Hi there all,
<rant>
So I finally got around to flashing WM6 onto my hermes... to give you a bit of background; I had completely stopped using my hermes and had gone back to my ancient (in tech terms) Nokia 6230i after WM5 had become perishingly slow. It had become so much of a pain to connect to my parrot handsfree that I had stopped using that too... (£114 wasted). Also on every phone call there was at least a three ring delay from someone calling me, to my phone realising it should be ringing... not impressed.
So I thought that a flash to a WM6 rom might help, after having a look around for a little while, I went for Schaps 4.31, initially, its a massive improvement, the phone is quick and responsive, and generally runs much quicker, plus there are lots of nice little things like HTC home...
However the delayed phone ringing still seems to be an issue... when I am in the middle of using the phone or if the phone is out of standby and I receive a phone call, it seems to react much quicker than WM5 ever did, almost instantly realising that it should be ringing, much better. However, if the device has gone into standby, then it will completely ignore that there is an incoming call... It simply does not ring... I have just tried 3 or 4 times and my phone hasn't rung once, after I have hung up on my home phone I have been bringing the device out of standby to see if it has registered the call at all, as soon as I turn the device on there is a missed call on it...
This is so intensely irritating! As I am sure you can appreiciate! At least with WM5 there would be a wait of 3-4 rings beofre it brought itself out of standby and then it would ring, but with WM6, nothing! Surely I can't be the only one experiencing this? I can't even say that this might be just my hermes, as I had it replaced by vodafone about 2 months ago...
Sadly... I will be reverting back to my Nokia after I have written this, at least it is able to send/ receive calls without falling over... I cannot belive that I have a piece of hardware sitting on my desk that is, after all the bells and whistles, supposed to be a phone, and doesn't work as one!!! If an old Nokia can manage it why cant my hermes? At this moment there is a hermes selling on ebay of £139, I am very tempted....
Annoyingly my friends iPhone seems to do all the phone functions flawlessly along with lots of lovely web and data integration... It is still apple though..
Does anyone have any suggestions to improve my woes?
Sorry for the massive <\rant>
trinityj5
Update...
About half an hour ago I completed a radio ROM update to 1.56.70.11, I thought that updating the radio stack might go some way to solving my delayed call issues.
Well it hasn't helped at all. The acquisition of signal, and the strength of that signal seems improved, but if my device is in standby then it simply doesn't wake up if there is a call coming in. This effectively renders my tytn totally useless...
Does anyone have any ideas on what might be causing this? I am sure I can't be the only person experiencing this...?
For reference my phone is now running:
Rom: Schaps 4.31 LITE
Radio: 1.56.70.11
Any help would be hugely appreciated...
Trinityj5.
You could try updating the os to fix the standby problem... Schaps 4.31 LITE is fairly old now, If I was you I'd try a wm6.1... They're fairly stable now and are pretty quick too. You could also try to update the .net framework on your PDA to 3.5 but this may require you to do some registry tweaking. Easier to find a cooked os with .net 3.5 already cooked in.
I've always had my phone wake up when a call comes in - even in standby so not sure why yours doesn't. Could be a setting you or your network have imposed.
Make sure you've Hard SPLed your phone before flashing though...
Cheers...
Thanks for your reply ultramag, I think I did at some point have a 6.1 ROM on my hermes, and I don't think it made any difference to the call delay issues. I will flash one again tonight and then report back...
Which 6.1 rom would you recommend?
Why would updating the .net help with incoming call issues?
Cheers.
For the wm6.1 roms I prefer the PDAViet roms and PDACorner roms. Other roms are good too but I like these ones best...
I don't know if updating the .net framework on your phone will speed it up but it does seem to speed up windows. I may be wrong, but if you can speed up the time it takes windows to register the call then wouldn't it speed up the time it rings?
I believe you can change the call forwarding time up to 30 secs if the network only gives you 5 or 10. Its in settings>personal>phone>services>call forwarding.
Hope this helps...
Cheers...
Will upgrade to WM6 lock phone again?
