Related
i donwloaded something and putted it on my xda II, now it says serial and at the bottom vl.01 i can't use it it's tottaly black no hard reset works, HELP!
euh i really need uyrgent help i can't connect to theactive sync either, i just downloaded the new windows to my device clicked on something and then it went off and only black letters serial and v1.0. it's not my xda so HELP HELP HELP
don't panic...
you are in bootloader mode.
you've probably executed 'enterbl.exe', which is a part of every upgrade.
just connect your device with your pc and run normal upgrade/flash procedure.
buzz
but i can't use active sync anymyore, i unzipped the thing i downloaded and now it got 7 options to choose from but when i click it it opens a install program and in big red letters ROM IMAGE FILE NOT FOUND
it also says
the pocket pc software update cannot locate the ROM image file to update to your pocket pc. Download the correct rom update for your pocket pc and try again and i am a real noob in these thing
did you try a hard reset?
press the on/off button and the softreset button at the same time.
if that wont work
http://forum.xda-developers.com/viewtopic.php?t=18287
try putting that rom on your phone and dont forget to change the country id as described.
good luck friend!
how can i change my country when i have a blanc screen on my pda? and what of the four should i download, i don't speak english so it's double hard to understand
bram said:
how can i change my country when i have a blanc screen on my pda? and what of the four should i download, i don't speak english so it's double hard to understand
Click to expand...
Click to collapse
if you understand my english thats ok.
i completly understand german but im not so good in speaking it.
normaly we can only speak english here but we can make an exeption so you can speak german to me and i will speak english back. OK? or try the translator (www.freetranslation.com)
did you perform the hardreset?
activesync won't work aslong as serial is replaced by the word usb when in the cradle it's ok carry on with the upgrade
try another pc to upgrade!
thats happen to me too.. but...
i also try to install the downloaded items from this website (which is the new windows version 2003 SE), and soon after i start installing it, my desktop computer says "error has occure during the installation process".
:shock: i was very shocked when i see my device completely blank with a word says "USB (on the top)" and "Ver. 1.03 (on the bottom)".. i really panic beacuse my active sync doesn't worked.. but then i start to hard reset my xda then reconnect my device and try to install it several times (bercause sometimes the error message still appear..) after waiting for 5 step of installation which takes abaout 2 hours
tadaaaaaaa now i have an XDA IIs application on my phone...
So in conclusion:
1. do't be panic :wink:
2. try to hard reset ur device
3. reconnect ur device (even if the activesync won't recognized ur device)
4. Install the downloaded files..
5. wait until ur computer says "deleting extended rom" (or something like that)
6. be patient..
7. Pray to GOD..
8. and here you go you got new look for ur beloved xda.
good luck..
oh it works!!!!
there are no words for it and the landscape and the themes, it's BEAUTIFULL!! thanks alot everyone!!!!!!
Similar but not same
Hi I have a similar problem.
While updating my Himalaya device to the XDA2jojo v3.2z5 (not the first time I have installed this version) it has gone completely blackscreen.
I have tried to soft, hard reboot the device. I have also tried to initiate a reinstall with connection error failure. I have tested the batttery and it is okay. No matter what I do I cannot get the device to come back to life.
If I plug the device into the cradle or attach power I get a red light where there is normally the green flashing or orange power light.
Anyone any ideas what this could be.
I have had a similar issue where I would get a blackscreen this problem has occured a few times but I have always managed to get the device back with hard reset.
Similar but not same
Hi I have a similar problem.
While updating my Himalaya device to the XDA2jojo v3.2z5 (not the first time I have installed this version) it has gone completely blackscreen.
I have tried to soft, hard reboot the device. I have also tried to initiate a reinstall with connection error failure. I have tested the batttery and it is okay. No matter what I do I cannot get the device to come back to life.
If I plug the device into the cradle or attach power I get a red light where there is normally the green flashing or orange power light.
Anyone any ideas what this could be.
