it is fully charged (led is green when it is in cradle) but when I press power buton nothing happens. What is the problem? Please help. I am new to it, so hope for help of good friends here.
try doing a softreset
Rudegar said:
try doing a softreset
Click to expand...
Click to collapse
you mean pishing once? and then? try to press power on button?
you mean pishing once
Click to expand...
Click to collapse
if you by this mean that you press the tip of your stylus into the hole in the left part of button of the xda once then yes
then try to turn it on using the turn on / off button
I tried, but it did not turn on, when I put it to cradle led is green, but when I get it out of cradle I do not see any light on led. I tried to power it on pushing that button, but nothing happens
is anybody able to help me?
If it neither works in the cradle or on battery power then I would suspect a component on the charging circuit has died or your battery is kaput, by doing a reset it should switch on automatically.
but holding power button and doing soft reset I could get to wallaby bootloader, so battery does work. any other suggestions?
If holding power and rest works then the power button is functional, have you attempted to flash the xda before this happened? What happens if you push the green telephone button bottom left of your xda? Have you tried a hard reset, using the unscrewed top half of stylus to push once in the tiny hole bottom right of xda, leave for 1 minute then push once more. You will lose all data but your data isnt much good if you cant switch on.
yes, I tried to hard reset it several times, but had no result. now I am trying to wait for several minutes during hard reset. when I press green button - nothing happens. I did not try to flash my XDA before those problems appeared. no it did not turn on even after 5 minutes... :-( please help!!!!
I had installed KSE TrueFax 2 and this power issue happened to me. Could not switch it on at the XDA at all, and had to so a soft-reset to get it to switch on. After I uninstalled the fax sowftware, everything worked okay again.
so you can power phone on pressing button and dping soft reset. yes? what do you see? wallaby bootloader? what to do next to run operational system? I just see 4 color stripes and below GSM OK, that is all, what should I press?
dmjass, it seems to me that you have lost or corrupted your rom, if you havent been flashing the xda its beyond me why this should happen. I would download a new rom, not radio stack, just the rom and use the sd card method of flashing, this should restore your system if the hardware is all ok, you have a working bootloader and an intact gsm stack so give it a try as you have nothing to lose by doing this.
I think trying to do the SD-card ROM update is your best bet as well.
If it turns out that you cannot get your unit running again, I would be interested in purchasing it for testing purposes and replacement parts.
Good luck!
-Robert
thank you friends for your advices, but please let me know how to perform flashing rom by sd card. I will appreciate all your help, please describe that process in details. ok? thank you.
PDA bad ROM?
I am experiencing the same problem after having dropped it off my belt clip. Now the unit just says "Welcome to T---Mobile, G324e4 // R6.25.02 // 4.01.16 and none of the buttons work except for the boot stylus ones. Can anyone help?
Related
I sold an old XDA to a friend, which was in perfect condition. However, a few days later he sent me this email. Do you guys have any tips for diagnosis when I take it back?
I left it off all night last night (waited a whole night before pressing the hard reset button a second time). But when i inseted the SIM card today it was still telling me that "the phone is off. Turn it on and try again." I keep pressing the green phone button and it either doesn't react, or tells me 'operation failed' or it just hangs. It also hangs if i want to get into the phone settings.
All this happened after I changed some connection settings and i said 'yes'
when it asked me if i wanted to soft reset to update the settings. sigh.
Click to expand...
Click to collapse
Is it possible he changed the band setting to 900/1900 in the phone settings? I can't think of anything else off the top of my head.
Please help him (and me) get this XDA back into working order! Thanks
G32S54
R4.21.00
04.01.00
He could try entering bootloader, reset and power switch at same time, then push the button below the antenna, choose his gsm freqency from there. He could also try clicking the signal icon at top right of screen and switch it on from there. Also are you sure he is doing a hard reset, this is carried out by inserting the top half of unscrewed stylus in the hole below the headphone socket, push once, wait a minute, push once more.
why not try to do a hard-reset!
Hi
Unfortunately I was in the middle of upgrading the software to version 172181 when I decided, for some strange reason, to pick the phone up out of the cradle and make a call. DOH!
