I have a big problem. I need conect my XDA with GPS. My ROM is 4.01.16 US. But when I start my GPS program, I see mesage, that COM1 port is in use by another application. If I reset my XDA problem is same. Under PPC 2002 (ROM O2) it worked without problem. But I would like use this under WM 2003. Can you help me, please ???
Sajfi
PS. Sorry for my bad English, but I hope, that will you understand me ...
Turn off the IR port on setting .
Sebi said:
Turn off the IR port on setting .
Click to expand...
Click to collapse
Thank you very much !!! Now it work correctly !!!
Turn off the IR port on setting .
How you do this? There is only a under beams "receiev all incoming beams". Or where is an other place?
Uncheck the receive all incoming beams, that will release com1 for the other application.
Related
After upgrading to ROMKitchen 3.17, the infrared port has stopped working. It does not send or receive anything. Why could it happen? It was working very well before upgrading. If any application that involves IR, that is beam file, ActiveSync by IR causes the XDA to hang. IR Receive gives message "Unable to establish an infrared connection while mobile device is connected to the desktop"
"Unable to establish an infrared connection while mobile device is connected to the desktop"
Click to expand...
Click to collapse
Dear,
I had a similar problem once and for long until I realized that some of my other softwares were interfering with the IR Port. If you have any software that requires all-time active connectivity status of any kind (i.e. keyboard driver), disable it before using the infrared.
HTH
Dear Ken,
I guess that is where I went wrong! There was a foldable keyboard software that was creating problem!
Thanks
I have similar problem with AT&T PPC2002 (XDA developers Special Edition ROM v1.2). The phone was bought with this ROM, so I didn’t try with other versions.
When I run ‘infrared receive’ application or try to beam any file my phone simply hung till I soft-reset it. It may be the conflict with other programs but I not sure. How to check who else uses IRDA and how to remove those programs/conflicts?
Help please and thanks in advance
Please tell me how did you end the problem because it seems that i have the same thing with my XDA II
I wish I could end up with this problem... but I still not. It does not vitally critical since I don’t need IRDA functionality so far. But having feature (IRDA) and knowing it does not work for unknown reason driving me mad. PROBLEM STILL EXISTS AND I HAVE NO CLUE WHAT TO DO.
I recently upgraded my XDA from the O2 website. Everything OK except I have lost COM 1 ? If I try to select it in the GPS of my Tom Tom Navigator it tells me it doesn't exist.
I have the Tascali registry editor but I can't see anything missing (Like I'd know !).
Please help because Tom Tom is absolutely useless without GPS !
START/Settings, Connections TAB, BEAM icon, Untick beam. OK.
You should have com1 back again.
Have you disabled the infrared recieving in Connections?
Normaly that´s the problem
HTH
Stefan
Feel a little stupid now !
Thanks... works fine now !
hi there
i have problem with my tomtom GPS software, Problem is
When i start tomtom navigation software the comes up
"Can't open COM1:, Port does not exist"
I tried to configure my Tomotm wired GPS receiver with tomtom GPS software, but no luck. i tried to select COM9, COM2 as well, still no luck
When i tring to select "Serial cable on COM1" , then this message comes up "Can't open COM1:, port does not exist"
can anybody help please
Regards
Gugi
I remember something about disabling IR beams, but i thought this was solved in Himalaya.
Anyway try this :
Start/settings/Connections/ Beam/ uncheck "Receive all incoming Beams."
M4io said:
I remember something about disabling IR beams, but i thought this was solved in Himalaya.
Anyway try this :
Start/settings/Connections/ Beam/ uncheck "Receive all incoming Beams."
Click to expand...
Click to collapse
Thank you very much M4io
this thing worked
Regards
Gugi
Hi there,
Everytime when i use the PDAViet 40005a Cross or Fantastic Mobiz v2.0b4 roms my s200 can't receive files through bluetooth.
But i can send files through bluetooth without any problem.
Is there a solution for this problem?
yes there is sollution,start/settings/connections/beam/recieve incoming beams
beams??? is this a IR only setting or work it on blue tooth too??
zeroed said:
yes there is sollution,start/settings/connections/beam/recieve incoming beams
Click to expand...
Click to collapse
Receive Incoming beams is for Infra red ! I have the same problem with bluetooth.
not only for infrared,it is for bluetooth too,when it is switched on phone automatically recieves via bt,why don't you people first try,then write????
zeroed said:
yes there is sollution,start/settings/connections/beam/recieve incoming beams
Click to expand...
Click to collapse
lol smartass.. incoming is also activated...
the other bluetooth devices that want to transfer te files can see the s200 as available through bluetooth.
zeroed is correct thou that setting is needed for BT not just IR
NetrunnerAT said:
beams??? is this a IR only setting or work it on blue tooth too??
Click to expand...
Click to collapse
bluetooth too when you beam files via bt phone first recieves it,then asks you if you whant to save them or not,and all without need to pair first and then to send,try for yourself when beam is turned on,phone recieves everything from everywhere.
u need a HTC BT FTP!!
i once have the same problem with BT, especially on receiving a file via BT (sending a file is not a problem). Then i read threads in this forum (sorry i forgot so i can't give u the link) and i found a solution for my problem (and of course your problem too).
u need a program to install called "HTC_BT_FTP.cab". it's some kind like add-on on your BT settings, with this program installed like zeroed says, it's turn on the beam and BT icons, then we can receive a file via BT
zeroed said:
bluetooth too when you beam files via bt phone first recieves it,then asks you if you whant to save them or not,and all without need to pair first and then to send,try for yourself when beam is turned on,phone recieves everything from everywhere.
Click to expand...
Click to collapse
That has newer been the case for me.. Either if its ticket or not, i can get files from everywhere without beeing paired.
Try HTC BT FTP
it's working just try it
sorry, thread flush only~~
hello everyone
i need help to connect my infrared keyboard to my o2 xda atom exec
after the installation of o2 xm-02 keyboard i went to it i ticked active keyboard and error message cam up " can't open infrared port. please close the application infrared port using or reset your device "
can anyone help me to resolve this issue and thanks in advance
Hicham
easy
in phone settings uncheck the receive incoming beams and it will work
drjumanji said:
in phone settings uncheck the receive incoming beams and it will work
Click to expand...
Click to collapse
if that is infrared tools , it should be check NOT UNCHECKED or else u cannot use any device for infrared.
thank you
drjumanji thank you very much