I have had a similar issue where I would get a blackscreen this problem has occured a few times but I have always managed to get the device back with hard reset.
pleeeeeaaase read/search the forum i know its fustrating when your phone apears to be dead but there are about 100000 topics about this problem and about 100000 times the solution!
greetings OMEGA_ReD
After I tried to downgrade my Qtec2020 from WM2005 tot WM2003SE the updated stoped in stage 1.
This is what I found in the RUULog.log file:
19:15:11 Connection with Serial
19:16:31 Begin stage 1
19:17:01 CE Erase retry 1
19:17:31 CE Erase retry 2
19:18:01 CE Erase retry 3
Now I am stucked in bootloader mode and tried softreset, hardreset, special WM2005 hardreset but nothing seems to work. I have only a grey screen with Serial v1.02 on it.
Is there anybody who could help me
I've never performed any downgrades from WM5.0 but I have an idea that could work?
Install WM5.0 again, then perform a Hardreset but this time perform the Registry and Storage format (press power+record+camera+reset pin for about 5 seconds and you should see a menu on the screen, by using the record button to select an option and camera button to change to YES. It should be NO, YES, YES and press ACTION button to save changes). Then unhide the Extended ROM and erase anything in there.
Then perform the downgrade to WM2003SE.
I hope this works for you...
Regards,
Rayan
Thanks for the information but it's not the solution.
I tried to install WM5 again but I get an error 112 during the install.
The RUULog.log file:
20:42:03 Connection with Serial
20:43:26 Begin stage 1
20:43:56 CE Erase retry 1
20:44:26 CE Erase retry 2
20:44:56 CE Erase retry 3
The device is still stuck in bootloader mode. All the reset actions won't work (soft, hard, special)
Have you tried the upgrade/downgrade method using an SD card instead of the cradle/pc?
No I only tried it by USB/PC. I will search the forum for how to do this and give it a try. I will let you know later if this is the solution. Thanks for the information so far.
Regards Marco
I search the forum but can't find any way to do this. Can someone tell me how to flash by SD card
It's in the Wiki, not the forums...
Here you go:
http://wiki.xda-developers.com/index.php?pagename=XDAtools
Good Luck!
Hi, I was just upgading my XDA 2 os when my laptop froze in the middle of the upgrade! Now it only has the o2 startup screeen it won' turn off or connect to my computer to complete the upgrade. What can I do?
Is my Xda gone for good??
skud try aggain
you can put it back in bootloader mode and try aggain
this time on a destop you know power problem in laptop
you will not want a power failure in the middle of an upgrade
hope thats helped
Stuck on Bootloader
I experienced the same thing too.
Just detached battery from your device for about 10 minutes (I pressumed, may need more time)... then do the downgrade again.
in your PC task manager ''end process'' the ff:
''wcescomm.exe''
''WCESMgr.exe''
''rapimgr.exe''
now connect again the device and start the reflash...it works for me.
hope this wl help you...
No joy I'm afraid. How can I get it back in bootloader mode when I can't get past the O2 startup screen. Putting in an sd card Doesn't do anything either it is completely dead except for the annoiying but colorful O2 Logo.
Ok, it just turned itself off so I am after turning it back on andnow all I have is a white screen! What is going on? The laptop crashed when it was at 65% in the upgrade proces.
I'll give this taskmanager thing a go and get back to ya.
Thanks for all the help btw!
I have placed a ROM.nb1 on my SD card, but I get a eror with the XDA OS Image Tool. It looks that I can't find any way to get out of the bootloader mode whatever reset I tried. The battery was out for almost 12 hours but this also makes no difference. Is there a other way to flash by SD card or is there a way to reset/upgrade the bootloader mode. I think the bootloader mode hangs or is corrupt.
Regards Marco
I've tried that now and it still won't connect and still the same white screen! Any othere suggestions? Is there anything I can download which would force a connection or install something onto my XDA or does anyone know how I can get past this blank screen and maybe get to the settings window?
This must have happened other people anyone managed to fix this?
