Related
assuming I do sleep everyday till 7am ... I do not want anyone to wake me up before that time, I would like the wake up alarm to trigger XDA switch from "vibrate" to voice alarms informing about incoming calls if any, and then every voice call is announced with a voice alarm ONLY after a wake up alarm
going a step further ... I would like to set specific and predefined hours to make XDA be silent, say every friday from 1pm to 3pm .... and I want it to be automatic
regards,
monika
monika69 said:
assuming I do sleep everyday till 7am ... I do not want anyone to wake me up before that time, I would like the wake up alarm to trigger XDA switch from "vibrate" to voice alarms informing about incoming calls if any, and then every voice call is announced with a voice alarm ONLY after a wake up alarm
going a step further ... I would like to set specific and predefined hours to make XDA be silent, say every friday from 1pm to 3pm .... and I want it to be automatic
regards,
monika
Click to expand...
Click to collapse
Don't know if that really does what you want, but you can take a look at a programm called Meeting mute.
Have tested it a year ago. You definitly could say, that you can mute your telephone on existings enty in the calender....
HTH
Stefan
I don't know if it is added to XDA II or not, but I really miss having a Nokia-like profiles (meeting, silent, outdoor, ... etc). It's really tedious to adjust the volume options each time I 'm in a different condition :x
Biso007 said:
I don't know if it is added to XDA II or not, but I really miss having a Nokia-like profiles (meeting, silent, outdoor, ... etc). It's really tedious to adjust the volume options each time I 'm in a different condition :x
Click to expand...
Click to collapse
Think this could be done with the Ultra Profiler....
Stefan
ultraprofiler u mean an external software ??
is that software functioning also on XDA I ??
best regards,
monika
I think both programs works on the xda 1.
At the meeting mute software i'm sure.
The ultra Profiler needs WM2003 as i have in my mind.
Just search for it and take a look at it.
Stefan
thank you very much
monika
VAlert
Customize vibration on phone ring
This small program allows customizing vibration incoming call alerts.
Windows based phones vibrate either before the ring or constantly during the ring.
Having a short ringtone can possibly solve this problem, but with long mp3 ringtone the phone will constantly vibrate during the ring.
This program will enable Windows Mobile phones to produce short vibrations when the phone rings.
Vibration patterns can be easily changed by the user.
Possibly to match vibration patterns to the ringtone, so the phone will vibrate in a rhythm.
Very low (~4K) memory usage
This software is a freeware.
How to use
1. Install the CAB
2. Enjoy the program with default settings
3. The program is hidden by default. To display program window (if needed), run the program again
7. In Phone->Options make sure ring type is Vibrate and Ring
4. Edit script.txt to change vibration pattern. Every line in the file is a pair of vibration length and note pause
5. From the program window run Menu->Test to test the created pattern
6. Perform Menu->Hide to hide program window
What's new:
- More devices support, including non-HTC
- The installer executes the program upon installation (no soft reset required)
- No vibration on waiting call
- Support for incoming call ring mute (stop vibration)
- Silent start
- Even lower memory footprint - ~4K on standby (was 11K before)
sounds cool
gunna try now
you should make it so you tap the screen to show when u want it to vibrate instead of editing the .txt file
Edit: Great app but confusing to change the pattern
Edit2: lol doesnt seem to work on my vogue when i go to phone->options and press play its just a long vibrate
Ohh man i was about to post a thread on something like this. Thank you so much for making this!
Sounds nice. Will try it out. Thanks for sharing.
bedaweed said:
Edit2: lol doesnt seem to work on my vogue when i go to phone->options and press play its just a long vibrate
Click to expand...
Click to collapse
Play from phone options is not implemented. Open the program and click Menu->Test or just try an incoming call.
oh okay im gunna try now
hmm.it may be useful.thx.
bedaweed said:
you should make it so you tap the screen to show when u want it to vibrate instead of editing the .txt file
Edit: Great app but confusing to change the pattern
Click to expand...
Click to collapse
+ 100 i would guess
Downloading now,.
Thanks for sharing sir!
to save people the bother of working it out themselves, and to get everyone started...
here's my version of the Nokia classic message vibration
i can't hum it, so you'll need to try it, i guess!
Edit : Oh, by the way... is it possible to do something like this for recieving SMS / MMS / Email, or is that a different process altogether?
Dr J said:
Edit : Oh, by the way... is it possible to do something like this for recieving SMS / MMS / Email, or is that a different process altogether?
