Can anybody here give me the mms settings for smart network?
tnx in advance
As far as I know the Wallaby doesn't support MMS, but I could be wrong or you could find some third party software to support it, but out of the box it doesn't.
Regards,
Neil.
evan_gerard said:
Can anybody here give me the mms settings for smart network?
tnx in advance
Click to expand...
Click to collapse
Hi evan_gerard,
Let me know if you already got your mms working on your wallaby. I have mine working using EZWAP and manually configuring Smart's IP address. I'll post the settings here if you need them. Happy new year!
morph751 said:
evan_gerard said:
Can anybody here give me the mms settings for smart network?
tnx in advance
Click to expand...
Click to collapse
Hi evan_gerard,
Let me know if you already got your mms working on your wallaby. I have mine working using EZWAP and manually configuring Smart's IP address. I'll post the settings here if you need them. Happy new year!
Click to expand...
Click to collapse
YES MORPH751 pls do help me with the settings, and where can I get ezwap, tnx in a million
Get EZWAP here:
http://www.ccsleeds.co.uk/stuff/ezwap25xda.zip
Thanks to Pete K for the link.
Download and install EZWAP to your wallaby. You need to configure the settings first before MMS and GPRS could work.
As for the settings I'll post them here tomorrow, I documented the procedure and settings (after trial and error) but it's in my home PC. Hope it works for you.
tnx a lot
MMS / GPRS Settings for Smart Network via EZWAP 2.5
Set up GPRS:
1. Start> Settings> Connections> Connections
2. Modify "Internet Settings"
3. Click "New":
Enter a name for the connection: SMART GPRS
Select a modem: Cellular Line (GPRS)
Baud Rate: 19200
4. Click "Advanced":
TCP/IP Settings:
Use server assigned IP address
Enable Use software compression
Enable Use IP Header Compression
Name Servers:
Click "Use server specific address"
DNS: 202.57.96.3
Alt DNS: 202.57.96.4
WINS/Alt WINS: 0.0.0.0
5. Click "OK"; "Next"> SMART GPRS
Access Point Name: Internet
6. Finish
7. Dialling Locations> Connections:
Location: Mobile
Enable Tone Dialling
Area Code: 02
Country Code: 63
8. Click "OK"; End
Set up MMS via EZWAP:
1. Open EZWAPv2> Tools> Options
2. General> Connection: SMART GPRS; Connect Automatically
3. Connection> Connection Type:
Gateway: Enabled
Address: 10.102.61.46
Port: 9201
Disabled: Connectionless Gateway; WTLS secured connection
Timeouts: Default
4. Push:
Enable Push
Connection Type: Address: Blank; Port: 2948
Enable Connectionless Push Gateway
Disable WTLS Secured Connection
5. MMS: MMS Settings:
Message Server: http://10.102.61.238:8002
Sender Address Type: Phone Number
Sender Address: +63920nnnnnnn (enter your phone number
here)
6. MMS Options:
MMS Message Options:
Message Expiry: Max
Enable All
7. Save; End
Good luck!
mms gprs settings
tnx in a million morph751, anyway do you have one for globe?my friend is asking bout it also, tnx in advance
Re: mms gprs settings
evan_gerard said:
tnx in a million morph751, anyway do you have one for globe?my friend is asking bout it also, tnx in advance
Click to expand...
Click to collapse
I think it's the same procedure for Globe. You just need to get Globe's IP address and DNS server addresses. Unfortunately, I don't have Globe's settings. You can probably inquire in Globe centers or it may be available at their website. Hope you enjoy your MMS!
just go to the ftp site check previous posts.. if you need a copy of the cab files (containing mms settings for both smart and globe.. pati sun) just post yer email address and i'll send them to ya.. the wallaby can send and receive mms.. you just need to download the right cab files... im using arcsoft mms composer version 1.6.0.14 and it works perfectly... :wink:
just go to the ftp site check previous posts.. if you need a copy of the cab files (containing mms settings for both smart and globe.. pati sun) just post yer email address and i'll send them to ya.. the wallaby can send and receive mms.. you just need to download the right cab files... im using arcsoft mms composer version 1.6.0.14 and it works perfectly... :wink:
just go to the ftp site check previous posts.. if you need a copy of the cab files (containing mms settings for both smart and globe.. pati sun) just post yer email address and i'll send them to ya.. the wallaby can send and receive mms.. you just need to download the right cab files... im using arcsoft mms composer version 1.6.0.14 and it works perfectly... :wink:
HELP on MMS Diamond
I'm sure since it's all Windows the settings are either the same or similar right?
