Related
Hello....i rooted my sm-g360az samsung phone and when i restarted the phone, it didn't boot up to the home screen. It shows the samsung logo and then becomes blank....i later on came to know on the internet that i hadnt enabled 'oem unlock' on 'developer options' before rooting. I sent the phone to samsung for repair and they sent it back to me today saying that the phone is beyond repair because it was rooted, though i hadnt mentioned to them that i had rooted the phone. How do i get my phone to work again? I need it very badly for work purposes. Can somebody help me with this....
You need to flash stock rom for your device via odin.
røbin said:
you need to flash stock rom for your device via odin.
Click to expand...
Click to collapse
hello robin....thanks for the reply my brother.....can you help me with links of the firmware files for sm-g360az brother? I searched on the iternet, but im unable to find them for free....
alvcross said:
hello robin....thanks for the reply my brother.....can you help me with links of the firmware files for sm-g360az brother? I searched on the iternet, but im unable to find them for free....
Click to expand...
Click to collapse
It is hard to find stock firmware for your device but check this linkhttp://www.easy-firmware.com/index.php?a=browse&b=category&id=3228 Did you visited this page?
røbin said:
it is hard to find stock firmware for your device but check this linkhttp://www.easy-firmware.com/index.php?a=browse&b=category&id=3228 did you visited this page?
Click to expand...
Click to collapse
yes my brother....i did visit that page before.....but it says that downloads are available only to paid users....
alvcross said:
yes my brother....i did visit that page before.....but it says that downloads are available only to paid users....
Click to expand...
Click to collapse
https://samsung-firmware.org/model/SM-G361F/ both device have same spec.So you can try this version.
røbin said:
https://samsung-firmware.org/model/sm-g361f/ both device have same spec.so you can try this version.
Click to expand...
Click to collapse
ohhh wooowww....thank you soo soo soo very much my brother.....but will this cause any problems to the sm-g360az phone?
alvcross said:
ohhh wooowww....thank you soo soo soo very much my brother.....but will this cause any problems to the sm-g360az phone?
Click to expand...
Click to collapse
Can't 100% guarantee you that it will work or not.Both device have same spec so it should work but one have 2mp font camera and other have 1.9mp camera. It shouldn't be a big problem I think.
And can you also tell me weather you were taking about sm-g361f or sm-g360f brother? Can you mention the exact model number I should try flashing with? THERE ARE MANY MODELS IN SM-G360....WHICH ONE WOULD SUIT THE BEST BROTHER?
alvcross said:
And can you also tell me weather you were taking about sm-g361f or sm-g360f brother? Can you mention the exact model number I should try flashing with? THERE ARE MANY MODELS IN SM-G360....WHICH ONE WOULD SUIT THE BEST BROTHER?
Click to expand...
Click to collapse
All the version are same.Those files are from different region. So you can choose any region.but download lte version only.
røbin said:
all the version are same.those files are from different region. So you can choose any region.but download lte version only.
Click to expand...
Click to collapse
ohhh....wowwww....okay my brother....ill download the firmware...flash the files and let you know....thank you so very much for the help my brother....god bless you....
alvcross said:
ohhh....wowwww....okay my brother....ill download the firmware...flash the files and let you know....thank you so very much for the help my brother....god bless you....
Click to expand...
Click to collapse
Don't just say thanks.Hit the thanks button If you thik I helped you
røbin said:
don't just say thanks.hit the thanks button if you thik i helped you
Click to expand...
Click to collapse
yes my brother....i did just that....i downloaded the firmware files and tried to flash with odin....but the flash doesnt proceed....it gets stuck in initialization cause of the locked bootloader....i hadnt enabled 'oem unlock' when the phone was working....and also in the download mode it shows 'secureboot - enabled'.....so the locked bootloader is not allowing odin to flash.....the phone is being recognized by adb and it shows up with a serial number as recovery in the adb console....is there any way i could enable oem unlock and unlock the bootloader through adb commands?
alvcross said:
yes my brother....i did just that....i downloaded the firmware files and tried to flash with odin....but the flash doesnt proceed....it gets stuck in initialization cause of the locked bootloader....i hadnt enabled 'oem unlock' when the phone was working....and also in the download mode it shows 'secureboot - enabled'.....so the locked bootloader is not allowing odin to flash.....the phone is being recognized by adb and it shows up with a serial number as recovery in the adb console....is there any way i could enable oem unlock and unlock the bootloader through adb commands?
