Hi dudes...
Im using PPC2003 and Radio Stack 4.21. My phone service provider is Portuguese Vodafone). The GSM system funcionality is GSM900.
My problem, is...
Someone play with my pocket, and he changed my gsm settings to 1800 (USA).... Now, i dont signal!!!! I cant enter in the phone settings to change the GSM Type...
How, i can resolve this problem??
Can anyone help me????
My e-mail is [email protected]
this happened to me when i was fiddling around with my newly uploaded WM2003 ROM. i just did a soft reset and everything worked out fine; went back to the original setting. and i think the phone looks for a signal or service once it's been rebooted. and if that doesn't work a hard reset is always useful.
and if you find the chap who messed around with your pda give him a boot in the bum :lol:
Hi dudes...
Im using PPC2003 and Radio Stack 4.21. My phone service provider is Portuguese Vodafone). The GSM system funcionality is GSM900.
My problem, is...
Someone play with my pocket, and he changed my gsm settings to 1800 (USA).... Now, i dont signal!!!! I cant enter in the phone settings to change the GSM Type...
How, i can resolve this problem??
Can anyone help me????
My e-mail is [email protected]
Click to expand...
Click to collapse
I haven't tried this, but enter your Bootloader (by holding down the power button and soft-resetting at the same time) Press the button for your Calendar (The one on the right of your ear-piece). You should see a 'Utilities Menu' In this menu there should be a 'GSM 900' option. Navigate to this option and press the 'Action/Enter' button. Soft reset if it asks you to.
Since I haven't done this before, I cannot comment on if this will solve your problem. Please make sure you backup the data on your device before messing with this option. It's safer that way.
THANKS!!!!!
IT WORKS!!!!!!
Thanks man... I dont really knew this options in the bootloader... 1001 Thanks....
You save my relation ship!!!! ehehehehehehehe :lol:
Related
Hi all,
i've got a slight problem with my XDA. After updating to WM 2003 (4.00.16) my GSM (3.23) seens to be broken...
It woked for a while and then out of nowhere. My XDA now wont boot. Th good news is that i can go into the bootloader.
What can i do now? Where can i get a good WM2002 image to put onto my SD Card? I'd appreciate any help!!!
Dear Fabi,
I know it might not be the suitable question, but could you plz tell the exact steps you did that led you to this situation. This is to allow you to get precise help, and to be a learned lesson for the rest of us, coz I was about to upgrade from 3.25 to 4.00.16 but prefered to ask first.
Don't worry, the guys here are way clever and I 'm sure you will get the help very soon ... TKR
Nooo problem. I was about to Sync my XDA via USB Cradle and noticed that my backlight was turned off. Also my Phone was searching for a Network (now I know why... :roll: ). So I thought it might be good to reset that thing..... *aghhhrrrr* That was a big mistake. After the reset I saw the boot screen and the backlight blinking twice. That was all. My Bootloader (5.15) says "GSM Error"... now I'm without Mobile Phone for a while :?
so in other words, 4.00.16 was OK but you screwed up the XDA by just doing a reset while the backlight was off ?? ... I 'm afraid I don't get it :?
Fabi said:
Hi all,
i've got a slight problem with my XDA. After updating to WM 2003 (4.00.16) my GSM (3.23) seems to be broken...
It worked for a while and then out of nowhere. My XDA now wont boot. Th good news is that i can go into the bootloader.
What can i do now? Where can i get a good WM2002 image to put onto my SD Card? I'd appreciate any help!!!
Click to expand...
Click to collapse
Confirming you used the SD card method to upgrade, right!
Also what radio band is or was your XDA set to before the upgrade?
HTH
No I didn't use SD Card to update my XDA. I used The ROM-Kitchen to generate a exe and updated over USB cradle.
Im running my MDA (i don't have a XDA ) on a german GSM 1800. Eplus. It was always set to this option and I never even tried to change it.
@biso007:
I screwed my MDA because I did a reset. Thats right. But I had some backlight issues in the past few days after upgrading. The backlight sometimes turned off and there was no chance to get it back on... only a reset. I first thought the proplem occured again yesterday but then i saw that my MDA was looking for network. After resetting the GSM part was dead....!
So back to my problem. I now ordered a SD Card Reader/writer. Is it possible to resore my system via XDArit and a backup? Can someone provide me a working 2002 backup from boot, OS and GSM part? Or can I do this by myself. I really appreciate your help!! Thanks a lot.
Ok I see!
Do this then press the green phone button, tools, Options, Band
and post whats listed.
and yes its possible to restore your system via XDArit and a backup.