I have a diamond, and every time i receive a MMS picture i get charged 10 pesos for GPRS internet connection. Called smart, they said Receiving MMS is free and it is my phone that has a problem. They think that the MMS triggers something, a program maybe, that connects to the GPRS every time i receive MMS pictures.
THey said they cannot fix my phone since they do not carry distribute HTC.
What do i do? Any ideas please
I'm using HTC Fuze here in the Philippines. I just used the NetworkWizard.cab I downloaded. Run it, reboot, and everything works.
Related
HI there
i have an problem with my GPRS on XDA 2,
the problem is i can't access internet on my XDA2. i have the following setting
APN: payandgo.o2.co.uk
username: payandgo
password: password
wap field setting in proxy server 193.113.200.195 @ 9201 port
if i open pda.o2.co.uk wesite in IE, it dispaly every thing very fast aprox @ 45KB/Sec
but if i try to open any other site like yahoo, hotmail, google the speed for GPRS drop to 1KB/Sec. and page can't be dispaled message comes up.
I have PAYG O2 SIM card.
i spoke to o2 Customer services to enable my "Enable Web" services but they told me that they can't do it because i am using PAYG .
IS there any other way to get around this problem i mean without going on contarct with O2. and using the same PAYG sim.
Kind Regards
Gugi
Sorry mate there's nothing that can be done as the Mobile Web APN isn't available for PaynGo
bydandie said:
Sorry mate there's nothing that can be done as the Mobile Web APN isn't available for PaynGo
Click to expand...
Click to collapse
hi all ppl
i found this in this forum
OK, full instructions:
* I recommend deleting any existing GPRS settings you have under the work connection settings before entering these to avoid confusion *
1. Go to Start -> Settings -> Connections Tab -> Connections.
2. You'll see 2 sets of option links. 'My ISP' and 'Work'. Under the work links, choose 'Add a new modem connection'.
3. Name for connection: o2 gprs. Modem: Cellular Line (GPRS). Tap Next.
4. Access Point Name: payandgo.o2.co.uk
5. Username: payandgo
6. Password: password
7. Tap Finish.
8. Back in the connections settings screen, tap 'Edit My Proxy Server'.
9. Tick 'This network connects to the Internet' and 'This network uses a proxy server to connect to the Internet'.
10. In the proxy server box enter: 193.113.200.195
11. Tap OK.
12. Back in the connections settings screen, tap the Advanced tab.
13. Tap 'Select Networks'
14. In both drop down boxes choose 'Work' as the connection. Tap OK.
15. Tap OK again.
16. You are now ready to surf o2 pay as you go gprs full internet.
Sorry to be the bearer of bad news; these instructions were great a few weeks ago, but O2, for reasons best known to themselves, have clocked PAYG access to GPRS
hi there
these settings still works for me
i use in my proxy server setting port 8080 instead of 80
regards
Gugi
I've managed to get WAP over GPRS working now - these intructions from O2 are what I followed - except that I first deleted teh existing connection (Right-tap on it and select delete):
Xda II GPRS WAP manual settings Pre-pay
It is not possible to select the 'Prepaid' option within 'My Xda' Connections in the O2 Active UI on the XdaII - 'Postpaid' is selected as default and cannot be changed.
To use the XdaII with an O2 Prepay SIM then the WAP settings will need to be changed manually - note that it will not be necessary to carry out a hard (full) reset in order to complete this.
IMPORTANT - once the WAP settings have been changed, if a hard reset is carried out at some future point, then the settings will automatically be re-configured back to Postpaid and they will need to be manually changed again..
