Related
Hello,
I have htc desire 601 and android operating system crash and i am unable to boot in the system and enable usb debugging. My phone stops in htc logo. I tried to boot in recovery mode but it dont work and when i tried to root another rom i cant because USB Debugging is off... Has anyone solution for that kind off problem, please?????
sinkowc91 said:
Hello,
I have htc desire 601 and android operating system crash and i am unable to boot in the system and enable usb debugging. My phone stops in htc logo. I tried to boot in recovery mode but it dont work and when i tried to root another rom i cant because USB Debugging is off... Has anyone solution for that kind off problem, please?????
Click to expand...
Click to collapse
U can boot into Hboot right??
If so then go to fastboot mode from there & flash Recovery
If that's not the option for u then i think ruu(rom upgrade utility by htc dev )is solution for u...
yes i can do that to go in hboot mode and i downloaded that ruu file and cannot do that because pc doesnt find my phone and i have installed drivers. Everywhere it says that USB debugging must be enable to do that. I have also downloaded sdk manager and platform tools to try install ruu with cmd via usb cabel but device was not found also. I tried many ways that is on youtube and xda forums but there isnt any good solution yet for me. For good solution that work il gave some donation.
Flash Recovey via fastboot If Device Stuck or Crashed
sinkowc91 said:
yes i can do that to go in hboot mode and i downloaded that ruu file and cannot do that because pc doesnt find my phone and i have installed drivers. Everywhere it says that USB debugging must be enable to do that. I have also downloaded sdk manager and platform tools to try install ruu with cmd via usb cabel but device was not found also. I tried many ways that is on youtube and xda forums but there isnt any good solution yet for me. For good solution that work il gave some donation.
Click to expand...
Click to collapse
Requirements---
1)twrp recovery https://dl.twrp.me/zara/
a)if ur's is zara ul then go for https://dl.twrp.me/zara/twrp-2.8.7.0-zara.img.html
b)if it's zara cl then go for https://dl.twrp.me/zara/twrp-2.8.7.0-zaracl.img.html
2)fastboot cmd 'fastboot flash recovery recoveryname.img' ------------> Where Recovery Name is the file name of ur recovery
3)Any Custom Rom Or Stock Zip
Procedure
1)boot into hboot
2)click on fastboot and connect usb cable
3)open cmd and check fastboot devices
4)it show some id with fastboot name [if it is then u r good]
5)now copy the recovery in ur current cmd folder or else change the folder of cmd into ur recovery path
6)now type fastboot flash recovery twrp-2.8.7.0-zara.img
7)now click on boot loader and scroll down to recovery then click on it
8)now ur in recovery mode now flash any custom rom's [i suggest resurection remix]
9)Before Flasing do factory reset in wipe section and go for install zip in install section
10)now ur good to boot
Note
1)to copy zip to sdcard/ext-card our twrp recovery supports mtp enable while on recovery mode[open my computer there u can see mtp device]
2)if u want to process ruu only then click on adb sideload in advanced sections i think adb will detect the device as in recovery mode
3)then open ruu [i might think it will work]
3)i did nt test the above process
4)if u want the stock os only then download required stock zip and flash it...there r many stocks like europe,,asia .................................
5) Hope u Installed Sdk Manger If not so go for MINIMAL ADB AND FASTBOOT.EXE
At the Same Time U Better Take a look on this Thread Also http://forum.xda-developers.com/desire-601/general/collection-kitkat-ruu-t3228817
Hope it might Helps
Thanks to XDA Developers Thanks To TWRP Recovery Thanks to Custom Roms
And Finally Thanks To My frnd Hareesh
unfortunately, I tried to install magisk patched boot image by using following command when my device was in fastboot mode "fastboot flash boot magisk patched boot.img" using cmd, after that I entered "fastboot reboot" but my device hadn't rebooted, then I tried to switch it on manually but it just vibrated and showed nothing on screen, on trying to start it on fastboot or recovery mode, it does the same and shows nothing. On connecting it to pc it doesn't gets recognized by pc. On connecting to charger, it shows a white led in notification led panel. can you guys please help me! please answer me fast the solution! plzz plzz :cryinglzz!
