Related
I've searched everywherem nothing worked, can some plz tell me how to put my vibrant in DL Mode so i can restore with odin3
Kennii said:
I've searched everywherem nothing worked, can some plz tell me how to put my vibrant in DL Mode so i can restore with odin3
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=749413
if that doesn't work...
From here.. http://forum.xda-developers.com/showthread.php?t=848737
1. Get into Download Mode (WITH THE PHONE PLUGGED IN) by following the steps below
*Turn off the phone until you get to the charging battery screen (keep in mind, your phone is currently PLUGGED IN)
*Press volume up and down, and power all at once.
*As soon as the screen turns black, release your power button.
2. Unplug phone from USB
3. Open Odin (in Administrator if you're running W7 or Vista), try one of the ones I attached to this post, at least one of them is bound to work, some don't work for me, but works for others, some doesn't work for others, but works for me, whatever floats your boat
4. Load in the files into Odin that you have downloaded from above Just load in the files corresponding to the text field.
DO NOT CHECK REPARTITION.
5. Plug in your phone with the DL mode
6. Click start and wait for the magic
i can get into recovery mode but not dl mode, an my pc never recognized my phone via usb even when android worked
Kennii said:
i can get into recovery mode but not dl mode, an my pc never recognized my pc via usb even when android worked
Click to expand...
Click to collapse
Try my how-to...
Also, try pulling the battery, and then holding the Vol up+Vol dn keys, plug the usb cable in, then plug the battery back in..., make sure the usb cable is plugged into your computer...
Or.., if your phone is partially booting, then:
Code:
adb reboot download
i cant "power off" phone cause i cant boot android
Kennii said:
i cant "power off" phone cause i cant boot android
Click to expand...
Click to collapse
10 seconds: hold power...
When the phone reboots to the Vibrant screen...
Press and hold: Vol up+Vol Dn+Power....
Wait for the Vibrant screen to reboot again...
Release Power... Download mode...
* Unfortunately, sounds like you've never setup adb or the sdk. I would recommed this...
i think i have a hardware locked phone, i just got it today.
But i can get into recovery mode via hardware, so maybe i dont have hardware locked? and it IS possible to get to download mode on my phone via the buttons right?
Kennii said:
i think i have a hardware locked phone, i just got it today.
But i can get into recovery mode via hardware, so maybe i dont have hardware locked? and it IS possible to get to download mode on my phone via the buttons right?
Click to expand...
Click to collapse
Try here too, if that doesn't work for you...don't know what to tell you other than keep trying, you'll get in...
dasunsrule32 said:
10 seconds: hold power...
When the phone reboots to the Vibrant screen...
Press and hold: Vol up+Vol Dn+Power....
Wait for the Vibrant screen to reboot again...
Release Power... Download mode...
* Unfortunately, sounds like you've never setup adb or the sdk. I would recommed this...
Click to expand...
Click to collapse
when i did this i got recovery mode i'll try again.
where can i install this "adb" or "sdk" which ever ones easier?
Kennii said:
when i did this i got recovery mode i'll try again.
where can i install this "adb" or "sdk" which ever ones easier?
Click to expand...
Click to collapse
http://developer.android.com/sdk/index.html
1. Turn off device
2. Remove battery
3. Hold Vol up and Vol down (works best upside down)
4. Insert battery into device
5. Plug USB cable into device (also plugged into your computer)
Voila, Should enter download mode. Good luck!
and then what?
don't i need the pc to recognize my phone for this to work? and how would i do that if im stuck on the vibrant screen?
cvibe88 said:
1. Turn off device
2. Remove battery
3. Hold Vol up and Vol down (works best upside down)
4. Insert battery into device
5. Plug USB cable into device (also plugged into your computer)
Voila, Should enter download mode. Good luck!
Click to expand...
Click to collapse
when i do that the vibrant screen comes up and stays there
Kennii said:
and then what?
don't i need the pc to recognize my phone for this to work? and how would i do that if im stuck on the vibrant screen?
Click to expand...
