Related
It's incredible. After 7 hours working and battery full......I tried to turn on and nothing happens. I have had to hard reset and will try to downgrade to 1.52. Carrier Devices--> IT'S INCREDIBLE ¡¡¡¡
That's worrying, I in my 7th hour! after a smooth upgrade. Reckon if this upgrade does'nt sort it I will sell my unit and go back to Nokia!
How is possible
How is possible that CD didnt test it correctly??. I dont know what to do..... Downgrade....Sell my imate...
Dunno, lets see what comes up in these forums over next few days. So far my imate is doin OK, but like you I think I will be fed up if i start getting 'freeze" and forced hard resets again.
after removing claunch and pocket plus i havent had any of those freezes with my 1.66
mmmm, I will uninstall pocket plus...
thanks :lol:
Yes think you should....1.72 is FAST and rock solid.
what do you think pocket plus does to cause the freeze with 1.66 or 1.72. I thought the freeze was a problem with the radio version on 1.66. I run spb pocket plus v2, do you reccoment i drop it?
i run pocket plus v2 with 1.72 and 1.66 b4.... no such problem occurs...
Second time en 36 hours. After being in my gym (without coberture) i couldnt turn on the imate. I only could hard reset.
My device information is :
ROM Version: 1.72.00WWE
ROM date: 03/15/04
Radio Version: 1.14.00
Protocol version: 1337.24
ExtROM version: 1.72.800
I didnt restore my applications (i installed them from scratch).
The software that i ve installed is:
Mobimate WorldMate Pro
Paragraph calligrapher
Access NetFron 3.1
Resco Explorer 2003
Caywen Kevtris
RealCalculator
Spb Full Screen Keyboard
Spb GPRS Monitor
ScaryBear CheckNotifications
ScaryBear ClearNotify
Omega one battery pack
Tom tom gps (3.0)
Pocket Informant 5
Please help. Do you think that it's a problem of the rom? maybe the problem is in some the applications??
Please helppppppppppppppppppp
Did you restore a Backup after upgrade, or did you install all programs from scratch?...
I restored an upgrade after the 1.72 beta upgrade, and my device
then acted just like yours. It gets totaly dead for no special reason.
It also ate alot more of the battery!
I think that some programs or system DLL files have been changed in WM2003 in the new 1.72. And that´s whats causing the strange behavior.
Because when i installed all the aps from scratch, without restoring a backup everything worked perfect!
I did upgrade Thursday ( 2 days ago) all was going really well, till today. In my workplace, a radiology department, signal strength comes and goes. Guess what, my unit froze, no response had to do a hard reset. Same symptoms as with the 1.66 ROM. I don't understand what CD are up to! I have read the threads about Spb Pocket Plus (which I run) etc.. but there are so many happy users of this and other apps out there I find it hard to believe that it is responsible, I am sure it is a bug with the radio , which as far as I can see is not resolved, I bet more complaints will be forthcoming from 1.72 ROM users, not just us. (PS i started from fresh loading my apps, not a resore from previous ROM).
I have the same problem last night (for the first time), my XDA II blank when I put it in to cradlle soft reset not working, the only way is to hard reset. This is a strange behavior. :x
radio stack
I think is a problem of the radio stack. The problem appears when signal strength comes and goes. I thougth CD had solved it....But now i am sure the problem remains....
I don't think it has anything to do with the radio stack?
I believe that it is SPB software, GPRS monitor, Pocket Plus etc. I had to hard reset after a lockup but after I removed ALL SPB software I have had no issues at all. Nothing very stable and 3+ days of heavy use. Try it...remove ALL SPB software and run for a few days.
Remember 1.66 had a Microsoft Service pack 1 and 1.72 has Microsoft Service Pack 2 in the ROM. I believe there must be some issues with SPB and the service packs.
I LOVE their software but I cannot live with lockups and hard resets. So I either downgrade the rom (not an option - rom is very stable I find now, fast and my BT headset works great) or remove all their software till they sort things out.