ShubhAshutosh said:
unfortunately, I tried to install magisk patched boot image by using following command when my device was in fastboot mode "fastboot flash boot magisk patched boot.img" using cmd, after that I entered "fastboot reboot" but my device hadn't rebooted, then I tried to switch it on manually but it just vibrated and showed nothing on screen, on trying to start it on fastboot or recovery mode, it does the same and shows nothing. On connecting it to pc it doesn't gets recognized by pc. On connecting to charger, it shows a white led in notification led panel. can you guys please help me! please answer me fast the solution! plzz plzz :cryinglzz!
Click to expand...
Click to collapse
Your device is bricked but don't worry, I have a solution but you'll have to open your device.
1.Take the back cover off by first removing the SIM Card Tray. Watch youtube video for this
2.Download SP Flash tool and latest version official rom (fastboot one) from xiaomi firmware updater site(search on google)
3.Take battery connection off (learn from youtube how)
4.Now install USB VCOM drivers on your pc somehow.
5.Download MTK Bypass tool ( ignore virus warning of pc)
6. Open MTKI bypass tool and click bypass. Now hold volume up and connect usb(without leaving the button)
7.When it shows successfull in the logs close mtk bypass tool
8.open sp flash tool and click scatter file and select the file with name android scatter. Leave everything else default
9. Click download in the dropdown and you'll see something is in progress bar. IF stuck, try agian by starting from mtk bypass tool.
10. connect battery when successful. put battery connection and get to normal everything. Charge device and enjoy!!!
mottaM said:
Your device is bricked but don't worry, I have a solution but you'll have to open your device.
1.Take the back cover off by first removing the SIM Card Tray. Watch youtube video for this
2.Download SP Flash tool and latest version official rom (fastboot one) from xiaomi firmware updater site(search on google)
3.Take battery connection off (learn from youtube how)
4.Now install USB VCOM drivers on your pc somehow.
5.Download MTK Bypass tool ( ignore virus warning of pc)
6. Open MTKI bypass tool and click bypass. Now hold volume up and connect usb(without leaving the button)
7.When it shows successfull in the logs close mtk bypass tool
8.open sp flash tool and click scatter file and select the file with name android scatter. Leave everything else default
9. Click download in the dropdown and you'll see something is in progress bar. IF stuck, try agian by starting from mtk bypass tool.
10. connect battery when successful. put battery connection and get to normal everything. Charge device and enjoy!!!
Click to expand...
Click to collapse
Thank you very much @mottaM
Your solution saved my redmi 6a. I had some problems/errors while using spflash tool but after reinstalling drivers and changing the usb cable my problem sorted out.
Also, the new spflash tool is quite confusing for me so i used v5.2152
SP Flash Tool v5.2152 for Windows - MediaTek Flash Tool
Download SP Flash Tool v5.2152 to flash or install Stock Firmware ROM (Flash File) on the devices powered by Mediatek Chipset.
spflashtools.com
mottaM said:
Your device is bricked but don't worry, I have a solution but you'll have to open your device.
1.Take the back cover off by first removing the SIM Card Tray. Watch youtube video for this
2.Download SP Flash tool and latest version official rom (fastboot one) from xiaomi firmware updater site(search on google)
3.Take battery connection off (learn from youtube how)
4.Now install USB VCOM drivers on your pc somehow.
5.Download MTK Bypass tool ( ignore virus warning of pc)
6. Open MTKI bypass tool and click bypass. Now hold volume up and connect usb(without leaving the button)
7.When it shows successfull in the logs close mtk bypass tool
8.open sp flash tool and click scatter file and select the file with name android scatter. Leave everything else default
9. Click download in the dropdown and you'll see something is in progress bar. IF stuck, try agian by starting from mtk bypass tool.
10. connect battery when successful. put battery connection and get to normal everything. Charge device and enjoy!!!