Click to collapse
If you follow the steps your phone will enter download mode, In order for your PC to recognize what kind of device is plugged into it you need the samsung drivers. Which are here http://forum.xda-developers.com/showthread.php?t=728929
But im stuck on vibrant screen no OS is loaded
Kennii said:
But im stuck on vibrant screen no OS is loaded
Click to expand...
Click to collapse
Right, it sounds like you had a bad flash and your phone is stuck during boot
cvibe88 said:
Right, it sounds like you had a bad flash and your phone is stuck during boot
Click to expand...
Click to collapse
yes, so is that fixable?
Yeah definitely fixable, You just need to install the Samsung drivers onto your PC. Use Odin to flash a stock ROM onto your device and things should be better for you. I would suggest doing some research here on XDAand getting familiar with flashing a phone. Ive recovered from where you are now(a long time ago) this phone is very resilient. I have a thread over in the Q&A section with links to a video tutorial that I made for flashing a phone from stock, rooting, then all the way up to nero. Do a search on it, Good luck!
i just need to get into need to get into download mode and get odin to recongnize my phone and i should be good, it's such a pain! ;(. But THANKS for your help! I wish theres just ONE way to get into download mode.
Hey,
I have a problem. My tablet is SGP312 has Cyanogenmod 11 (FXP247 - Android 4.4). It was bricked when I type in Terminal:
Code:
su
reboot recovery
Was turned off and will not turn on at all.
Power button = NOTHING
Power button + Vol(+) 3/10/25 secs = NOTHING
Power button + Vol(-) 3/10/25 secs = NOTHING
Power button + Voll(+) + USB = NOTHING
No LED light, It's literally a paperweight. I can't even put it into Flashmode.
Please help me!
Anyone can help me?
WeRunTheNite said:
Anyone can help me?
Click to expand...
Click to collapse
Are you sure u can't put it in to flash mode, because that's the first thing I would do
Try putting it into fast boot mode
Hold volume up button and keep holding it and connect it to the pc
If you see blue light on your tablet, it means it has successfully entered fast boot mode
Make sure all the drivers are installed
Or
Follow the following procedures
Install Sony Ericsson flash tool and install all the drivers
Hold volume down button and keep holding it and connect it to pc
Once you hear the connecting sound our Any notification on your pc saying that it is connected, go ahead and flash the ftf file
hassanman1997 said:
Are you sure u can't put it in to flash mode, because that's the first thing I would do
Try putting it into fast boot mode
Hold volume up button and keep holding it and connect it to the pc
If you see blue light on your tablet, it means it has successfully entered fast boot mode
Make sure all the drivers are installed
Or
Follow the following procedures
Install Sony Ericsson flash tool and install all the drivers
Hold volume down button and keep holding it and connect it to pc
Once you hear the connecting sound our Any notification on your pc saying that it is connected, go ahead and flash the ftf file
Click to expand...
Click to collapse
When I hold volume up or volume down and connect it to PC, light turn on in red color. Flashtool says "device connected with usb debugging off" but tablet is off!
Driver
WeRunTheNite said:
When I hold volume up or volume down and connect it to PC, light turn on in red color. Flashtool says "device connected with usb debugging off" but tablet is off!
Click to expand...
Click to collapse
in my opinion, the drivers are not correctly installed
http://developer.sonymobile.com/downloads/drivers/xperia-tablet-z-sgp311-sgp312-driver/
go to the website and download and load the drivers on your pc
its just weird that it says device connected with Usb debugging off when it is actually powered off
try charging your device, maybe the battery needs to be charged leave it there for atleast 30 mins then try the steps
let us know if you fixed it or not
hassanman1997 said:
in my opinion, the drivers are not correctly installed
http://developer.sonymobile.com/downloads/drivers/xperia-tablet-z-sgp311-sgp312-driver/
go to the website and download and load the drivers on your pc
its just weird that it says device connected with Usb debugging off when it is actually powered off
try charging your device, maybe the battery needs to be charged leave it there for atleast 30 mins then try the steps
let us know if you fixed it or not
Click to expand...
