Hi All,
Just received back my 32MB XDA, exchanged by o2 service, due to screen failure. The new item turns on its orange light for charging and after a minute goes off!!!
Checking the device info, it has the 3.14.13 ENG ROM & the 4.08 Radio. Could the old ROM has something to do with it or should I return it again to them?
Advice is requested by the Gurus...
THX
Gear
Personally I would send it back if it isnt perfect and operating correctly.
Just noticed though -in the meantime- that the light turns off when charging through its separate adapter, when the battery is fully charged.
On the other hand, when charging on the craddle, the light turns green when the battery is fully charged!
If somebody knows if this is normal procedure, please let me know.
THX
Gear
Related
I have and o2 XDA (wallaby) that will not turn on. When in cradle the battery light is red and after a short while the screen starts to flash (white) on and off. Anyone had this issue before or got any helpful suggestions?
Thanks
Yes,
i had that problem before it the battery either its completely dead ( meaning no longer chargeable ) or its not making contact with the main board, either way you'll have to open it up.
Good Luck
Phone-Geek
Hi,
I replaced the battery to my faithful qtek 1010.
Following instructions how to disassembling the device, I had no problem. Then I inserted the sim, no taking care too much ....
As I turned on the device under the charger, I was requested to set up the display. Then I was requested to insert the sim. I lifted it a bit more and then the display scrambled, until it switched off.
The sim was inserted in the wrong way! From then, I'm no more able to power on the device. I didn't want to try too much, hoping the charge was shortcircuited. I think to try with usb cable tomorrow. But I do not trsut too much, I'm afraid something of unrecoverable occurred to the device.
Is there anyone able to give me some hints??
Thanks a lot
Alex
New Try
I deassembled again the 1010, detaching the battery. Battery is not original.
Then I connected the charger while I was pressing the soft reset and I saw a quick light coming out. then nothingelese. I reproduced it everytime I inserted the connector while pressing soft reset.
So I think 1010 is not fully dead, but I do not know what step could be useful to improve.
Any hint will be appreciated
thanks
Alex
Update
Last night I left the device attached to the charger. Nothing occurred so I detached the charger. I shortly lifted the connector from one side and the screen turned on with red led on (orange when it is charging, green when it is charged, lighting when it has gsm signal).
So, I still have some hope to fix it. Does anyone any hint what and how to check the charging hardware)
Thanks
Alex
HI,
I purchased Touch Dual from UK as SIM FREE unit last year. Couple of days back i checked the HTC web site and saw the WM 6.1 upgrade from HTC available there; So yesterday i downloaded that file i.e. " RUU_Nike_HTC_WWE_2.09.405.1_Radio_NikeMR_1.65.28.25_signed_Ship " and upgrade the device.
At the time of running the RUU the unit battery level was 70% and after the upgrade the battery was almost 55%. So i kept using the device and that was perfect. Anyhow i forgot to recharge the device and next morning i realised that Unit went off somewhere during the night. So i simply attach the charger cable with device but immedately i realised that the usual orange light hasn't turned on and after a while the red colour light shows up instaed of orange. Upon seening this i try to turn on the device and its turned on BUT went into AEROPLANE MODE automatically and stays there. And above all the BATTERY ALWAYS SHOWING THE CHARGE LEVEL IS 0% besides the fact that unit is continiously charging from the last 24 hours....
And if i remove the charger the becomes dead..
Any suggestion would highly appreciated.
This can mean two things:
1. Your battery is broken
2. Your charger doesn't work well (I had this with a blackberry charger I borrowed from someone)
The second is the easiest to check if you charge it with a usb cable instead of the charger you can see if it works or with another charger of course. It switches to airplane mode when the battery level is to low so don't worry about that. The led is red when it really has no battery level at all so also nothing to worry about
Good luck.
wmn79 said:
This can mean two things:
..... nothing to worry about
Good luck.
Click to expand...
Click to collapse
Thanks for the suggestion. The problem is solved ... Now i know that if battery went to ZERO level than one must remove the SIM and charge the unit.... for atleast the initial 10% charge level... after that insert the sim into unit...
Anyway Thanks again
Hey...
My Mozart seems to have stopped working. The battery run out this morning when I was in university and ive just got home and plugged it in to find that the red led is flashing up the top! Its flashes for a while and HTC comes onto the screen, it then shows an image of a battery on the screen then nothing, no lights, no charging, no booting.
Help!
i see well that happened to me, you seem to have drained the battery. the best solution is..
keep it charged for a while..
if it does not work.. remove the battery for a while then bring it back and charge again,
just let it charge until the battery regains enough power to boot the phone.
never let the battery fully down /!\
the smartphone Have to be charged before the battery nearly 30% otherwise u Will deteriorate the lifetime of u'r battery
Hi, I would like to know if the problem was the battery or hardware related? I am having this same problem and Im about to go to the phone shop to get this looked at... after being on the phone to someone who speaks the worst broken english for 20 minutes!
Thanks.
Hello, I just received my Galaxy S2 I9100. As the instructions suggested, I plugged in the charger before powering up the device. Its almost 2.5 hrs of charging and I see the charging battery icon remains at 0. I dont see it charging at all. In addition to that, I sense there is quite some heat generated near the camera LED area during charging.
Please advise if there is any work around or should I return this device.
Please help!
If OOB doesn´t work as it should, i always send it to RMA.