:!: :!:
hey power kite! It seems we got similar problems but your a bit ahead in getting it fixed. Can you tell me where you got the Rom.nb1 file so I can give this XDA tool thing a go?
What kinda power kite you got BTW?
Here is the link where I get the NB1 file
http://forum.xda-developers.com/viewtopic.php?t=8606&highlight=sd+rom
Good luck
Cheers Power kite,
I was just doing a bit of seaching on the sd flash method and found a website that takes you throught it step by step if your interested
http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=93&PN=1
Hurray I'm back in business!!! Talk about relief! :lol: Its upgrading as we speak!
Now just to watch it like a hawk and not let this crappy laptop crash again!
Thanks everyone!
Give that link a look Power kite.
Skud
99% !!!!!!!
Great that it worked for you.
I did procedure 1, 2 and 3 but I'm still stuck in bootloader mode. Every upgrade WM2005, WM2003SE wich I have flashed before give me an error 112. I have flashed my SD card but I don't get any instructions on my screen.
Is it possible to install the bootloader again or upgrade it. I think my problem is the bootloader.
got stuck on o2 splash screen. don't know what happend and what to do.
got any tips?????
thanks
Do a hard reset -> press the power button and the reset button at the same time
i've done it already and still hangs...
Reflash the rom with one from your original operator. If you're using an o2 xda please download a rom from www.my-xda.com and follow the on screen instructions.
well my friend i think somehow ur OS is lost and all u still have is the extended rom OS image,that's why u still see the splash screen...
i assume that ur device is a himalaya(though u did'nt mention any informations :wink: ),but if really is,then do the following:
1-log in to this forum as user:xda pass:xda
2-go to ftp server from the wiki page(up left ur screen)
3-go to himalaya folder and download any rom u would like 2 have(it can appear in several way,exe file or several files zipped in a .zip)
4-if it's and exe file and u have winrar,then extract the content in a folder,u will find 6 files(maybe less,rarely 1 file more-xda2nbftool.exe-),now forget about this file for the moment
u will need 2 file to fix ur phone:nk.nbf & HimauUpgradeUt.exe(i idvice u to dowload an O2 rom upgrade to prevent country id error wich can be fixed if necessary )
now that u have the tools,do the following:
1-press power button+navigation pad(the round one between the green and the red buttons)+reset button SIMULTANESLY,u will enter bootloader mode(blank screen with serial on the upper side of the screen,number like 1.06 on the buttom)
2-put the cradle in usb port DIRECTLY IN UR COMPUTER NOT THROUGH USB HUB
3-put ur phone in the cradle while it's in bootloader mode,u will see that the serial word in the upper screen have changed into USB
4-run HimaUpgradeUt.exe and follow the on screen instructions,u will see a status bar,wait untill it finishes,hard reset ur phone,and here we go
i forgot to mension that u should put those 2 files(HimaUpgradeUt.exe & nk.nbf),in a separate folder,close any open task on ur desktop/laptop,and PUT UR CHARGER IN THE CRADLE for the battery don't run out...
hope i helped
tell me what happened with u dude,and remember that ur in the best PDAs developping site in the world,so don't worry,hopefully,everything can be fixed....
RAGO :lol:
sorry, forgot to mention, yes its himalaya.
ok, i will try all your advices
thanks a lot
rago,
thanks for the tips, it worked.
ur always welcome bro
good to know that u have ur device back
RAGo, I did the same, and it said MODEL ID ERROR. How to fix that? Mine is now WM2005.
hi prd00...
replace the HimaUpgradeUt.exe in ur upgrade folder with the attached file,u will bypass country ID error...
good luck
RAGO :lol:
Hi all,
I think I need help from you guys. I have my xdaII dead with screen showing bootloader(it turns to USB when i plug into usb port). after I followed the instructions above...it shows model ID error. Please help....
problem solved
sorry guys...i forgot to use the given attachment file...thanks a lot.