Click to collapse
I have a similar problem, I've flashed plenty of devices before, never briked a thing.
By unloking the bootloader the data partition of my brand new tablet Z went corrupted. I've tried to flash several firmware but none was succesfull (couldn't format data...), and finally it get totally bricked! no light, nothing... I was not even able to put it in flash mode (no light ever!).
I've tried after a while, I've read with some other Xperia devices, it would be possible to recover it after some time, by letting the battery die, then use some rubber trick to keep vol- pressed... you can find it in XDA forums what I'm talking about. However after a month my tablet was still dead. no light, no nothing!
I've sent it to warranty and the just said that "an alternative firmware was flashed" (voiding the warranty) "and has rendered the logic board unusable".... and they have to order a new unit!!
I feel so surprise that even the cheapest chinese tablet have an harware mode that allow to reflash and resuscitate it back to factory... even if the firmware is completely screwed, and a 600$ tablet for a simple bootloader unlock got totaly bricked.
I wonder if there is an "hardware" way to recover the tablet (I saw it's pretty easy to tear down the Xperia tablet Z), by directly accessing the NAND... or by accessing some PIN (well I know sony would have not leaked such information)
I know that this thread is more of same, but I didn't found any answer that helps me.
The story is:
My Xperia 2363 M4 Aqua Dual recived a call and I lost it. Then when I took it and turn on the screen to see the caller, my device just restarted and went to the purple waves screen, but stuck there the system didn't start. Since this, the only thing that phone do is that, it never starts the android system.
I've tried everything that I read
So the things I've tried is:
Restart the phone by holding the power + vol up buttons
Turn off the phone by holding the power + vol up buttons until 3 vibes
Turn on the phone holdin the vol up + vol down buttons
Reinstall software by xperia companion but the software didn't start the process
reinstall software by flashtool but the device isn't found by the flashtool
connect the phone on pc holding vol up button
connect the phone on pc holding vol down button
connect the phone on pc holding vol up + vol down buttons
connect the phone holding all the buttons
the fastboot and bootloader modes don't enter and the pc says that usb device can't recognized by the windows.
I have no ideas of what i do
Can you help me?
Does it flash a blue screen briefly before restarting / crashing?
DarkerJava said:
Does it flash a blue screen briefly before restarting / crashing?
Click to expand...
Click to collapse
Thanks for reply. No, didn't flash a blue screen, it just restarted like when we hold the power +vol up buttons
And it not keep restartin, the phone turns on and stays on the waves screen. don't start the system so as don't restart.
If you device is not being recognized by you PC, Try fastbooting the device using a linux (Mint, what i used for similiar issue), it will hopefully recognize your device and you would be able to flash it.
sanjyot said:
If you device is not being recognized by you PC, Try fastbooting the device using a linux (Mint, what i used for similiar issue), it will hopefully recognize your device and you would be able to flash it.
Click to expand...
Click to collapse
Thank You, I'll try this.
sanjyot said:
If you device is not being recognized by you PC, Try fastbooting the device using a linux (Mint, what i used for similiar issue), it will hopefully recognize your device and you would be able to flash it.
Click to expand...
Click to collapse
I tried this one, but, is the phone that not enter on fastboot mode. I tried with my another devices and it worked well, but the M4 aqua, just refuse to enter in fastboot mode and only recharge the batt. to be more specifc, the green or blue lights don't lights
korkinova said:
I tried this one, but, is the phone that not enter on fastboot mode. I tried with my another devices and it worked well, but the M4 aqua, just refuse to enter in fastboot mode and only recharge the batt. to be more specifc, the green or blue lights don't lights
Click to expand...
Click to collapse
could you fix that problem bro?
advancel said:
could you fix that problem bro?
Click to expand...
Click to collapse
Unfortunately no. I couldn't fix this yet, it is because I' can't go fastboot mode on my device
have you any other suggestion?
no i have that problem by the way if you can fix the prob. then contact me pls
The other phone you tried was a Xperia?