Click to expand...
Click to collapse
Thanks you very much!!
Hello!
I need to downgrade Android 10 to Android 9 on my Oppo F11 Pro. I've flashed many roms till now on other devices. This one is a bit *cough*
I have the .ozip file of the Android 9 rom, need to flash.
Default recovery mode of ColorOS doesnt work ofc, doesnt support downgrading.
After converting .ozip to .zip and extracting the files, SP Flash Tool or such tools arent able to get the files somehow They dont load it up, even not the scatter files.
So I think I should first unlock the bootloader, which I've been trying to today.
Doing the "adb devices" doesnt list my device, guess I need the drivers.
Downloaded drivers but they are in .inf format, which Ive been unable to install (with my "search the internet and do it" ways.
"The inf file you selected does not support this method of installation". And thru administrator cmd, its Installation failed.
Im so confused with those drivers Idk which ones to install.
One driver I've pasted on hastebin as.. hastebin[dot]com/abopesexej.shell
Couls someone pls help me out? Im hitting the wall atm
Neon111 said:
Doing the "adb devices" doesnt list my device, guess I need the drivers.
Downloaded drivers but they are in .inf format, which Ive been unable to install (with my "search the internet and do it" ways.
"The inf file you selected does not support this method of installation". And thru administrator cmd, its Installation failed.
Im so confused with those drivers Idk which ones to install.
One driver I've pasted on hastebin as.. hastebin[dot]com/abopesexej.shell
Couls someone pls help me out? Im hitting the wall atm
Click to expand...
Click to collapse
Don't mix up USB-driver and ADB-driver and/or Fastboot-driver: totally different drivers.
A USB-driver is a file that allows an USB hardware device to communicate with the operating system of a computer. This driver is implemented in all operating systems by default.
ADB-driver and/or Fastboot-driver is a “bridge” for Android developers / hackers to work out bugs in their Android applications and/or modify existing Android OS. This is done by connecting an Android device that runs the software through a PC, and feeding appropriate commands in its terminal.
Don't use any ADB-driver and/or Fastboot-driver as they are hundreds of times published on the WEB - and even here on XDA. Only make use of those drivers officially offered by your device's OEM/Carrier.
Comment withdrawn by author.
(When "adb devices" shows the device serial)
When i try to do "adb reboot bootloader",
The phone reboots and says
"The serial is not matched
fastboot_unlock_verify fail"
What should I do? :u
And not being able to use fastboot.. I cant find related drivers on the internet for that purpose.. I downloaded and installed what I could (fastboot commands not working.. shows <waiting for device> )
Neon111 said:
(When "adb devices" shows the device serial)
When i try to do "adb reboot bootloader",
The phone reboots and says
"The serial is not matched
fastboot_unlock_verify fail"
What should I do? :u
Click to expand...
Click to collapse
Generally speaking, the serial number as reported by ADB will be different to Fastboot as determined by:
Manufacturer
Make and model of device in question
Android version
Fastboot, on the other hand, since there's no ADB loaded, instead, uses a rudimentary USB protocol tied in with Android's boot-loader, the serial number will be different.
EDIT:
Neon111 said:
And not being able to use fastboot.. I cant find related drivers on the internet for that purpose.. I downloaded and installed what I could (fastboot commands not working.. shows <waiting for device> )
Click to expand...
Click to collapse
Your Oppo F11 Pro is based on Mediatek chipset. IMO you instead of Fastboot driver have to make use of Oppo F11 Pro Mediatek driver - a specialized version of general Fastboot driver - what is compatible with SP Flash Tool, MTK Flash Tool, SP MDT Tool and SN Write Tool.
DL: https://gsmusbdriver.com/oppo-f11-pro
jwoegerbauer said:
Your Oppo F11 Pro is based on Mediatek chipset. IMO you instead of Fastboot driver have to make use of Oppo F11 Pro Mediatek driver - a specialized version of general Fastboot driver - what is compatible with SP Flash Tool, MTK Flash Tool, SP MDT Tool and SN Write Tool.