Greetings to All and Thank God For this Forum
I successfully unlocked my Cingular 8525 >year ago. I am still running WM5. I would like to use a micro sd card greater than the 2Gb now installed and believe that is possible with WM6 OS. I'm concerned that I not lock my phone if I upgrade with AT&T's download of WM6. TIA-
docwollf, not sure posting in here will get you very far, try posting in the main forum...
ultramag69, thanks for your suggestion about the PDAviet and PDA corner roms, I tried both, and still my phone doesn't want to work.... Do you think that flashing an "official" rom might help? There has been some mention on here that if your phone starts to become unstable then flashing an official ROM may help, do you think it might help me?
Does anyone have any idea at all why my phone might not ring when it's in standby? Its starting to become intensely annoying to be honest....
Trinityj5.
Try flashing the official rom first, then flash your phone with hardspl, then try the new rom. That may work, but it almost sounds like you have a hardware issue.
Thanks for your reply backspacepc,
When I said to install an official ROM, I meant one like the at&t one or the dopod aisa one, I don't have a WM6 ROM for vodafone, they never released one... would going back to the Voda WM5, then hard spl, then a WM6 ROM help do you think?
I am thinking the same as you about hardware... is there a firmware upgrade at all? I have tried over 10 different ROM's now, some WM6 some WM6.1, still no improvement on the ring delay....
If I hadn't have voided the warranty by flashing etc, I would be sending it back....
Any help is hugely appreciated, as you can probably tell, getting quite exasperated with it now...
Trinityj5.
If you downgrade the SPL back to stock and the original os back to stock then you can take it back under warranty. There are instructions in the wiki on how to do this. I believe you may ALREADY have Hard SPL on your Hermes (to check go to bootloader - hold power, OK button above flywheel and reset with stylus, hold in untilyou get to the tri-colour screen. If your SPL is 2.10 olipro, its Hard SPLed) which means you're gonna have to downgrade the SPL. Unless you supercid your Hermes.
You can find the downgrade instructions, I believe, in mr Vanx's tutorials...
Cheers...
Thanks for your reply ultramag,
I do indeed already have Hard SPL on my hermes, I put it there...
I have been looking at downgrading back to stock and then seeing if I can get it replaced, I find it unlikely that voda will even consider it to be honest... HTC might though...
Is there a hardware upgrade that I can try out at all?
Cheers,
Trinityj5
If you open it then you will DEFINATELY void warranty... If you still are within the warranty period its better to send in for repairs than to fiddle yourself.
There are manuals floating around (HTC service manual) that tells you how to take apart and put your Hermes back together, just do a search. Or if you want try Mike Channon's webpage, found at the bottom of his posts. However, if you still have warranty, thats the best way to go...
Cheers...
Sorry! I didn't mean hardware upgrade, I meant firmware....
Are there any firmware upgrades around? It strikes me that the phone doesn't know how to handle a call when it is coming in, so it just ignores it... A firmware issue?
Cheers, sorry again for the mix up!
tj5
1st thing I'd do is to check all my settings. Both phone and volume. Maybe, if you back up and restore the same settings, you've backed it up for silent or vibrate only.
I know that when a call comes through that its slower to wake up from standby when it also has to access the sd card for an MP3 ringtone....
Check out, with Schapps advanced config, how long it takes the battery & AC to resume from timeout. I set mine to about 10 secs.
Also, you should check how much time it takes before call forwarding kicks in. Go to settings>personal>Phone>services>call forwarding. You can set it to a maximum of 30 secs.
These may or may not help, I'm just throwing ideas out.
Hope they help...
Well I didn't back up my settings, it was a brand new phone when I started so I didn't have any settings to restore.
I have mine set to 10 secs too...
My call forwarding is also set to 30 secs...
Thanks for all your suggestions, I think I might downgrade everything back to stock and see what happens from there...