And are you on Win8 or Win10 because if you are, you have to install the drivers in unsafe mode(Don't remember how it's really called).
Furthermore if you don't have anything important in the phone try flashing a new version of Android or the same but do a clean install I.E Wipe everything and leave like new by installing with Flashtool(unsafe mode too, because it needs drivers if you are on Win8>10 when installing)
So i was using RessurectionRemix (a version from last month) and recovery twrp 3.1.0-0 and the phone was working great!
Yesterday i left my phone charging over night and in the morning i wake up to my phone bootlooping!
So i tried different things including everything it says here https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949 without luck
I can get it into recovery and fastboot but as soon as i let the key combination go the phone stops and just shows a black screen (screen is on) and i cant get into qualcomm recovery to flash!
And the only way to shut off the phone is by holding power + vol up + vol down!
Any solution or suggestions?
Use flashone method to unbrick
md07 said:
Use flashone method to unbrick
Click to expand...
Click to collapse
As i already mentioned i cant get into qualcomm recovery so i cant use flashone
try to flash fastboot rom from cucoco's.
Tsoler said:
As i already mentioned i cant get into qualcomm recovery so i cant use flashone
Click to expand...
Click to collapse
connect phone to computer, try force shutdown phone by hard button, ater phone shutdown, immediately release power but keep both volume. Phone maybe will enter Qualcomm flash dead mode, and Flashone will regconize com phone (refresh nedded)
Hope you success ! And believe, if a phone can flash with Qfil or Flashone, almost that phone never die (software)
Are you able to connect to the phone via Vysor, either via Chrome browser or as a standalone app on Windows PC when you do not see anything on the phone screen? Please post if Vysor install goes thru successfully. Hope your developer options/USB debugging are on. I assume your phone boots but may have display issues either hw or sw.
md07 said:
connect phone to computer, try force shutdown phone by hard button, ater phone shutdown, immediately release power but keep both volume. Phone maybe will enter Qualcomm flash dead mode, and Flashone will regconize com phone (refresh nedded)
Hope you success ! And believe, if a phone can flash with Qfil or Flashone, almost that phone never die (software)
Click to expand...
Click to collapse
Did what you said but nothing happens
kayyappan said:
Are you able to connect to the phone via Vysor, either via Chrome browser or as a standalone app on Windows PC when the you do not see anything on the phone screen? Please post if Vysor install goes thru successfully. Hope your developer options/USB debugging are on. I assume your phone boots but may have display issues either hw or sw.
Click to expand...
Click to collapse
Phone gets recognized but not long enough to do anything (windows makes sound but doesn't install anything and doesn't show up in device manager)
try this guide
https://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/
You have mentioned that you are able to see the device in recovery and fastboot till you release the buttons - does this mean if the buttons are held say in fastboot mode you are able to see the device via "fastboot devices" or in recovery the twrp screen or nothing ever shows up at all? Are the buttons clicking properly? Check individually to make sure - particularly the power button. Does it vibrate at any point of time when you press and hold the power button? Are you able to see any backlight when you say the screen is on?
If there no backlight shine a torch or sunlight from the side of the screen to see anything at all on the screen.
Vysor reports apk not installed when it attempts to download from PC to phone but fails. With Vysor you will have two windows one showing status of phone - this is the main window. The other is the mirrored one - that of the phone when you click view on the main window. I forgot that the phone requires approval to install the apk. Please see the attached thumbnails. Keep touching the screen about 3 cms up from the bottom of the screen (not the phone) to see any change. Hope your touch works.
I know it is quite frustrating to try a number of things. I recently went thru the same on Galaxy S4 to make sure the phone but for the screen works OK prior to ordering the screen. Besides in my case developer options was disabled and touch also did not work. It took about a week of learning and trying to see something on Vysor. I never have used a Sam phone till that time this broken phone was handed over to me.