Click to expand...
Click to collapse
You need to install twrp via odin and from twrp you need to do a full factory reset(data,cache,delvik,phone memory).after that try again to flash stock rom via odin.Here is the twrp link for your device http://teamw.in/devices/samsunggalaxycoreprimequalcomm.html
Røbin said:
You need to install twrp via odin and from twrp you need to do a full factory reset(data,cache,delvik,phone memory).after that try again to flash stock rom via odin.Here is the twrp link for your device http://teamw.in/devices/samsunggalaxycoreprimequalcomm.html
Click to expand...
Click to collapse
Oh my god.....wonder of wonders my brother.....i downloaded TWRP from the link you gave me and flashed it with odin and to my surprise the phone booted up to the home screen after flashing was done.....the phone is back and working now.....wooowwwww.....thank you soooo soooo soooo very much my brother.....this forum needs many good hearted and wonderful people like you....Words cant express how happy I am.....thank you....thank you....thank you my brother....:victory:
alvcross said:
Oh my god.....wonder of wonders my brother.....i downloaded TWRP from the link you gave me and flashed it with odin and to my surprise the phone booted up to the home screen after flashing was done.....the phone is back and working now.....wooowwwww.....thank you soooo soooo soooo very much my brother.....this forum needs many good hearted and wonderful people like you....Words cant express how happy I am.....thank you....thank you....thank you my brother....:victory:
Click to expand...
Click to collapse
I'm also very happy that I helped you and Now you get your bricked phone back to normal.
Røbin said:
I'm also very happy that I helped you and Now you get your bricked phone back to normal.
Click to expand...
Click to collapse
but there is still some problem brother.....after flashing twrp 3 with odin the phone booted up to the home screen anad all my apps and settings were intact....but when i restarted the phone again....it showed the boot screen and then went blank.....i reflashed the twrp with odin again and it booted up to the home screen.....this time I MADE A FACTORY RESET AND AGAIN THERE WAS THE SAME PROBLEM.....PHONE WAS NOT BOOTING UP TO THE HOME SCREEN.....I REFLASHED TWRP AGAIN....BOOTED UP TO HOME SCREEN AND TRIED SOFTWARE UPDATES....BUT I GOT A MESSAGE SAYING THAT THE PHONE WAS MODIFIED IN AN UNAUTHORIZED WAY AND THAT I COULD TRY USING KIES FOR UPDATES.....
THE BOOTLOADER SEEMS TO BE DAMAGED.....CAN YOU TELL ME HOW TO UNLOCK THE BOOTLOADER WITH ADB BROTHER? WHEN I TYPE REBOOT RECOVERY THROUGH ADB, THE PHONE REBOOTS AND WHEN IT COMES TO THE TWRP RECOVERY SCREEN, IT TURNS BLANK....SO IM UNABLE TO GO INTO TWRP TO WIPE SOME STUFF AS YOU HAD SUGGESTED EARLIER....SHOULD I TRY CWM?
alvcross said:
but there is still some problem brother.....after flashing twrp 3 with odin the phone booted up to the home screen anad all my apps and settings were intact....but when i restarted the phone again....it showed the boot screen and then went blank.....i reflashed the twrp with odin again and it booted up to the home screen.....this time I MADE A FACTORY RESET AND AGAIN THERE WAS THE SAME PROBLEM.....PHONE WAS NOT BOOTING UP TO THE HOME SCREEN.....I REFLASHED TWRP AGAIN....BOOTED UP TO HOME SCREEN AND TRIED SOFTWARE UPDATES....BUT I GOT A MESSAGE SAYING THAT THE PHONE WAS MODIFIED IN AN UNAUTHORIZED WAY AND THAT I COULD TRY USING KIES FOR UPDATES.....