I can no longer get the phone to boot up / turn on it is just stuck on the low light o2 backscreen and shows
r 1.17.00
g 1337.20
d 1.72.00wwe
Im quite literally just stuck on that screen, the phone wont seem to reset, reboot or hard reset or turn on or off.
I assume im doing the hard reset correctly on/off button and reset button with stylus.
I did see somewhere to use the on/off button, camera button, record button and reset button with stylus but this does not appear to work either.
I don't know whether the condition is terminal or not but anyone can help i would really appreciate it I have a lot of information on there that is very valuable to me.
hi
had same problem D/pad on/off button and reset release reset first and it should put it back in bootloader mode then do upgrade again, it did work for me
thanks newquaymarc
ive done that now ive got a low light page that says
"serial" at the top
"v1.03" at the bottom
any idea what i should do next?
Oooh upgrade seems to be installing \o/
Thanks
would you happen to know if there is any way I can manage my contacts from the pc? i searched activesync and there appears to be nothing there. My old motorola bought up kind of a virtual phone on the pc and managing and adding contacts was easy.
sisfis said:
would you happen to know if there is any way I can manage my contacts from the pc? i searched activesync and there appears to be nothing there. My old motorola bought up kind of a virtual phone on the pc and managing and adding contacts was easy.
Click to expand...
Click to collapse
Are you serious? Outlook/Contacts! Nothing easier.
hi again
ative sync should kick express in and that will manage contacts/calender
would using thunderbird as the default email client **** this up then?
sisfis said:
Hi
Unfortunately I was in the middle of upgrading the software to version 172181 when I decided, for some strange reason, to pick the phone up out of the cradle and make a call. DOH!
I can no longer get the phone to boot up / turn on it is just stuck on the low light o2 backscreen and shows
r 1.17.00
g 1337.20
d 1.72.00wwe
Im quite literally just stuck on that screen, the phone wont seem to reset, reboot or hard reset or turn on or off.
I assume im doing the hard reset correctly on/off button and reset button with stylus.
I did see somewhere to use the on/off button, camera button, record button and reset button with stylus but this does not appear to work either.
I don't know whether the condition is terminal or not but anyone can help i would really appreciate it I have a lot of information on there that is very valuable to me.
Click to expand...
Click to collapse
i was attempting to upgrade this xda that i just bought to this same version. is this the newest one? what version of windows is it? i got an error in the middle of the upgrade now it just shows the connection type at the top of the screen and V1.01 on it. tried the UpgradeUt_noID file but it says that it cant connect after about 3 minutes
sisfis said:
Hi
Unfortunately I was in the middle of upgrading the software to version 172181 when I decided, for some strange reason, to pick the phone up out of the cradle and make a call. DOH!
I can no longer get the phone to boot up / turn on it is just stuck on the low light o2 backscreen and shows
r 1.17.00
g 1337.20
d 1.72.00wwe
Im quite literally just stuck on that screen, the phone wont seem to reset, reboot or hard reset or turn on or off.
I assume im doing the hard reset correctly on/off button and reset button with stylus.
I did see somewhere to use the on/off button, camera button, record button and reset button with stylus but this does not appear to work either.
I don't know whether the condition is terminal or not but anyone can help i would really appreciate it I have a lot of information on there that is very valuable to me.
Click to expand...
Click to collapse
It's bcoz the flashing/upgrading/installing of ur fone seems not to be finished. Always follow instruction. If you really want to do something, think twice so you never messed up. nweiz, try to load it again in bootup mode and re-flash it. there are a lot of ROM for the Himalaya, you can download one. Try to search. again, FOLLOW INSTRUCTIONS!
Hi all
I have a Lobster 700tv phone which I think is brilliant, but I'm looking to upgrade the software from mobile 5 to mobile 6. I have windows xp on my pc is this possible?
The reason I'm asking is that my phone is somehow stuck in headset mode (even without the headset plugged in) and I can't figure out on how to get it back to normal. Even when the phone rings, I get the ring tone, but have to plug in the headset to answer the call. (I've done a cold reboot and it's done no good). I took it to a phone repair shop yesterday and they've said that it's a software error.
Has anyone else had the same sort of problems?
Or if anyone can advise on a possible solution (apart from throwing it out of the window!) I'd be grateful.