After a lot of trying i found out that when i keep pressed power + vol down or vol up while connected to pc and device is off it gets recognized as
qualcomm hs-usb qdloader 9008 long as i keep the keys pressed so i tried the flashone method but it just says could not connect
Are Qualcomm drivers loaded on your computer? I have not used flashone. I used QPST to see if phone is connected. I am not sure if they are same.
kayyappan said:
You have mentioned that you are able to see the device in recovery and fastboot till you release the buttons - does this mean if the buttons are held say in fastboot mode you are able to see the device via "fastboot devices" or in recovery the twrp screen or nothing ever shows up at all? Are the buttons clicking properly? Check individually to make sure - particularly the power button. Does it vibrate at any point of time when you press and hold the power button? Are you able to see any backlight when you say the screen is on?
If there no backlight shine a torch or sunlight from the side of the screen to see anything at all on the screen.
Vysor reports apk not installed when it attempts to download from PC to phone but fails. With Vysor you will have two windows one showing status of phone - this is the main window. The other is the mirrored one - that of the phone when you click view on the main window. I forgot that the phone requires approval to install the apk. Please see the attached thumbnails. Keep touching the screen about 3 cms up from the bottom of the screen (not the phone) to see any change. Hope your touch works.
I know it is quite frustrating to try a number of things. I recently went thru the same on Galaxy S4 to make sure the phone but for the screen works OK prior to ordering the screen. Besides in my case developer options was disabled and touch also did not work. It took about a week of learning and trying to see something on Vysor. I never have used a Sam phone till that time this broken phone was handed over to me.
Click to expand...
Click to collapse
It doesn't stay long enough in recovery or fastboot to do anything it shuts off after a few seconds even with the buttons pressed after that it just shows a black screen
Phone vibrates when i press power and shows leeco logo (not os logo) and after 1-2 seconds screen goes black and phone vibrates again and shows leeco logo again and just continues looping
if i try to press power + vol up normally it goes into recovery but as soon as recovery is loaded screen goes black (screen on just doesn't show anything) the same goes for fastboot if i press power + vol down it loads fastboot but after 1-2 seconds screen goes black
if i keep pressing keys the phone just stays longer in recovery/fastboot but only 4-5 seconds
I assume you have adb and fastboot. Since you say the screen remains on when booting to recovery open a command prompt at the directory where adb is and issue a command "adb devices" without quotes. Does it just exit without showing any device or throws up some error? Try this irrespective of the black screen.
Have you looked at and tried what is given by @HTC-TYTN2 at post #8? It is for Le Max 2 and you will find a link to Quallcomm drivers too. Do not bother that the link mentions X820 even your Max 2 is 821, 829, etc.
since it happened after charging, you might want to check your cable and battery. best is to get a cheap usb multimeter.
Gesendet von meinem LEX820 mit Tapatalk
I too thought it could be the battery based on that's the screen goes off. But he also mentioned that the screen remains on but nothing to be seen after a short while. Wanted to suggest slow speed charging probably via a laptop usb as I'm not sure if he used high speed charging resulting in battery issue.
Did you solve the problem?
My phone just died completely! No response at all anymore. I'm contacting the seller now to send the phone back.
Looks like it is a hardware defect! A pretty odd one but nothing i can do anymore. I send it back and post what the problem is as soon as get any information.
Thanks to everyone who tried to help!
Tsoler said:
My phone just died completely! No response at all anymore. I'm contacting the seller now to send the phone back.
Looks like it is a hardware defect! A pretty odd one but nothing i can do anymore. I send it back and post what the problem is as soon as get any information.
Thanks to everyone who tried to help!
Click to expand...
Click to collapse
Try this:
https://www.androidfilehost.com/?w=files&flid=136823
download file, unzip, open folder, connect phone to USB via fastboot ( phone off phone + hold volume -) . Click to the flash app in your PC. The app should find the phone. Confirm TWRP problem -NO and start flash.
Drivers must be installed.
Drivers here.
https://uloz.to/!A6B4AmEVx87S/adbdriverinstaller-exe
I can, pass the cuoco rom by qfil? Another type of flash, because I can not access recovery and twrp ?, only by fastboot
RaphaBraga23 said:
I can, pass the cuoco rom by qfil? Another type of flash, because I can not access recovery and twrp , only by fastboot
Click to expand...