THE BOOTLOADER SEEMS TO BE DAMAGED.....CAN YOU TELL ME HOW TO UNLOCK THE BOOTLOADER WITH ADB BROTHER? WHEN I TYPE REBOOT RECOVERY THROUGH ADB, THE PHONE REBOOTS AND WHEN IT COMES TO THE TWRP RECOVERY SCREEN, IT TURNS BLANK....SO IM UNABLE TO GO INTO TWRP TO WIPE SOME STUFF AS YOU HAD SUGGESTED EARLIER....SHOULD I TRY CWM?
Click to expand...
Click to collapse
If locked bootloader causing this problem than you might want to try this http://unlock-bootloader.net/how-to/unlock-bootloader-samsung-galaxy-core-prime/ Follow the guide and unlock bootloader to see if this problem solve for good.
There is Android Marshmallow custom rom for your device too
Røbin said:
If locked bootloader causing this problem than you might want to try this http://unlock-bootloader.net/how-to/unlock-bootloader-samsung-galaxy-core-prime/ Follow the guide and unlock bootloader to see if this problem solve for good.
There is Android Marshmallow custom rom for your device too
Click to expand...
Click to collapse
thanks for the link brother.....but that website is a fake website with fake android 6 custom rom links....
brother....do you have a SM-G360AZ MOBILE? CAN YOU INSTALL FLASHIFY ON YOUR PHONE AND TAKE A BACKUP IMAGE OF THE STOCK RECOVERY AND UPLOAD A LINK HERE....
TWRP IS NOT WORKING....THE PHONE REACHES RECOVERY AND THEN TURNS BLANK....
alvcross said:
thanks for the link brother.....but that website is a fake website with fake android 6 custom rom links....
brother....do you have a SM-G360AZ MOBILE? CAN YOU INSTALL FLASHIFY ON YOUR PHONE AND TAKE A BACKUP IMAGE OF THE STOCK RECOVERY AND UPLOAD A LINK HERE....
TWRP IS NOT WORKING....THE PHONE REACHES RECOVERY AND THEN TURNS BLANK....
Click to expand...
Click to collapse
Why do you need stock recovery?There's no stock recovery available for your device.Try to instell different twrp version for your phone.
I downgraded to run kingroot, installed twrp, and then CM11
Worked fine, but I wasnt happy with some of the issues that CM11 has currently so I flashed 5.3.1.0 from twrp and its working fine but I dont have root (not that big a deal) and I cant get to recovery mode, not by doing adb reboot recover or by holding the volume button at poweron. Any idea where to start?
wfg97079 said:
I downgraded to run kingroot, installed twrp, and then CM11
Worked fine, but I wasnt happy with some of the issues that CM11 has currently so I flashed 5.3.1.0 from twrp and its working fine but I dont have root (not that big a deal) and I cant get to recovery mode, not by doing adb reboot recover or by holding the volume button at poweron. Any idea where to start?
Click to expand...
Click to collapse
Not having root is a great deal, cause with root you could have used a certain tutorial got get TWRP back and flash whatever. I'm in a similar situation, no root too, and can't figure out what to do
Thanks
Killa8 said:
Not having root is a great deal, cause with root you could have used a certain tutorial got get TWRP back and flash whatever. I'm in a similar situation, no root too, and can't figure out what to do
Click to expand...
Click to collapse
Yes if I had root I could fix it, I just meant in the end I don't need the device to be rooted, just want some kind of recovery just in case
well
I now have root, what tutorial can I use to get a recovery back
Still stuck with no recovery
How did you get root back?
wfg97079 said:
I now have root, what tutorial can I use to get a recovery back
Click to expand...
Click to collapse
How did you get root back if you aren't on 4.5.3???
Mintzeh said:
How did you get root back if you aren't on 4.5.3???
Click to expand...
