I've got this smart box but I'm unable to get past EON activation screen upon boot.
Does anyone know how it can be done?
I can boot TWRP for S905X4.
The box is recognized by Amlogic burning tool 3.2.0 when connected to the PC with the reset button pressed.
I wonder if there are any custom ROMs for it or even better if this boot screen can be bypassed?
Using console shell, the EON activation screen can be disabled in real time after the system boots and the remote is paired.
Related
Hi guys,
I have an Aoson M30 (rockchip 3066) and it now won't boot to the home screen.
It Just turns on to the company logo boot up screen (which is normal) but stays at this screen. It flashes the pattern over and over so the processor is obviously still running .
It should then go to the home screen but just continues to flash the boot screen.
I tried to reload the firmware but the Rockchips batch tool doesn't work either. It sees the tablet but stays at "pink" on the indicator screen. It doesn't turn green (which it needs to) so the firmware will not transfer to the tablet.
I have reset via the reset button, flattened and recharged etc but it wont start up
.
I tried booting holding the volume + and power buttons and it comes up with an image of 2 penguins? Then it shows a vertical android bot for a second before showing one lying down with a " !" symbol above it.
I guess the firmware is corrupted but without the ability to reload I fear I may have a brick!!!!
Any ideas?
Cheers
Charlie in New Zealand
charlieenz said:
Hi guys,
I have an Aoson M30 (rockchip 3066) and it now won't boot to the home screen.
It Just turns on to the company logo boot up screen (which is normal) but stays at this screen. It flashes the pattern over and over so the processor is obviously still running .
It should then go to the home screen but just continues to flash the boot screen.
I tried to reload the firmware but the Rockchips batch tool doesn't work either. It sees the tablet but stays at "pink" on the indicator screen. It doesn't turn green (which it needs to) so the firmware will not transfer to the tablet.
I have reset via the reset button, flattened and recharged etc but it wont start up
.
I tried booting holding the volume + and power buttons and it comes up with an image of 2 penguins? Then it shows a vertical android bot for a second before showing one lying down with a " !" symbol above it.
I guess the firmware is corrupted but without the ability to reload I fear I may have a brick!!!!
Any ideas?
Cheers
Charlie in New Zealand
Click to expand...
Click to collapse
Hi,
i had the same problem some time ago and the way I solved it was by flashing again the original rom.
Your issue might be the driver installatin on the PC to recognize the tablet as a M30. I had to use an XP to be sble to install properly the RK3066 drivers.
Also try tomuse another usb cable. The one it comes with the tablet is quite patchy and I had to use a good quañity one.
Dont give up, if you ger the endless logo loop I dont think it is bricked.
Good luck.
I have a smartphone WIKO GOA on Android 4.4. I use apps or go to Internet. My smartphone is blocked on a black screen with WIKO GOA logo's.
The buttons and the touchs doesn't works. The smartphone is not detected on computer. I tried Factory Reset, Reboot System. The screen still displays No Command message on a black screen. My smartphone doesn't reacts.
Is is a problem with Android software? Is there anyway to repair?
So I have this one month old TCL P60 series Android TV, the model is U55P6046 to be exact.
After playing around with deactivating system apps (not rooted) the TV does not seem to finish boot.
After the TCL logo, I see the google android logo, but the boot never finishes. I tried google to see if I can find a way to perform a hard reset / factory reset somehow by entering recovery mode. But I can' t seem to find a way. There is no reset button or hole (which apperently the ROKU TV US model seem to have).
The TV has only three buttons on the bottom (left arrow, power and right arrow) but those don't seem to do the trick either. I tried all the sequences and everything I found for other Android TVs like Sonys, but I could not enter recovery mode.
Also the website (tcl.eu) is not much of a help either, does not mention anything related to a problem like that.
If someone has experience with a problem like that, feel free to help
Thanks!
*bump*
Download the new firmware from tcl website and put in a usb pen. Under the tcl logo on your tv there’s 3 hidden button. If I remember correctly you can enter in a sort of recovery mode while holding down the center key at boot.
Now it won't boot.
Trying to get rid of carrier trash and microsoft bloat.
Yes I should have unencrypted it first. yes I know the password.
It won't boot to the keyboard so I can't input the password to fix it.
(I know both the google android account pass and the samsung one.)
stuck at download mode / use emergency recovery on smart switch. I haven't got a windows pc I'm pushing with heimdall on linux.
Won't even power down. just blue screens. Any ideas thanks?
edit now I've pressed close pc screen (hoping to turn off the screen) and its bootlooping with vibrate. -- ok back to download model.
Hi everyone, I just received my Teclast M30 (10-inch tablet), version M5P3. I tried flashing a custom ROM but - surprise - I'm stuck on a bootloop.
The stock ROM was an Android 8 version. It is not rooted.
- I went into the developer options and allowed Bootloader unlocking via the corresponding option.
- Then via fastboot, I unlocked the Bootloader via (without any error):
Code:
fastboot flashing unlock
- Flashed TWRP, found on the only Teclast M30 thread... (=> https://forum.xda-developers.com/showpost.php?p=81064235&postcount=56) via fastboot (without any error):
Code:
fastboot flash recovery twrp-3.3.1-teclast-m30-20191201.img
- Flashed a GSI (ARM64 A-only) ROM (without any error). I used the "Android 9 - Havoc-OS v2.9" ROM on this link => https://github.com/phhusson/treble_experimentations/wiki/Teclast-m30-(MT6797x-helio-x27))
Code:
fastboot flash system Havoc-OS-v2.9-20190914-phhgsi_arm64_a-Official.img
I realized after a few hours that the TWRP I used was for the M4P7 version and mine is M5P3.. so I now know what I did wrong but even with this info, it doesn't help for my problem.
When trying to boot after flashing, I'm stuck on a bootloop.
It shows the Teclast Logo with some text saying it's in Orange State (= show a message saying the is bootloader unlocked) and then go to a screen with an Android Logo and a message saying: "No Command".
This "No command" screen is well known in our forum BUT problem is this screen stays only for about 3 seconds, and then the screen become black for 1 sec, then the "No Command" screen appears again for 3 sec, then it disappears again, endlessly. Here is a video of what's going on https://www.youtube.com/watch?v=O1iiu6MtOyM
Pressing "Power & Vol+" or "Power Button & Vol-" on this screen does nothing, I just can't enter fastboot mode as it keep looping and do not stay on the "No Command" screen.
When the tablet is completely shut down, I tried powering it up pressing just the "Power" button, but also "Power & Vol+", "Power Button & Vol-" but it does the same thing every time. It also acts identical whether the tablet is plugged in to the computer or just charging on the wall plug.
There is a "Reset" button on the tablet (must use a SIM pin to press it) but it seems useless to reset the device. When pressing it, it only shut down the tablet and stops the loop. I tried pressing it for long periods like 10-20-30 seconds in different situations but it just shut down the device and do nothing.
Does anyone have any leads on what I can do to revert back to original state or even just access fastboot mode ?
Thanks
I have the factory firmware file for my tablet (the good version this time..) now, but still the same problem of looping...
For future reference:
I fixed it thanks to the stock firmware and a tool (SP Flash Tool) that are both included in a file package provided by the constructor (at the time I created this post, this file didn't exist on their website. Now it does ).
This file is hosted on Baidu (only accessible with an account, and you need a Chinese phone number to create one) so I uploaded it on Mega if anyone need it:
https://mega.nz/file/3wAQDIrA#44HoXZxLt19mPo1XbzRbMPSCuZ9kZKIRWTWPvUJJhdY
Bye!