As far a the 2002 PPCPE ROM goes you should be able to download it from T-Mobile, so visit their web site and search their MDA upgrade/download section.
HTH
Qman said:
Ok I see!
Do this then press the green phone button, tools, Options, Band
and post whats listed.
HTH
Click to expand...
Click to collapse
My MDA does not boot anymore! I can't get into windows and i can't sync anymore! I have the Radiostack and the 2002 image fram the T-Mobile Website but the image ist a NK.nbf. AFAIK XDArit needs *.nb1 Files? I also noticed that it seems not possible to write the GSM Part to the phone via XDArit.
Hiya Folks
I wonder if you could helpme with a bit of a problem, i have recently attempted to upgrade my XDA using the reccommended downloads from O2, this upgraded my ROM and the GSM part of the XDA. however when trying to get into my XDA it freezes, i can get into the bootloader but get a GSM error, am i able to flash the GSM, if so where can i get the flash and how would i carry this out. i have got into the GSM part of the bootloader and the GSM will not turn on. i have tried copying the GSM from a friends XDA only to find the message "please connect to RS232 and run PC monitor now"
Hope you can help
Cheers guys, you are truly more useful than the folks who we obviously look up to at O2!!!! Mind you this does not say much!!
Thanks again
Dave
where can i find the wm 2003 upgrade file for qtek 1010
where can i find the wm 2003 upgrade file for qtek 1010.
plz can any body reply to me at [email protected]
i want to upgrade my qtek1010 2002 wm to 2003 but could not find it .
can any body reply to me at my email
please help, ive upgraded the rom from the o2 website and it has lost all the O2 software on the phone (which may not be a bad thing) but it has lost all the pre installed connection settings for the internet.
any ideas how to solve this or reset it back to its original rom settings
cheers guys
dazza
A hard reset should restore the settings, I dont understand why the settings are missing, did it go through the auto configuration routine where you choose your country and gsm/gprs prepay etc.?
Hi Dazza,
Mine did the same. I just have "USB v1.01" on the screen whilst it's in its USB cradle. If I take it out it displays "Serial v1.01". Pushing the Hard Reset buttons, and even removing the Battery just results in the same display.
Have you resolved it yet please?
Desperately yours,
Andy
It's mean you have fail to upgrade your Xda II ROM. Anda the ROM have been formated. You can put the Xda in the cradle, and run the original ROm 1.60.44. Good luck!
Hi !
Can anyone help me ? My IE on my PPC 2002 doesn't work properly because when I enter the web address and tap Go, nothing happends. Before when I tap go, the dialog box appears to input username and password but now it doesn't appear and doesn't connect. Connection for dialing is OK.
I always meet this problem when I install many softwares onto my PPC2002. If I do the hard reset, it can connect properly.
Thank in advance,
it seems that one of your installed s/w updates the registry keys for the defauly connection link (GSM or GPRS). Try installing them one by one after hard reset and test IE in each step
Biso007 said:
it seems that one of your installed s/w updates the registry keys for the defauly connection link (GSM or GPRS). Try installing them one by one after hard reset and test IE in each step
Click to expand...
Click to collapse
Have a look here...
http://forum.xda-developers.com/showthread.php?t=371532
Hi all,
Hope I may be of help to those who have GSM Error on their Wallabys. I have almost given up hope but I just searched the threads. This is basically what I did:
1. Download xda developers special rom and re-flash via sd card
2. Hard reset, press contact and calendar buttons (or a combination of both), volume button, and soft reset will bring you to the today homescreen (I cant remember exactly what buttons I pressed, I just pressed them all)
3. Re-boot phone, you will notice you still have no radio but you can now enter today homescreen (please take note the "start" menu is not there)
4. Align screen / stylus. You can do this by pressing Action Key then Calendar button.
5. Press Contact and Action Key (both) several times (I think around 20 times). You will hear clicking sound. This will bring out the "start" drop down menu. If it does not pop out, repeat again.
6. Download the correct RSU for your phone. Save into SD and copy to programs (same procedure as in wiki)
7. Run the RSU program, expect to fail at 1%. Re-boot. this time you will be able to active sync your phone again. (my wallaby did to my surprise)
8. I gave up on the RSU 4.16 (after countless tries) and I downloaded RSU 4.21 from xda-developers ftp (exe file) since I am now able to sync to my device.
9. Install RSU upgrade to your device, the phone will automatically re-boot.
10. Surprise! I was able to re-flash the RSU! (I think the problem is the RSU 4.16, try other 4.xx instead but be careful to use the correct version)
Now my Wallaby is up and running again! Thanks to xda-developers and Wiki and to Lumpi. There is no secret. I just did a lot of reading from the threads. It's all there. Good luck guys! Merry Christmas!
why ur wallaby resynched....