I'm still wondering what exactly is going wrong in my device... It must be some kind of programming setting that has been set wrong... utterly bizzare... can anyone offer any advice to this end?
tj5
Related
Having major problems with my XDA II i....any help gratefully received!! I have tried to find similar postings but without much luck...there is lots of talk of ROM upgrades etc etc but no mention of my particular issue.
I must state at this point I am a newbie in terms of ROM upgrades or whatever....but I am desperate to fix this issue as I am left with a dead phone...and sure someone at work can help me if the technology beats me!!!!
At least once a day it will crash and not respond to trying to power up from the on switch. It will only respond to a soft reset. This is intermittent and does not happen after a certain time span, time of day, after x hours in standby or anything.
I am met with a blank screen etc etc BUT the green light on the right hand side keeps flashing when the phone is 'dead'. It also seems to still be connected to the cellular network because if I dial my number from a landline I get a tone on the landline but the handset is dead. Also the
The only time that it started to behave better was when I disabled the Auto Standby function...I killed my battery but the phone seemed to behave much better because it wasn't going into standby from which it seems to not recover.
This is the second handset I have had from O2, the other one failed for the same reason so there is a 'bigger' problem somewhere...therefore I would rather look to you guys for help as opposed to getting the usual run-around from O2 who don't really seem to want to engage in this at a detailed level. I don't really want to give them the handset for another two weeks just to get another one with the same fault on it again.....
I have no other software installed other than the base OS and it still happens.
Details are as follows:
ROM 1.10.00 WWE
Rom date 12/24/04
Radio 1.00.00
Protocol 1337.39
ExtROM 1.10.124 WWE
Model PH10C
THANKS LOADS!!!!!!!!!!
Stef
My FP, but I have been reading here a lot for the past week or so.
I am a Linux user... so I know a bit about what I'm doing. However, these phones are a different animal that I am not too familiar with.
I recently flashed my 15 day old 8125 with the Xplore 1.1 WM6 rom. Works great, but only one problem, sometimes when It goes to "sleep" it will not intercept a call one out of 5 times. If I wake it during that call, the indicator will pick up that it is ringing at the top, but will not intercept the call, and lock the phone up. It will fail to display some notifications as well... And the time doesn't sync to cingular. Im not on edge, I use the wifi for internet since my town is covered with APs. No, no apps are running on the phone during the call interception problems.
The ONLY progs im running on the phone are winrar, and wififofum2.
I Suspect that activesync may be causing the problems, because it.... runs
for no reason sometimes even after being turned off.
I have flashed the phone back to factory just to test this and see if it is in fact Xplore 1.1.
I want a WM6 rom, and I like Xplore, and appreciate the work done on it, but would like some help. I can't stand WM5. The tool bars are too plain, and old looking, and the stock HTC rom is a RAM hog.
Thanks.
OryHara said:
My FP, but I have been reading here a lot for the past week or so.
I am a Linux user... so I know a bit about what I'm doing. However, these phones are a different animal that I am not too familiar with.
I recently flashed my 15 day old 8125 with the Xplore 1.1 WM6 rom. Works great, but only one problem, sometimes when It goes to "sleep" it will not intercept a call one out of 5 times. If I wake it during that call, the indicator will pick up that it is ringing at the top, but will not intercept the call, and lock the phone up. It will fail to display some notifications as well... And the time doesn't sync to cingular. Im not on edge, I use the wifi for internet since my town is covered with APs. No, no apps are running on the phone during the call interception problems.
The ONLY progs im running on the phone are winrar, and wififofum2.
I Suspect that activesync may be causing the problems, because it.... runs
for no reason sometimes even after being turned off.
I have flashed the phone back to factory just to test this and see if it is in fact Xplore 1.1.
I want a WM6 rom, and I like Xplore, and appreciate the work done on it, but would like some help. I can't stand WM5. The tool bars are too plain, and old looking, and the stock HTC rom is a RAM hog.
Thanks.
Click to expand...
Click to collapse
Why don't you post problems with my rom on my thread? It's your right.
I am not familiar with this bug, post it again in the Xplore 1.1 thread and see if somebody else has it.
