Hi,
is there any way to deinstall or deactivate the Internet Explorer on a T-Mobile MDA with Pocket PC 2002?
ciao, max01
Microsoft would never let you do that!!!
I removed it and the unit would not work at all. Had to do a full reset
Try thunderhawk browser and you will get a better user experience, but IE is so embedded in the OS of all their PPC, WinCE and WM2003 is not funny...
Why do you want to remove it??
I have a MDA Vario and I was Wondering
Which navigational program can I use / install on my Vario?
And where can i get it? :lol:
TomTom can be a pain to get installed and running. Search the forums for further advice. It took me a couple of attempts. Once installed it works perfectly. Get the scamera, sorry saftey camera database from www.pocketgps.co.uk it enables you to have appropriate warnings. e.g. 30mph warnings at 30 mph sites, 50mph warnings at 50mph locations. I have to pass 7 cameras on different speed roads each journey into work and it is nice to have a reminder where the sites are to allow me to check my speed. I have no experience of other SatNav software but there are some comprehensive reviews on the pocketgps site.
Al
TomTom on MDA Vario
How did you manage to put TomTom 5 on a Vario? Every time I try I get a set up application error and asks if I want to send a report to Microsoft. I tried to install 3 and that failed as well.
Any help is appreciated.
Thanks
Nich
There are better people to guide you through the steps necessary than me but this is what worked for me. Don't use the TomTom installer from CD. Extract the cab files from the CD, I use Winrar on my PC to do this. Copy the cabs over to the vario. Using a file explorer on the vario create the following directories. \tomtom, \My Documents\TomTom, \Storage Card\TomTom, and finally \Storage Card\zip. Copy your map to \Storage Card\Great-Britain-Map\. Copy Great_Brittain.Postal to \Storage Card\zip. Tap on the cab files one at a time. I don't think it matters which order you do the cabs. I soft reset between cabs but again I don't think this is essential. Once all the cabs have installed, DON'T start TomTom. Go to setting>connections>Bluetooth>Devices and setup a new partnership with your GPS unit. Tab to COM Ports and create a new port for the GPS. Leave Secure Connection unchecked. Mine is COM6. Using a file explorer, I use TotalCommander go to \My Documents\TomTom and edit CurrentMap.dat to point to your map folder on the storage card. Soft reset and when the vario is backup start TomTom from the startmenu. When asked to configure GPS choose Other Bluetooth and then COM6. I found it helped to be outside with a good satelite lock prior to this last step. TomTom will automatically turn on Blurtooth for you and switch it off again when TomTom is closed. TomTom does take an age to come up after tapping the startmenu but once running it is pretty responsive. If you overclock with OmapClock TomTom does come up quicker but it is still the slowest program on my vario to launch. If you need further help just shout. I will try to find the exact list of extracted cabs I used. I do know that the English Female voice is voice05.cab.
Al
Thanks for all this, unfortunately it did not work. When I tried to execute the cabs files, I get the message installation was unsuccessful.
Thanks for your help anyway.
Nich
rephrase:
Ok, installed the cab files per your instruction and also created a new partnership between my gps receiver and my MDA. It appears only serial 6 and 7 show up on mine and they both used. Am I suppose to creat a new serial port the GPS device? When I try to do it, it still only shows up 6 or 7 and it won't allow me to use neither.
Also, where do you put the voice file? I presume that is not a cab file.
Still trying to get mine to work. Almost there...I hope.
Thanks.
