This message contains all postings in this thread
dated before January 19th 2003
Subject: XDA to IPAQ converter
From: Joe_PDA
Date: 14 Jan, 2003 22:15:19
Can someone list the correct pin to pin combinations for a
converter plug that allows me to use my IPAQ 3600 series
accesories on my XDA.
I've already got the 22 pin end (to XDA) and 12 pin end (to IPAQ
3600 Accessories) in a plastic housing, and I think I know which
pin number is which on each end.
I just need to know what pin numbers from the 22 pin side to
attach to which pin numbers on the 12 pin side.
Subject: Pinouts iPaq and XDA
From: XDA developers
Date: 15 Jan, 2003 00:23:43
The XDA pinouts are on our connectors page:
http://xda-developers.
com/connectors
The 12-pin iPaq pinout is at:
http://www.kh-gps.de/ipaq.htm
Subject: Okay I'm half way there....!
From: Joe_PDA
Date: 15 Jan, 2003 03:37:05
X Thanks for the reply. So exactly which pin from the 12 pin
side would go to which pin of the 22 pin side. Could you lay it
out for me?
I have seen on my trawls of the net a converter/ adapter.
Connect one end to the XDA.
Connect the other end to the iPaQ accesory. From memory it was only US$20. Not sure about getting that in Europe though.
Would depend on your requirements whether this would be of any use.
But imagine getting a gamepad hooked up!!!!
mMf
I got a few more requests for cable layouts, so I provided cable pinouts for both serial cables (to computer and to peripherals) as well as conversion cables between XDA on one side and both old (12-pin) and new (22-pin) iPaq accessories on the other.
http://xda-developers.com/connectors
Related
This message contains all postings in this thread
dated before January 19th 2003
Subject: Car audio
From: Jeffrey
Date: 28 Dec, 2002 15:59:37
I am trying to connect my nokia 8210 carkit to my XDA and I am
wondering if the car audio on pin 3 is a line out or a
loudspeaker out.
Furthermore anyone experience with connecting a 8210 carkit.
Mine has 2 wires for the audio of which one is the ground (I
assume).
TIA, Jeffrey
Subject: Pins on connector
From: Jeffrey
Date: 29 Dec, 2002 08:10:27
Another question I have is how the pins on the connector are. I
know whatthey mean, but I am not sure which one is pin1, pin2
etc. I assume -when I lay the connector down- that pin1 is the
first from the left and that pin2 is behind pin1.
TIA
Subject: Pins on connector
From: XDA developers
Date: 29 Dec, 2002 14:24:12
There's a really large and sharp picture on the connectors page.
Sheesh...
http://xda-developers.
com/connectors
Subject: Connector on cable
From: Jeffrey
Date: 29 Dec, 2002 14:52:14
Yes I know, but I am wondering how the pins are sorted on the
connector on the cable.
does it work?
In the XDA connetors section of this site the pinout is listed for making an IPAQ 36xx --> XDA adapter.
Do you need to connect to all the pins mentioned or just one?
For Example for GND, do I need to connect all of the pin nos. 2, 5, 16, 17 & 18 from the XDA side to both of the pins nos. 4 & 10 on the IPAQ side? Or just any of the XDA (GND) pins to any of the IPAQ (GND) pins?
Thanks.
I would just use one or two. If you're not charging through it, that should be fine...
Ive read many post on here and others. I must say Im confused.
Is the new Blue Angel connector physically the same as the previous XDAII connector?
Are the pin outs the same?
Some people say no problem, some are filing theirs down??? Some are "forcing it in" - YIKES
i would love to know as well
The pin outs are the same - the connector is physically the same size, but there is one minor change - there is a little 'step' on one edge of the connector.
XDAII accessories, such as chargers, usb and gps do fit but you need to be careful when you insert them.
Forget my stupidity. I used to own the Siemens SX56 and had hotsync and car charger cables.
The question is now I have the Siemens SX66, is it safe to use the same cables from the SX56? I haven't tried it since I don't want to kill my new toy!
If anyone knows or can verify that it's safe it would be really appreciated.
I am using car charger, usb sync cable and wired gps that were originally bought for my XDA1, then used on XDAII and now work fine on MDAIII.
Do any of the serial keyboards work with XDA IIs?
I tried to connect the stowaway keyboard I used with my XDA II but it does not seem to work with my QTEK 9090.