Click to collapse
Yeah, I would like to know as well. Did almost the same as you. Have no recovery and cant fastboot anything to the kindle. Says hardware locked. Tried Kingoroot again and takes a long time. At 80% gives me root failed.
How u get it to connect adb? Plse help
plugged it in and when changed the driver to android adb. when you plug it in, does it register as anything?
kingroot 5.3.1.0
I used kingroot and am on 5.3.1.0 and stuck with no recovery
Mintzeh said:
How did you get root back if you aren't on 4.5.3???
Click to expand...
Click to collapse
I got this device used and it had been updated to the newest firmware. It would not work with Kingroot, Framaroot, SRS, or Kingo. The only option was to attempt to downgrade to an older firmware with unpatched exploits. The Verizon J1 has a locked bootloader so it cannot flash full firmware packages with older bootloaders. Luckily it can be downgraded to older firmware of the same android version with older kernel. I just had to unpack the firmware and remove the bootloader and repack. I tried to make a rooted stock firmware but can't seem to repack the system.img.ext4 properly after mounting it.
Now let's get down to business
1. Download Odin 3.09
2. Download modified (by me) rootable firmware. Do not rename file it might mess up md5sum.
3. Boot phone to download mode. Hold power+vol down+ home.
4. Start Odin and connect phone with original factory sync cable.
5. Click on the AP button and select the firmware downloaded above. It will check the md5sum automatically when it finishes and passes then press the start button. Once the flash finishes it will reboot.
6. Enable usb debugging.
7. Download Kingoroot for PC (google) and let it run. The apk will not work to root. It should install drivers automatically.
8. Profit!!
I'm testing a method to reliably switch to Supersu but having trouble updating binary 100% of the time. I've tried to flash exposed but Flashfire doesn't seem to work properly with this device. If anyone can suggest a workaround please share.
OP, is it okay if I don't have original factory sync cable in hands?
volibyro said:
OP, is it okay if I don't have original factory sync cable in hands?
Click to expand...
Click to collapse
Yeah its ok you just run into less issues with original cable.
**Working on updating links I have a slow upload speed though.
HideTheCookies said:
I got this device used and it had been updated to the newest firmware. It would not work with Kingroot, Framaroot, SRS, or Kingo. The only option was to attempt to downgrade to an older firmware with unpatched exploits. The Verizon J1 has a locked bootloader so it cannot flash full firmware packages with older bootloaders. Luckily it can be downgraded to older firmware of the same android version with older kernel. I just had to unpack the firmware and remove the bootloader and repack. I tried to make a rooted stock firmware but can't seem to repack the system.img.ext4 properly after mounting it.
Now let's get down to business
1. Download Odin 3.09
2. Download modified (by me) rootable firmware. Do not rename file it might mess up md5sum.
3. Boot phone to download mode. Hold power+vol down+ home.
4. Start Odin and connect phone with original factory sync cable.
5. Click on the AP button and select the firmware downloaded above. It will check the md5sum automatically when it finishes and passes then press the start button. Once the flash finishes it will reboot.
6. Enable usb debugging.
7. Download Kingoroot for PC (google) and let it run. The apk will not work to root. It should install drivers automatically.
8. Profit!!
I'm testing a method to reliably switch to Supersu but having trouble updating binary 100% of the time. I've tried to flash exposed but Flashfire doesn't seem to work properly with this device. If anyone can suggest a workaround please share.
Click to expand...
Click to collapse
If u want to switch to SuperSu from KingoROOT, the best and easiest method would be backing up ur phone and performing a soft reset. Afterwards simply install SuperSu, the superuser binary is already installed from kingroot - no worries, just update it normally via SuperSU and disable KNOX after the update is complete.
That switch idea of yours might get you bricked
Confirmed it works now we need a recovery so we can just flash su
SuperSUme works really really well lol, this phone is 32bit only any1 wanna try 4 a recovery?