Special thanks to RAGOv. your tips is worked.
splash
good day.
i have similar problem. it occured after installing items from an extended rom (specifically ARABIZER). i tried installing other items in the same extrom, and it just worked fine.
what can be the solution? i was hoping i can install teh ARABIZER.
thank you.
splash
good day.
i have similar problem. i am using i-mate ph10b (himalaya). it occured after installing items from an extended rom (specifically ARABIZER). i tried installing other items in the same extrom, and it just worked fine.
what can be the solution? i was hoping i can install the ARABIZER.
thank you.
dead XDAIIS (in bootloader mode) please help..
Dear Guys,
My XDAIIs is in bootloader mode (it shows serial--> at top and V 2.07--> at bottom, and doesnt turn to usb when i plug into my usb port). Does anyone know how to fix it? Please help....
hi ordinary...
haven't u said it worked!!!so what happened next???!!
plz explain more,for the mean while try changing the USB port ur using,check ur cable,and try to change the computer(desktop/laptop)...
if it doesn't work plz explain more what happened,so we can help u find the solution...
@arcquisumbing:u are not clear in ur post my friend...what same problem(are u in bootloader mode???!!),how did it happened after installing item from the extended rom????and u want a solution for what???!!!
sorry i couldn't help u my friend but plz try to explain more so we can undestand ur problem...
RAGO :lol:
stuck in splashscreen
i'm sorry.
i was referring to the stuck in splash screen.
after the hard reset, autorun was initiating installations for the contents of the extrom. i installed each and every item and at the end of it, it required resetting. i just clicked on yes to reset, then when it did, it just stops at the splash screen. i tried waiting for an hour or so, maybe it would just come, but still to no avail. i tried re-installing everything, but still the same thing. but when i tried NOT TO INCLUDE the ARABIZER, everything worked just fine.
now, i'll just pray for two things, 1-that you can help me solve this problem, and 2-that the light at the end of the tunnel is not a train.
thanks. more power to you.
hi arcquisumbing
now if u still have a 2003 OS on ur device,wich i doubt it,(i've read ur post in the thread How can I increase Storage memory in WM 2005),then ur problem can be solved inchallah :wink:
*if ur device is i-mate,do the following:
1-remove arabizer from Ext ROM,so ur device can enter OS
2-install arabizer cabs after being in the OS
download arabizer cabs from here http://forum.xda-developers.com/download.php?id=6292
*if ur device is not an i-mate,then u have to wait untill my no brand arabizer succeeds.... :wink:
RAGO :lol:
Re: splash
arcquisumbing said:
good day.
i have similar problem. i am using i-mate ph10b (himalaya). it occured after installing items from an extended rom (specifically ARABIZER). i tried installing other items in the same extrom, and it just worked fine.
what can be the solution? i was hoping i can install the ARABIZER.
thank you.
Click to expand...
Click to collapse
Hey bro since you have an Imate! Download this file from clubimate http://www.clubimate.com/support/PPC/ROM/RUU172810WWE_CDL_SKU2.exe and flash it.
I'm sure your problem will be solved for sure
Ps : RUU172810WWE_CDL_SKU2.exe is just the Arabic Extended Rom
dead XDAII and XDAIIs
Hi RAGOv,
THank you for your willingness to help my problem
1. The one I said worked is for my xdaII, but only to pass the MODEL ID error (it runs well, after i use your attachment file. I upgrade it to O2 ROM upgrade 1.66 WWE). However, After finish upgrading, It still stuck on O2 splash screen.
2. Now, Im facing the other thing. "the dead XDAIIs". Its screen only appear O2 splash screen when i put on the battery(even i already did a hard reset). Then I tried to change mode into bootloader mode (by pressing power button, record, and reset).in the end, after I did an upgrading. it also stucks on O2 splash screen.
Please help...I dunno what to do anymore..
Hi, i'm using a rw6828 and tried flashing with a rom from wantat but i forgotten to delete the EBOOT.nb0 before i clicked "upgrade". Then the program stopped at 6% for a long time and didnt move. I disconnect the cables and tried to turn the device on.