Thanks
If its a software issue a hard reset should bring you back im not sure what a cold reboot is so you may have tried this, also never heard of your phone so i wouldnt know ho to hard reset. If hard reset doesnt work then you will probably have to flash a new rom, possibly to wm6 if you can find the rom.My advice is lots of searching and reading... good luck
wm6 won't come soon to my and your lobby's screen
it requires a LOT of time to be done, special tools, extracted ROM for the operation and so on, (btw the phone isn't very commercial, wide-spread and so on, which is demotivating programmers)
ANYWAY, now on the topic:
you can try the CLEAR STORAGE option
found in accessories, it does almost fully hard-reset the phone, but preserves DAB app (I read somewhere, that hard resetting did remove the app, but I'm not sure now...)
anyway, here's how to do the hard reset:
1. Press and hold soft1 and soft2 keys (i.e. menu keys).
2. Press and hold power button for around 1 to 1.5 seconds. Release power button. Keep holding both soft keys.
3. After a while, black screen should show instructions asking user to press '0' key to reset to factory default.
4. Press '0' within the timeout period (which is very brief).
If instructions don't appear on the screen, repeat steps 1 to 4.
it'll show the boot screen, and afterwards a black background with the typings, quickly press 0 to reset, sit and wait
as usual, backup all contacts, data, apps, stuff like that, and then do the job
p.p. Hard reset info via http://wiki.modaco.com/index.php/HTC_Monet
p.p.2 Greetings from Bulgaria, and sorry for my dumba$$ English :]
Hi there Prodigyfied,
Greetings from cloudy and overcast England.
Thanks again for the info.
I've tried what you've suggested, and it's still the same. Do you or anyone else have any other ideas?
Thanks
Paula
Sorry I didn't see this thread sooner!
it is a common fault with HTC phones and is a hardware issue - here is one of the MANY threads on modaco
http://www.modaco.com/content/HTC-T...aCo-com/229405/C500-Stuck-on-Headset-profile/
Should have enough suggestions to get you working!
Good luck.
Thank you
Thanks Confusious,
The suggestion in that other thread has done the trick.
You've made my day
Thank you.
Paula
It just randomly shut off earlier this afternoon. Everytime I try to turn it on with the power button, nothing happens. When I try to boot into TWRP/download mode, it just vibrates and flashes the samsung logo and then goes black. I can't seem to find any information as to what else to try. I don't have a jig and the earliest one would be shipped on amazon is Thursday. Any ideas?
wow, so i had been reading threads for the last hour and finally stumbled upon some guy with the same issue and he figured out it was that his power button was stuck. i just pushed in my power button really hard for about 5 seconds and jiggled it and it finally worked. my phone just turned on as normal after doing that. great, sounds like ANOTHER samsung issue with the power button. this will be my 3rd different samsung device that i've had issues with the power button - a captivate, infuse, and now the note. i send about 20,000 texts a month, so i'm constantly pressing the power button to turn the screen on and off. i will need to look for an app that allows me to use the volume button as the power button hopefully in case this happens again.
I had a samsung tablet that had the bad power button getting stuck too.
jaxjonesdrew32 said:
wow, so i had been reading threads for the last hour and finally stumbled upon some guy with the same issue and he figured out it was that his power button was stuck. i just pushed in my power button really hard for about 5 seconds and jiggled it and it finally worked. my phone just turned on as normal after doing that. great, sounds like ANOTHER samsung issue with the power button. this will be my 3rd different samsung device that i've had issues with the power button - a captivate, infuse, and now the note. i send about 20,000 texts a month, so i'm constantly pressing the power button to turn the screen on and off. i will need to look for an app that allows me to use the volume button as the power button hopefully in case this happens again.
Click to expand...
Click to collapse
Use Flappjaxxx UCLF6 rom....build #5....
It's ICS 4.0.4 with a "bunch " of extras .....volume wake included .....g http://forum.xda-developers.com/showthread.php?t=1664980
Theres and app that allows you to swipe your hand across the screen to turn on/off.... Its in the app section.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Be careful using apps that wake your device using homescreen touch or movement .
It generally means that your phone never goes into deep sleep...
And the battery life will be greatly reduced ....as the device technically never turns off ....g
Help please!!!!