DL: https://gsmusbdriver.com/oppo-f11-pro
Click to expand...
Click to collapse
But I do not have flash files related to the listed programs..
Everywhere I could find only an .ozip file, which I turned into a .zip from a program I found on here. The zip when extracted gave me all the .img files and scatter.txt, but the scatter.txt doesnt load up in SP Flash Tool and the like.
Neon111 said:
But I do not have flash files related to the listed programs..
Everywhere I could find only an .ozip file, which I turned into a .zip from a program I found on here. The zip when extracted gave me all the .img files and scatter.txt, but the scatter.txt doesnt load up in SP Flash Tool and the like.
Click to expand...
Click to collapse
Were you able to unlock your bootloader? I found various tutorials of extracting boot image from the ozip files. But Veterans are saying oppo doesn't let people unlock bootloader.
Hi Poco x3 gt brick please help me!
Copied from another post, works for me
Hello! (Read it fully)
I had the same problem, but i finally got it. First download the 12.5.7.0 rom from this page (Fastboot rom)
Xiaomi Poco X3 GT (chopin) Stock Firmware Collections
On this page, we will share all the latest Xiaomi Poco X3 GT (codenamed chopin) firmware flash files. To flash the firmware file, you need Xiaomi Mi Flash
www.getdroidtips.com
Then, go to Mi Flash Tool (also download from that page). The version you need is 20210226
Then unzip the rom as many times as it needs, and copy it (the most decompressed folder) to the desktop. Then, launch Mi Flash tool and install the drivers in drivers page. In the right corner you need to select "Clean all". And.... FLASH!
It solved my problem. I had the same as you. If your computer doesn't recognize your device, stay in fastboot 30 minutes and it will turn off automatically (with usb unplugged) or if it says no digest file found, turning off in 5 seconds turn it off.
I hope this can solve your problem.
Edit: Then update the firmware to 12.5.8.0 OTA way. Don't obey people saying stupidities like "Buy a new one". This is a forum, to help people, and if u don't know the solution, DON'T SAY ANYTHING
Bye
download mtk bypass tool and spflashtoll , install mtk preloader driver , open mtk bypass tool and spflash tool , open scatter file from folder image( from unziped fastboot firmware folder), then click disable auth from bypass tool and put the device and hold vol up + vol down , when seccus click download from spflashtool good luck
Welp. here's my take on how i did it.
Download All Links here:
SP Flash Tool: https://mega.nz/file/G4VnxTKa#_uq8YdL3VS-ilO_cVIDv2zb4RRiVwCgnLlK_xS4uJo8
MTK META Utility: https://mega.nz/file/u4cwzRgL#n15IAtntMiPz_W2wB1Yb6j8yXvb86V2dzLesT6nOnnY
POCO X3 GT Original Firmware + Tutorial: https://romprovider.com/poco-x3-gt-firmware-support/
(MEGA Links are mine for easy download and no corruption)
Download the firmware first before the tools
After downloading all the files above, do this
1. Extract the firmware into your desktop
2. Extract SP Flash Tool into your desktop
3. Run SP Flash Tool and MTK META UTILITY
4. On SP Flash Tool, Locate for Scatter Loading file
View attachment 5632675
Press Choose
5. Locate the scatter file in your extracted firmware
View attachment 5632677
SP Flash Tool will Look like this
View attachment 5632681
6. Run MTK META UtilityView attachment 5632683
7. Press "Disable Auth
View attachment 5632685
8. Long press VOL Up And connect to pc (Check Device Manager Until you see Mediatek USB Port (COMx). If you didn't see it, Download the Mediatek Drivers: https://androidfilehost.com/?w=files&flid=216849 )
If it detected, It will say this on logs:
View attachment 5632687
9. Press Download (NOTE: Just select DOWNLOAD ONLY. DO NOT SELECT "FORMAT-DOWNLOAD" or your IMEI and MAC ADDRESS WILL BE GONE FOREVER!!!)
