I have a Qtek 1010 64 MB:
ROM version 3.16.13 ENG
Radio version 3.19.01
Protocol version 32S54
I'm having the following problems with the phone:
1. Sometimes the device "hangs" when I'm making a call. It freezes completely, forcing me to perform a soft reset.
2. When I'm trying to call a phone that's busy, I don't get a busy signal. Instead, the connection is just dropped.
3. Sometimes my phone is unable to receive calls even though it shows a full strength signal. This also happens when I'm in areas where I know that the signal actually is very strong.
4. When I return from an area with no signal (eg my local supermarked which is in a basement), the phone does not regain the signal without a reset.
I've searched the forums and seen that other poeple have experienced similar problems, but I've not found any solutions. Does anyone know how to fix these problems? Would an upgrade of the radio stack solve any of them?
Try to update your phone bios.
The latest radio version is 4.21.00 and rom version 3.17.03
or try to install xda spec. edit. 1.2
Do you know that an upgrade will fix any of the problems? Or should I just try it and see what happens?
Related
Good Afternoon Ladies and Gents,
I am experiencing severe lousy reception with my XDA1.
Its quite surprising when im even outside all i get is one bar at all and still i experience call drops or jitter on the line during conversations
My Service provider is Rogers Wireless in Canada
My Device Information is:
ROM Version:4:01.00 ENG
ROM Date: 10/27/03
Radio Version: A.20.10
Protocal Version: 324e4
Is the best way sort out this proble is to upgrade the radio stack and how will i be able to do this.
Any help will be deeply appreciated
Regards,
Jeremy
Are you sure you have the right model for your provider?
There is a 900/1900 and a 900/1800 model of the XDA.
You can modify the 900/1900 to run at 1800, but with lousy reception. So maybe that's your problem.
Yes i do have the right model for my provider im using the 900/1900 currently my service provider uses 1900 band
Could it be the radio stack are my above specs fine or old
If your device is PW10B1 and ur using 1900 MHz and ur suing TMO 4.01.00 ROM, why don't you use RSU 6.25.02 ?
Note: RSU upgrade is the most risky action ... be extreamly careful.
Yes my device is the PW10B1 and I am using T-mobiles 4.01.00 ROM, how can i obtain the RSU6.25.02 radio stack and what is the safe process to upgrade this component.
You can find it here ... unzip the file, and copy the contents (4 files) to the \windows\startup directory and perform a soft reset.
Should I carry out a back up for precaution or should I procede with the upgrade
"better safe then sorry"
Just carried the upgrade and placed the files in my windows\startup menu actioned out the re-boot when i go to device information it still tells me my radio stack is still: A.20.10 is that right or the upgrade was not succesful
the correct directory is \windows\startup NOT \windows\startup menu
I have copied the files to the right destination folder when i do the reboot I ger errors
1: Cannot find RSU Upgrade
2: Cannot find RSUUpgrade.cp64
3: cannot find_ul_bs
then it launches into an exutable menu saying upgrading wireless device then it freezes there and returns to my start up screen I now have no connection or phone reception help please
How come you get such an error if you copied the whole 4 files ? ... It sounds like there is a copy error. Anyway, if it doesn't work, remove the 4 files and perform a hard reset .. it should be back to the old RSU.
I have managed to role back to my last known configuration but im still perplexed why it did not work any suggestions anyone
reception with Rogers.
When I bought my TMOBILE I was in LA. I moved to BC for work but got no support from TMOBILE so I upgraded to the XDA ROM to be able to change providers. I tried Rogers and found the same problem your talking about. I switched to FIDO and mine now seems to work fine and I get a great signal. Even the Wap works in the shopping mall. I would ask the XDA Developer Gurus if the stack upgrade is implamented into the new rom...then maybe talk to a different provider.