I have run SPB GPRS monitor and pocket plus (the NEW 2.0 version) for a couple of weeks now, under heavy use. And i have had NO issues whatsoever.
i havent had any of those having to hardreset since
i removed spd plus (not the newest version)
and claunch
suppose it could just be a coincident
but i'm not installing those 2 programs again
well i also removed some of the phm software at that time come to think of it
OK guys, I am going to give it a go, will uninstall my GPRS monitor and spb pocket plus v 2, and see what happens, will let you know.
Well the best way would be a hard reset and then NOT install the apps but it is some work to do that. Hope that the uninstall does uninstall everything most do not.
Let us know...good luck.
Hello folks,
I have the exact same problem descrived above. And I use SBP's Pocket Plus, but honestly I think it has nothing to do with this problem since I hard reset my MDA2 and use it with factory defaults, no applications installed but eventually the problem came back! :evil:
It's really weird...
Let us know if somebody manages to reproduce the problem, since It occurs at random intervals.
Best regards,
Rayan
hmm ... i upgraded to 1.72 today ... within hours, it froze and sort of reseted itself and got stuck at the imate screen. Did soft reset and still stuck at the same screen, turned off xda and turned on again .. .same result. So had to do a hard reset ... luckily i restored everything within min with sprite backup.
Something interesting though, when I turned off device and pulled out battery, the screen still displated half of the imate screen ... i guess its eating off the backup battery ...
Anyway ... hope someone comes up with a fix soon ... otherwise its gonna b a pain if this keeps happening.
Hello, does anyone solve this problem, i have the same problem and it's really anoying
hehe
mine jus played up on me again yesterday. AGAIN while playing with phonedashboad but anyhow, i dont like this rom, prob gonna downgrade to 1.66 or 1.6
Well I am now 9 days on since I did a voluntary hard reset after experiencing 2 forced hard resets in 4 days with ROM 1.72 (all mmy favourite apps running including Spb Pocket Plus, GPRS monitor and others). I decidied to hard reset, start witha clean system, installed only PI, Fitaly and Sprite backup, 9 days now of trouble free i-mate usage. I am now installing apps one at a time to see what happens, stared with Hudson mobile phone dashboard, so far 2 day and all s well.
I am starting to form the opinion that my problems were down to running to many today plug ins, as i used to run all of the following :
Spb Pocket Plus v2.
Spb GPRS Monitor
Husdon Mobile Phone Dashboard
Kitara Genesis
I am a little more happier with the radio version, though i must admit i am cautious about staying too long in zones of bad or no reception.
As dherreo mentions, if you have to be a long while in a no reception zone, may be better to switch the radio off. I have my i-mate forward calls to my pager so i don't miss any incoming calls.
dmjames
Try playing around with phonedashboard such as puttin in the M2M numbers and fiddling around wiht the settings for a while. It doesnt happen everytime, but both my forced hard-resets have been during setting phonedashboard.
I havent installed spb software cos there were some speculation about conflicts with the new rom.
Well well well,
i had a very unstable and finally within about 36 hours after installing that Spb software it came to a hard reset.
now i read about it, i can finally see what it was that caused the hard reset.
I had been thinking and thinking what I installed that caused my mda to crash. but now i know it Spb Software or it has a very high probability chance
Hmm..did any of you notice the blue LED light lite when the system frooze.
My did 2 times, in three days at nearly the same time!..mine is Rom1.66..
1.66 was very stable for me besides the battery drain and slight slowness compared to 1.72 ... beside that, it neva froze once....
no hang-ups
I am using 1.72 for a week now -with Spb (!)- and it works stable
My device information is :
ROM Version: 1.72.00WWE
ROM date: 03/15/04
Radio Version: 1.14.00
Protocol version: 1337.24
ExtROM version: 1.72.126
Spb pocket plus 2.00 build 1184
Spb GPRS monitor 2.12 build 306
It seems for me there is no problem with 1.72 and Spb software.