Also, when you say that your phone has problems, provide the ipl/spl G3/G4 ...and other info you think it may be helpfull.
Hi I'm a bit of a N00b about pdas
sorry if im asking a dumb question, but will Xplore 1.1 work on my WM5 dell AXIM X51v? and is this a wm6 update or just a wm6 addon (do u need wm6 preinstalled?) Also will this work with most wm5 programs??
potentpoison said:
sorry if im asking a dumb question, but will Xplore 1.1 work on my WM5 dell AXIM X51v? and is this a wm6 update or just a wm6 addon (do u need wm6 preinstalled?) Also will this work with most wm5 programs??
Click to expand...
Click to collapse
You maked me laugh, sorry.
NO, it doesn't work for other device than HTC Wizard ... you have a Dell X51V
But I'm impressed that one Dell user is wanting my rom
This is not even a dell Forum ... how did you get here ?
has anyone come across the problem that when you move to say 3g from gsm or back or you loose signal as your in a bad signal area and then get it back, the phone actually looses the radio says "operation failed" and relocks on to the signal?
mine will sometimes loose the signal need restarting and on the boot screen will show NOGSM when its clearly installed as it worked 20seconds ago. i have tried many types of radio rangeing from 1.07 to 1.41 and all their varients. i am at a loss why my phone just looses it and then forgets it has actually lost it untill i try to make a call or send an sms. no calls or sms's can be received by me whilst the phones done this and it does it a hell of a lot.
sometimes it also just looses the radio half way through a call or data call.
anyone got any ideas?
i have a m3100
IPL 1.04
bootloader 2.10oli
and the XDA live OS installed. however it does it on any OS i have tried so far. and thats alot of them.
Same for me.
Same problem for me.
Often I get the message "operation failed" or "the phone is not ready, wait 15 seconds and try again". Thought it was a problem with the new 1.38 radio, but it seems to be something different.
i also get all those error msg's. i have no idea how to fix it either and no 1 here seems to have a clue either :-(
i Had the same problem with mine it due to hardware i guess. Your phone might have fell down or something then this kind of problem starts I fixed mine by opening my phone up and fixed the arial part properly
torrentulla
is there a guide you follow for that or can you give me any tips to do it myself?
thanks
Smith2001 said:
torrentulla
is there a guide you follow for that or can you give me any tips to do it myself?
thanks
Click to expand...
Click to collapse
I fixed my phone almost the same way as Torrentulla did. I'm my case it seems that something was damaged when I dropped my phone a few weeks back. I discovered that when I pushed at a spot right below the flashlight that the radio kept coming up all the time.
These are the steps I took to repair:
Remove all 4 screws (very small torx) at the back of your hermes
Remove back
Put a little piece of paper on the "pressure" spot
Put your phone back together
Turn it on and enjoy!
I hope you'll manage to fix yours aswell!
Phone sometimes shows No GSM, fails to ring
Hey guys, I posted this in the dead hermes thread, but decided to post it here as it's not really bricked. I think it may be a faulty component or something.
My phone was working fine this morning, then in the afternoon I noticed I would have to try to make a call 3 or 4 times before it would go through, it kept on giving me the error (Can't connect, or something along those lines).
Then, I checked my voicemail and found that I had 10 messages from people who had been trying to get in touch with me, but my phone hadn't been ringing.
The kicker came when I soft reset my phone and all of a sudden No GSM popped up! I soft reset it again, and it was gone, and worked fine for a couple of hours. Now its back to not ringing again.
I flashed radio 1.41.00.10 about a week ago, and have been running fine with no problems since. I haven't flashed any rom's in the past week, and this problem just started yesterday. No new software has been installed (except Pimp my black v0.1).
I don't know a lot about the radio, but I didn't think it could become corrupted during regular use, I thought you could only mess it up when you were flashing the phone. I wonder if there is something wrong with the radio? Could the hardware be faulty? This phone is about 8 months old and hasn't had any problems up to this date.