Thxx bro
I've tried porting a few times from the j100h twrp and keep getting a return to Verizon dealer screen. So I'd assume the bootloader is still locked. Im going to try the old safestrap and see if i can't get that working. But im kinda a noob so I'll do my best.
p.s. Don't try flashing any recovery until you backup your current one with rashr or flashify.BE SAFE.btw I've yet to see supersume actually work but hey it could happen. I'd much rather just flash the su from a recovery.
gravyd316 said:
I've tried porting a few times from the j100h twrp and keep getting a return to Verizon dealer screen. So I'd assume the bootloader is still locked. Im going to try the old safestrap and see if i can't get that working. But im kinda a noob so I'll do my best.
p.s. Don't try flashing any recovery until you backup your current one with rashr or flashify.BE SAFE.btw I've yet to see supersume actually work but hey it could happen. I'd much rather just flash the su from a recovery.
Click to expand...
Click to collapse
Agreed about flashing the recovery, but you need to be rooted with KingOroot to get SuperSUme to work, & it helps to just keep the screen timeout turned off thru this process , after it says "complete" I downloaded SuperSU & installed, updated, "disabled" knox, & I can also use flashfire although its pretty worthless for anything other than backups, as the little AROMA shell emulator thingy does run after the verizon logo is showing, which indicates to me yea its locked down pretty solid lol.
I tried Safestrap & it gave me a /SS folder in my /etc so I looked into that but I can't manage to figure out how I should go placing the files to make it work lol. But i do know this thing is 32bit ONLY, so compiling the j100H twrp for instance will NOT flash no matter what we do to the bootloader, it will bootloop since the architecture is for a 64bit SoC, we need someone to compile the j100H twrp in a 32bit only compatible architecture, & then you can easily flash it like cake, & TWRP should do the rest like all other Samsung phones O.O
its gotten to the point these are all the apps I have when i restore haha, if you wanna PM me about working together to get this thing a little more flexible I'm always open to ideas . I only use this thing as a hotspot but would totally like to see a recovery at least make it over & from there I could definitely start the ROM bringup
Will I get bricked by doing this with Verizon
Weegee1 said:
Will I get bricked by doing this with Verizon
Click to expand...
Click to collapse
you cant hard brick this device, restore with ODIN start over.
LilAnt530 said:
you cant hard brick this device, restore with ODIN start over.
Click to expand...
Click to collapse
I did it. I keep getting a notification that SE for Android has been turned off. What do I do
Weegee1 said:
I did it. I keep getting a notification that SE for Android has been turned off. What do I do
Click to expand...
Click to collapse
Download any terminal app & type in 'su' then 'setenforce 1'
---------- Post added at 12:42 AM ---------- Previous post was at 12:41 AM ----------
Weegee1 said:
I did it. I keep getting a notification that SE for Android has been turned off. What do I do
Click to expand...
Click to collapse
Download any terminal app & type in 'su' then 'setenforce 1' and you should be good.
LilAnt530 said:
Download any terminal app & type in 'su' then 'setenforce 1'
---------- Post added at 12:42 AM ---------- Previous post was at 12:41 AM ----------
Download any terminal app & type in 'su' then 'setenforce 1' and you should be good.
Click to expand...
Click to collapse
THANKS! sorry last noob question, will I lose root if I turn my phone off
Weegee1 said:
THANKS! sorry last noob question, will I lose root if I turn my phone off
Click to expand...
Click to collapse
Haha believe it or not that's a pretty reasonable question! xD, you shouldn't, i cannot see why, if you have problems just restore i will help ya through it again, & if you want xposed ONLY use the material installer from xda
LilAnt530 said:
Haha believe it or not that's a pretty reasonable question! xD, you shouldn't, i cannot see why, if you have problems just restore i will help ya through it again, & if you want xposed ONLY use the material installer from xda
Click to expand...
Click to collapse
I'll get Xposed another time. I turned off my phone a couple times but the root stayed so that's a plus :victory:
Weegee1 said:
I'll get Xposed another time. I turned off my phone a couple times but the root stayed so that's a plus :victory:
Click to expand...
Click to collapse
If you havent used SUPERSUme to transfer it over to SuperSU, google the app, can't find the free one on play store anymore i guess.