Click to expand...
Click to collapse
Yeah, that's what I wanted to ask too! Would be awesome, would be a very useful app, thanks. And yup, maybe an easier way to edit vibrates would be nice. However, it's cool now, for a version 1.
Future versions
Post your suggestions. I am making a list of changes for the next version.
Suggestions :
- a settings UI on the device (instead of having to pull the txt file off to PC and edit and then put back in on device)
- ability to change between multiple vibrate scripts (via drop-down menu or list?)
- if possible (?) ability to use vibrate scripts for SMS / MMS / Email / Other alerts
- vibe scripts that match pattern with the actual ring / message tone would be VERY cool
excellent little program, thanks a lot for the effort
if the other message alerts can be changed from within this (or even just another separate small app) it's just what i'm looking for!
and please can other people post their script efforts, it'd be good to have several pre-sets to start out with.
there might be a slight bug in this
a few calls have come through recently, the vibrate kicks in itself and the ringtone does not play for about 10 seconds or so.
also the programmed pattern seems distorted.
it might just be my device, as i'm noticing that S2U2's full screen call ID has been struggling to kick in when a call comes in these days since i started using Manilla2D as well.
it might be that the device is struggling to find the ID picture and the ringtone and the vibrate pattern at the same time, all the while trying to run M2D.
i'd check if it works correctly without all these extras running, but M2D and S2U2 are pretty much essentials for me these days.
anyone else care to help?
Dr J said:
there might be a slight bug in this
a few calls have come through recently, the vibrate kicks in itself and the ringtone does not play for about 10 seconds or so.
also the programmed pattern seems distorted.
it might just be my device, as i'm noticing that S2U2's full screen call ID has been struggling to kick in when a call comes in these days since i started using Manilla2D as well.
it might be that the device is struggling to find the ID picture and the ringtone and the vibrate pattern at the same time, all the while trying to run M2D.
i'd check if it works correctly without all these extras running, but M2D and S2U2 are pretty much essentials for me these days.
anyone else care to help?
Click to expand...
Click to collapse
Do you have this problem with all calls or just some?
What do you mean by distorted pattern?
Does this problem happens when VAlert is disabled?
Thanks works great on my prophet with 6.1
ochakov said:
Do you have this problem with all calls or just some?
What do you mean by distorted pattern?
Does this problem happens when VAlert is disabled?
Click to expand...
Click to collapse
i have that problem with calls but its only like 2 seconds not 10
Sounds nice. Will try it out. Thanks for sharing.
bedaweed said:
i have that problem with calls but its only like 2 seconds not 10
Click to expand...
Click to collapse
That's not a delay. By default (there is a registry setting to change it) the ring is delayed by 2 seconds. VAlert does not have that delay, so it will always start vibrating 2 seconds before the ring.
Nice tool... works goodm i like it!!!
Coming from a Blackberry, I used to use "Phone Only Mode" (Phone only goes off, if and when, it is a phone call) Is there any app or widget that can accomplish this? At night E-mail notifications and Facebook constantly wake me up. I would put it on silent, but I don't want to miss any important calls. Thanks in advance for any help on this matter,
Russ
Look for any apps that set up profiles by time. That should help u. Like from so and so time till the morning shut everything down but ringtone
98classic said:
Look for any apps that set up profiles by time. That should help u. Like from so and so time till the morning shut everything down but ringtone
Click to expand...
Click to collapse
Thanks I'll look into it.
I use AudioManager to quickly turn down the notifications and/or ring tones all from a single slider screen, but there are several similar apps that will allow you to set up sound profiles and quickly change via location (Locale) or via a widget.
rUsTyRuSs said:
Coming from a Blackberry, I used to use "Phone Only Mode" (Phone only goes off, if and when, it is a phone call) Is there any app or widget that can accomplish this? At night E-mail notifications and Facebook constantly wake me up. I would put it on silent, but I don't want to miss any important calls. Thanks in advance for any help on this matter,
Russ
Click to expand...
Click to collapse
Just disable the auto sync of data. then only the phone works,,,
I've been using bedside for 2 years and it rocks. You can setup white lists for texts, calls or whatever.
I love Tasker. It does cost a small bit but the customizable profiles are awesome. If you just want something for use at night, bedside may be good enough, but definitely look into Tasker if you want to automate anything else (for example,I have it set to start the GPS when I launch Google maps and to shut it off when I exit.
