I am trying to restore a backup created on a previous ROM version to my new Qtek 2020, which is running ROM version 1.66.00WWE. I receive an error message say that the "ArcSoftToday.." file located in Windows could not be copied and at the same time the Qtek writes: ”Unable to read Contact Data! (Error code: F000985E) 101:200:563"
The result is that the screen on the Qtek once restored is blank (can't be used) although all files seem to be restored.
Any advice would be appreciated..
Hi Thomas,
Try disabling your MMS Composer from your Today-screen!
1. Start - Settings - Today - Items
2. UNCHECK "MMS Composer"
3. Tap OK
4. Perform a soft-reset
MMS-Composer will be removed from your today-screen.
Try restore again!
Let me know if this works!
Sam
Hi Sam.
I did not receive the error message on the PC, however the screen is still blank and the Qtek error message ”Unable to read Contact Data! (Error code: F000985E) 101:200:563” still appeared.
Thanks for helping...
Thomas
Hi,
There could be a difference between your 2 Poutlook-versions...
Don't know how to solve this...
Maybe your backup-file is corrupt.
Sam
Related
Hello to everyone,
one of my installed applications (TT5) needed a patched file. After
installing this patch my phone and contacts does not work anymore
(more accurate: Phone & contacts apps does not show any GUI - it
doesn't matter how I start them).
After removing the mentioned application I tried a lot to get them work
again, but without success. I decided to reinstall WM5.
Now the buttons HW-buttons does not work. They try to start the linked
app, but nothing happens - the taskbar shows shortly the name of them.
Also they are not displayed by the taskmanager.
Everytime when I reinstall WM5 (HimaUpgradeUt) I recognized, that
previous installed stuff is still in memory.
My Questions:
How can I make a REAL CLEAN BLANK WM5 installation (inclusive other
memory parts, if the above mentioned patch was destructive to them)?
If you have any question, I will try to answer them here.
Thank you in advance!
Hi...
enter bootloader mode by pressing power button+camera+record+reset....wait for about 4 seconds,then the bootloader menu will appear...
U will have 3 choicesnavigate with the record button,change status with camera button,confirm with navigational pad)..
enable kitl----leave it no
clean registry Hive-----change to yes
Format Storage-------change to yes
RAGO :lol:
Thanks for fast reply.
This does not work for me... any other idea???
Current setup (I downgraded few minutes ago):
-------------------------------------------------------
WM2003
ROM: 1.72.01GER
Radio: 1.17.00
ExtROM: (-nothing entered here-)
Thank you in advance!
ur current setup shows that u don't have Magneto on ur device anymore....therefore,my 1st post instruction won't work unless u have WM2005 installed....
Magneto install softwares and data on Rom,so they are persistent memory and will survive even flashing....
now do the following:
-access the storage folder from ur explorer (not windows exp.) and format it....
-unlock or unhide extended ROM...the delete all data....
other way?....here u go:
-reinstall Magneto on ur device,then do what i advised in my above post....u will have a clean storage...then downgrade if u want.... :wink:
Good luck...
RAGO :lol:
Hello,
the past few days I was not at home...
Ok, I manged it. Thank you all for fast helping!!!
Have a nice week @all
Hello !!
I have qtek 1010 german version! After i read the links i decided to upgrade the rom version, because i barely manage in english, not to metion german.
I downloaded a rom from http://www.romkitchen.de, i complete the setup with no errors and i thouht it was a success. Now in start menu i only have Recent Programs (with no access to tap on it), Today, Find and Help, and the screen logo xda-developers.com. Cant do anything the best result when i tap something its : "No program memory available. Tap Start>Settings>System tab>Memory, stop programs that did noy not automatically stop, and try again". But in start i have nothing
I downloaded another rom version 4.01.12_ENG, but now i can not connect the pda with activesync, so i cant make another upgrade.
So, please, help!!
Thanks, Regards!
Hello there.
In some occasions the roms versions has that problem, that is after upgrade, you cannot upgrade another one.