LilAnt530 said:
If you havent used SUPERSUme to transfer it over to SuperSU, google the app, can't find the free one on play store anymore i guess.
Click to expand...
Click to collapse
And with SuperSU, is that one more stable
Hi guys, I've started using a SGS2 but it has broken volume button. I install TWRP and flash RR built by @linusdan. Then I install substratrum theme and swiftblack theme. Then I was too lazy to uninstall the theme via the app and I flashed the rescue package in my phone's internal memory and it's bootloop, I've already tried adb, I typed "adb reboot recovery" and it just stuck like that.By the way, my SGS2 also have a problem with the usb port, when I plug in to charge, it know that I'm charging but the battery won't get anymore precent, I tried with another usb board but it doesn't work and when I plug it to my pc, I have to put its screen head down so the PC can detect it. Can anyone help me out? Thanks in advance
vdhero said:
Hi guys, I've started using a SGS2 but it has broken volume button. I install TWRP and flash RR built by @linusdan. Then I install substratrum theme and swiftblack theme. Then I was too lazy to uninstall the theme via the app and I flashed the rescue package in my phone's internal memory and it's bootloop, I've already tried adb, I typed "adb reboot recovery" and it just stuck like that.By the way, my SGS2 also have a problem with the usb port, when I plug in to charge, it know that I'm charging but the battery won't get anymore precent, I tried with another usb board but it doesn't work and when I plug it to my pc, I have to put its screen head down so the PC can detect it. Can anyone help me out? Thanks in advance
Click to expand...
Click to collapse
I've never been in this situation. I dont know how to help you. Sorry.
Tip: buy another device
linusdan said:
I've never been in this situation. I dont know how to help you. Sorry.
Tip: buy another device
Click to expand...
Click to collapse
I did bougat another device, a nokia1 and a note 8 but both of them don't have roms or anything I can play with, the s2 has plenty of roms. I can't live without installing custom roms and tweaks. I have an idea, I can wipe the data with adb, do you know how to wipe system with adb? As without os, the phone will be forced to boot into recovery.
vdhero said:
As without os, the phone will be forced to boot into recovery.
Click to expand...
Click to collapse
Look here:
- https://www.youtube.com/watch?v=BxpFqyFq0Jw
- https://www.youtube.com/watch?v=47Vy1KcbWh0
- https://forum.xda-developers.com/showpost.php?p=71481676&postcount=587
- https://www.youtube.com/watch?v=1F6C13O76qk
toy_story said:
Look here:
-
-
- https://forum.xda-developers.com/showpost.php?p=71481676&postcount=587
-
Click to expand...
Click to collapse
Thanks dude, I'll try out but I'll flash the cwm then flash twrp. I've ordered a repair kit and the sgs2 volume button.BTW , my sgs2 has a problem with usb/charging/whatever. When I plug it in, it say that it's charging but the battery won't get anymore precent. If I connect it to the pc, I have to turn its face down, otherwise, pc won't detect it.
toy_story said:
Look here:
- https://www.youtube.com/watch?v=BxpFqyFq0Jw
- https://www.youtube.com/watch?v=47Vy1KcbWh0
- https://forum.xda-developers.com/showpost.php?p=71481676&postcount=587
- https://www.youtube.com/watch?v=1F6C13O76qk
Click to expand...
Click to collapse
Don't mind the post i posted before, I fixed the usb, it was a problem with the cable, I replaced the cable and every command in adb works, except adb reboot and adb reboot recovery. By some how, i typed ""adb shell" and then "recovery", I bring me to the PhilZ recovery and said : Powered by dorimanX kernel and I can't see any menu like wipe or anything. Do you have any idea?