____________
Any typos or other oddities in this post are brought to you by the letters G & T, the number 9000, and Swype.
Nothing compares to a BB's sound profiles or email
I had an old phone that had 3 or 4 different styles of vibration that you could set to different forms of communication. This came in very handy as I could tell immediately if the vibration was for an incoming call or just a text.
I can't find that feature on the Streak anywhere. THere is only one vibrate style. Would someone (smarter than me) be willing to look into ways to create different vibrate settings?
ie:
loooooooong short looooooong.
constant.
short short short.
This way even if the phone is hanging out in your back pocket on vibrate all day (like mine mostly is) while you are talking to customers, you know if it is something you can leave alone or if it is something you should check immediately.
You can this with Tasker, trigger it so that when a notification comes from another app then run a particular sequence of vibrations. I use it to give a vibrating alert to Bugme which has a sound and popup but no vibrating alert of it's own. If the app has a built in alert I guess you would just turn it off and use tasker to run the sequence you like. Tasker can look a little complicated at first but is very useful even to non-programmers like myself.
mellojoe said:
I had an old phone that had 3 or 4 different styles of vibration that you could set to different forms of communication. This came in very handy as I could tell immediately if the vibration was for an incoming call or just a text.
I can't find that feature on the Streak anywhere. THere is only one vibrate style. Would someone (smarter than me) be willing to look into ways to create different vibrate settings?
ie:
loooooooong short looooooong.
constant.
short short short.
This way even if the phone is hanging out in your back pocket on vibrate all day (like mine mostly is) while you are talking to customers, you know if it is something you can leave alone or if it is something you should check immediately.
Click to expand...
Click to collapse
Another option I use is to use handcent or chompsms you can customize your vibrate pattern for texts that way.
Sent from my Dell Streak using Tapatalk
Hello. I'm opening this thread so everyone can tell little things that don't like, or want to be changed on our Neo-v, so developers can "make our wishes" true...
Thread will be daily updated...
CALLING
1.speed dialing - I wondering how its possible that modern phone doesn't have it??? There R 2 ways - first looong press on number or click on one number and then "dial"... These have a praistorical phones...
2.End call lock screen-(incoming) I notice that when I end my talking, screen locked it self...Even if dont answer or refuse call so I must unlock and then see missed call...
3.Call log-shows one same call-er in loooong list...is it better to show just last with options to show call history for that number
Uploaded with ImageShack.us
CAMERA
Need a lot of work on drivers...its just not that picture quality it has to be...
1.white balance -too much white on factory settings that make noise in artificially conditions (in house at night)
2.NO BEST PIC Great and very usefull shot-mode for driving of SE, so why they missed it in xperia models
3.Violet noise Sometimes i see this "ghost" when autofocus on lower light when there is a lite source at side of phone during picturing
MESSAGES
1.Message details - dont understand why we can't see detailes like sent time and recieved time...That what old SE phones has...So when I recieve sms, I cannot see when is send to me, just time when I recieved it...is it so hard to pu it...
VOICE RECIRDER
Am I stupid or I can't find this or is it POSSIBLE that modern phone doesn't have it????
MULTITASKING -
Phone dont have minimaze options, some app's stay but some not in ram after press midle botton...So I use Advanced task killer to get back to my working app's...
Regarding multitasking: have you tried long pressing the HOME (middle) button?
You will see the 8 last started application, and you can easily switch to them. Note that they might have been removed from the memory, but some apps can still restart into the same state.
Totally agree with u on speed dialing and call log.
Use handcent sms...its great replacement for the stock messaging app
About sound recorder, i can see that in manage applications under 'all' but yes its missing in app drawer..i dont know how to launch app from there.
I think notification led is at silly place..
known2u said:
Totally agree with u on speed dialing and call log.
Use handcent sms...its great replacement for the stock messaging app
About sound recorder, i can see that in manage applications under 'all' but yes its missing in app drawer..i dont know how to launch app from there.
I think notification led is at silly place..
Click to expand...
Click to collapse
yes here too notification led is placed in a weird place , on the side....meh
also i wish it had a bit bigger display say 4inch
skyboyextreme said:
yes here too notification led is placed in a weird place , on the side....meh
also i wish it had a bit bigger display say 4inch
Click to expand...
Click to collapse
LOL What XDA-developers can do to make the screen bigger? haha
Just buy Xperia ARC
Hmmm...For me it has to be the speed dial and call logs.