I'm going to flash radio 1.40.10.0 again and see if that makes a difference, but I'd like to know if anyone has any ideas as to what could be causing this.
Sorry this post was so long,
Thanks
-Kai
it seems i don't have a pressure point on mine as the radio is working as and when it likes. which is not alot
gotta sort it out somehow, will take it apart and see if theres anything obvious.
I have the same problem too, phone sometimes shows NO GSM on startup and sometimes it works. Here's where I posted : http://forum.xda-developers.com/showthread.php?t=306073
Now its not even showing NO GSM it just says: NONE, NONE
Also, I noticed that it will only last about 6 hours on a full charge before the battery is absolutely dead.
I'm beginning to think that it may be my radio 1.41.00.10
It seems strange that all of these people are suddenly having this problem now.
Whats the warranty like on these devices? Is it a 1 years parts and defects warranty? Or is it some ****ty 90 day warranty?
As it is my phone is a piece of garbage, not worth using at all, I am very disapointed in it.
It's a hardware problem.
Hi guys,
I'm experiencing the same problems since two months and I've been struggling with all kind of OS, ROM, RADIO and bootloader, without even gettin close to solve them.
My phone randomly loads the RADIO (otherwise I get the "No Gsm" message), even when loaded, the connection is not suitable and my phone is often unreachable on the net. The battery life is very short because the phone always looses the signal and then seraches till he find it, before loosing it again.
So I disassembled my phone and did a lot of testing with hardware connections. I have found that the motherboard connection with the flash/scroll module isn't stable at all. You can easily move it and find that this affects the phone ability to load the RADIO. It seem strange but it's true. I can't solve the problem and I'm very upset with HTC because of their hardware components lack of quality. I would like to try to change the module to but I can't find a place where i can buy HTC hardware parts.
So I'm going to change my pda, I'll never buy HTC anymore.
Any help?
Has anyone figured out the problem? If it is hardware, what "pressure" spot is it? I tried, but wondered if I'm not in the right place.
In my case it was a spot right below the flash/scroll-part. As said earlier, i put a piece of paper on the spot and reassembled the phone. It still works excellent after a week!
My dopod can't connect to the mobile network as well, but only with the 3 network. It seems fine when being connected to an Optus network. Have you guys tried using a different network simcard?
I'm not sure if mine is a physical problem but maybe a setting which i need to configure so i can connect to a 3 network. Help anyone?
ROM version : Pro BLACK 3.0
ROM date : 01/04/07
Radio version : 1.41.00.10
mine also works just under the flash with the cover off, but if i hold it too hard then the screen goes all white and doesn't work, until i can get the case off its a hit and miss game at the moment.
thanks very much for the tips and help
Dan
Larrys said:
.....
So I'm going to change my pda, I'll never buy HTC anymore.
Click to expand...
Click to collapse
I cannot agree with this more.
I am sick to death of this phone. I had one of the first in the country for normal sales and spent weeks arguing with HTC who flatly denied the screen alignment issue. EVENTUALLY I got them to fix this after referencing posts in this forum.
I continued to suffer the "coma" software issue - why is it so F*((&&^ dificult for a device to wake up when its auto-sleeped?
And finaly, to top it off, I have been suffering this problem. I cannot express how mad I am. Did I buy a cheap phone? NO. I have had nothing but problems with this phone and will NOT buy another HTC.
Oh and if anyone knows how to repair a failed Radio upgrade, please help me! I don't have any choice but to use it until the IMate Ultimates come out.
Due to seeing this radio problem I thought I would try downgrading the radio from 1.4.summint or other (the latest) to a slightly older version. This was of course before I saw this thread. During the downgrade the installer stopped at 15%. Now no matter what I do it sits at the IPL/SPL screen (3 colour bars+white). I have done the obvious i.e. follow the installers error procedure (remove the battery).
Device: HERM200
IPL-1.04
SPL-2.10.Olipro
Please help me be able to use this for another month or two at most - i hope!
