock .96 rom with no error but I want to install CWM and also want to unlock boot loader again to test some custom roms.
Pls help me what I have to do and what should. I am now in Delhi.
Click to expand...
Click to collapse
To unlock the bootloader you need to enter fastboot (blue led) with vol+ during the boot, not vol-
Or you can also reboot the phone from adb with
adb reboot bootloader
If phone still doesn't stick to fastboot, it has to be a driver problem
There are lots of guide on the procedure (which is really hard on windows 8)
Sent from my noobish GT-I9100 using xda app-developers app
Yes i use windows 8.1
mirhl said:
To unlock the bootloader you need to enter fastboot (blue led) with vol+ during the boot, not vol-
Or you can also reboot the phone from adb with
adb reboot bootloader
If phone still doesn't stick to fastboot, it has to be a driver problem
There are lots of guide on the procedure (which is really hard on windows 8)
Sent from my noobish GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Yes I use windows 8.1
now. I can't use memory stick with OTG cable but I can only use mouse or keyboard with OTG cable. I don't know why?
I can access fastboot mode but I can't access flash mode. pc said that device not recognized. so, I think it is device error.
aungthumoe said:
Yes I use windows 8.1
now. I can't use memory stick with OTG cable but I can only use mouse or keyboard with OTG cable. I don't know why?
I can access fastboot mode but I can't access flash mode. pc said that device not recognized. so, I think it is device error.
Click to expand...
Click to collapse
I dont really understand what you did
But my advice is: unlock your BL and enjoy the magic of aosp ROMs (magic included inside doomkernel for stock sony is fine too)
Sent from my noobish GT-I9100 using xda app-developers app
Bricked my phone - please help!
Hi,
I think I bricked my Xperia S. I already had cyanogen 10 on my phone, so I thought I could just flash the new Cyanogen 11 4.4.2 ROM and GAPPS over top. I followed the instructions but I skipped the Fastboot step. I cleared the cache and system and then went ahead with the ROM and GAPPS. Once the ROM and GAPPS were installed, I selected "Reboot" and the phone turned off and now it won't boot at all. If I hold the power button, I get a faint vibration and if I hold the up volume and power I get the 3 vibration sequence but no boot. Please help!
This is what I was using:
http://forum.xda-developers.com/showthread.php?t=2555243
I was using my Moto Z XT1650-03 for about three months. In that time I was using LineageOS 14.1 on it.
Today, I logged off of my computer and took my phone out where it out of nowhere suddenly started rebooting before powering off never to come on again. I have connected it to the charger, where it has not had any indicator light come on.
I am at a loss, and do not have any money to replace this phone should it have to come to that.
stef_nix said:
I was using my Moto Z XT1650-03 for about three months. In that time I was using LineageOS 14.1 on it.
Today, I logged off of my computer and took my phone out where it out of nowhere suddenly started rebooting before powering off never to come on again. I have connected it to the charger, where it has not had any indicator light come on.
I am at a loss, and do not have any money to replace this phone should it have to come to that.
Click to expand...
Click to collapse
Connect the phone to the pc, wait a bit if you're on Windows 10 and it should recognize it as something like qcom 8009 loader".
Ok
Windows did see it as a Qualcoom 8009
stef-nix said:
Ok
Windows did see it as a Qualcoom 8009
Click to expand...
Click to collapse
Great, you can try blankflash.
I revived my Z last month with it (it was also dead but got recognized by the PC).
I'll try to dig up the proper version when I get home and I'll put it here.
The Marionette said:
Great, you can try blankflash.
I revived my Z last month with it (it was also dead but got recognized by the PC).
I'll try to dig up the proper version when I get home and I'll put it here.
Click to expand...
Click to collapse
Here, try this one:
https://mirrors.lolinet.com/firmwar...118-23-13-6-5_15_release-keys-cid2_vzw.tar.gz
You mighz need to try sith several cables, though.
In my case, it failed with 3 third-party cables and then I tried the cable from the Xiaomi Mi 5 and it worked.
My guess is that you need a usb c cable from any smartphone ( Samsung, LG, Xiaomi, etc. ) as long as it's the one that came with the phone and not a third-party one.
After the program is done, you should be able to enter fastboot only by connecting the phone to the pc ( it won't start like regular fastboot because this will be an "emergency" variant of a fastboot/bootloader menu ) and flash a stock firmware ( flash a 7.1.1 firmware first since the blankflash I put here will place an older bootloader for Nougat ) .