I have NO SIM ERROR after flashing (MOD)(ROM) BLACK STAR ROM for t-mobile by BIGFAU... followed instructions to a T.. wiped data factory reset.. cache.. dalvik.. formated data... formated cache.. formatted system... then rom loaded fine.. however got a no sim error.. reflashed same way.. same thing.. now no matter what i do.. even odin back to complete stock and reflashing stock modem.. no sim detected .. please pls help
Jblakeley said:
I have NO SIM ERROR after flashing (MOD)(ROM) BLACK STAR ROM for t-mobile by BIGFAU... followed instructions to a T.. wiped data factory reset.. cache.. dalvik.. formated data... formated cache.. formatted system... then rom loaded fine.. however got a no sim error.. reflashed same way.. same thing.. now no matter what i do.. even odin back to complete stock and reflashing stock modem.. no sim detected .. please pls help
Click to expand...
Click to collapse
See your original thread ...
I've posted some suggestions there for you ...
Please don't post your questions in other threads ....especially the same question ....it's inappropriate ...g
hi, brought the used gear fit from gumtree, was using it for few hours, later when exploring i somehow got into pin lock screen and got struck, can someone help me to reset, done the reset by pressing and holding power button for 7 seconds still its asking me the pin, feeling like i'm lost :crying:
some on please help me , thx in advance
vijay.alapati said:
hi, brought the used gear fit from gumtree, was using it for few hours, later when exploring i somehow got into pin lock screen and got struck, can someone help me to reset, done the reset by pressing and holding power button for 7 seconds still its asking me the pin, feeling like i'm lost :crying:
some on please help me , thx in advance
Click to expand...
Click to collapse
Hold power for 20 seconds. It will factory reset it.
aooga said:
Hold power for 20 seconds. It will factory reset it.
Click to expand...
Click to collapse
Hi i also have this problem after letting someone borrow it they put a pin on it that they cant remember... holding the power button for 20 seconds deffinately DOES NOT work though. Ive even tried flashing new firmware via odin and had no luck. waiting on samsung to get back to me, but from previous responces i dont beleive that they will be any help :-/ any help here would be greatly appreciated
XSIVSPD said:
Hi i also have this problem after letting someone borrow it they put a pin on it that they cant remember... holding the power button for 20 seconds deffinately DOES NOT work though. Ive even tried flashing new firmware via odin and had no luck. waiting on samsung to get back to me, but from previous responces i dont beleive that they will be any help :-/ any help here would be greatly appreciated
Click to expand...
Click to collapse
They changed the combo to reset it in the newer versions. I don't know what it is though.
Sent from my SM-G900T using Tapatalk
Can you try connecting it to a different device? This will reset it if you can do it.
i had the same problem, also messed with odin to try to get rid of the pincode .
i installed oldest software in my language and did the 20 sec reset.
it worked for me, now updating to last version
vijay.alapati said:
hi, brought the used gear fit from gumtree, was using it for few hours, later when exploring i somehow got into pin lock screen and got struck, can someone help me to reset, done the reset by pressing and holding power button for 7 seconds still its asking me the pin, feeling like i'm lost :crying:
some on please help me , thx in advance
Click to expand...
Click to collapse
I figured it out no thanks too Samsung after you put the gear in the rebooting screen hold the power button after highlighting download until it restarts, it should say welcome. Not the do not turn off target screen, just let it restart
Alexc129 said:
I figured it out no thanks too Samsung after you put the gear in the rebooting screen hold the power button after highlighting download until it restarts, it should say welcome. Not the do not turn off target screen, just let it restart
Click to expand...
Click to collapse
Hi Alex,
can you explain more specifically what did you do to reset PIN code? I am trying many possibilities with no luck. With ODIN I downloaded the oldest firmware, but 20sec reset mentioned above also didn't work.
Thanks
EDIT: Resolved by flashing like in this article: http://www.addictootech.com/manually-upgrade-samsung-gear-fit-via-pc-odin/
You need BL and CSC files also to reset settings.
i can not get into my samsung gear fit
I played and locked it. I reached here searching for answers how to unlock it. And got successful.
What I did was HOLD the power button. After a few seconds, Display shows Power Off menu. DO NOT release the power button and hold until it restarts. When it booted back the PIN was no there and lucky enough that no data was lost on the watch.
The Software version on my watch is R360XXU1ERC7.
Hope that helps!