I did however remove the "3_networkname.CAB" from the ExtROM, because I never see this before (and I don't have an i-mate). Could this be the difference?
I do have some strange problem with Alturion BT GPS serial connection since 1.66 (but not from start). All indications on the BT GPS suggest that there is a good BT connection and satelites are found but Alturion is claiming there is no GPS available. Later I installed TT3 and this had no problem with the BT GPS connection.
Probably this has nothing to do with 1.72 (or 1.66) but with the ****ty drivers from Alturion.
Ronald
So this is my first post but i've been around for quite some time
Here's the deal, I bought a second hand Qtek S200 prophet which came with the original PTG wm5 rom. I flashed PDAVIET 4.0.0.6 and everything went fine.
As the days passed I started do have screen flickering and random boots followed by 30m without a life sign or boot and reboot again.
I thought the problem was the famous boot screen freeze so I decided to flash Gollums Prophet Touch VII.
The real deal starts now...
the flickering worsened... The reboots remained(especialy when charging or active sync).
Wi-fi stopped working doesn't connect. Battery consumption dropped from 4 days with pdaviet's rom to 1 day.
So I returned to PDAViet but to no avail... problems remained... reboots, screen, battery and wifi...
Tried PDA transformer... nothing...
Tried WM5 rom ENG and WM5 PTG... nothing...
Updated SPL and IPL... nothing...
Updated radio rom... nothing...
Hard reset, flashed roms and soft reset like hell... nothing...
Here's the specs:
IPL 2.20.0001
SPL 2.20.0001
RADIO 2.47.21
wm5 2.20.7.29 PTG
So any clues to any of these problems?
philocritus said:
So this is my first post but i've been around for quite some time
Here's the deal, I bought a second hand Qtek S200 prophet which came with the original PTG wm5 rom. I flashed PDAVIET 4.0.0.6 and everything went fine.
As the days passed I started do have screen flickering and random boots followed by 30m without a life sign or boot and reboot again.
I thought the problem was the famous boot screen freeze so I decided to flash Gollums Prophet Touch VII.
The real deal starts now...
the flickering worsened... The reboots remained(especialy when charging or active sync).
Wi-fi stopped working doesn't connect. Battery consumption dropped from 4 days with pdaviet's rom to 1 day.
So I returned to PDAViet but to no avail... problems remained... reboots, screen, battery and wifi...
Tried PDA transformer... nothing...
Tried WM5 rom ENG and WM5 PTG... nothing...
Updated SPL and IPL... nothing...
Updated radio rom... nothing...
Hard reset, flashed roms and soft reset like hell... nothing...
Here's the specs:
IPL 2.20.0001
SPL 2.20.0001
RADIO 2.47.21
wm5 2.20.7.29 PTG
So any clues to any of these problems?
Click to expand...
Click to collapse
I would advice you to flash an official ROM, but I understand you did that already. The only thing I can think of is a hardware failure. Not all that nice, sorry....
You may be right about the hardware failure on the flickering screen and reboot...
but...
wifi and battery worked well until install of prophet touch Vii
philocritus said:
You may be right about the hardware failure on the flickering screen and reboot...
but...
wifi and battery worked well until install of prophet touch Vii
Click to expand...
Click to collapse
When you downgrade to the official WM5, all drivers and so on will be replaced. You start brand new, fresh and clean. Nothing from any WM6 cooking should remain. So, if the problems persist, logically the haven't anything to do with these ROMs. To my knowledge is it not possible to damage your harware with flashing the OS to WM6..... (but my knowledge is hardly complete...)
So, I cann't give you a solution or explanation, but maybe it helps you a bit futher, succes anyway!
You're right. I'm no newbie when it comes to software all around and I know that flashing gives you a fresh start.