XdaII Manual Setup - GPRS WAP (Prepay)
Tap Start > Settings
Tap 'Connections' tab
Tap 'Connections' icon
Under 'My Work Network' tap 'Manage existing connections'
Tap 'Edit'
The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
Tap 'Next'
Access Point Name: payandgo.o2.co.uk
Tap 'Next'
Usernameayandgo
Password: password
Domain: leave blank
Tap 'Advanced'
On the 'TCP/IP' tab, only 'Use server-assigned IP address' should be selected
Tap the 'Servers' tab
Only 'Use server-assigned addresses' should be selected
Tap 'OK'
Tap 'Finish'
Tap 'Proxy Settings' tab (*Note, the soft keyboard may be hiding this tab - tap the keyboard icon at bottom right to clear this away)
Ensure that 'This network connects to the Internet' box is ticked
Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
Tap 'Advanced'
In the 'WAP' field (Server) enter: 193.113.200.195
In the field to the right of this (Port) enter: 9201
Tap 'OK' and exit
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.
you can still have full internet on o2 p&g, mines working fine
so you can actually use Interent Explorer to reach html pages?
Can you check out your settings and see how they differ from what's in my last post? Then I'll see if I can get this working too...
Just a quick not here. Try changing the http port to 8080 instead of the default 80 (thanks to gugi_sat). All works perfectly for me now Just need MMS now.
Thanks for the help guys
Hi MamaKin
here are the MMS setting for O2 UK PAYG
Start > Messaging > Tools > MMS Settings
Connect Via: My Work Network (this links to the GPRS WAP settings)
Tick Retrieve Messages Immediately
Tick OK to download when roaming
Tick Save sent messages
Attempes before give up: 3
Photo Resolution: Original
Tap the Servers tab
Tap O2UK
Server Name: O2UK
Gateway: 193.113.200.195
Port Number: 9201
Server Address: http://mmsc.mms.o2.co.uk:8002
Sending Size Limitations: 100K
Tap OK twice to exit
gugi_sat said:
hi there
these settings still works for me
i use in my proxy server setting port 8080 instead of 80
regards
Gugi
Click to expand...
Click to collapse
8080 in the WAP port?
or HTTP?
in http
regards
GUGI
does 193.113.200.195 go in HTTP as well as WAP? because my box is empty.
sorry i was in hurry before
ok yeah as in my setting
HTTP: 193.113.200.195 PORT : 8080
WAP: 193.113.200.195 PORT: 9201
SecureWAP : EMPTY
Socks: 193.113.200.195 PORT: 1080
Type : Socks 4 setected
and the rest is same as explained before
hope this will help
Regards
Gugi
It's working now... Thanks.
One other thing (that isn't shown above)
Start > Settings > Connections Tab
Connections icon > Advanced Tab
Select Networks...
In Network Management,
I had to change both boxes to 'My Work Network'
Mine was set to My ISP and didn't work.
Thanks again for your help.
* I recommend deleting any existing GPRS settings you have under the work connection settings before entering these to avoid confusion *
as written above in my post
any way thats good that yr machine works
Regards
Gugi
o2 UK PAYG gprs settings for XDA IIi
Hi all,
I am just wondering if the gprs settings for XDA II works for XDA IIi. I tried it, it's not working for me...Gugi_sat, I need your intelligent brain now plzzzzzz :idea:
Cephas007
There is a God watching over us!!!
hi Cephas
i have only xda2 so i can't help you o this sorry about that, but u can try making a new connection deleting the previous ones (#BUT MAKE SURE YOU TAKE ALL THE BACKUP OR WRITE DOWN ALL THE SETTING BEFORE YOU DO DELETE ANY SETTING)
new connection shold be "work connection".
and follow the instructios explained above.
all the best and very soory thats all i can say ....
Regards
Gugi
Im still a little lost.
My Internet Explorer only works on Work settings, but
My email only works on My ISP settings
Thats it
i am not able to access my email and msn with this connection but i can accessing internet only . I think i mentioned that earlier here or some where in this forum any way good luck with this sort of free connection because i have no credit on my phone and i am using this for month i mean it looks free to me rest i dono.
regards
Gugi
Can any one help me do settings for My Siemens SX-56 Settings for Ufone or Telenor (PAKISTAN) Settings. I have tried to do the settings by accessing the web pages of the said companies but its General Settings and i seem to get lost with the complicated way the settings provided by Ufone.
I also need to know how to send mms which i could not figure out at all.
thx
aamer sheikh
I can help you with the GPRS and MMS settings for Ufone. No clue about telenor.
For GPRS do the following: (I'm assuming your device has WM2003SE)
- Start > Settings
- Select the Connections tab and click on the Connections Icon
- Click on the Advanced Tab
- Click on the Select Networks button
- On the Network Management screen, under the first dropdown list (for
"programs that automatically connect to the internet should connect using",
click the New button.