If you use a blankflash which has an Oreo bootloader and it messes up, you won't be able to use an older version to undo it, so use the one I put before anything else.
The Marionette said:
Here, try this one:
https://mirrors.lolinet.com/firmwar...118-23-13-6-5_15_release-keys-cid2_vzw.tar.gz
You mighz need to try sith several cables, though.
In my case, it failed with 3 third-party cables and then I tried the cable from the Xiaomi Mi 5 and it worked.
My guess is that you need a usb c cable from any smartphone ( Samsung, LG, Xiaomi, etc. ) as long as it's the one that came with the phone and not a third-party one.
After the program is done, you should be able to enter fastboot only by connecting the phone to the pc ( it won't start like regular fastboot because this will be an "emergency" variant of a fastboot/bootloader menu ) and flash a stock firmware ( flash a 7.1.1 firmware first since the blankflash I put here will place an older bootloader for Nougat ) .
If you use a blankflash which has an Oreo bootloader and it messes up, you won't be able to use an older version to undo it, so use the one I put before anything else.
Click to expand...
Click to collapse
I think it's too late for that (flashing with this first), but I'll try anyways. Your link is 404ing btw and are you sure I should be flashing VZW firmware on to this thing? This phone was bought carrier unlocked.
stef_nix said:
I think it's too late for that (flashing with this first), but I'll try anyways. Your link is 404ing btw and are you sure I should be flashing VZW firmware on to this thing? This phone was bought carrier unlocked.
Click to expand...
Click to collapse
Well, crap.
I wanted to use this as a last resort but...
https://forum.xda-developers.com/showpost.php?p=76453284&postcount=222
There's everything I went through to fix mine.
I'll try after work (We might have opposite time zone schedules). Chances are nothing happened in previous attempts using blankflash.
Please do hang tight
stef_nix said:
I'll try after work (We might have opposite time zone schedules). Chances are nothing happened in previous attempts using blankflash.
Please do hang tight
Click to expand...
Click to collapse
Again, if it's recognized as the qcom 8009 device, blankflash should work.
I had to use an actual OEM cable for the Xiaomi Mi 5 and a PC in my university library for it to suddenly work. Neither my laptop nor PC worked but the university PC miraculously did. Just keep trying with different cables and PCs/laptops.
I fear I may have bricked my phone while trying to flash a custom rom. I had TWRP installed. I used it to flash LineageOS and everything seemed to be going correctly, but then I rebooted the device and it after showing the initial splash screen it just turned off again. It only shows the splash screen now if I hold down Volume down and the Power button for 20 seconds. It doesn't boot into recovery mode or download mode and I don't understand why. I don't know if there's anything that could be done in a situation like this, but if anyone might be able to help I'd really appreciate it. The device is still in warranty, but when you turn it on it says that it's not running stock software so I don't know good of an idea it would be to try to get a replacement unit. I've done that before, successfully with another samsung phone I had about 7 years ago.
mimshipio said:
I fear I may have bricked my phone while trying to flash a custom rom. I had TWRP installed. I used it to flash LineageOS and everything seemed to be going correctly, but then I rebooted the device and it after showing the initial splash screen it just turned off again. It only shows the splash screen now if I hold down Volume down and the Power button for 20 seconds. It doesn't boot into recovery mode or download mode and I don't understand why. I don't know if there's anything that could be done in a situation like this, but if anyone might be able to help I'd really appreciate it. The device is still in warranty, but when you turn it on it says that it's not running stock software so I don't know good of an idea it would be to try to get a replacement unit. I've done that before, successfully with another samsung phone I had about 7 years ago.
Click to expand...
Click to collapse
Seems it's completely bricked and will need to reflash in EDL mode
TheExploitedOne said:
Seems it's completely bricked and will need to reflash in EDL mode
Click to expand...
Click to collapse
How do I boot into edl mode?
mimshipio said:
How do I boot into edl mode?
Click to expand...
Click to collapse
Usually through test points in the back of your device. If your able to get into recovery/main OS try adb reboot edl. If not you can able make or buy a deep flash cable that sets the device into EDL mode
TheExploitedOne said:
Usually through test points in the back of your device. If your able to get into recovery/main OS try adb reboot edl. If not you can able make or buy a deep flash cable that sets the device into EDL mode
Click to expand...
Click to collapse
I opened the device but there's no documentation on where the test points are. Will any EDL cable work? As I mentioned already, the device does not boot beyond the bootloader, no matter what.
mimshipio said:
I opened the device but there's no documentation on where the test points are. Will any EDL cable work? As I mentioned already, the device does not boot beyond the bootloader, no matter what.