View attachment 5632689
have some coffee while flashing
If it succeeded, the OK Window will POPUP
View attachment 5632691
Long press power button to reboot until the poco logo shows up. It will reboot to FASTBOOT (aka. Bootloader)
While you're at it and if you have platform_tools,
10. Copy contents in platform tools and transfer to the firmware folder (or copy the insides of the firmware folder and paste it in platform_tools folder)
it will look like this
View attachment 5632693
(don't mind the gms.apk cause i accidentally added there but there's no gms.apk on yours)
11. Run flash_all.bat and wait until the phone reboots.
if it rebooted, it should've reboot to miui.
that's how i restored my phone.
pls reply if it works to you too...
Hello, I need help after pressing download in sp flash after a few seconds of the following error message:
Luizinho22 said:
Hello, I need help after pressing download in sp flash after a few seconds of the following error message:
Click to expand...
Click to collapse
try flashing one by one
https://www.google.com/url?sa=t&source=web&rct=j&url=https://m.youtube.com/watch%3Fv%3DdbItjjjXwdk&ved=2ahUKEwizn5PGo6T4AhVFRmwGHQtIB_sQwqsBegQIBRAD&usg=AOvVaw1crzkjvWepJYX8dBLp6njt
No, error continued
Luizinho22 said:
Hello, I need help after pressing download in sp flash after a few seconds of the following error message:
Click to expand...
Click to collapse
oh. i'll research
Ok
Luizinho22 said:
No, error continued.
Click to expand...
Click to collapse
is your device global? or your device is just bootloader locked???
Global
the bootloader is blocked
Luizinho22 said:
the bootloader is blocked
Click to expand...
Click to collapse
if your bootloader is locked, you can't do anything... unless if you find a fix
Luizinho22 said:
Hello, I need help after pressing download in sp flash after a few seconds of the following error message:
Click to expand...
Click to collapse
worked for me same model , flash one by one , after flashing one then unchek it and go for the next one ,skip the ones with errors , keep going to the last one , when finish close and disconect ,now you should be able to enter fastboot mode, and now go to mi flash tool, and flash the official global rom ,it should be succed and boot your phone
Hi guys sadly I completely softbricked my motorola X40 phone i'm a idiot.
I flashed to a wrong firmware file (edge 30 pro) and re-locked bootloader then found it phone doesn't properly boot anymore.
I can boot it in fastboot mode but flashing in normal fastboot mode doesn't work with locked bootloader and lenovo rescue tool can't help me either.
Edit: Weirdly I managed to boot it up and it shows as a "motorola edge 30 pro" and I can control my screen with a USB mouse.
But when I try to enable "OEM unlocking" in developer options the settings app just crashes.
But my problem stays the same, i'm still stuck with a locked bootloader
Is there any chance to trick this phone into EDL mode or any working blankflash?
Any suggestions? i'd appreciate it
jody2k said:
Hi guys sadly I completely softbricked my motorola X40 phone i'm a idiot.
I flashed to a wrong firmware file (edge 30 pro) and re-locked bootloader then found it phone doesn't properly boot anymore.
I can boot it in fastboot mode but flashing in normal fastboot mode doesn't work with locked bootloader and lenovo rescue tool can't help me either.
Edit: Weirdly I managed to boot it up and it shows as a "motorola edge 30 pro" and I can control my screen with a USB mouse.
But when I try to enable "OEM unlocking" in developer options the settings app just crashes.
But my problem stays the same, i'm still stuck with a locked bootloader
Is there any chance to trick this phone into EDL mode or any working blankflash?
Any suggestions? i'd appreciate it
Click to expand...
Click to collapse
It doesn't matter if the oem lock is on to flash the stock firmware.
You can directly flash the right firmware via fastboot. Lenovo rescue tool may not flash...
cascade128 said:
It doesn't matter if the oem lock is on to flash the stock firmware.
You can directly flash the right firmware via fastboot. Lenovo rescue tool may not flash...
Click to expand...