wizzzard said:
There are better people to guide you through the steps necessary than me but this is what worked for me. Don't use the TomTom installer from CD. Extract the cab files from the CD, I use Winrar on my PC to do this. Copy the cabs over to the vario. Using a file explorer on the vario create the following directories. \tomtom, \My Documents\TomTom, \Storage Card\TomTom, and finally \Storage Card\zip. Copy your map to \Storage Card\Great-Britain-Map\. Copy Great_Brittain.Postal to \Storage Card\zip. Tap on the cab files one at a time. I don't think it matters which order you do the cabs. I soft reset between cabs but again I don't think this is essential. Once all the cabs have installed, DON'T start TomTom. Go to setting>connections>Bluetooth>Devices and setup a new partnership with your GPS unit. Tab to COM Ports and create a new port for the GPS. Leave Secure Connection unchecked. Mine is COM6. Using a file explorer, I use TotalCommander go to \My Documents\TomTom and edit CurrentMap.dat to point to your map folder on the storage card. Soft reset and when the vario is backup start TomTom from the startmenu. When asked to configure GPS choose Other Bluetooth and then COM6. I found it helped to be outside with a good satelite lock prior to this last step. TomTom will automatically turn on Blurtooth for you and switch it off again when TomTom is closed. TomTom does take an age to come up after tapping the startmenu but once running it is pretty responsive. If you overclock with OmapClock TomTom does come up quicker but it is still the slowest program on my vario to launch. If you need further help just shout. I will try to find the exact list of extracted cabs I used. I do know that the English Female voice is voice05.cab.
Al
Click to expand...
Click to collapse
There are lots of posts about this problem on this and many other forums.
In brief - only TT V5.21 works on a WM5 ppc.
If you add an extra outgoing port for BT on either 6 or 7 TT V5.21 allows them to be used, V5 does not.
see my post here http://forum.xda-developers.com/viewtopic.php?t=43412 for full install instructions.
I used your instrctions and got it up and running in no time. Tnx for that. It works great.
pewe said:
There are lots of posts about this problem on this and many other forums.
In brief - only TT V5.21 works on a WM5 ppc.
If you add an extra outgoing port for BT on either 6 or 7 TT V5.21 allows them to be used, V5 does not.
see my post here http://forum.xda-developers.com/viewtopic.php?t=43412 for full install instructions.
Click to expand...
Click to collapse
See additional solution here : http://forum.xda-developers.com/viewtopic.php?t=46634
v5 with BT and maps.
crashing when setup
hi ive just got my copy of tom tom and have installed both the standard and update.
when im trying to do my initial setup it crashes when i choose the map i want to use. i ahve no idea why?
any help?
p.s. it does work perfectly fine on a wm2003 pda
I would guess you are not using a copy from a shop!
Sounds like you have a file missing.... You need to create a directory \My Documents\TomTom
Then create a text file called Currentmap.dat with the following in:
! \Storage Card\Great_Britain-Map\
assuming you are using the UK map and its on your storage card.
Transfer this file to your device and then start TomTom and you should be ok.
Car Navigation System required: London Taxi Company
HI ,
We are a taxi company Hummingbird Cars in London. We provide Airport Transfer service from all london airports.
We have recently started our new business and we require to buy Car navigation system or Tom Toms . Can anyone suggest which company is the best and where we can get the best deals.
http://www.hummingbirdcars.com
Thank you
Alex
New ExtROM for Telstra iMate. Has the new video viewer so you can watch Foxtel etc. Probably some other bits and pieces that I haven't had time to take a look at.
http://www.box.net/shared/xu8t6650u8
Haven't tried it with any of WM6 flavours.
Baggy
Excellent work. Just loaded Black 2.0 and didn't really want to load the new rom I just downloaded from iMate website. Time to install some cabs and have a play with the Foxtel channels.
Dev
You mean the one that was released weeks ago and discussed here?
http://forum.xda-developers.com/showthread.php?t=299597&highlight=telstra+rom
yeah it was discussed and released, but nobody extracted or posted the extended rom.
I asked for it, but nobody did it. This is great, got the files.... now....
i noticed a lot of new stuff.... lots of cabs that are not normally there. does anybody know what they do!!! i would like to get some of the new features, i know instinctively what a lot of them do, but i really dont have any clear guidelines or indication for the following as to whether they will add value, or clutter....
Default ...
3518_07
A_AIMEIDetector
MyPlace
Wavedev
MWizard
NITZ Disable
PP Version
PrefRat_2
RTSP
These are the two I want
videoplayer_No_Unistall
Telstra v5.2
Just wondering if I need any of the first few, at all to get the next two.