I'm only guessing, but I would think that the drivers weren't written for wm2003SE.
I have the darfon fold out keyboard that I bought for my sx56, and last night I got it working just fine with my new sx66, so yes, they work. I needed to go to darfon.com and download the newest version of the driver.
I have one of the IR keyboards and the supplied driver works fine, but I have to balance the MDAIII on something to make it high enough for the IR receiver on the keyboard because the MDAIII IR is on the side.
The pin outs are the same
Click to expand...
Click to collapse
They are not!!!!!
There is a voltage output from an XDAII when in a call, but the XDA IIs doesn't give the voltage!
Can't remember which pin off the top of my head but I have been testing this and found this to be a major problem when designing a proper car kit for both items!
..Spence
Bit worried about using my incar chrger from my xdaII for my IIs. Does anyone know where I can get a charger or usb sync cheaply for the IIs/pd2k? Expansys are charging £20! There's one here:
http://www.firstphoneshop.co.uk/o2-phone-accessories/o2-imate-pda2k.shtml
But i'm not sure its not just the old II charger...
Hi all,
I see birdog has put piccies up at:
http://forum.xda-developers.com/viewtopic.php?t=18435&highlight=pin+blue+angel
(and thanks btw) but can anyone confirm this pinout?
Cheers!
Does anyone know where I can buy the plug that plugs into the bottom connector for an XDAIIs?
I've asked everyone I can think of, searched Google, Maplin(UK) and Expansys and I can't find one.
It's probably because I don't know the correct name for it!
Ideally, I'd like one that has all 22 connections and even cables attached - they look really hard to solder onto by hand!
Any information would be greatfully received :lol:
Thanks
...Spence
http://www.gomadic.com/connectors.html sells connectors
Wallaby, Himalaya are compatible with HP iPAQ Connector Plug Assembly (19/22/38/39/41/43/51/54/5500 Series)
but read that the plug of BlueAngel is not exactly the same.
I purchased an XDA II car charger from the O2 shop in Manchester - it came with a plug that works fine with my XDA2s - have used it on the car charger and on the supplied power lead - charges fine.
When I got my IIs, it CAME with the plug already, any standard car charger can plug right into that plug and then the IIs... You sure you guys didn't get it?????
I think you mis-understood me - I'll try again!
I have developed a complete installed car kit for XDA, XDAII and IIs that does the following.
Mutes stereo when in call and puts all sound to front speakers
Can put navigation commands through the stereo
Hooks up to external microphone
Has PS2 (Holux) and RJ11 (TomTom and Leadtek) GPS connections
Charges device
I'm trying to get hold of a connector with 22 connections because I have one problem left.
To switch the car kit on, I either need a 5V feed from the device OR need to be able to put 5V in on one pin and get 5V out of another.
If anyone can help with either the connector or letting me know which pins I might be able to use send me a mail please
Thanks
...Spence
connectors
have you tried RS componets or CPC.?
i have a spare usb cable for hp6340 and no cable for my new spv m2000.
i want to transorm this cable and to make it work for the spv m2000. but i don't know wich wires to swithc or what to modify
i need some help please.
email at [email protected] me or reply here
http://wiki.xda-developers.com/wiki/Connectors
i save the xda pinout but i dont have stupid hp 6300 pinout
i save the xda pinout but i dont have stupid hp 6300 pinout
Orez at the base of the page on wiki you will see the ipaq equivalent pins, doesnt that help?
Also look here.
http://www.kolumbus.fi/ari.torpstrom/pinouts.htm
iPAQ H6300 series cradle connector pinout:
Pin out 22 Pin Cradle Connector iPAQ side.
1 V_ADP
2 V_ADP
3 V_ADP
4 V_ADP
5 Reserved – Do Not Use
6 Reserved – Do Not Use
7 Serial RXD
8 Serial TXD
9 Reserved – Do Not Use
10 GND
11 Reserved – Do Not Use
12 Serial RTS
13 Serial CTS
14 Reserved – Do Not Use
15 GND
16 No Connect – Do Not Use
17 USB Detect
18 No Connect – Do Not Use
19 USB – UDC +
20 No Connect – Do Not Use
21 USB – UDC -
22 GND
Shell tied to GND
cruisin-thru thx a lot man
cruisin-thru thx a lot man, i made it work