So The thing starts from a windows update, After the clicking restart from the power option the windows update starts. The screen says "Configuring windows update 30%" then the PC restarts Then the Blue Screen of death appears It says Unmount able Boot Volume and doesn't boot into the Windows. I tried fixing the error by Reinstalling windows from a flash drive and after a period of time the Blue Screen of death is back. Is there a permanent solution to this problem? Because each time I Reinstall windows all my files are getting deleted, which is really frustrating. I haven't even installed any unofficial software that can corrupt the boot files. I am facing this issue in both windows 10 and 11 on one single computer (2021 ASUS A17 TUF gaming laptop). I even got a exchange done for the laptop. But the new laptop also has the same unmountable boot volume error. Please can anybody help me on this problem.
thanks in advance.
Hi!
2 different laptops with same issue????
Can you explain step by step what are you doing?
Is windows stock windows image or any other else?
Pendrive was creates with windows Media creation tool?
Give us all details so we can help you!
@DJEinsteinBS
look inside here:
How to Fix UNMOUNTABLE_BOOT_VOLUME BSOD in Windows?
The Unmountable Boot Volume is a BSOD error that occurs when the boot volume is not accessible for the system. One of the main reasons that bring this
appuals.com
Related
Hi
My Acer A100 does not boot and gets stuck at android(written not logo). It was having HC.
I tried Hard reset, but no use
Tried copying update.zip file in formatted sdcard and tried to power on the tablet with volume buttons pressed, it shows reading file from update.zip file and then when android logo shows up and starts, it looks if its going to flash from update.zip file, but then after 30% scan, it shows warning sign and aborts progress bar.
I never unlocked bootloader or never upgraded from HC.
Can not be detected when connected to windows 7 home premium laptop or desktop. Tried installing USB driver on laptop from acer, but it gives an error while trying to install and after that it says successfully installed. On Windows XP, USB driver gets installed and MTP device id detected but does not show any drive in my computer.
Please advise if this tablet can come back to life. This has been a good tablet for last 5 months..
Thanks
Hi fellas.
This happened when i was unlocking bootloader of my Xperia Go. I installed SDK toolkit, adb drivers & 'android_winusb.inf' (as per the official bootloader guide) and started doing the process ahead. Initially the same problem (as happened with others also) started, the LED turned purple for some seconds then turned orange & went into charging mode (this happened in my laptop at home running windows 8.1, 64bit) then i did the same process with same drivers in my office comp (running windows XP, 32bit) then a prompt came up for installing my phone but installation failed. It asked me to go back and select custom folder, so i browsed to "comp>/C/>program files>android>android SDK>extras>google>usb_driver and clicked next, then it showed two paths with different names but reaching the same target folder viz "usb_driver" and i selected the 2nd one, after which it showed "installation complete". I thought i had resolved the problem but when i connected my phone holding volume Up key, the LED does turn purple (and stays like that all the way) but nothing comes up on computer further..... Can anybody tell what must have gone wrong and how this problem can be sorted out.
This is a kind request to all Modding Gurus PLEASE help me out,, I dont want to get stucked on the Stock ROM forever..:crying::crying:
Hi fellas.
This happened when i was unlocking bootloader of my Xperia Go. I installed SDK toolkit, adb drivers & 'android_winusb.inf' (as per the official bootloader guide) and started doing the process ahead. Initially the same problem (as happened with others also) started, the LED turned purple for some seconds then turned orange & went into charging mode (this happened in my laptop at home running windows 8.1, 64bit) then i did the same process with same drivers in my office comp (running windows XP, 32bit) then a prompt came up for installing my phone but installation failed. It asked me to go back and select custom folder, so i browsed to "comp>/C/>program files>android>android SDK>extras>google>usb_driver and clicked next, then it showed two paths with different names but reaching the same target folder viz "usb_driver" and i selected the 2nd one, after which it showed "installation complete". I thought i had resolved the problem but when i connected my phone holding volume Up key, the LED does turn purple (and stays like that all the way) but nothing comes up on computer further..... Can anybody tell what must have gone wrong and how this problem can be sorted out.
This is a kind request to all Modding Gurus PLEASE help me out,, I dont want to get stuck on the Stock ROM forever..:crying::crying:
Sorry if this is in the wrong forum but I didn't find a Pipo subforum.
My Pipo W3F keeps rebooting exactly like this fellow's https://www.youtube.com/watch?v=Dz_qsKDAq3A
Can anyone help? Thank You.
Has no one seen any tablet reboot like this at all, so you could at least point me in some direction?
I found out some things that may help you guys to help me.
This unit is Dual Boot between Android 4.4 and Windows 8.1 and used an Intel Bay Trail processor. In the American Megatrends bios I can choose to override current default boot settings which are ( UEFI: Built in EFI Shell) to UEFI OS and then Android will boot normally with all my data. What I cannot get to boot is Windows 8.1 no matter which option I try. If your Pipo custom OS Boot manager does not load ( the screen that lets you choose between Android and Windows on startup) you are supposed to hold down the Volume Up (plus) button while booting and the boot manager will load. I've used this trick before this rebooting happened once when the boot manager did not load and it worked fine. Now this trick won't work at all. I believe perhaps somehow this boot manager or the bios function that loads it is in error. I could be wrong, just my best guess.
I even tried a copy of Windows 8.1 on USB and was able to tell the bios to load the USB from startup. My hope was that it would recreate me a Windows Boot Manager and allow me to get into Windows at least by booting through the ISO, or try to repair windows boot problems but all it does is give me a blue screen that says it ran into an error, is collecting some info and restarts only to go into this same loop. It nevers loads the ISO setup properly to even try to fix Windows boot problems.
Does this help you guys ?
Hello, I was using my phone the other day then out of nowhere the screen went black and will no longer turn. I have attempted the recovery and also the download menu but still no response. If i connect the device to my PC via USB and hold it the power button it shows up a device with the name Exynos8890 but that disappears seconds later.
Hope someone can help because the phone is no longer under warranty unfortunately thank you to anyone who post in advance.
Sound like your emmc chip memory is broken , but if you are using Windows 32 bit system or if your pc support Virtualization , instal Win 7 32 bit on your virtual machine and follow this post from zogu .
https://forum.xda-developers.com/galaxy-s6/general/guide-repair-hard-bricked-devices-t3573865
I have the sm-g935a and I used a modified version of Odin to install a root and it said it passed and started to reboot and now it just flash's the start up screen. I tried flashing the original firmware but laptop doesn't recognize it anymore