But I do find it very weird that the wifi stopped working since...and I'm absolutly sure it worked before so i'm guessing some registry settings are causing the problem. With pdaviet when i pressed wifi on comm manager the antenna appeared on the top task bar searching for signal and the button stayed on even if no network were to be found.
After the flash that icon never appeared again and the button remains off every time I press it.
What is even more weird is the battery life! 4 days to 1 day? without usage? I stylus soft reset and still 10% an hour battery comsumption! with a base wm5 rom! I'ts just too much!
philocritus said:
You're right. I'm no newbie when it comes to software all around and I know that flashing gives you a fresh start.
But I do find it very weird that the wifi stopped working since...and I'm absolutly sure it worked before so i'm guessing some registry settings are causing the problem. With pdaviet when i pressed wifi on comm manager the antenna appeared on the top task bar searching for signal and the button stayed on even if no network were to be found.
After the flash that icon never appeared again and the button remains off every time I press it.
What is even more weird is the battery life! 4 days to 1 day? without usage? I stylus soft reset and still 10% an hour battery comsumption! with a base wm5 rom! I'ts just too much!
Click to expand...
Click to collapse
You are absolutly right that things aint normal, especially when it occurs with an official WM5 ROM. I guess you're talking about behavior without any other programs installed? I'm out of sugestions. Hope you find an answer though!
The fact that the wifi has worked and youre device began flickering and rebooting before it started not working could be the explanation.. If the device have had a hardware failure, that made the screen flicker and reboot the device, could damage the wifi chip and therefore it dosn't work anymore.. That would be my suggestion, but ofcourse only a suggestion..
I am having problems with several keys on the keyboard. It is not consistent but just enough to be annoying. I get duplicate spaces, 'I', 'O', and several other keys. Any suggestions on how to remedy?
Thanks!
Me too
I am having the same problems. It all started after I updated the new Sprint ROM. So, if somebody has any insight or knows anything about this it would be great if you would pass it on. I'm going to go into sprint tomorrow before work and see what they say. Thanks in advance.
What have you tried to do already?? What ROM are you running??
I'd start with a Hard Reset. (Press both Soft Keys and hit the reset pinhole). If that don't work, try flashing the ROM again?
Thanks for the posts. I am using DCD 3.0.1. I have already done a hard reset and re-flashed. Interestingly, when I do a reset I see the PPC Geeks splash screen leftover from prior to DCD's 3.0.1.
Perhaps I should go back to the Alltel stock rom and see if it persists. Thoughts?
I had the same problem...with the same keys. Mine also started after flashing DCD 3.0.0 ROM (though I think that was a coincidence). The problem persisted after I flashed back to the latest Sprint ROM. I just had Sprint replace it under warranty.
count me as having these problems as well.. and it's happened ever since I upgraded to a dcd rom in feb..since then i've flashed my rom 6 times I think and each time, this problem pops up at random...really annoying. and ya i've hard reset, reflashed and all that.. this one problem alone had me considering buying a blackberry cuz I email my clients a lot from my phone and when i have to hold down O or A or R to make sure the letter registers, its annoying..any clues?
My phone has done this too. I recall it happening after flashing to the beta radio and DCD's rom. It seems like it has gone away, I'm running DCD's 3.01 on Verizon and haven't noticed for a month or so.
I flashed back to the original Alltel ROM and so far it seems to be better. Keep you posted.
Flashing back to the original Alltel Rom seemed to have resolved this issue. I may try dcd's again when 3.0.3 is released but for now, the keyboard is important enough for me to lose GPS.
I found a supposed fix at http://forum.ppcgeeks.com/showthread.php?t=23875
it seems to be working for others with this problem. Post here at xda if it does happen to work for you.
Hi there all,
<rant>
So I finally got around to flashing WM6 onto my hermes... to give you a bit of background; I had completely stopped using my hermes and had gone back to my ancient (in tech terms) Nokia 6230i after WM5 had become perishingly slow. It had become so much of a pain to connect to my parrot handsfree that I had stopped using that too... (£114 wasted). Also on every phone call there was at least a three ring delay from someone calling me, to my phone realising it should be ringing... not impressed.