Dear all,
I have tested the WM2003SE (Version_2.06) for some days now and finally found out that one (or the combination) of these extra applications in the Extended Rom will surely KILL the phone functionality if you ever happen to soft-reboot the device while in landscape mode. Here is the list of suspected incompatibles.
- BTPSKeyUpdate_003
- cm_rm_map_o2_v3
- CprogHook.WM2003_2577
- DelAddStarMenu_092404.sa
- delshortcut
- LoadDialogInit_MS_10150402.sa
- startmenu_103wwe
I am absolutely sure that one of these will cause serious device hang once we ever happen to soft-reset while in landspace, but I'm not sure which one. So if any of you have these software installed in version 2.06, please try your best to aviod reseting while in landscape.
BTW, if you happen to know any of these software's intended uses, please also let me know since I"m not sure whether removing them can cause malfunction in other areas. Thanks
Hi there,
thanks for the alert. But i don have the problem like you said. I soft resetted my 2.06 more than 10x in landscape mode but still no reset/hang/idle/trojan virus.....
Guess i'm just a bit lucky!
:lol:
BTPSKeyUpdate_003 - cannot cause hang. It is used only once just after hard reset
cm_rm_map_o2_v3 - some O2 customisations. May cause hang.
CprogHook.WM2003_2577 - my program. Conflicts with some programs and may hang your device on boot (device simply stops responding to keys/stylus). To check this - delete \windows\startup\cproghook.exe and reboot. On most of devices it works fine, but have problems in landscape mode.
DelAddStarMenu_092404.sa - ?
delshortcut - ?
LoadDialogInit_MS_10150402.sa - this is a patch for 2.20CHS OS. Should not be used on other ROMs, but it should not hang your device.
startmenu_103wwe - ?
I've seen that removing SD-card during boot helps sometimes.
did any one faced this?
it happend twice!
my phone shows good signal reception but when some body calls in it will say "can not be reached" like it is off or no signal!
and i also can't make phone calls at that stage!
some thing is killing my phone!
i have tried both radio stack 1.14 and 1.18 and i happened in both.
now i am trying radio stack 1.14 from ROM 1.72! it seems it is not the same 1.14 from mamaich rom. by using hex editor i found that mamaich radio stack version is 1.14a!
what do you think guys?
BEWARE of changing ur radio stack.. 90% ur will have a dead phone once u wake up
Re: did any one faced this?
ammar said:
it happend twice!
my phone shows good signal reception but when some body calls in it will say "can not be reached" like it is off or no signal!
and i also can't make phone calls at that stage!
some thing is killing my phone!
i have tried both radio stack 1.14 and 1.18 and i happened in both.
now i am trying radio stack 1.14 from ROM 1.72! it seems it is not the same 1.14 from mamaich rom. by using hex editor i found that mamaich radio stack version is 1.14a!
what do you think guys?
Click to expand...
Click to collapse
Yeap, your suspicious is very true. Both of them are different. But how different is different would need mamaich to answer how he first got this radio stack!!
:lol:
i used 1.08 radio stack... no problems here.... downgraded it from 1.17
Microsoft Voice Command
Anybody encounter problems with MS Voice Command in WM2003SE ROM?
When I soft re-set the XDAII device, it sorts of hang the devices. Always need me to soft reset a few times. I've since remove it and soft reset is ok.
MS Voice Command in WM2003SE ROM
:arrow: MS Voice Command in WM2003SE ROM working great !
Hello all.
I can't get a stable phone signal in my QTEK 2020.
I installed WM2003SE 2.06 and I try'd radio 1.18, 1.14 and 1.08.
The 1.18 is the worst for me, the outhers work great in the first Hard reset.
When I first Hard Reset my phone, after the update of rom I get good and stable signal, but when I start installing some stuff on it, the signal becomes instable, and the worst is that if i'm on a low signal area and if I lose signal I have to soft reset the QTEK or enter flight mode and then turn it of to get signal back.
Anyone had this problem too?
I searched this forum and found some posts about this, but no solutions.