Click to collapse
Try this via fastboot mode.:
https://www.androidfilehost.com/?w=files&flid=136823
download file, unzip, open folder, connect phone to USB via fastboot ( phone off phone + hold volume -) . Click to the flash app in your PC. The app should find the phone. Confirm TWRP problem -NO and start flash.
Drivers must be installed.
Drivers here.
https://uloz.to/!A6B4AmEVx87S/adbdriverinstaller-exe
Hello guys, i have sony xz1 g431, i bricked my phone when i try to install another rom of another device via twrp. Now my phone no light when connect to pc, no light when charging, flash tool doesnt recognize my phone. When i connect my phone to pc it only shows QUSB_BULK on my pc. I think it lost fastboot or something. I try hold down button, up button or both when connect to pc but still no light and nothing happen.
Please help me fix this problem or atleast some good suggestions to solve this problem. I will really happy for that. Thanks :crying:
Just have the phone powered off, hold just only the volume down button and while holding it, connect the phone to usb cable to your PC.
It should enter flash mode (green light), where you can flash stock firmware via newflasher (or possibly also via flashtool, but I do not use that).
If you have the phone off, hold volume up button while connecting to usb, it should enter fastboot (blue light), which also may be used for some recovery, if the phone has been unlocked (or for the unlock itself).
If any of those modes are available, the phone should be possible to recover.
j4nn said:
Just have the phone powered off, hold just only the volume down button and while holding it, connect the phone to usb cable to your PC.
It should enter flash mode (green light), where you can flash stock firmware via newflasher (or possibly also via flashtool, but I do not use that).
If you have the phone off, hold volume up button while connecting to usb, it should enter fastboot (blue light), which also may be used for some recovery, if the phone has been unlocked (or for the unlock itself).
If any of those modes are available, the phone should be possible to recover.
Click to expand...
Click to collapse
i have tried it but there's no light. I think it's dead :crying:
@Karl Einstein, have you tried both ways as suggested above?
Maybe you can examine what usb device appear (if any) in each of the described modes (tried to enter flash mode, tried to enter fastboot mode, tried to just plug the phone to usb without holding any button from power off state).
What happens if you try to enter recovery mode (twrp) - having your phone powered off, without usb connection, holding volume down and power, should enter twrp if you had it flashed before.
Do you get any vibration when hold the power button and.volume.key.up?
Karl Einstein said:
Hello guys, i have sony xz1 g431, i bricked my phone when i try to install another rom of another device via twrp. Now my phone no light when connect to pc, no light when charging, flash tool doesnt recognize my phone. When i connect my phone to pc it only shows QUSB_BULK on my pc. I think it lost fastboot or something. I try hold down button, up button or both when connect to pc but still no light and nothing happen.
Please help me fix this problem or atleast some good suggestions to solve this problem. I will really happy for that. Thanks :crying:
Click to expand...
Click to collapse
Well...I think your phone is dead...I'm really sorry to say that, but in this case, that is the only reasonable explanation.
Yesterday I flashed the GSI image, then tried to flash to eXistenZ, it just stuck in the startup interface. However, it can still enter flash mode and fastboot mode, I have no choice but to use the newflasher to re-flash the firmware, it will return to normal.
In general, Sony devices are hard to change bricks, unless the phone is a Japanese carrier's custom phone (generally can not unlock the bootloader, and can only flash some firmware).
I have seen users who have flashed CE firmware for the docomo version and then can't enter flash mode and fastboot mode.Unlike your device,her phone is totally dead...It can't be charged, and there is no prompt to connect to the computer.
If you can buy a motherboard from eBay or somewhere else,you can disassemble your phone,then replace the old motherboard.
Hope these helps.
Thank you guys for all your support. Finally i decided to skip this problem and i will buy a new device
TimCrownie said:
Well...I think your phone is dead...I'm really sorry to say that, but in this case, that is the only reasonable explanation.
