If you don't want the warnings when the Samsung M31 bootloader is unlocked, flash the following file with odin and the warnings will go away.
M31 Android 12 U3 tested
You can optionally use the following vbmeta disable
M31 U3 only working vbmeta
vbmeta disable android 12 updated
.
Related
Hi is there any way to flash twrp on Samsung galaxy a10 [SM-A105F] with bootloader version U3 (as my device became U3 after some security patch updates). I tried @afaneh's rooting and twrp thread (special thanks to him) and my device is successfully rooted. But when I try to flash twrp my device undergoes bootloop, this is happening because I tried to flash twrp which was meant for bootloader version U1 & U2 (as my device is U3). He gave the link of twrp which supports bootloader version U1 &U2. I just want to know that if I can downgrade my device or is there any way to flash twrp to bootloader version U3.
Love y'all!!
patch boot.img in u2 and flash from odin
Can you make it clear?
pardusx said:
patch boot.img in u2 and flash from odin
Click to expand...
Click to collapse
Which boot.img
Twrp or AP magisk pacthed?
Hello,
There is any way for unlocking bootloader and rooting the device Samsung Galaxy A01 SM-A015M ?
I am on A015MUBU4AUA5.
I can allow oem unlock on develop settings. I can try to unlock in unlock mode.
But, unlocking is not working and odin can't flash patched vbmeta.
:-(
Thank you very much
ROOT WITH MAGISK 23 WORKING 100% ON ANDROID 11 JUST UPGRADE UNLOCK BOOTLOADER AND FOLLOW THE INSTALLATION GUIDE https://topjohnwu.github.io/Magisk/install.html
Hello,
Finally, I can unlock the bootloader, flash twrp and root my Samsung Galaxy A01 (a01q) (SM-A015M).
All I need is just update to Android 11 and then I can unlock the bootloader and flash the magisk patched boot.img together the patched vbmeta.img.
I can flash TWRP using the image file "TWRP_3.5.2_A015F.img" sent by @tariqa
How To Root Samsung A01 (a015f/DS)
Hello, I want to ask how to root samsung galaxy a01 (a015f) , i want to instal f.lux for better blue light filter, Thanks!
forum.xda-developers.com
Thank you very much
1. Unlock your bootloader enter in download mode Vol+ + Vol- + USB conected to pc (Keep in mind that by doing this you will lose your files, it is advisable to make a backup of your photos, music, etc.)
2. Once you start your cell phone install magisk manager, Choosing the boot.img file of your rom into the app (Tip: Only!!! If your model is SM-A015M Android 11 I leave you my own modified boot.img to flash:
File on MEGA
mega.nz
Otherwise, you can download the firmware (3.79 gb) and extract the boot.img from the firmware of your model SM-A015 M / F ... Android 10, Android 11... etc. And No need for pc
https://samfrew.com/model/SM-A015M/
3. The image will begin to flash
4. When it restarts you will have Root on the cell phone!
------------------------------------------------------------------------------------------------------------------------------------------------
Extra: If you need the custom recovery I give you the link with my TWRP which is installed through the Odin program on a PC (this step does not delete your files)
File on MEGA
mega.nz
Keep in mind that to install TWRP you must deactivate the DM-VERITY & FORCEENCRYPT DISABLER I leave it in a link:
Zackptg5 - Android
zackptg5.com
This is a module that can be installed via magisk, which is necessary to decrypt the system ... so once TWRP is installed, it is advisable to uninstall it via Magisk to avoid R / W errors
How root and unlock bootloader samsung galaxy A015M-A015M
Gichee said:
How root and unlock bootloader samsung galaxy A015M-A015M
Click to expand...
Click to collapse
Just read previous replies.
Must Have An Unlocked Bootloader To Do This!
This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magisk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
I Do Not Recommend Mixing Bit 1 And Bit 2 Firmware!!!!
Downloads
SM-N981U/U1/W- Model
USERDATA_AIO_N981_FORCE_WIPE_10_10_21.tar.md5 --Use on android 10 or 11
This will force a wipe of data no mater what.
Odin3_v3.14.1_3B_PatcheD.zip
Note 20 Ultra SM-N986U/U1
TWRP Recovery Provide by @afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions For Newly Unlocked Devices
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631
3. Use patched 3.14 odin and load file USERDATA_SLOT_N98*U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Install Instructions For Updating Firmware On Phone Already Unlocked
1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above
2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_N98*U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not
Install Instructions If Updating Images With TWRP
1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.