Almost forgot, I wiped system with erase_image but it still won't boot to TWRP. And the PhilZ of the DorimanX kernel is a post recovery, I figured it out about that by somehow
Update: I tried to format kernel partition to see if it can force the phone boot to TWRP. After formatying, it still won't bring me to TWRP. Then I tried samsung 300k tool but phone no longer be detected by the pc. I tried to make my own usb jig without resistor as I couldn't find any resistor by using paper but no luck. I've found some good deal on the internet, I've ordered a pack that include 100 100k ohms for half a buck. I also ordered a usb jig from china for 2 bucks but it'll arrive after 1 month.
toy_story said:
Look here:
- https://www.youtube.com/watch?v=BxpFqyFq0Jw
- https://www.youtube.com/watch?v=47Vy1KcbWh0
- https://forum.xda-developers.com/showpost.php?p=71481676&postcount=587
- https://www.youtube.com/watch?v=1F6C13O76qk
Click to expand...
Click to collapse
So, after a few days, I made a usb jig same as how he made in the video but it doesn't work. I've done some research, and found a thread, it only work for GB bootloader but mine has ICS bootloader. Now,I'm trying to find a vulome button to replace. It's so hard to find replacement for this phone. BTW, thanks for helping me.
I've got some updates. The volume button never arrive. Then by some how, When I plugged my phone to charge, it started to boot into recovery and I reinstalled the ROM. Problem solved.
So after solving my problem, I decided to install stock ROM. I used the JIG and booted to DL Mode and install Stock rom you provided in the post. Then I realize that I can't reboot to recovery anymore. I tried some apps and it just reboot. I found that I need hardware button, so... do you have any idea ?
vdhero said:
do you have any idea ?
Click to expand...
Click to collapse
Hi, you now have the official android 4.1.2 installed!
1. Make root permissions - [ROOT] Framaroot, a one-click apk to root some devices
2. Set the - Shutdown Menu (ROOT)
And through the application of restart in the recovery, it's all simple.
3. You can install - [ROOT] Mobile ODIN v4.20
Good luck ...
toy_story said:
Hi, you now have the official android 4.1.2 installed!
1. Make root permissions - [ROOT] Framaroot, a one-click apk to root some devices
2. Set the - Shutdown Menu (ROOT)
And through the application of restart in the recovery, it's all simple.
3. You can install - [ROOT] Mobile ODIN v4.20
Good luck ...
Click to expand...
Click to collapse
Thank you very much, I'm back on LOS 14.1 now . But I can't mount my sdcard since I installed stock rom. I can't format it because I have lots of data inside and i still can mount it in other phones
So, I'm back on LOS 14.1, I also found a tip to install LOS 14.1 without getting the triagle, you can use the JIG to remove triagle but I found this one can help you not getting the triagle. As my phone's volume button is broken, I got myself a usb JIG to reboot to Download Mode. I install stock ROM(JB) with odin the I found that I couldn't install anything alse with odin. I decided to root my SGS2 with framaroot , then I installed mobile odin lite and FlashKernel. I downloaded the files from your help thread and flashed the IP kernel + CWM by using the mobile odin. Then I flashed files and Installed LOS 14.1. After a few hours using, I found that the triagle is gone.
BTW, can you share this post by quoting it to your help thread? That will help lots of people
linusdan said:
I've never been in this situation. I dont know how to help you. Sorry.
Tip: buy another device
Click to expand...
Click to collapse
Hi, I was not in that situation either, but I managed to help him.
You can never give up immediately, there must always be a belief that a miracle will happen and when this happens you are very pleased with yourself.
---------- Post added at 09:09 ---------- Previous post was at 08:59 ----------
vdhero said:
BTW, can you share this post by quoting it to your help thread?
Click to expand...
Click to collapse
You can write yourself a detailed instruction here - https://forum.xda-developers.com/ga...g-clean-loss-data-installation-t3712409/page5
That will help lots of people!
toy_story said:
Hi, I was not in that situation either, but I managed to help him.
You can never give up immediately, there must always be a belief that a miracle will happen and when this happens you are very pleased with yourself.
Click to expand...
Click to collapse
Okay, I overdid it when I told him to buy another device, but I was honest when I said I couldn't help.