I know some gurus can extract and see in side what they do, i dont have these facilities, skills or knowledge, so if there are people who can, would you mind... i can post the cabs individually back if you wish.
simon_darley said:
videoplayer_No_Unistall
Telstra v5.2
Click to expand...
Click to collapse
I believe the player is to fix a streaming video problem that existed in that the default player did not work with the format that Foxtel is streamed using.
Not sure about the Telstra 5.2 bit. I'm not smart enought to deconstruct these things...
EDIT: Oh never mind... I just realised what the question was... It's too early in the morning to be reading and posting
Baggy
simon_darley said:
yeah it was discussed and released, but nobody extracted or posted the extended rom.
I asked for it, but nobody did it. This is great, got the files.... now....
i noticed a lot of new stuff.... lots of cabs that are not normally there. does anybody know what they do!!! i would like to get some of the new features, i know instinctively what a lot of them do, but i really dont have any clear guidelines or indication for the following as to whether they will add value, or clutter....
Default ...
3518_07
A_AIMEIDetector
MyPlace
Wavedev
MWizard
NITZ Disable
PP Version
PrefRat_2
RTSP
These are the two I want
videoplayer_No_Unistall
Telstra v5.2
Just wondering if I need any of the first few, at all to get the next two.
I know some gurus can extract and see in side what they do, i dont have these facilities, skills or knowledge, so if there are people who can, would you mind... i can post the cabs individually back if you wish.
Click to expand...
Click to collapse
the Videoplayer_no_Uninstall is for Foxtel
Telstra v5.2 is for setting up dataconnections and stuff... but this checks your IMEI before it starts...and if its not an IMATE it will not load...
Ok, i seem to have found a little bit...
NITZ is network identification and time zone disabling facility, so dont install...
MyPlace appears to be some sort of shopping or internet web facility link/app probably just to encourage us to buy more...
WaveDev is supposed to add base boost to the device for tcpmp and the like, so probably worth installing
RTSP is real time streaming protocol, so probably needed for the foxtel installation
PP Version might be to do with the java midlet, not sure yet.
MWizard cant find anything on at all yet.
3818_07 and AUS_HR and prefRat_2 still looking....
Installed MyPlace cab which has a few good web shortcuts. Also installed the Videoplayer_no_Uninstall is for Foxtel, but it comes up with an error when I start the app."PVPlayer cannot be opened. Not signed with a trusted certificate, or one of its componets cannot be found".
So I think it may need another one of the CAB's installed to get it working.
ANyone else had a play with this yet?
Cheers,
Dev
RTSP didn't help, still got the error.
I'll try another cab.
i have extracted and got all the cabs. i havent tried the foxtel, though that is the one that i want.
there is a subscription fee.
also an imei check is required, if you dont have imate, it wont install apparently. mine is imate jasjam, so hopefully it will work.
Okidoki
Getting a bit of research going, and testing.
FIRSTLY. IF YOU HAVE WM6 DO NOT INSTALL PV PLAYER OR RTSC.
You dont need it. Media Streaming works for Foxtel services. The reason PV Player is available is due to WM5 and the shortfall of the OS. WM6 uses media streaming and it works, so we dont need that.
The new telstra cab file is beneficial. It installs the correct settings for MMS and internet, sets the WAP facility and i also find i get better phone connection, might be an appearance, see later.
The proxy manager that is installed should be used with My Places, to force the system through the WAP and thus receive the concessional access charges of My Places. Also, My Places being WAP based, is very text limted, and download size limited compared to most, so the cost of access is much cheaper.
However, I suspect leaving the proxy on is going to interfere with push email, and general browsing. So its a matter of turning the proxy on before connecting to the internet (and WIFI is not available when proxy on), so that you can connect to the internet My Places and their rosey garden of chosen content.
However it is possible to access foxtel via the normal internet settings, but suspect if you do that you are going to get or incur premium data charges.
So in summary the ones i wanted i dont want, and the ones i didnt want or need, i installed. Not all though, if I couldnt see a reason for them, skipped them.
Still awaiting some feedback or input in what most of them were about, but if you are on telstra, then some of the items in that extended rom are worth while.