Click to collapse
Hi thanks for the response, how to flash directly stock firmware? which method should I use? This is what I get when I try to flash anything through adb (phone in fastboot mode) I added a screenshot from adb in windows and took a picture from my phone to show in which fastboot mode it shows.
Tried several things flashing directly from adb but it always says permission denied because of the bootloader lock, maybe i'm doing something wrong.
It's not adb, it's fastboot mode.
Where you are is right.
It will be in the mode in the screenshot of the device, that's right.
Use the one in the file i gave you.
Here are the guidelines.
01. Download the latest Firmware from lolinet
02. We extract the firmware.zip, open servicefile.xml and copy the contents into this website
03. Download the mfastboot.rar ADB i gave and put it in the rom folder you extracted.
04. We put the flashfile.bat we created (Step 02. Extract, open servicefile.xml and copy the content to this site) into the rom folder you extracted.
05. Reboot your phone into fastboot (adb reboot fastboot or press and hold Power + Volume Down)
06. Everything is ready, click on the ''flashfile.bat'' file.
07. Don't disconnect the phone until the update has finished.
cascade128 said:
It's not adb, it's fastboot mode.
Where you are is right.
It will be in the mode in the screenshot of the device, that's right.
Use the one in the file i gave you.
Here are the guidelines.
01. Download the latest Firmware from lolinet
02. We extract the firmware.zip, open servicefile.xml and copy the contents into this website
03. Download the mfastboot.rar ADB i gave and put it in the rom folder you extracted.
04. We put the flashfile.bat we created (Step 02. Extract, open servicefile.xml and copy the content to this site) into the rom folder you extracted.
05. Reboot your phone into fastboot (adb reboot fastboot or press and hold Power + Volume Down)
06. Everything is ready, click on the ''flashfile.bat'' file.
07. Don't disconnect the phone until the update has finished.
Click to expand...
Click to collapse
Hi thanks for helping me, I downloaded the right firmware, uploaded the servicefile.xml to the site you gave me and created the flashfile.bat. Pasted the flashfile.bat into the samen folder as the rom and also extracted the mfastboot.rar into the same rom folder.
Then clicked on the flashfile.bat but sadly I get the same error's (Permission Denied)
My phone is still in fastboot mode (right screenshot)
Any idea's?
jody2k said:
Hi thanks for helping me, I downloaded the right firmware, uploaded the servicefile.xml to the site you gave me and created the flashfile.bat. Pasted the flashfile.bat into the samen folder as the rom and also extracted the mfastboot.rar into the same rom folder.
Then clicked on the flashfile.bat but sadly I get the same error's (Permission Denied)
My phone is still in fastboot mode (right screenshot)
Any idea's?
Click to expand...
Click to collapse
Very interesting, it shouldn't give such an error. You are flashing Motorola signed images, you don't need the bootloader unlocked for this Sorry i can't be of more help, i hope you can recover your device...
cascade128 said:
Very interesting, it shouldn't give such an error. You are flashing Motorola signed images, you don't need the bootloader unlocked for this Sorry i can't be of more help, i hope you can recover your device...
Click to expand...
Click to collapse
Yea indeed well thanks anyway, my only hope left is a third party recovery tool that supports this phone in future.
I'll put the X40 in my closet until then and buy another new phone in the meanwhile don't have much of a choice lol.
Hello!
Did you try RSDLite tool to flash firmware?
thunderman75 said:
Hello!
Did you try RSDLite tool to flash firmware?
Click to expand...
Click to collapse
I tried but the issue is there that it doesn't detect the port / device on the RSDlite tool.
Meanwhile I can see in devicemanager in windows the phone is detected in ADB/fastboot mode but RSDlite tool needs some portmode to succeed, the tool says it doesn't detect my device. I can't seem to connect it with that port RSDlite tool needs, also tried general ADB drivers but didn't help either. I also saw in one topic to make it work with RSD tool you need to install the qualcomm drivers, but these drivers don't work with this phone in normal fastboot mode. In other words I can't seem to RSD tool recognise my phone on the needed port. I think this tool only works in EDL mode (+qualcomm driver) but my moto X40 doesn't yet support EDL mode I think.
https://androidmtk.com/use-rsd-lite-tool
=> I followwed this tutorial but @ Step nr.8 there isn't any port or device detected even when my phone is correctly in fastboot mode
I tried Generic ADB drivers and the official motorola USB drivers, both detected in devicemanager in windows but RSDtool lite didn't detect my phone.
jody2k said:
I tried but the issue is there that it doesn't detect the port / device on the RSDlite tool.