I'm glad you managed to help
So, I've just remembered that my phone is a Korean version and the code is SHW-M250S, I found that it has NFC and DMB-T. When I bought the phone, the old owner did helped me to convert it to I9100, now I wanted to see if
NFC and DMB-T. I going to install SHW-M250S stock ROM. Can anyone tell me if I can install I9100's ROM in SHW-M250S without converting it to I9100?
I posted my rooted J6 last year: https://forum.xda-developers.com/t/...-updated-magisk-and-now-got-bootloop.4464235/
And I left it untouched for months now, but I still want to save it
I can only go to the recovery mode (I didn't install TWRP before rooting my phone ( That was a lesson for me)
I wanted to reflash the stock ROM (already had it) but my laptop & ADB didn't detect my phone since I wiped everything on the phone, even the ROM.
Can anyone please help me?
MnTri said:
I posted my rooted J6 last year: https://forum.xda-developers.com/t/...-updated-magisk-and-now-got-bootloop.4464235/
And I left it untouched for months now, but I still want to save it
I can only go to the recovery mode (I didn't install TWRP before rooting my phone ( That was a lesson for me)
I wanted to reflash the stock ROM (already had it) but my laptop & ADB didn't detect my phone since I wiped everything on the phone, even the ROM.
Can anyone please help me?
Click to expand...
Click to collapse
You're using Windows?
ethical_haquer said:
You're using Windows?
Click to expand...
Click to collapse
Yep. Windows 10
MnTri said:
Yep. Windows 10
Click to expand...
Click to collapse
If you have access to a Linux computer let me know, otherwise, I will try and fix it with you on Windows.
Well I only use Windows and I'm at school for now. I did have a Kali Linux on USB though
MnTri said:
Well I only use Windows and I'm at school for now. I did have a Kali Linux on USB though
Click to expand...
Click to collapse
First, download the latest Samsung drivers from developer.samsung.com and install them.
Let me know if you need help with this step.
ACCIDENTAL
ethical_haquer said:
First, download the latest Samsung drivers from developer.samsung.com and install them.
Let me know if you need help with this step.
Click to expand...
Click to collapse
I downloaded samsung drivers and odin on my laptop already. So it could recognize my phone & i could root my phone at first
MnTri said:
I downloaded samsung drivers and odin on my laptop already. So it could recognize my phone & i could root my phone at first
Click to expand...
Click to collapse
MnTri said:
I can only go to the recovery mode
Click to expand...
Click to collapse
You still have a recovery, is it stock or custom?
Stock
ethical_haquer said:
You still have a recovery, is it stock or custom?
Click to expand...
Click to collapse
MnTri said:
Stock
Click to expand...
Click to collapse
But you still can't connect your phone to your computer?
UPDATING MY PHONE (27TH.3.2023)
So basically I bought the new cable to connect it to computer, and it seems to work now [I knew it because I heard the Windows connecting sound]. But it wouldn't show Samsung J6 folder on computer for now. And I'm in the situation that when I pressed wipe cache partition in the recovery mode it would show:
E:[PDP] lstat /c____/pdp_b__ : 0 - No PDP scenarioI haven't tried going to the safe mode, but with the fact that I'm still stuck at the recovery mode right now (or reboot again and get bootloop) and it seems no one has the answer to the No PDP scenario right now, I don't really know what to do next
UPDATE AGAIN, IT'S ALL GOOD NOW (29TH.3.2023)
With my new cable, I just need to connect my phone to PC, open Odin again and flash ROM, that's it. My phone now is not rooted anymore but I don't think I want to root ever again. Still can't understand how I literally just updated Magisk and restarted my phone and...BOOM, got boot loop.
MnTri said:
UPDATE AGAIN, IT'S ALL GOOD NOW (29TH.3.2023)
With my new cable, I just need to connect my phone to PC, open Odin again and flash ROM, that's it. My phone now is not rooted anymore but I don't think I want to root ever again. Still can't understand how I literally just updated Magisk and restarted my phone and...BOOM, got boot loop.
Click to expand...
Click to collapse
Nice! If this thread is done, put "[RESOLVED]" in the title. That way people will click on on it to get help, not help you.