If somebody after this does want to know what i installed, and the effects (if known!), PM me. Its going to be a bit of trial and error over time, so better to PM rather than me keep posting back....
Also, might be beneficial for somebody to consider looking at some of the other files like the mms and other cab files, to see if they are newer, better, or more efficient than the standard device settings.
Personally, i aint gonna bother unless i find a need, i am sure anything in wm6 is going to be better than what imate are releasing.... (thanks to jasjamming and his premium wm 6 OS.... )
Thanks for the info simon. It is appreciated.
Is any of this required in WM6? Is it possible to just get the ExtRom by itself? I upgradded to the latest ROM from iMate/Telstra, but i want to upgrade to WM6 too...
just download ext rom review as reqd but install telstra cab and my places cab if u want foxtel. there are 3 others installed and didnt appear tause harm but cant see what they did or the benfits.
somebody needs to open the cabs and let us know wot they do.
i also installed the 3518 odd ball one, the one with AUS in it and pref-rat as its name imples prwference rates but dont really know wot these 3 did... but again caused no apparent harm.
Have installed those two cabs but cant get Foxtel to work.
I go to my place and click on the Foxtel icon, and I get the following error "Page cannot be displayed or downloaded because the connection was lost". I do have a data connection as my push mail & web browsing works perfectly. I'll have to try other cabs as when I click on Bigpond music icon on My Place, it comes up and says Non Telstra, so there is obviously something missing.
Any ideas anyone?
Dev
Do you have the telstra proxy turned on?
you should b able to access wap on my places without proxy. proxy reqd for most things though including foxtel.
can u browse the internet? is connection set to internet or work?
if that fails disconnect from internet and use the telstra proxy and view the rese coloured telstra garden...
No, I didnt have proxy enabled. Just turned it on and it doesnt make any difference as I still get the same error message. When I click on the Foxtel icon, it want to connect to Telstra.internet, not Telstra.Wap. Both my WAP & Internet connections are working perfectly.
I'm stumped!
Dev
Yea - I cant get fox or AFL vids to function either. Can browse to the wap sites, etc, and click on the TV stuff, it loads up the Windows Media player, says 'Failed to connect', then closes.
Im working with WM6 Black 2.0, with just the Telstra 5.2 cab and My places cab installed. Proxy was set to 'On' for my testing.
Would like to know if I need any other cabs from the Ext rom to get it to work.
i am having difficulties. still testing. but... in media streaming ... need to set the connections settings as to which to use may be secure wap or simply wap. not sure which yet.
i had the test working ok... cant get live to work yet. need to fiddle and ensure doesnt exceed downloads while testing...
I think I'm getting the hang of setting up my SDConfig.txt and provisioning XML file to get my phone close to its as-desired condition after a clean ROM flash. DCD's tip to me about how to compare a before/after registry was most helpful. My question now is on the two procedures I'm finding the most difficult (or at least the most difficult to have confidence in the result).
First, I use HTC Home v2.1 along with Home Customizer v1.0final but would like my phone to come up with each of these completely configured as my phone currently stands. That means the correct tabs activated, the correct contact photos in the contact tab, apps in the launcher tab, custom weather cities, custom icons and so forth. I'd like these same settings to be reflected in the HHC app as well so that the next time I launch it to perform future customizations, it's in synch with the way I UC-Configured my HTC Home. I have the registry settings in hand from a before/after compare. However, I'm not sure which folders/files I should capture and then copy over to the phone in my provisioning file. If anyone can point me toward this info, I'd appreciate it.
Second part of this question is similar but for my Opera Mini v4.1 installation (using the JBed midlet manager). Is it possible to pre-install this via UC Config by just copying over the contents of \windows\appdb (I'm going from memory here) and whatever registry keys show up in the before/after comparison? Or are there other files elsewhere to worry about?
I'm looking forward to the day when a firmware update or hard reset appears to disturb none of my apps or system settings beyond clearing the PDA data and thus requiring a simple ActiveSync (and perhaps a *228 dial-in to Verizon).