Hey guys:
Quick question. I've got a bunch of apps registered on my phone. Every time I flash a new ROM I need to reenter all of those serial numbers. I was looking at the UC customization threads to see if maybe I could just create a provisioning XML to create the appropriate registry entries automatically. Problem is don't think all the apps store their registration information in the registry.
So a couple questions:
1. I've found a good way to see registry changes (and thus figure out which keys I need to update), but I can't find the equivalent for the file system. Is there a tool that can take a snapshot of the file system on the phone, and then show diffs of the current file system with that snapshot? (That way I could figure out the additional files I'd need to copy over to make apps think they're registered.)
2. Is there another mechanism, other than registry and file system, that apps use to set themselves as registered? I couldn't think of anything... but then I'm hardly a hacker. (Even though... and correct me if I'm wrong... this is not technically hacking -- the serials are valid, I just don't want to reenter 10 of them every time I flash)
3. (And this probably belongs more in the UC thread): for some reason my provisionining file has no effect whatsoever. I've verified syntactical correctness of the file, and that cabarc can successfully create a CAB out of it. I've verified that the file is "installed" during the customization step. Yet, after a reset I see none of the changes specified in the provisionining xml. Any idea how I can debug this? Is there a log file that the config program leaves somewhere?
Thanks!
Hi probably not many will take advantage of this app, but it is definitely adding some functionality to WM which normally this system is lacking. Mods please conciser that this topic is not about networking using this program but translating the program (hacking exe file) so in my opinion it should be in this section.
What is it for? PPPoE is an application to connect to wifi network with Point-to-Point Protocol over Ethernet authentication. http://en.wikipedia.org/wiki/Pppoe
There is no other application like that for Windows Mobile, at least I could not find it The only one that exists is made by NTT DOCOMO in Japan and is in Japanese
http://flets.com/spot/pdasetup_download.html
Since I'm not a programmer and I simply cannot create application like that I decided to try to translate it to English with help from online Japanese to English translator and BeeGee_Tokyo who helped me by translating parts where online translation failed THANK YOU!
How to start:
Install PPPoE.cab file on your device, it will create folder inside program files, name of the folder is in Japanese and if you are using wwe version you will see squares, you can safely rename this folder to PPPoE or whatever you want, the same with original exe file (you can delete it if you want). Please put my modified exe inside this folder (it is in PPPoE.zip file). I'm testing this program on my Topaz with WM6.1 TESS 2.2.1 but program might be device and system specific so it might not work on your device at all. You can also change .lnk file inside \windows\start menu\programs to correspond exe file name change.
Things left to do:
- translate last missing bits if possible,
- find a way to create a cab file with embedded translated exe, till now MSCEinf and WinCECabManager are unable to help me with that anyone can help?
- test the program in real life environment PPPoE authentication over wifi (I don't have access to such network at the moment) and on what devices it works.
UPDATE - Probably final translation, corrected some minor mistakes, still I can't find a way to translate one error page and about page but program is fully functional now, have fun.
Translation
I am sure this is not perfect, but it should be good enough to understand the program.
Most of the translation is done by Google I just corrected grammar a little bit and translated Katakana words, where Google usually fails.
Thank you BeeGee I corrected most of the problem I had with online translation thanks to you so program is ready, I will apply some minor changes and upload final version soon.
It doesn't work on my i780 even if i rename it like the japanese one (wich works)
I think it is some kind of problem with certificates or security policies or signing of the program, I'll investigate this and will let you know.
certificate error
shamus said:
I think it is some kind of problem with certificates or security policies or signing of the program, I'll investigate this and will let you know.
Click to expand...
Click to collapse
Hi!
I need this program because my adsl "router" (of Telecom Italia) have locked configuration..
I have htc touch pro with original Rom 5.05.408.1 ITA and when I launch your translated program, Windows return a certificate error!
mmmh I have question for you..
Can you create a PDF with screenShot in English and japanese for each window, so we can use the japanese version?
thank you very much!
bye!
Any news? At least, can you post screenshot of yours so we can use the japanese one?
Stuck at PPPoE AC discovery search
Well, I tried this program and ran it successfully. I entered all the necessary info n also changed the MAC as required using mtty. But when i connect it says connecting and gets stuck at PPPoE AC discovery search. I can connect with my notebook without any problem over wifi.
Anyone has any idea about it? anyone successful?
Chinese client ???