THe device can go into the wm6 and the start button can be use but the screen is "moved" to the right side and other function is not working.
After that, i did a hard reset and the the os seem to work like normal. However, when i tried to go into bootloader mode to reflash the rom again, the bootloader screen doesn't seem to appear.
Is there anyone here that can help me? Thank you.
elus said:
Hi, i'm using a rw6828 and tried flashing with a rom from wantat but i forgotten to delete the EBOOT.nb0 before i clicked "upgrade". Then the program stopped at 6% for a long time and didnt move. I disconnect the cables and tried to turn the device on.
THe device can go into the wm6 and the start button can be use but the screen is "moved" to the right side and other function is not working.
After that, i did a hard reset and the the os seem to work like normal. However, when i tried to go into bootloader mode to reflash the rom again, the bootloader screen doesn't seem to appear.
Is there anyone here that can help me? Thank you.
Click to expand...
Click to collapse
Please try to searching before post new thread. Do u search about dead bootloader, try here
Thank you abusalza for the direction. I'm sorry i didnt use the search function to look up about dead bootloader. I'm actually not sure if it is a dead bootloader thats why i didnt look up in the forums for a specific problem.
Thank you so much for the link and i've discovered something new. I tried using the camera button + soft reset method and what it seems that i might have entered bootloader. But i have no idea what to do next.
Mod please close this. I've posted a new topic with an updated scenario of my problem under the upgrading section. Thanks again abusalza.
After trying to rebuild a ROM (NAFT's v3.0) by adding rilphone.dll file to it. Everything went well when I did it with NAFT's v2.3, but when I tried it on v3.0, my phone just stop at the AT&T World Phone screen... I did a hard reset by Pressing Volume Down + Enter + soft reset, but it still stuck at the AT&T screen.
I can still go into the boot screen, but I dont' know what I can do now.
Please help.
IS there a way to load a new ROM from the Bootscreen?
Load the ROM NBH file to your SD Card under the name RAPHIMG.NBH
Enter the Boot Screen and it should start Flashing the ROM.
Enter bootloader, plug the usb cord in, wait for usb to show up on the tri color screen, flash different rom.
Alternatively, you could enter bootloader and follow the directions for flashing from SD card.
Search for it.
Next reply will probably be by someone telling you to search for these questions first, and then someone will make a comment about your somewhat simple question for someone with your post count, and then a mod will say 'redundant thread closed'.
Good luck.
Copy a ROM to your root of your SD card /Storage Card. Rename the ROM file RAPHIMG.nbh
Then go to the bootloader. Should ask you to flash the ROM. Press the power button to begin flashing.
You could also try flashing the Stock ROM that came with you device via your pc with your device in the bootloader. Hook your device up to your pc in the bootloader it will say Serial or USB. If it's USB you should be able to flash as normal.
just like fox, ATW and navy said..
whenever u run into an issue like that..flash from ur SD
80% of the time it works.
ive been in ur situation before..its pretty ****ty..but u can bounce back real quick
Late,
Jstar
I follow the first advice... put it in boot screen and reflash the new ROM... hope this will work, crossing my fingers... Thanks guys for the very quick reply... it's flashing as we speak.
It seems to be working now... thanks guys.
Got so scared... I must give up the Call Display project... sounds too dangerous
same reason why i stopped messsing with the dialers on M2D
one to many things went wrong and i gave that up real quick..
but what ive learned..over time..
theres always a FIX..just gotta look for it.
Late,
Jstar
JstarLuvsTina said:
same reason why i stopped messsing with the dialers on M2D
one to many things went wrong and i gave that up real quick..
but what ive learned..over time..
theres always a FIX..just gotta look for it.
Late,
Jstar
Click to expand...
Click to collapse
It wasn't easy to search went you find out that you've just lost $500 because of a stupid step you did
However, I tried to manage myself to search through the forum for the words "Brick" "Unbrick" and "Flash ROM through Storage Card"... and I thought the world was ending, so I go for the last hope by posting a help thread
Thank and I love you all