Thanks guys
update:
OK Guys
thanks to this thread: http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
I now have it trying to boot the o/s. I get the message "No GSM" on the boot screen but when it boots up it asks me for my pin number and freezes. I guess its locking up because it has no "phone" part? According to the instructions in the other thread I am supposed to flash it again but I can't as the phone locks on boot.....
Any ideas?
*FINALY* got it back into pre-flash feck up situation. Sadly, this still leaves me with the hardware problem. HTC can go poke themselves until the cows come home. Im taking my money somewhere else.
i installed the XDA Windows mobile 6 about 3-4 months ago on my SPV M3100,
everything worked fine untill just lately it started displaying just a plain white screen, not bricked because if i rapped on the power button a few times it would display everything normally?
problem is it has started doing it more and more often untill lately it decided to completely go white - i found out the phone still works just a blank screen? also some of the mounted buttons stopped working at times and would work othertimes?
ive fully charged it, turned it on and plugged it into my pc but im not sure what to do?
is it something to do with XDA, maybe some kind of virus or should i literally re-install the orange windows mobile 5 and send it back?
any help would be great! - im in a bit of a pickle here
thanks -Edd
wm6 spv m3100 white screen
hi there
if anyone is following this thread, i too upgraded first to 4.01 as good as gold, then to 4.30, Schaps ROM's. all fine but then the white screens started in 4.3, in the end about 10-14 days i had to remove the battery to boot the unit, and only thrn with PSU/USB plugged in, so power issue?
anyway i pushed thorugh to 4.31 alls currently well, keep you posted
cheers in all others senses great work all round
cheers pete
Yep, I've got this issue with my HTC Hermes but it only manifested itself after the upgrade to WM6?!
Can you ALL please tell us what bootloader you are running?
I followed the online instructions for getting Schaps WM6 ROM on board for my SPV. I shall dig them out.
mrvanx said:
Can you ALL please tell us what bootloader you are running?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=352857
Hi Folks
My Hermes/Tytn is an Orange M3100. Recently it has begun dropping calls, or rather, ignoring them. The caller could hear a ringing tone but the phone wouldn't switch on, show me an incomming call or anything. A short while later, usually after I'd switched it on (I mean, the screen, "off" is that it's on standby) I'd get the notification of a missed call. More often than not it would come through after I had made a call.
This reached a "point" on the weekend where I missed about 17 calls from the Agency to get work for me as I was the only one available
So. I upgraded as reccomended on here. Up to HardSPL 2.10, Radio version 1.41 and then upgraded to Schaps 4.22 WM6 Rom.
Now, I made sure that ActiveSync has connected and synchronised, and all my contacts and PIM info is in Outlook. However, A/S won't transmit the information to the PDA, even though it tells me it's synchronising.
The only way I have managed to get my PIM data/address book back onto the PDA was by running a custom SPB backup file to restore the calender, sms and phonebook.
This is where the fun starts. My PIM and Tasks then go "read only" merely by having a warning telling me I have no memory and to go and close other programs down. But there isn't anything else running!
Fine. Right. Ok. Obviously I've done something wrong. I did a hard reset this evening. It wiped all the data internally and reset it. I changed the details to match the username that was already stored in A/S and plugged it in.
It tells me "Connecting" and the green thing swirls around but doesn't actually do anything.
I have heard mention of the MTTY software, so I've got that here. But it won't allow me to connect on USB, only Com1, 2 or 3.
So I've a pretty useless phone at the moment. It's got none of my files on there, the satnav is rendered useless merely because I can't install the sod and all the other problems to go with it.
Short of screaming abuse at it and throwing it across the room I'm a bit stuffed. And I can't spend anymore time on it as I've got to be getting up for work at 4am (only finished tonight at 8pm ) for another full day
I've read the wiki, I've gone through the pages and pages and, er, pages of posts but I'm hitting a brick wall somewhere. I'm not as bright as you guys, but I get by.
TIA. Elwyn
Click to expand...
Click to collapse
The device is no longer worthwhile for me and have spoken to Mike Channon over it. If you can change that or help me change it I would be grateful
Mikechannon is the main man when it comes to the hardware side of things, if it was an early bootloader issue (related to bad NAND blocks) then thats what i was questioning your SPL version about.