In search of PPPoE client I saw this chinese forum. They have mentioned a lot about registry editing as well. However I cudnt download the file they hav mentioned. If any kind soul can download and post the file along with proper instructions here it will be very helpful for guys like us....
http://bbs.pdafans.com/viewthread.php?tid=429157
google translate:
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://bbs.pdafans.com/viewthread.php%3Ftid%3D429157&ei=VVnVSvvjNoP06gOU3vmzAg&sa=X&oi=translate&resnum=10&ct=result&ved=0CCgQ7gEwCTge&prev=/search%3Fq%3Dpppoe%2Bin%2Bppc%26hl%3Den%26sa%3DN%26start%3D30
Another one is here:
http://bbs.pdafans.com/thread-431092-1-2.html
google translate:
http://translate.googleusercontent....le.com&usg=ALkJrhhjMBmee_s-HlEMBhEEbOJtCfSkNw
http://rapidshare.com/files/292887833/PPPoE.rar
Here's the file
Edit: and here's the file in the 2nd link you provided
http://rapidshare.com/files/292895209/PPPOE_2_.rar
Re-edit:
I installed the cab in the 2nd link, i succesfully (erm..) configured the registry and the pppoe.txt but when i try to start the connection i get a "Error from RasDial" error...
I succeded in getting your exe working, you only need to remove the signature. I used this tool http://rapidshare.com/files/300851964/1206597606_72079e82.zip
please post a working file here.... thanx in advance
This one works for me
Greattt!!!
hey that's great.. u got the working file!!!!!! I wish i cud try but unfortunately I'm out of my town so cant test ur file Will do it once i'm back....
@baiggee2, Can u pls post ur findings??
Thanks guys!!!!
yythanks very much
Hi all.
I can't get it to work with my mobile cel. The program works, it connects successfully, but i can't use any browser. The "PPPoE adapter" it's "not connected" and without any IP assigned....
any help? Does this program works for you?
TIA
Buddies, i have tried and connects succesfully but still i cant surf the internet here is what i have done previously on my HTC S620:
1>Installed original cab file
2>Extracted Translated file on SD card
3>Then I edited the registery settings
3.1>Go to HKLEM>>Comm>>NTTPPPoE>>PDAConTool>>SSIDList
3.2>Create a Key Folder Name "Item02"
3.3>Create "DWord" Value Name It As "Spot" And Change The Value to "3"
3.4>Create "String" Value Name It As "SSID" And Change Its Value To Your Current Router "SSID"
4>Now Change The AP Connection Settings In PPPoE Application To Your Router "SSID" Created. (See The Pic Below)
5>These Steps are Neccesary Becoz This Application only allows users to connect only NTT-West And Fletspot Users. If You Change Your Router "SSID"
To "Fletspot" Or "NTT-West" It Will Not Work Becoz If You See Its Registry Settings It Contains "Encryption Mode" And "Encryption Key" Strings Too Which We Donot Know.
6>Finally, It Connects Me Successfully But Still It Cant Find The Way To Surf Net!
PPPOE Connection for C905 mobile
Dear all,
I am looking for aan PPPOE application for c905 mobile phone. I am not getting internet connection as soon as connected to WiFi even in laptop. I have to connect the PPOE connection. So I need same for mobile also...
Please help me...please
ilMessia said:
This one works for me
Click to expand...
Click to collapse
it didn't work for e. it says stop services, then a window appear that say restart to make changes! then when I tap on ok, it restart and nothing happen!
it didn't install any thing. I run it in my diamond2 wm6.5.
from where I can access the pppoe settings?!?!!
baiggee2 said:
Buddies, i have tried and connects succesfully but still i cant surf the internet here is what i have done previously on my HTC S620:
1>Installed original cab file
2>Extracted Translated file on SD card
3>Then I edited the registery settings
3.1>Go to HKLEM>>Comm>>NTTPPPoE>>PDAConTool>>SSIDList
3.2>Create a Key Folder Name "Item02"
3.3>Create "DWord" Value Name It As "Spot" And Change The Value to "3"
3.4>Create "String" Value Name It As "SSID" And Change Its Value To Your Current Router "SSID"
4>Now Change The AP Connection Settings In PPPoE Application To Your Router "SSID" Created. (See The Pic Below)
5>These Steps are Neccesary Becoz This Application only allows users to connect only NTT-West And Fletspot Users. If You Change Your Router "SSID"
To "Fletspot" Or "NTT-West" It Will Not Work Becoz If You See Its Registry Settings It Contains "Encryption Mode" And "Encryption Key" Strings Too Which We Donot Know.
6>Finally, It Connects Me Successfully But Still It Cant Find The Way To Surf Net!
Click to expand...
Click to collapse
Hi I was not looking at this tread for a while, all registry changes are completly unnecessary if program is working. Of course you need to setup new connection with your own network instead of Fletspot or NTT-West. How to do it? Just click menu/new network and that is it, you can add your own network but to do it of course you need to know login and password, that's how PPPoE works, if you don't know it than this program will not help you in any way to create connection.