Click to expand...
Click to collapse
Yep it's definitely in EDL. When you plug it in do you see Qcom HS-USB 9008 (or 9006) or just Qcom USB bulk or similar? If so then that's a good sign that you can recover, but you'll need a programmer that works with your device. Yes a deep flash cable should do the trick if not already in edl
TheExploitedOne said:
Yep it's definitely in EDL. When you plug it in do you see Qcom HS-USB 9008 (or 9006) or just Qcom USB bulk or similar? If so then that's a good sign that you can recover, but you'll need a programmer that works with your device. Yes a deep flash cable should do the trick if not already in edl
Click to expand...
Click to collapse
When I plug it in nothing happens at all. Thanks for the help. I think I'll buy a cable on amazon and see if it works :good:
mimshipio said:
When I plug it in nothing happens at all. Thanks for the help. I think I'll buy a cable on amazon and see if it works :good:
Click to expand...
Click to collapse
Do you not see anything in device manager or hear a connection? Unless your on a different chipset because the PBL cannot be corrupt by software. You're welcome! If you need further help please do send me a PM and we can go from there
TheExploitedOne said:
Do you not see anything in device manager or hear a connection? Unless your on a different chipset because the PBL cannot be corrupt by software. You're welcome! If you need further help please do send me a PM and we can go from there
Click to expand...
Click to collapse
When I plug it in nothing happens at all. If I try to turn it on while it's plugged, I get the charging screen but that's it.
mimshipio said:
When I plug it in nothing happens at all. If I try to turn it on while it's plugged, I get the charging screen but that's it.
Click to expand...
Click to collapse
Hmm seems it can boot into the kernel. Do you know the specs of the device? If it's Qualcomm I can go have a look around and see what I can find to point you into the right direction
TheExploitedOne said:
Hmm seems it can boot into the kernel. Do you know the specs of the device? If it's Qualcomm I can go have a look around and see what I can find to point you into the right direction
Click to expand...
Click to collapse
It's SoC is a proprietary Samsung chip. All Samsungs use proprietary chips afaik. The A10 uses the Exynos 7884.
mimshipio said:
It's SoC is a proprietary Samsung chip. All Samsungs use proprietary chips afaik. The A10 uses the Exynos 7884.
Click to expand...
Click to collapse
I thought they would have implemented a special mode of operation if you got into a brick like that. If the device comes on with the charger then it's probably not fully bricked. I've seen other threads that have had the same issue so you may have to check them out
TheExploitedOne said:
I thought they would have implemented a special mode of operation if you got into a brick like that. If the device comes on with the charger then it's probably not fully bricked. I've seen other threads that have had the same issue so you may have to check them out
Click to expand...
Click to collapse
Really? where have you seen other people with this issue? I've looked on the A10's forums but I found nothing. Could you send me some links?
mimshipio said:
Really? where have you seen other people with this issue? I've looked on the A10's forums but I found nothing. Could you send me some links?
Click to expand...
Click to collapse
Try to look for other devices and search deeply good sir you may find what you need. I use Qualcomm devices because we have a special EDL mode and I have a programmer for all my devices to restore in the case of a hard brick like yours. I've been able to use custom tools to create a restore firmware like the Zone 2 (LG) and flash the device far enough to get it into download mode to flash the KDZ
mimshipio said:
Really? where have you seen other people with this issue? I've looked on the A10's forums but I found nothing. Could you send me some links?
Click to expand...
Click to collapse
You'll need to search with other devices or just in general. I seen posts about it being in some USB mode but Samsung probably don't have that implementation
Hello,
I am currently facing the same problem. Were you able to solve the problem?
When i flashed the Evolution X Rom to Stock rom It Got Failed And My Device Is Not Turning ON.
Whenever I Tried To Install stock Rom using mi flash tool It Is Saying "Cannot Recieve Hello Packet" & write time out,maybe device was disconnected Please Help ME To Fix
The device is off?
Try to hold volume down and up at the same time and connect the usb cable to see if going to EDL mode.
If going to EDL mode you can flash a stock rom from edl with miflash.
papsr6 said:
The device is off?
Try to hold volume down and up at the same time and connect the usb cable to see if going to EDL mode.
If going to EDL mode you can flash a stock rom from edl with miflash.
Click to expand...