2. Use patched 3.14 odin and load file USERDATA_AIO_N98*_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.
4. Alternatively to using USERDATA_AIO_N98*_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_22_S20_Series.zip found in post 2
Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
@elliwigy
@klabit87
@Krog18
@me2151
@stang5litre
@Raymonf for modified odin
@rayan-refoua for boot animation
@TheMadScientist
@afaneh92
@kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
@JDBarlow for test S20 stuff
Info For U Model Bootloader Unlocking Can Be Found
[Android][UNSAMLOCK] Bootloader Unlock for Samsung US/Canada Devices
This thread is @svetius approved Important notice: Do not update to April 2023 security update (XXXXXXXXXXWCX) or later. Examples: G998USQS6EWCA, N986USQU4HWD1. Samsung has patched the bootloader unlock again on those updates. NOTE: The OneUI...
forum.xda-developers.com
Below US snapdragon devices can be bootloader unlocked with above service as long as bootloader version meets below criteria. Bootloader version can be determined from the 5th character from the right on the baseband version or build number, in some cases from kernel version
Z Fold2 5G BL V1
Fold 5G BL V1-4
Fold BL V1-4
Z Flip 5G BL V1
Z Flip BL V1-3
Note series 20 BL V1
S20 series BL V1
S20 FE 5G BL V1-2
Note 10 series BL V1-5
S10 Lite BL V1-3
Note 10+ 5G N976U BL V1-4
Note 10+ 5G N976V BL V1-5
S10 5G BL V1-5
S10 series BL V1-4
Note 9 BL V1-7
S9 series BL V1-9
Tab S6 BL V1-3
Tab S7 BL V1
Tab S7+ BL V1
A71 5G BL V1-2
A51 BL V1-5
A51 5G BL V1-4
A50 A505W BL V1-A
A50 A505U BL V1-B
S21 BL V1
A32 5G BL V1-3
Tab Active Pro 10.1 BL V1-4
XCover Pro BL V1-7
can I root a nord 10 5g that has android 11 using the 10.5 stock firmware? I can't seem to downgrade to 10 or find an android 11 image
Why Don't you just fastboot TWRP and flash Magisk
BTK19 said:
Why Don't you just fastboot TWRP and flash Magisk
Click to expand...
Click to collapse
How
Thread '[TWRP][3.5.2_10][Billie]TWRP for Oneplus Nord N10 5G [BETA]' https://forum.xda-developers.com/t/twrp-3-5-2_10-billie-twrp-for-oneplus-nord-n10-5g-beta.4256333/
You can't fastboot it you have to flash it
The formula, as I understand it, has three steps. Acquiring the token from oneplus, enabling oem unlock in development settings, flashing the token via fastboot. Fastboot provides a code to start the process, and fastboot will flash the code that enabled any modifications afterwards.
I was trying to do the OTA update by restoring image in Magisk. The OTA still failed. I still went ahead and selected Install to inactive slot in Magisk. Now the phone can't boot up again. It's stuck on the screen
Fastboot Mode
Product revision: oriole MP1.0
Bootloader version: slider 1.0-7753224
Baseband version: unknown
Serial number
Secure boot: PRODUCTION
NOS production: yes
DRAM 89GB
UFS 128GB Kioxia
Device State: unlocked
Boot slot: b
Enter reason: boot failure
UART: disabled
Click to expand...
Click to collapse
It gives me the options to
Start
Restart Bootloader
Recovery Mode
Rescue Mode
BarCode
Power off
The command 'fastboot devices' works.
You might want to look at this thread and/or post your question there. No need for another orphan thread.
[GUIDE] Pixel 6 "oriole": Unlock Bootloader, Update, Root, Pass SafetyNet
⚠️⚠️⚠️WARNING! IF YOU ARE UPDATING TO ANDROID 13 FOR THE FIRST TIME, READ THIS FIRST! ⚠️⚠️⚠️ If you are looking for my guide on a different Pixel, find it here: Pixel 3 Pixel 3XL Pixel 3a Pixel 3aXL Pixel 4 Pixel 4XL Pixel 4a Pixel 4a (5G)...
forum.xda-developers.com
Are you able to get to the bootloader? If so, flash a factory image to both slots.
./fastboot flash --set-active=(a or b) then reboot the bootloader. Flash the image. Then do the same command for the other slot and flash the image again. Seems to work for me when I can't boot.
Thread closed on request of OP @mustardseeds