This a small application I wrote to automatically retrieve the DeviceID on your PC without having to open the registry editor. It can also create the DeviceID.txt file with the id value stored. It's written in Java so it requires JRE to be installed (most of you already have this)
http://rapidshare.com/files/403680176/DeviceID.jar.html
Make sure you have Sony Ericsson Update Service installed otherwise the device id will not be created in the registry
UPDATE: App updated to show all Device Ids stored in the registry
still dont work for me
windows 7 x64
It's been downloaded too many times (10) for a Free Rapid Share account, it is no longer downloadable, you'll have to upload elsewhere
Balur said:
It's been downloaded too many times (10) for a Free Rapid Share account, it is no longer downloadable, you'll have to upload elsewhere
Click to expand...
Click to collapse
new link posted
Hi !
As you can see I have more Strings in the registry ?
Whats your methot of determining which is the right one as they all show different DeviceID Strings ?
THX
pietropizzi said:
Hi !
As you can see I have more Strings in the registry ?
Whats your methot of determining which is the right one as they all show different DeviceID Strings ?
THX
Click to expand...
Click to collapse
I always get the first one, there is no way afaik to determine which one is getting used at any point. I can maybe change it so that it displays everything and lets u select the one you want to use
Well the point's not what I want to use, it more what's the right one at time of flashing. Is it save to delete those keys so the right one is rebuilt inn case of reconnecting the device ?
it's really not easy to find which one is being used at any point. i don't know if it's safe to delete them from the registry, although i would suspect that it is. just make sure you use the same usb port whenever you flash. that way you avoid overcomplications with this issue
THX for the info. I'd try to find out the right one.
In my case it was the second key found, not the first!
So this tool does not work for everyone.
I have just bought an unlocked T-Mobile version of HD2. I have not seen a way to enter my owner information - something required for registration key of a lot of software. Is this deliberately left out of the T-Mobile ROM? What am I missing?
maybe this:
http://www.jayceooi.com/2010/01/13/how-to-set-htc-hd2-owner-information/
or this:
http://forum.xda-developers.com/showthread.php?t=614366
or
perhaps google
Another way
You can unhide Owner information function in Registry
Go to
HKEY_LOCAL_MACHINE\ControlPanel\Owner\Hide
in the registry and change the 1 to a 0
Do a soft reset
Now go to Settings>All Settings>Personal
Here you will find the previously missing file "Owner Information".
Owner information
p107r0 said:
maybe this:
http://www.jayceooi.com/2010/01/13/how-to-set-htc-hd2-owner-information/
or this:
http://forum.xda-developers.com/showthread.php?t=614366
or
perhaps google
Click to expand...
Click to collapse
Problem solved. Thanks a million!
Hi all!
I am very curious if anyone here can give me a push in the right direction...
Let me start by saying that i have made an excel sheet in windows for the purpose of administring my mail. I scan my mail and name it in de sheet accordingly. F.e.: filename 2018-02-015.jpg is in excel as follows:
column A: 2018-02-015. Column B "jpg". In that way i can numer the files continuesly, but can select different filetypes (f.e.: pfd, msg, docx etc...) along the way. Now....
I use a formula to calculate the complete filepath so i can click in the cel to open the file. In windows this looks als follows:
=HYPERLINK(TEKST.SAMENVOEGEN("C:\Data\CloudStation\Post\gescande stukken\Inkomend\2018";A5;".";B5); "doc")
I use a duch version of excel... sorry... "tekst.samenvoegen" is probably "concatenate". Now... if the file i link to exists in the location mentioned in the formula, windows opens it flawless.
You might have noticed the term cloudstation in the path. That's because my goal is to sync with my mobile. That's the part that works already. But since i do not have the same paths on my Phone as i have in windows. I had to create another comlumn for the sake of opening files on android. At the moment i can open the sheet on android, look up the line i need and then navigate manually through the filesystem to open it. But it would be really neat if i could (just like in windows) click on the file in excel en open it that way.
What i tried is the following:
=HYPERLINK(TEKST.SAMENVOEGEN("/storage/0123-4567/Android/data/com.synology.dscloud/files/Data/Post/gescande stukken/Inkomend/2018/";A5;".";B5); "and")
since the name of the SD card seems to be 0123-4567 and the files i want to call upon also exsist in the target dir. i think it should work. But since i'm more of a windows man i'm afraid i'm overlooking something.... Android tells me that the link is not valid or i'm not authorized tot open it...
Who can halp me along? Thanks in advance!
kind regards,
some dutch guy