Meanwhile I can see in devicemanager in windows the phone is detected in ADB/fastboot mode but RSDlite tool needs some portmode to succeed, the tool says it doesn't detect my device. I can't seem to connect it with that port RSDlite tool needs, also tried general ADB drivers but didn't help either. I also saw in one topic to make it work with RSD tool you need to install the qualcomm drivers, but these drivers don't work fastboot mode. In other words I can't seem to RSD tool recognise my phone on the needed port. I think this tool only works in EDL mode (+qualcomm driver) but my moto X40 doesn't yet support EDL mode I think.
https://androidmtk.com/use-rsd-lite-tool
=> I followwed this tutorial but @ Step nr.8 there isn't any port or device detected even when my phone is correctly in fastboot mode
I tried Generic ADB drivers and the official motorola USB drivers, both detected in devicemanager in windows but RSDtool lite didn't detect my phone.
Click to expand...
Click to collapse
This looks promising:
Motorola Unbrick Tool: Unbrick any Moto Device via EDL Mode
In this comprehensive guide, we will show you the detailed steps to unbrick any Motorola device booted to EDL Mode using the Unbrick Tool.
droidwin.com
thunderman75 said:
This looks promising:
Motorola Unbrick Tool: Unbrick any Moto Device via EDL Mode
In this comprehensive guide, we will show you the detailed steps to unbrick any Motorola device booted to EDL Mode using the Unbrick Tool.
droidwin.com
Click to expand...
Click to collapse
Yeah let's hope my device model (X40) get's support soon
@mark332 Any idea's?
I have the same problem, because I did the same thing hahaha, I tried these methods and nothing was successful, I tried to use Lenovo's RSA, but it only installs the correct firmware and Fastboot, but when it comes to rescuing it just has a "Warning" message.
zequinhaBR said:
I have the same problem, because I did the same thing hahaha, I tried these methods and nothing was successful, I tried to use Lenovo's RSA, but it only installs the correct firmware and Fastboot, but when it comes to rescuing it just has a "Warning" message.View attachment 5872305
Click to expand...
Click to collapse
Guess we are in the same boat loll xp having indeed the exact same message. I think the RSA tool detects the right device but it checks for some sort of keys/verification and sees it isn't the right firmware so it stops flashing.
I have found out you can also enter recovery mode by selecting "recovery" in fastboot mode with the key buttons.
Then you need to press power button + down key for 3 seconds, then short the volume up key.
Youll get a other menu with also fastboot mode and adb sideload etc...
but again sadly neither fastboot or adb sideload did work for me
When I tried to flash the original firmware in sideload mode trough ADB it gives a"verification error"
In fastboot mode it says that it can't flash with locked device
I hope this info will be any useful for people stumble upon this topic in the future and maybe help to unbrick this phone.
jody2k said:
I tried but the issue is there that it doesn't detect the port / device on the RSDlite tool.
Meanwhile I can see in devicemanager in windows the phone is detected in ADB/fastboot mode but RSDlite tool needs some portmode to succeed, the tool says it doesn't detect my device. I can't seem to connect it with that port RSDlite tool needs, also tried general ADB drivers but didn't help either. I also saw in one topic to make it work with RSD tool you need to install the qualcomm drivers, but these drivers don't work with this phone in normal fastboot mode. In other words I can't seem to RSD tool recognise my phone on the needed port. I think this tool only works in EDL mode (+qualcomm driver) but my moto X40 doesn't yet support EDL mode I think.
https://androidmtk.com/use-rsd-lite-tool
=> I followwed this tutorial but @ Step nr.8 there isn't any port or device detected even when my phone is correctly in fastboot mode
I tried Generic ADB drivers and the official motorola USB drivers, both detected in devicemanager in windows but RSDtool lite didn't detect my phone.