If anyone has any solution, please help me with this.
Thanks
first of all after hard reset , you said your phone signal is stable so it should be from the software you install later on. Try to test each software which one made your phone signal bad.
In some case the radio rom is the problem for me the best is 1.12 . I have tried 1.18 1.14 but I got unstable signal so I decide to use 1.12 instead. Another way to solve unstable signal is , the setting in phone option to use manual network instead of automatic and uncheck all the network that it is not your phone service provider network.
Thanks for your help.
I made all the ajustments that you told me, and the bigest diference that I notice is that when I lose signal, I recover it much faster than before, but the signal is still week.
Can you tell me where to get radio 1.12, I never seen it for download and I like to test it too.
Thanks again.
check your email
radio 1.12
I also have signal problems. lots of breaks
Can you please, also send me the 1.12?
Thanks
Thanks for the file.
I will test and then I post the result.
I've just upload radio1.12 rom to the FTP server . Get it there
(in himalaya folder)
I have also problems with my signal stability.
Can I also have the 1.12 radio version
I've tested all versions except the 1.12.
After testing the 1.12 radio, my problem is the same.
I Reinstalled the 1.72 Rom with radio 1.14 and it's a little better, the only problem is that now I have WM2003, not the SE.
I can't keep a signal connection with my SX 56 on Cingular. I soft boot and I can send and receive calls but after a while I have no signal and It won't work it again until I soft boot.
I tried running the band switching tool but when I start it it just says ERROR under "current" and does noyjing else.
Starts are
ROM: A.30.09 ENG - 01/01/04
Radio Version: 6.24.00
Protocol 324e4
HELP!
TIA!
Mike
i have exactly the same problem. i have been searching google, i couldn't find any solutions.
the only thing that you can do is to turn off the phone and turn it back on, (click on the signal icon to turn it off) that case you don't need to soft boot it everytime.
if you found a better solution, please tell me.
thanks
good luck
:wink:
before updating I have same problem, but now everything is ok and it's connecting by itself
ROM: 3.04.00 ENG (WM2K3SE)
Radio: 6.25
how do we obtain a WM2K3SE version?
where did you get that OS?
thanks
if you do'nt need surfweb via gprg just ask your operator to turn it off.
that's all
Hi eveyone
i m using Imate Jasjam (hermes100). i am having a problem with network signals. its just network shows dummy signals. cant make or receive calls.
it all happened when i upgraded it to WM6. i used Hard SPL v9. the rom upgrade was ok. except that it stuck at 100% and gave a message to recover. but the rom upgrade become successful. after that i was having issue of this annoying radio prob. i used radio 1.54.30.10 after that i m using 1.54.07.00. but no change is noticed.
when the radio stops working, i change the 3G setting at Comm manager to auto mode than to GSM mode an it failed to register to network and showed "No service"
Imate Jasjam (Hermes 100)
IPL 1.04
SPL 2.60 Olipro
HardSPL v9
OS Schap's WM6 pro 4.31 full
This is a very well documented problem with hermes. More and more people are starting to have this problem now.
I had the same problem and I got a new phone under warranty.
Most likely it is a radio hardware problem and probably you will need to have the motherboard changed.
If phone is still under warranty, just get it repaired by HTC. If not then you are probably out of luck.
My 2 cents
Help needed!!!
that is very odd.
my hermes is working perfectly ok except the radio. it has never been bricked. i have flashed it many times. tried all versions of Hard SPL. tried many roms. tried many radio roms. everything installs to the last dip.
but still no success regarding radio signal problem.
i have noticed that when one sim stops showing network, i put other sim having other network coberage and it works. but jus for 10 to 12 hours. after that i have to change it back. and it works for 10 hours. but it really getting me on my nerve
please share if helpful to me.
PLEASE ADVISE ME if i get my Hermes fixed by changing its mother board, should i go for WM6 and newer radio or not.
thanks