Itś simple, if you have a card reader external, you create a image from OSImage available in this site to the SDcard.
Then you reset the XDA by pressing the on botton in the same type you put the pencil in the botton of XDA.
It will start with Bootloader, then if ther is no problem at all, it will ask you if you want to install that rom that you have on the SDCARD.
After finnish you have to do a Hard Reset.
Then i think for mi experience that you have your problem resolved!!!
Hi.
I installed 2 different released of WM6 (PDAViet 4.0.0.3 & Pda Mobiz 1.1i)
Then I've always the same problem synchronisation with contacts calendar and tasks doesn't works with activesync 4.5.
Also Contacts shortcuts doesn't run, open and close immediately.
Message box in activesync 4.5 :
"There is not enought free memory in your device to synchronize. Close programs that are running to free up memory, or restart device.
ID error : 800700e"
I restarted device and computer but I 've always the same problem.
Can you help me please?
radio rom : 2.69.21
Resolved but BT receiving files problems
I resolved my problem
A "Settings/System/Remove All Datas" solved it.
I can send from my device but i can't receive from Bluetooth.
raimsse said:
I resolved my problem
A "Settings/System/Remove All Datas" solved it.
I can send from my device but i can't receive from Bluetooth.
Click to expand...
Click to collapse
I can't receive from BT from my PC.
Message: "FTP SERVICE NOT AVAILABLE"
Happens with Fantastic 4b on Prophet G3
I got the same error. Start|Settings|Clear Storage, then it did a hard reset.
After boot, change regional settings, soft reset (the device ask for restart after the change from thai), stablish device name, change day and hour.
Sinchronize ok.
Ive re flashed to the excellent rom by Vlodeck all is good apart from not being able to received or download mms. I can send mms ok and i can send mms to myself which open ok but all others will not download. Anybody got any ideas?
Have you configured gprs correctly?
All sttings for o2 in the uk have been confirmed. this was after i tried the auto detect. I can send an mms to myself which opens fine suggesting that I have the correct settings but when i try to open an mms I have received it doesnt download. Tried new settings from o2 this morning and messgae downloads to 4% before I get the message stating unable to download message. Prior to o2 this phone was on t mobile on wm5 and worked fine, could it be something to do with the file type in trying to open? Many thanks for your help.
I have to say, I've never used MMS feature on my charmer. Maybe someone could confirm whether or not MMS works.
It may have something to do with the text format, not sure though.
I reflashed the same rom and managed to recieve an mms from another o2 customer! This was after I resized the mazimum file size to 100k, not 300k. Later on one of my previous messgaes from somebody else tried to download again but would not complete. Im at a loss?
Ask your friend to MMS a single picture to you (below 100kb). See if it works.
All messages were less than 100k to start with. I have tried a new sim card which is still the same. I can receive from o2 but not other operators. I did try to flash back to the t mobile wm5 rom to start again but even that has failed now as I get an error message 260 pop up! looks like im stuck with a partially installed wm6. any advice on how downgrade to wm5 so I can start from fresh will be appreciated.
Ive just read a thread relating to problems with o2 and mms. seems to me that the problem I have is that o2 doesnt recognise my device from the settings that are stored on my device. Does anybody have a list of the registry relating to mms from a wm5 rom? (I would ahve flashed back but seem unale to at the mo)
Hello (excuse me my english is not very good)
I have a Samsung Galaxy S I9000
Yesterday I install MIUI 2.3.5
My IMEI was corrupted but I restore my backup with efsrestore and it's OK, everything works fine except SMS
I can't send SMS
I try a lot of configuration for my provider and each time fail
I try to manually enter SMS server phone number, I go to SMS advanced settings and I type in the text field +33660003000 and by pressing on OK button system says server not responding and a few second later the com.android.phone crash and restart.
I search in what file on android system are stored provider settings for trying to write directly the SMS phone number in the file.
Is this possible ?
if yes where is this file and can I edit with kate because I'm under Kubuntu on my computer
Thanks a lot to everyone.