Click to expand...
Click to collapse
New hope on horizont for your phone...Machine with Windows10(32-bit) and Moto USB drivers(32-bit).
Phone booted in fastboot mode and connected to PC,recognized instantly.
Screenshot of my Moto Edge 30 ultra connected to above mentioned PC.
Good luck!!!
thunderman75 said:
New hope on horizont for your phone...Machine with Windows10(32-bit) and Moto USB drivers(32-bit).
Phone booted in fastboot mode and connected to PC,recognized instantly.
Screenshot of my Moto Edge 30 ultra connected to above mentioned PC.
Good luck!!!
Click to expand...
Click to collapse
Hey man thanks for your response, sadly i'm on a 64bit windows 11 version. Would it be any different than the 64bit driver vs 32bit you think? Because have tried this several times can't get RSD lite detect my phone . In device manager it's detected first as "fastboot rtwo s" and when the moto 64bit driver is installed it's detected as "motorola ADB interface" so it's correctly detect by the system.
My phone is also in fastboot mode never the less RSD lite tool doesn't detect anything
Guess I could try to install windows 10 32bit i'll keep this updated
jody2k said:
Hey man thanks for your response, sadly i'm on a 64bit windows 11 version. Would it be any different than the 64bit driver from motorola you think? Because have tried this several times can't get RSD lite detect my phone . In device manager it's detected first as "fastboot rtwo s" and when the moto 64bit driver is installed it's detected as "motorola ADB interface" so it's correctly detect by the system.
Never the less RSD lite tool doesn't detect anything
On which mode is your edge 30 phone, fastboot or edl?
Click to expand...
Click to collapse
I also have 64 bit Win11 machine with RSD Lite installed and it can't detect phone.
But when I connect it to my old laptop(Win10-32 bit,RSD Lite) phone is detected instantly.
Try to find someone who has machine with 32 bit Windows and try to rescue your phone.
Tip from professionals: RSD Lite works best with older version of a 32 bit Windows...
thunderman75 said:
I also have 64 bit Win11 machine with RSD Lite installed and it can't detect phone.
But when I connect it to my old laptop(Win10-32 bit,RSD Lite) phone is detected instantly.
Try to find someone who has machine with 32 bit Windows and try to rescue your phone.
Tip from professionals: RSD Lite works best with older version of a 32 bit Windows...
Click to expand...
Click to collapse
Just tried on my older 32bit computer with windows 10 and installed the 32bit driver for motorola. Sadly the issue is the same, RSD lite doesn't detect the moto x40. Where did you download the driver?
Motorola USB Driver for Windows 32-Bit/64-Bit - Driver Market
Download now the latest and official Motorola USB Driver for Windows. We shared the latest Motorola USB Driver for Windows.
www.drivermarket.net
Reinstall driver and restart PC(mandatory),it should work then.
thunderman75 said:
Motorola USB Driver for Windows 32-Bit/64-Bit - Driver Market
Download now the latest and official Motorola USB Driver for Windows. We shared the latest Motorola USB Driver for Windows.
www.drivermarket.net
Reinstall driver and restart PC(mandatory),it should work then.
Click to expand...
Click to collapse
Tried that too several times but thanks for the suggestion anyways.
Took my time also this evening to reinstall a clean windows 32bit version, installed 32bit moto driver again from your link.
Reboot, nope
Same issue, RSD lite doesn't detect anything while the driver and device is recognized in device manager whatever I tried last 2 weeks.
I also opened the phone and searched on the motherboard for EDL test points, no avail too.
I think the RSD tool lite or the usb driver needs a update for this device or someone needs to find out how to get this phone into EDL mode. This can take months maybe years who knows lol
I just gave up and bought myself a new phone (xiaomi 13)