So I thought that a flash to a WM6 rom might help, after having a look around for a little while, I went for Schaps 4.31, initially, its a massive improvement, the phone is quick and responsive, and generally runs much quicker, plus there are lots of nice little things like HTC home...
However the delayed phone ringing still seems to be an issue... when I am in the middle of using the phone or if the phone is out of standby and I receive a phone call, it seems to react much quicker than WM5 ever did, almost instantly realising that it should be ringing, much better. However, if the device has gone into standby, then it will completely ignore that there is an incoming call... It simply does not ring... I have just tried 3 or 4 times and my phone hasn't rung once, after I have hung up on my home phone I have been bringing the device out of standby to see if it has registered the call at all, as soon as I turn the device on there is a missed call on it...
This is so intensely irritating! As I am sure you can appreiciate! At least with WM5 there would be a wait of 3-4 rings beofre it brought itself out of standby and then it would ring, but with WM6, nothing! Surely I can't be the only one experiencing this? I can't even say that this might be just my hermes, as I had it replaced by vodafone about 2 months ago...
Sadly... I will be reverting back to my Nokia after I have written this, at least it is able to send/ receive calls without falling over... I cannot belive that I have a piece of hardware sitting on my desk that is, after all the bells and whistles, supposed to be a phone, and doesn't work as one!!! If an old Nokia can manage it why cant my hermes? At this moment there is a hermes selling on ebay of £139, I am very tempted....
Annoyingly my friends iPhone seems to do all the phone functions flawlessly along with lots of lovely web and data integration... It is still apple though..
Does anyone have any suggestions to improve my woes?
Sorry for the massive <\rant>
trinityj5
Update...
About half an hour ago I completed a radio ROM update to 1.56.70.11, I thought that updating the radio stack might go some way to solving my delayed call issues.
Well it hasn't helped at all. The acquisition of signal, and the strength of that signal seems improved, but if my device is in standby then it simply doesn't wake up if there is a call coming in. This effectively renders my tytn totally useless...
Does anyone have any ideas on what might be causing this? I am sure I can't be the only person experiencing this...?
For reference my phone is now running:
Rom: Schaps 4.31 LITE
Radio: 1.56.70.11
Any help would be hugely appreciated...
Trinityj5.
You could try updating the os to fix the standby problem... Schaps 4.31 LITE is fairly old now, If I was you I'd try a wm6.1... They're fairly stable now and are pretty quick too. You could also try to update the .net framework on your PDA to 3.5 but this may require you to do some registry tweaking. Easier to find a cooked os with .net 3.5 already cooked in.
I've always had my phone wake up when a call comes in - even in standby so not sure why yours doesn't. Could be a setting you or your network have imposed.
Make sure you've Hard SPLed your phone before flashing though...
Cheers...
Thanks for your reply ultramag, I think I did at some point have a 6.1 ROM on my hermes, and I don't think it made any difference to the call delay issues. I will flash one again tonight and then report back...
Which 6.1 rom would you recommend?
Why would updating the .net help with incoming call issues?
Cheers.
For the wm6.1 roms I prefer the PDAViet roms and PDACorner roms. Other roms are good too but I like these ones best...
I don't know if updating the .net framework on your phone will speed it up but it does seem to speed up windows. I may be wrong, but if you can speed up the time it takes windows to register the call then wouldn't it speed up the time it rings?
I believe you can change the call forwarding time up to 30 secs if the network only gives you 5 or 10. Its in settings>personal>phone>services>call forwarding.
Hope this helps...
Cheers...
Will upgrade to WM6 lock phone again?