Click to collapse
Is not completly true... When the edl error "... Hello packet" appear is impossible. I also recived it when i tryed to make mia3-cce9 conversion. I retry many times but no success. Qualcomm port works, miflash connection works... But it's impossible to flash. I have searched every where on internet without succes. For me only fastboot flashing mode work. Not edl... I think this hello package is a software restriction of xiaomi. But i don't understand why some devices can bypass it and other fails
A question: you can enter in fastboot? I'm not sure you have try. Is the more simply solution. It's improbably that evolutionx had erase the bootloader... Connect phone to pc, then press power+vol- if you will see the xiaomy avatar.. you can recover the system. An advice for you: before flash a custom rom read with attention the guide. I suppose you haven't do this. And your modding level is low...
wetito said:
Is not completly true... When the edl error "... Hello packet" appear is impossible. I also recived it when i tryed to make mia3-cce9 conversion. I retry many times but no success. Qualcomm port works, miflash connection works... But it's impossible to flash. I have searched every where on internet without succes. For me only fastboot flashing mode work. Not edl... I think this hello package is a software restriction of xiaomi. But i don't understand why some devices can bypass it and other fails
A question: you can enter in fastboot? I'm not sure you have try. Is the more simply solution. It's improbably that evolutionx had erase the bootloader... Connect phone to pc, then press power+vol- if you will see the xiaomy avatar.. you can recover the system. An advice for you: before flash a custom rom read with attention the guide. I suppose you haven't do this. And your modding level is low...
Click to expand...
Click to collapse
I Had Tried EDL flashing from Unlock Tool Flashing Done Perfectly But Formatting Failed..Is it a partition error ?.. The Display is not turning on.. No Signal Only The Signal is Entering EDL mode
wetito said:
Is not completly true... When the edl error "... Hello packet" appear is impossible. I also recived it when i tryed to make mia3-cce9 conversion. I retry many times but no success. Qualcomm port works, miflash connection works... But it's impossible to flash. I have searched every where on internet without succes. For me only fastboot flashing mode work. Not edl... I think this hello package is a software restriction of xiaomi. But i don't understand why some devices can bypass it and other fails
A question: you can enter in fastboot? I'm not sure you have try. Is the more simply solution. It's improbably that evolutionx had erase the bootloader... Connect phone to pc, then press power+vol- if you will see the xiaomy avatar.. you can recover the system. An advice for you: before flash a custom rom read with attention the guide. I suppose you haven't do this. And your modding level is low...
Click to expand...
Click to collapse
papsr6 said:
The device is off?
Try to hold volume down and up at the same time and connect the usb cable to see if going to EDL mode.
If going to EDL mode you can flash a stock rom from edl with miflash.
Click to expand...
Click to collapse
My Phone Is Now Like This :
hishamhsm said:
I Had Tried EDL flashing from Unlock Tool Flashing Done Perfectly But Formatting Failed..Is it a partition error ?.. The Display is not turning on.. No Signal Only The Signal is Entering EDL mode
Click to expand...
Click to collapse
What you wrote is not good... I don't know unloock tool. But before use this applications is necessary read carefully the instructions. It seems you didn't have do this. Good luck. Ps: if your phone boot into fastboot reflash stock via miflash... If you don't have made a big damage it will work. Very import is select the correct slot before flash... In my case i always select slot a to make a clean and safe installation
wetito said:
What you wrote is not good... I don't know unloock tool. But before use this applications is necessary read carefully the instructions. It seems you didn't have do this. Good luck. Ps: if your phone boot into fastboot reflash stock via miflash... If you don't have made a big damage it will work. Very import is select the correct slot before flash... In my case i always select slot a to make a clean and safe installation
Click to expand...
Click to collapse
is mi authorized account needed
hishamhsm said:
is mi authorized account needed
Click to expand...
Click to collapse
Probably... Mee to i found this... But via fastboot is not necessary. Only with edl cold be necessary
wetito said:
Probably... Mee to i found this... But via fastboot is not necessary. Only with edl cold be necessary
Click to expand...
Click to collapse
no fastboot , no charging
wetito said:
Probably... Mee to i found this... But via fastboot is not necessary. Only with edl cold be necessary
Click to expand...
Click to collapse
will you help me to flash my phone via teamviewer
Sorry if you have damage bootloader (so fastboot don't work), the only way is edl. But i don't know how to solve edl flash fail. You had ask to other user, or search with Google. Or i'm afraid for you... Buy new phone. For the future if you want modding... Do it carefully
wetito said:
Sorry if you have damage bootloader (so fastboot don't work), the only way is edl. But i don't know how to solve edl flash fail. You had ask to other user, or search with Google. Or i'm afraid for you... Buy new phone. For the future if you want modding... Do it carefully
Click to expand...
