I finally have the original ROMs to the iMate,
OS: 1.03.00
R: 1.05.12
Ext: 1.03.00
I’m trying to downgrade from RUU-1.52.113.
So I ran the HimaUpdate (RUU1.03), and it erases and writes the OS, and erases and writes the Ext_Rom, and erases the Radio, and gets to 12% of writing the radio and fails? After this the device will not boot anymore. So I go into Bootloader and am able to run one of the later update (like 1.52.113) to get the device back up and running.
When I asked ClubiMate about it, they said this was a security feature to not let you downgrade the radio stack. But I know other people here are upgrading/downgrading all the time. Is there some other way I can force the Radio downgrade to 1.05.12? I've seen the other posts about xdanbftools? and the batch files that automate changing from TMobile to Daangarrd etc, but nothing specifically about this.
I dont know if flashing the radio on the xda2 is as dangerous as the xda1 but be careful, a broken radio stack has rendered many a phone banjaxed.
Related
after i have downgrade my mdaII it can't boot up anymore i also can't flash it again any idea?
mod25
If you go into the bootloader, (hold power, arrow up, and reset), you should see something like Serial 1.01. If you put it in your USB cradle you should see USB 1.01. At that point you 'should' be able to run the upgrade again.
I ran into the same problem trying to downgrade my iMate from Radio 1.10.0 to 1.05.12, I don't think they like/let you downgrade the Radio.
Hope it helps
you are my hero it is flashing again. Thank you very much for your very fast response.
mod25
mod25,
I want to downgrade for T-Mobile 1.60.36 to 1.60, but I'm concerned abouth your post in regards to the Radio Stack not liking downgrades.
Did you have to upgrade again after you got the device working again? In other words was your downgrade not sucessful?
Hy at all,
I have one MSPV M3100 and i upgrate this to WM6 Xda-Live 0.20.1 ROM. This rom woek perfectly but my telephone run very bad.
Y have this version:
ROM: WM6 Xda-Live 0.20.1
Radio ROM: 1.16.0.0
Bootloader: SPL 1.06
I want upgrade my Radio Rom to 1.27 version, but not it with himself. I have tried 4 times, and always the same error. ERROR 114= Upgrade error.
I have followed these instructions:
Upgrade instructions
1. Extract the contents of the compressed file you've just downloaded
2.Run MaUpgradeUt_noID.exe
Description for Radio 1.11 shows ver 0.70, but don't worry about it, it is really 1.11
3. The Hermes screen will turn white and show "Upgrade Radio Stack Please wait........."
4. If you get a "ERROR 120: COUNTRY ID ERROR", do not disconnect the device, run MaUpgradeUt_noID again.
5. The upgrading process will start and MaUpgradeUt_noID.exe will end up saying "ERROR 114: Upgrade Error", but the radio ROM will be flashed anyway, don't worry about that error!
6. Soft reset with stylus (Device will not be hard reset and no data will be lost)
that I have done badly?
as I have it to do?
Sorry for my english, is very bad.
Thanks a lot of for your answers.
By.
You need to prep the bootloader. I will go find the link.
Here is the wiki link. This should get you started. I am in the process of downgrading from 1.35 to 1.27 right now. lol
I have the Oliman 1.10 and ipl is 1.01. Search for hard spl and you will have it all.
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Before you flash the radio it is a good idea to use Hard-SPL so if the flash goes wrong the phone can be recovered.
pardon, but what is Hard SPL??
Is a program??
how I prepare the bootloader??
thanks
You Need to use SSPL. Look for Radio Files with SSPL in the WIKI.
Hello,
I must make downgrade to a ROM with the version SPL 1.04 to be able to
change to my radius ROM?
That is what me say?
Thanks.
@merodio How is it that you live in the USA, but have a CANADIAN cell provider (Fido), and also can't speak/write English (again, since you live in the USA)???
EDIT: Apparently the fido icon comes up when you select "Albania - Albanian Mobile Comms" as your provider.. Which is ALSO a non-sensical choice if you're in the USA....
You need to be superCID to run the RUU you're trying to use. Use one that uses SSPL.
LegolasTheElf said:
@merodio How is it that you live in the USA, but have a CANADIAN cell provider (Fido), and also can't speak/write English (again, since you live in the USA)???
EDIT: Apparently the fido icon comes up when you select "Albania - Albanian Mobile Comms" as your provider.. Which is ALSO a non-sensical choice if you're in the USA....
You need to be superCID to run the RUU you're trying to use. Use one that uses SSPL.
Click to expand...
Click to collapse
Hello,
Pardon. It does not form well my profile. I have two mobile. One Hp 6815 with Movistar and one SPV M3100 with Orange.
Pardons but I do not understand.
How I can obtain superCID?
I want to put the RADIO ROM 1.27.0.0 SSPL that this here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
What I must do first?
Downgrade to a ROM with SPL 1.04 or Change to SuperCID.
Thanks for reply.
By.
Hey Meodio_99, sorry but you are a classical case of someone who is going to end up with a bricked (dead) phone. You have a disadvantage as your English does not appear to be very good but you need to both read AND understand otherwise sooner or later you will end up with a bricked phone.
I suggest you read all the WIKI sections talking about upgrading and also http://forum.xda-developers.com/showthread.php?t=296722 and http://forum.xda-developers.com/showthread.php?t=286755
It might take you an hour or so but it might also prevent you from crying yourself to sleep at night because you killed your Hermes!
