Hi everybody!
Is there a way to make a xml script, a .reg or anything else that coul'd autoconfigure the GPRS connection parameters, and an email account after an hard reset.
Please, answer me, because i've to configure 25 XDA 2!!!
Thanks... :?:
Club i-Mate has a whole raft of configurations for GPRS and MMS in cab format. Its a start...
http://www.clubimate.com/index.asp
Related
Hi!
I have a big Problem to connect via GPRS on my Homeprovider www.telering.at .
On the ServiceLine they told me there is no way do make it working !!!
Because the APN Connection needs some spezial Dial-Up Codes ( +CGDCONT=1,"IP","web" ) which normal mobiles send befor connect!
THE Qtek2020 not .
PS.: here the http settings for telering http://handyhilfe.telering.at/Content.Node/my-telering/handykonfig_http.pdf
may somebody can help me to change the radio rom or anything else !???
Thanks alot
I dont want to sell my mda because the GPRS is not working.
Steve
Hallo!
Have nobody the same Poblemms?
Steve
Both GPRS WEB and GPRS WAP works well on my MDA II
Had some problems with GPRS and MDA I, but with the MDA II everything is OK.
You must unlock GPRS WEB (Hotline or Homepage http://www.telering.at/Content.Node/my-telering/2836.php)
Without that only GPRS WAP works.
Greetings from Styria
Christian
Hi all,
I have just upgraded my xdaII to the 2003se edition with no probs. I’ve also installed the Network setting cab from http://forum.xda-developers.com/viewtopic.php?t=13498&highlight=o2+gprs+settings
Now my O2 mms send and receive doesn’t work. I can connect to wap gprs and web gprs but my mms messages download or send?
I’ve now re-installed the network cab 5 times and tried a few different settings from various sites but no luck. And for some reason the o2 site won’t let me have them either?
Any clues? Or is there another cab file somewhere in this huge forum that I can’t see?
Ok..... thanks for looking those who did. :shock:
I found the solution in the end. the original o2 mms cab file from the link above was missing the server address info so after more trawling through this gold mine of information i found this file http://forum.xda-developers.com/viewtopic.php?t=16826&highlight=o2+server+settings which has that info and works a treat!
hi all,
have upgraded to the latest WM2005 version G
and i dont seem to able to connect GPRS when i try to log onto pocket MSN or internet explorer.
and currently, i am seeing an Icon G on top of the toolbar (just next to the clock)
i dont have this issue whne using WM2003SE, as it auto create GPRS connection, where else, WM2005 does not
any advise ?
keithhiap said:
hi all,
have upgraded to the latest WM2005 version G
and i dont seem to able to connect GPRS when i try to log onto pocket MSN or internet explorer.
and currently, i am seeing an Icon G on top of the toolbar (just next to the clock)
i dont have this issue whne using WM2003SE, as it auto create GPRS connection, where else, WM2005 does not
any advise ?
Click to expand...
Click to collapse
So u are useing now WM2005 on your magician ? How did you do it ? Could you post the upgrade or how your did it.
THX
Maybe he post to wrong forum.
Ops
Can moderator helps me move this thread to Himalaya upgrading
sorry for misleading, cause i was reading a thread and click post new
It does show he has an XDAII on the post, anyway...
I have no trouble with GPRS, other than O2 themselves.
It connects when I access the net, it all works fine.
Did you setup the GPRS connection properly after the upgrade?
pardon me for the configuration, i have no idea how to configure , as some information needs to get from ISP
when i was using WM2003SE, all configuration is automatically installed
so am i suppose to call up my ISP for Information
Call up your GPRS provider that is your cell connection provider.
And ask them for the following details. DO NOT Tell them you have WM 2005. Firstly you're not supposed to have it and secondly they wont know what the **** that is.
Ask for
Access Point Name
Proxies(if they use)
And BTW which operater do u use.
I am from Singapore
My ISP is StarHub
you have their information ?
Call the and ask.....
Can anybody here give me the mms settings for smart network?
tnx in advance
As far as I know the Wallaby doesn't support MMS, but I could be wrong or you could find some third party software to support it, but out of the box it doesn't.
Regards,
Neil.
evan_gerard said:
Can anybody here give me the mms settings for smart network?
tnx in advance
Click to expand...
Click to collapse
Hi evan_gerard,
Let me know if you already got your mms working on your wallaby. I have mine working using EZWAP and manually configuring Smart's IP address. I'll post the settings here if you need them. Happy new year!
morph751 said:
evan_gerard said:
Can anybody here give me the mms settings for smart network?
tnx in advance
Click to expand...