If mike is confident it is the hardware problem then id take his word for it, the guy rocks
/me has to get his mikechannon ass kissing back into shape again hehe.
mrvanx said:
Mikechannon is the main man when it comes to the hardware side of things, if it was an early bootloader issue (related to bad NAND blocks) then thats what i was questioning your SPL version about.
If mike is confident it is the hardware problem then id take his word for it, the guy rocks
/me has to get his mikechannon ass kissing back into shape again hehe.
Click to expand...
Click to collapse
Not entirely sure what it is yet. If WM6 wrote to the 'wrong' part of the memory, would reflashing back to WM5 fix this?! Is there a way of repairing NAND issues?
MrVanx, I looked in the original thread that I posted in about this issue and followed you're link. Not sure whether I did or didn't at the time, but I can see there are instructions for downgrading the ROM from 6 to 5. However I am now in the situation that I can't use the USB cable as it causes it to white screen, but probably could if I did it via memory card....
white screen continued
hi there
sorry about lack of info i installed olipro 1.4 as per the instructions at the wiki i think. mine doesnt boot white, it turns white/fades to white when in use, or more commoinly i will press off after use, then later turn the unit on, and it will come white. first few times it si normal after 2nd on/off, then it stops completly requiring a hard boot, then that stops and it requires a battery off, then that stops. however it always seems to repsond when power connected, even if 100% charged or just off.
it feels to me like a power issue, still there in 4.31, wasnt there in 4.01, going back now to see if its hardware.
i will give as much info as you guys need, i got my phone from orange in may 2007
pete
white screen update
hello again
still on 4.31 activesync isnt playing at teh moment but anyway.
on the screen thing, if i leave the unit standby itself and then power back on it seems fine, so far 3 hours of good, no white screens.
thanks pete
hi there i face this problem with my imate jasjam sorry to tell you that but this problem is a hardware problem you be confirm that it hardware by push by your 2 fingers below the screen and above the keys like you catch"hold" something bush the power key again the white screen will be disappear .sorry if you don't understand me because of my English.
Hi everybody.
Anybody solved problem with white screen?
I have the same truble as EddTQ - White blank screen & also some of the mounted buttons stopped working rarely 2 week before white blank.
same problem here.
Maybe a radio problem?
Folks,
The problem you are describing sounds like the flex connector.
http://forum.xda-developers.com/showthread.php?t=321163&highlight=white+screen
This thread should give you some details. I had the same problem but phoned Orange who sent me out a new one in 9 hours!
exactly
What happes is exactly the problem explained by alkizmo ...
thanks.
I have had problems with my HTC HD2 for a couple of weeks with things like the home button not working, the screen going to landscape all the time even without turning it side on, when I am making calls the speaker turns it self on and goes into landscape too. I have upgrade the o2 rom from HTC to 1.72.206.3 (86372) WWE and that fixed the problem for 2 days now its returned to doing whatever it likes. Please help as I love the phone but its driving me mad.
'stuck in car kit mode', , , hardware fault, the usb port is shot, save yourself weeks of trying to fix it and just send it for repair.
http://forum.xda-developers.com/showthread.php?t=619859
on the plus side, o2 replaced my screen too, and its much better than the screen it shipped with.
Would it worth doing a hardware reset 1st before sending it back?
only from the point of view of not sending them your contacts and data, , they will flash the latest rom anyway.
The big danger is if you have hspl installed, in which case you MUST remove it, else they will refuse to fix it.
Oh and if you have unlocked the network, you will need to get a new unlock code, cos the IMEI will change when they change the mo. board, and it will be locked again.
Great thanks will get it sorted out this weekend then. HTC said they would look at it to. Which is the best option. I dont know what hspl is so I dont think I have it on the phone
ahh well you would know if you had hspl'd.
O2 were fine for me, gave me a freepost address to use, and i got it back 6 days after posting.