Click to collapse
Thanks Bro Thanks For Your Support,.... Love From Kerala , India
Good luck
Same thing happened to me then i went mi authorised service centre and they charged 179rs and now my phone is working fine
azeem_saifi0411 said:
Same thing happened to me then i went mi authorised service centre and they charged 179rs and now my phone is working fine
Click to expand...
Click to collapse
is that phone under warranty while it was bricked
hishamhsm said:
is that phone under warranty while it was bricked
Click to expand...
Click to collapse
Sorry no. You have the bootloader unlocked... If your restore via edl will fail, in my opinion the best choice is buy a new phone. I don't know in your country. considerating that motheborard is not damaged... But phone must be open... The minum cost of this repair i think could be 100 € (convert in your currency). On YouTube there are a lot of tutorial how to do by yourself... But i'm not shure you have all skills...
wetito said:
Sorry no. You have the bootloader unlocked... If your restore via edl will fail, in my opinion the best choice is buy a new phone. I don't know in your country. considerating that motheborard is not damaged... But phone must be open... The minum cost of this repair i think could be 100 € (convert in your currency). On YouTube there are a lot of tutorial how to do by yourself... But i'm not shure you have all skills...
Click to expand...
Click to collapse
I Have Given It to A repair shop. They told me that that is emmc/UFS chip issue. So they will reprogramme the chip fix it and give the phone to me... They Told that it should fix..
Anyway I'm from India
hishamhsm said:
I Have Given It to A repair shop. They told me that that is emmc/UFS chip issue. So they will reprogramme the chip fix it and give the phone to me... They Told that it should fix..
Anyway I'm from India
Click to expand...
Click to collapse
I suppose that was the problem. I hope the repair shop in india are cheapest than in italy for the future... Make Modding with care
wetito said:
I suppose that was the problem. I hope the repair shop in india are cheapest than in italy for the future... Make Modding with care
Click to expand...
Click to collapse
Repairing cost around 10dollars . In India repairing cost is low but the price of mobile phones and spare parts are too high due to tax.
Thank you so much for your help and support bro. Love From India❤❤
can someone please help hard bricked brand new moto edge nothing will do anything no matter what try black screen. i'll pay someone to help please!! thanks
ThirteenSeasons said:
can someone please help hard bricked brand new moto edge nothing will do anything no matter what try black screen. i'll pay someone to help please!! thanks
Click to expand...
Click to collapse
If you have a pc, see if it's in EDL Mode
Is my device in EDL Mode?
sd_shadow said:
If you have a pc, see if it's in EDL Mode
Is my device in EDL Mode?
Click to expand...
Click to collapse
it is so how do i fix please???!!1 i'll legit pay you whatever want lol
sd_shadow said:
If you have a pc, see if it's in EDL Mode
Is my device in EDL Mode?
Click to expand...
Click to collapse
it is how do i fix
ThirteenSeasons said:
it is so how do i fix please???!!1 i'll legit pay you whatever want lol
Click to expand...
Click to collapse
??
ThirteenSeasons said:
it is how do i fix
Click to expand...
Click to collapse
You have 2 possible options
1. You can wait several days for the battery to die, then connect to a wall charger.
It may boot normally, this is the safest thing to try.
2. Use a blankflash there is one available for XT2061(burton) devices
https://mirrors.lolinet.com/firmware/moto/burton/blankflash/
download the blankflash, unzip it and
run the blank-flash.bat
If the blankflash works, the device will reboot, you may need to reflash firmware with fastboot or LMSA
sd_shadow said:
You have 2 possible options
1. You can wait several days for the battery to die, then connect to a wall charger.
It may boot normally, this is the safest thing to try.
2. Use a blankflash there is one available for XT2061(burton) devices
https://mirrors.lolinet.com/firmware/moto/burton/blankflash/
download the blankflash, unzip it and
run the blank-flash.bat
If the blankflash works, the device will reboot, you may need to reflash firmware with fastboot or LMSA
Click to expand...
Click to collapse
I accidently flashed moto g power into it when it's edge +... What if neither of those fix it? It's been unplugged for days. Idk if the bttrys dead cause no screen... Do you think fixable ?
ThirteenSeasons said:
I accidently flashed moto g power into it when it's edge +... What if neither of those fix it? It's been unplugged for days. Idk if the bttrys dead cause no screen... Do you think fixable ?
Click to expand...
Click to collapse
Ok, that's info you should have shared first.
Letting the battery die won't help.
Your only option is blank flash, but no guarantee that it'll work.