The reason it re-synched.... is because... when u go to the wallaby bootloader... and go into the GSM menu's (that allow u to tun off and on the gsm... and band tests... the key to it is there.... just reset those puppies at least 1nce.. then when u reset and boot... voila... it will sync,, but... I'm still stuck on that 1% error... rsu failed!! so.. wish me luck... oh.. btw.. when u get the 1% error it will not sync again until u repeat the process at the wallaby bootloader... so... any ideas anyone>> to get past the 1% error? I've read up and down ... searched left and right here... but no luck yet... I'm still trying what was posted here... so... wish me luck.... !!! oh... question what version is ur wallaby?? PW10A or B?
Re: why ur wallaby resynched....
r5pete said:
The reason it re-synched.... is because... when u go to the wallaby bootloader... and go into the GSM menu's (that allow u to tun off and on the gsm... and band tests... the key to it is there.... just reset those puppies at least 1nce.. then when u reset and boot... voila... it will sync,, but... I'm still stuck on that 1% error... rsu failed!! so.. wish me luck... oh.. btw.. when u get the 1% error it will not sync again until u repeat the process at the wallaby bootloader... so... any ideas anyone>> to get past the 1% error? I've read up and down ... searched left and right here... but no luck yet... I'm still trying what was posted here... so... wish me luck.... !!! oh... question what version is ur wallaby?? PW10A or B?
Click to expand...
Click to collapse
hello..
did you find a solution for 1% error? I have the same issue and I tried all night...and day...and nothing (
Reflash via SD
Hi morph751,
Firstly, thanks for this, I have now finally got my Wallaby back to a state where I can ActiveSync it, and actually run programs on the thing. Unfortunately, the RSUupgrade continually faults at the 1% mark both version 4.16 and version 4.21. The one step in your instructions that I did not follow, was the first "Download xda developers special rom and re-flash via sd card". The problem with doing this, is that when cold booting with the SD card in the slot the device simply hangs at the GSM Error screen. I have bootloader version 6.22, so I assumed this was due to the post 5.17 SD card locking. But the info and utility to bypass this doesn't seem to help either.
Is there something fundamental I am missing in terms of being able to boot the device into a mode that will allow me to flash it via SD?
By the way, when trying to flash the device via Program A, it fails with an error indicating that the power cable is not plugged into the device. The device is in the cradle, with USB connected and power connected to cradle.
OK, by folllowing the instructions at http://forum.xda-developers.com/showthread.php?t=245282, I have been able to sucessfully flash the device to XDA Developers special ROM image 1.2. But I still get Program B failing at 1%, using version 4.21. Has anyone managed to overcome this, if so how? Thanks in advance for any help.
If anyone can help me I just brick my ameo. I download olipro unlocker followed steps had everything done but after i finished the 1step it wont boot up again its just dead. tried hard reset alot of times wont even go pass it . it just light green.Pls help
Can you enter the Bootloader mode?
Press Camera Button (completely) and hit the reset button at the same time.
i know yor problem press cambutton and powerbutton for at same time so you will come to the bootloader modus now plug in your usb cabel to your device and your computer now open the image of wm6 that you want to install the setup will find your ameo now
hope you will get it
good luck from germany and sorry my bad englisch
Thank you that Fixed it. I just panic but now the whole process was finished. from 1-3 now. thank you for the reply
please help.
I have the same probleme and i can´t enter the Bootloader mode.
remove sim and storage card then do as mosho said
ie press camera, comms button and reset button then restore original rom , then olipros program
as per the wiki
http://wiki.xda-developers.com/index.php?pagename=Athena_Resets
cant get into bootloader
hello,
i cant get into bootloader at all.
i removed the sim and the memory card, al i get is a short flash of red light t the joystick, and only if the device is connected to the power cable.
it doesnt charge, it does nothing. i tried really everything.
does anybody have an idea?
thanks
mike
try a service exchange at t-mobile. there seems to be something wrong with your device.
my ameo had no probs running olipros unlocker.
regards dieter
i used the unlocker with another ameo i bought, and it worked fine.
so i tried the same with the 2nd, and it crashed.
will they find out that i tried to unlock the device?
regatds
mike
ameo dead
Hi mikekarl
we have the same problem that happened to me today.
i have done it before with another ameo worked fine.
Now i cant get into bootloader or Hardreset.
and i cant try a service exchange because iam not t-mobile customer.
Pls help