Yesterday I flashed the GSI image, then tried to flash to eXistenZ, it just stuck in the startup interface. However, it can still enter flash mode and fastboot mode, I have no choice but to use the newflasher to re-flash the firmware, it will return to normal.
In general, Sony devices are hard to change bricks, unless the phone is a Japanese carrier's custom phone (generally can not unlock the bootloader, and can only flash some firmware).
I have seen users who have flashed CE firmware for the docomo version and then can't enter flash mode and fastboot mode.Unlike your device,her phone is totally dead...It can't be charged, and there is no prompt to connect to the computer.
If you can buy a motherboard from eBay or somewhere else,you can disassemble your phone,then replace the old motherboard.
Hope these helps.
Click to expand...
Click to collapse
Just a side note , why flash existenz on a gsi rom... As it is made for stock Sony only or did I just misread something..
I had the same issue before on my lenovo p2 it lost fastboot and download mode but the PC detect it as qusb bulk then Qualcomm USB h9008 I searched all solutions but no good I think it needs some kind of box to push the modes or change the mother board. So I changed to Sony instead of repair it
Karl Einstein said:
Thank you guys for all your support. Finally i decided to skip this problem and i will buy a new device
Click to expand...
Click to collapse
Sad to ear that...
I had the same issue with my previous Htc10.
As it was still under warranty, I have had to contact HTC support and told them that and OTA bricked it.
They accepted the issue and replaced the motherboard.
I was BL unlocked, rooted and custom rom when it happened and no issue with support as they had no mean to prove it ?.
If still under warranty try to contact Sony support and tell them the same story... Ota bricks my phone ?
lilbrat said:
Just a side note , why flash existenz on a gsi rom... As it is made for stock Sony only or did I just misread something..
Click to expand...
Click to collapse
I've flashed eXistenZ before flash GSI in my phone. I thought GSI image would cover my origin ROM like eXistenZ, so after flash GSI image in,I flash eXistenZ again.
j4nn said:
Just have the phone powered off, hold just only the volume down button and while holding it, connect the phone to usb cable to your PC.
It should enter flash mode (green light), where you can flash stock firmware via newflasher (or possibly also via flashtool, but I do not use that).
If you have the phone off, hold volume up button while connecting to usb, it should enter fastboot (blue light), which also may be used for some recovery, if the phone has been unlocked (or for the unlock itself).
If any of those modes are available, the phone should be possible to recover.
Click to expand...
Click to collapse
I have the same issue. My sony xperia xz1 G8342 got sudden dead. (Before dead, I remember I disabled "Developer Mode"). Now its not response by any mean except charging sign when i connect to Power source or PC. Xperia Flashtool shows "device connected with USB debugging disabled".
So, How Can I enter flash mode or fastboot mode? Is My phone recoverable? Please Help.
Thanks
Yesterday I was struggling with my XZ1 Compact and came across this thread that gave me some light to get my mobile phone back.
I guess it's way late for Karl now but just in case, I'm sharing my experience. I was working on my device to get LineageOS 18, as I'm a total newbie with roms I followed the different articles that were posted on Getdroidtips for this particular case: Unlocked bootloader, flashed TRWP and installled lineageos. But then I realized it would be good to have Google Play for restoring my files and apps, but when tried to reboot into recovery mode to get Gapps flashed, Black Screen Of Death started.
After that
with the phone plugged to the pc it wasn't recognized as a device (so adb or fasboot where useless)
the only thing the phone reacted to was to press and hold power + volume up (either for reset or power off)
but no matter what, next boot again BSoD
Tried the Xperia Companion but it prompted that repair was not possible as bootloader was unlocked.
Eventually found this life saver
j4nn said:
If you have the phone off, hold volume up button while connecting to usb, it should enter fastboot (blue light), which also may be used for some recovery, if the phone has been unlocked (or for the unlock itself).
Click to expand...
Click to collapse
From there, using fasboot I could reboot the device back with the LineageOS. I was still having issues with recovery boot but I'll post that on a different thread.
Thanks again to everyone for sharing thoughts and tips!