Greetings to All and Thank God For this Forum
I successfully unlocked my Cingular 8525 >year ago. I am still running WM5. I would like to use a micro sd card greater than the 2Gb now installed and believe that is possible with WM6 OS. I'm concerned that I not lock my phone if I upgrade with AT&T's download of WM6. TIA-
docwollf, not sure posting in here will get you very far, try posting in the main forum...
ultramag69, thanks for your suggestion about the PDAviet and PDA corner roms, I tried both, and still my phone doesn't want to work.... Do you think that flashing an "official" rom might help? There has been some mention on here that if your phone starts to become unstable then flashing an official ROM may help, do you think it might help me?
Does anyone have any idea at all why my phone might not ring when it's in standby? Its starting to become intensely annoying to be honest....
Trinityj5.
Try flashing the official rom first, then flash your phone with hardspl, then try the new rom. That may work, but it almost sounds like you have a hardware issue.
Thanks for your reply backspacepc,
When I said to install an official ROM, I meant one like the at&t one or the dopod aisa one, I don't have a WM6 ROM for vodafone, they never released one... would going back to the Voda WM5, then hard spl, then a WM6 ROM help do you think?
I am thinking the same as you about hardware... is there a firmware upgrade at all? I have tried over 10 different ROM's now, some WM6 some WM6.1, still no improvement on the ring delay....
If I hadn't have voided the warranty by flashing etc, I would be sending it back....
Any help is hugely appreciated, as you can probably tell, getting quite exasperated with it now...
Trinityj5.
If you downgrade the SPL back to stock and the original os back to stock then you can take it back under warranty. There are instructions in the wiki on how to do this. I believe you may ALREADY have Hard SPL on your Hermes (to check go to bootloader - hold power, OK button above flywheel and reset with stylus, hold in untilyou get to the tri-colour screen. If your SPL is 2.10 olipro, its Hard SPLed) which means you're gonna have to downgrade the SPL. Unless you supercid your Hermes.
You can find the downgrade instructions, I believe, in mr Vanx's tutorials...
Cheers...
Thanks for your reply ultramag,
I do indeed already have Hard SPL on my hermes, I put it there...
I have been looking at downgrading back to stock and then seeing if I can get it replaced, I find it unlikely that voda will even consider it to be honest... HTC might though...
Is there a hardware upgrade that I can try out at all?
Cheers,
Trinityj5
If you open it then you will DEFINATELY void warranty... If you still are within the warranty period its better to send in for repairs than to fiddle yourself.
There are manuals floating around (HTC service manual) that tells you how to take apart and put your Hermes back together, just do a search. Or if you want try Mike Channon's webpage, found at the bottom of his posts. However, if you still have warranty, thats the best way to go...
Cheers...
Sorry! I didn't mean hardware upgrade, I meant firmware....
Are there any firmware upgrades around? It strikes me that the phone doesn't know how to handle a call when it is coming in, so it just ignores it... A firmware issue?
Cheers, sorry again for the mix up!
tj5
1st thing I'd do is to check all my settings. Both phone and volume. Maybe, if you back up and restore the same settings, you've backed it up for silent or vibrate only.
I know that when a call comes through that its slower to wake up from standby when it also has to access the sd card for an MP3 ringtone....
Check out, with Schapps advanced config, how long it takes the battery & AC to resume from timeout. I set mine to about 10 secs.
Also, you should check how much time it takes before call forwarding kicks in. Go to settings>personal>Phone>services>call forwarding. You can set it to a maximum of 30 secs.
These may or may not help, I'm just throwing ideas out.
Hope they help...
Well I didn't back up my settings, it was a brand new phone when I started so I didn't have any settings to restore.
I have mine set to 10 secs too...
My call forwarding is also set to 30 secs...
Thanks for all your suggestions, I think I might downgrade everything back to stock and see what happens from there...
I'm still wondering what exactly is going wrong in my device... It must be some kind of programming setting that has been set wrong... utterly bizzare... can anyone offer any advice to this end?
tj5