Hi all. I have a strange issue. As i understand my radio is brickd and not available in the system (imei and radio version also protocol version), but after inserting sim key code my hermes able to see the network with full bar and its goes off after sometimes (i cannot make a voice call) but sms send/rec is going. How to understand this? I checked with mtty there is no bad block or something. And sometimes my phone hangs deadly. I have 2.30 olipro bootloader and 1.51 radio. I tried almost all available os to install to get it work. The hanging is very casual, it can hang right after sys login or after few hours etc. Is there any medicine for that?
regards for all forumers.
And what is all about bad block? seems many pple have it. Is there anyway to fix it?. Please MEHELP
do task 2a to fix bad blocks, but if you've flashed an OS you shouldn't have that issue.
and what IPL do you have if you know how to access bootloader?
IPL 1.04 , already flashed sim/cid unlocker v3a.
We're all aware of people getting corrupt radios that can use SMS but nothing else, My hermes was like yours too back when it worked, Theres not much we can really do at the the moment.
Hi,
i must sent my hermes to repairs. so i have to restore it to wm5 and old bootloader.
i have some problems with the gsm module. sometimes i get "no gsm" in the bootscreen and after boot no phone functions. Some time i the radio shows up in boot and i get phone functions. the problem did not appear after a flash. the last flash a month ago.
it seems that the hardware that there is a loose connection. when i make a test call and knock the phone (softly) the phone connection is lost. the "end call" button does nothing and after a while the whole os freezes.
has someone another idea than faulty hardware?
OS is restored to original with the help of mrvranx guide.
whats left is the bootloader and the shipped radio rom.
Bootloader screen shows:
Herm 300
IPL-1.04
SPL-2.10Olipro
Radio Rom is 1.47.30.10
Im a little concerned about mrvranx warning: "If your radio version is currently HIGHER than 1.27.00.00 then it is very likely the radio bootloader is version 0108, this WILL NOT allow the radio to be downgraded to a radio containing BL 0106 and will result in a "NO GSM" error"
but on the next page is a guide to flash the bootloader back step by step to the original. is this method save? and does anybody know which one was the shipped one (t-mobile germany).
last the radio. i can't remember which was the shipped version.
and can i flash whithout problems back to the original? somewhere i read about problems because of the bootloader.
and the last question
in what order must i do this. first radio then the bootloader is right?
many thanks in advance.
washi
just today I had to get my old TYTN ready for warranty/repair.
I followed mrvranx's guide to downgrade my bootloader and it worked flawlessly. I did it all from an XP computer as I was having issue on my Vista machine. Follow it to a T and you should not encounter trouble.
As for the order, I don't think it matters. I did my radio last if you just wanna follow my lead.
As for determining the radio and boot loader version - I'm with Rogers in Canada, they send me my replacement device before I send them the faulty one. I just go into bootloader mode (power on the right side+ok on the left side+reset button at the bottom) and verify the version.
just checked my radio bootloader version. its 108.
so i wont be able to flash a radio < 1.3x?
which is unfortunate because the t-mobile germany never actually offered an official update :/
i just hope the handy will pass with the old os and old bootloader but newer radio.
Is this really needed?
I have to send my phone in as well and didn't know if it was really necessary to do all the downgrading and stuff? i guess can't hurt to be safe though huh
Hey Guys,
I am in the same boat as you all, I am with Rogers and unfortunately MRVANX guide is not online at present, can any one help. Also if you can tell me if it is at all possible, my IPL is 1.04, SPL is 2.10.OLIPRO and Radio version is 1.54.07.00 I am using FARIA.32 ROM
please help.
Thanks
Himanshu
Hi,
I have this wizard for couple of years.
It works fine but sometimes looses connection with GSM (became unavailable).
The bad joke is that I do not know about it (signal indicator shows good signal and others are ok).
At the moment I'm using the following firmware:
ipl 2.21.0001
spl 2.21.0001
gsm 02.07.10
os 2.21.4.1
WM5
I think the first possible solution is to upgrade radio.
Which version works most stable? Where is it? How to reprogram it without hard reset and reflashing all device (too hard to backup and reinstall all the software)?
Thanks.
Oleg.
Check out 'XDA-Wiki' you'll find all the Radio Roms listed there.
Its very simple to flash and upgrade Radio Rom,just hook up the phone with pc via usb cable and run the RUU in the Radio Rom,it'll hardly take a couple of minutes to flash.
zabardast_1 said:
Check out 'XDA-Wiki' you'll find all the Radio Roms listed there.
Its very simple to flash and upgrade Radio Rom,just hook up the phone with pc via usb cable and run the RUU in the Radio Rom,it'll hardly take a couple of minutes to flash.
Click to expand...
Click to collapse
I've found 2.71 with RUU_GO.exe
Is it the file to run? Is it suitable for 'operators' phone (G4)?
Can I be sure that nothing will happens with the current apps and data?
All Radio Roms are safe to flash to any device,G3 or G4,it just flashes and upgrades the GSM files and nothing else is changed or effected,it doesn't have any IPL/SPL (Bootloaders) in it.None of your personal data or application will get effected.
The most stable and commonly used Radio rom is considered to be is 2.19.11 and 2.69.11.But everyone have their own experiences,it all depends which suites you the best.
Hi,
thank you!
you were right about simplicity
last time (couple years ago) it was much more tricky to reprogram all rom
just flashed 2.69 radio and will check it's stability
i have 3.02... radio on a g4