Click to collapse
Hi evan_gerard,
Let me know if you already got your mms working on your wallaby. I have mine working using EZWAP and manually configuring Smart's IP address. I'll post the settings here if you need them. Happy new year!
Click to expand...
Click to collapse
YES MORPH751 pls do help me with the settings, and where can I get ezwap, tnx in a million
Get EZWAP here:
http://www.ccsleeds.co.uk/stuff/ezwap25xda.zip
Thanks to Pete K for the link.
Download and install EZWAP to your wallaby. You need to configure the settings first before MMS and GPRS could work.
As for the settings I'll post them here tomorrow, I documented the procedure and settings (after trial and error) but it's in my home PC. Hope it works for you.
tnx a lot
MMS / GPRS Settings for Smart Network via EZWAP 2.5
Set up GPRS:
1. Start> Settings> Connections> Connections
2. Modify "Internet Settings"
3. Click "New":
Enter a name for the connection: SMART GPRS
Select a modem: Cellular Line (GPRS)
Baud Rate: 19200
4. Click "Advanced":
TCP/IP Settings:
Use server assigned IP address
Enable Use software compression
Enable Use IP Header Compression
Name Servers:
Click "Use server specific address"
DNS: 202.57.96.3
Alt DNS: 202.57.96.4
WINS/Alt WINS: 0.0.0.0
5. Click "OK"; "Next"> SMART GPRS
Access Point Name: Internet
6. Finish
7. Dialling Locations> Connections:
Location: Mobile
Enable Tone Dialling
Area Code: 02
Country Code: 63
8. Click "OK"; End
Set up MMS via EZWAP:
1. Open EZWAPv2> Tools> Options
2. General> Connection: SMART GPRS; Connect Automatically
3. Connection> Connection Type:
Gateway: Enabled
Address: 10.102.61.46
Port: 9201
Disabled: Connectionless Gateway; WTLS secured connection
Timeouts: Default
4. Push:
Enable Push
Connection Type: Address: Blank; Port: 2948
Enable Connectionless Push Gateway
Disable WTLS Secured Connection
5. MMS: MMS Settings:
Message Server: http://10.102.61.238:8002
Sender Address Type: Phone Number
Sender Address: +63920nnnnnnn (enter your phone number
here)
6. MMS Options:
MMS Message Options:
Message Expiry: Max
Enable All
7. Save; End
Good luck!
mms gprs settings
tnx in a million morph751, anyway do you have one for globe?my friend is asking bout it also, tnx in advance
Re: mms gprs settings
evan_gerard said:
tnx in a million morph751, anyway do you have one for globe?my friend is asking bout it also, tnx in advance
Click to expand...
Click to collapse
I think it's the same procedure for Globe. You just need to get Globe's IP address and DNS server addresses. Unfortunately, I don't have Globe's settings. You can probably inquire in Globe centers or it may be available at their website. Hope you enjoy your MMS!
just go to the ftp site check previous posts.. if you need a copy of the cab files (containing mms settings for both smart and globe.. pati sun) just post yer email address and i'll send them to ya.. the wallaby can send and receive mms.. you just need to download the right cab files... im using arcsoft mms composer version 1.6.0.14 and it works perfectly... :wink:
just go to the ftp site check previous posts.. if you need a copy of the cab files (containing mms settings for both smart and globe.. pati sun) just post yer email address and i'll send them to ya.. the wallaby can send and receive mms.. you just need to download the right cab files... im using arcsoft mms composer version 1.6.0.14 and it works perfectly... :wink:
just go to the ftp site check previous posts.. if you need a copy of the cab files (containing mms settings for both smart and globe.. pati sun) just post yer email address and i'll send them to ya.. the wallaby can send and receive mms.. you just need to download the right cab files... im using arcsoft mms composer version 1.6.0.14 and it works perfectly... :wink:
HELP on MMS Diamond
I'm sure since it's all Windows the settings are either the same or similar right?
I have a diamond, and every time i receive a MMS picture i get charged 10 pesos for GPRS internet connection. Called smart, they said Receiving MMS is free and it is my phone that has a problem. They think that the MMS triggers something, a program maybe, that connects to the GPRS every time i receive MMS pictures.
THey said they cannot fix my phone since they do not carry distribute HTC.
What do i do? Any ideas please
I'm using HTC Fuze here in the Philippines. I just used the NetworkWizard.cab I downloaded. Run it, reboot, and everything works.
Hi Senior Member,
Need advice is there any way to add MMS network on Connection option at WM6.
Currently WM5 have it to configure MMS.
Regards,
Yes I just set up an MMS connection my Windows Mobile 6 Star Trek. It will be the same settings you use in WM5, just slightly different menu options.