- On the next screen, enter an ISP name, e.g. UfoneGRPS
- No other settings needed, save these settings and clic on the Tasks Tab
- Now here you will see your UfoneGPRS connection listed with a bunch of
options
- Click on the Add a new modem connection option under UfoneGPRS
- Enter a name for your connection e.g. UfoneInternet
- Select CellularLine)GPRS) in the Select a modem setting, click next
- Enter ufone.plinternet in the Access Point Name box
- Click Next. No further entries needed, click Finish and save settings.
Your connection is now set. Click ok to get all the way back, on the today screen click on the signal strength icon to display the connection bubble. It should display your newly made connection name with a "connect GPRS" lick. Click on it and you should be connected to the Ufone GPRS network in a few seconds.
Good luck. Lemme know how it goes.
p.s. before you can use GPRS and MMS you have to call the customer services at Ufone and ask them to activate both of these services for you. It takes some time for this to happen e.g. you call them today and it will start working perhaps the next day.
For MMS do the following:
Again like the above you have to create a new connection by first creating a connection name and then a new modem connection for it. Lets say you called the connection "UfoneMMS"
These are the settings for that modem connection for UfoneMMS
- Connection Name: Ufone.mms
- AccessPoint: ufone.plmms
- Everything else: default
After this, go to pocket outlook, in the settings, do the following:
Create a Message Server as folows:
Server:
Name: UfoneMsgServer
Gateway: 172.16.13.27
Port: 9201
Address: http://www.ufonemms.com:80/
xxxxxxxx=9999999
(the xxxxxxxx and 99999999 are your MMS account username and mailbox ID that Ufone creates for you and you have to obtain it form their customer services peeps).
Then in the main settings, set the following parameters:
- Connect via: Here you select your connection name e.g. Ufone.mms
- Connect to Server: UfoneMsgServer (the server you just defined)
One last thing, I dont know how important this is but they always say to do it..
In the Slect Networks screen (where you first defined your connection), click on the Dialing Rules buttons and click "use dialing rules". Then setup new Dialing rules for say, Mobile as follows:
Dialing rules: Dialing patterns
Local: G
L.D. : G
Intl.: G
You should be all set up.
I have heard that recenty they changed some MMS related configuration so you might wanna chekc up with them to see if all the above parameters for MMS are still valid. I had them all setup and working perfectly for a while... but I havent used MMS in a long time so I dont know whats been happening recently.
If you have any trouble, lemme know. Everything should work, its working on my machine.
Access point is ufone.plinternet for lahore connections and
ufone.piinternet for islamabad connections and I think it differs from city to city be sure to check with ufone
APN
What is the Access Point Name for Multan?
please help me.
humayunl said:
I can help you with the GPRS and MMS settings for Ufone. No clue about telenor.
Snip, snip.....
If you have any trouble, lemme know. Everything should work, its working on my machine.
Click to expand...
Click to collapse
plz tell me the mms setting for wm6.1
im unable to see the mms folder in wm6.1 like in wm5.0 ??? even cant see server setting for mms in options of messaging
shanalikhan said:
plz tell me the mms setting for wm6.1
im unable to see the mms folder in wm6.1 like in wm5.0 ??? even cant see server setting for mms in options of messaging
Click to expand...
Click to collapse
you should only install this application, you do not have to bother setting up GPRS manually....
humayunl said:
I can help you with the GPRS and MMS settings for Ufone. No clue about telenor.
For GPRS do the following: (I'm assuming your device has WM2003SE)
- Start > Settings
- Select the Connections tab and click on the Connections Icon
- Click on the Advanced Tab
- Click on the Select Networks button
- On the Network Management screen, under the first dropdown list (for
"programs that automatically connect to the internet should connect using",
click the New button.
- On the next screen, enter an ISP name, e.g. UfoneGRPS
- No other settings needed, save these settings and clic on the Tasks Tab
- Now here you will see your UfoneGPRS connection listed with a bunch of
options
- Click on the Add a new modem connection option under UfoneGPRS
- Enter a name for your connection e.g. UfoneInternet
- Select CellularLine)GPRS) in the Select a modem setting, click next
- Enter ufone.plinternet in the Access Point Name box
- Click Next. No further entries needed, click Finish and save settings.
Your connection is now set. Click ok to get all the way back, on the today screen click on the signal strength icon to display the connection bubble. It should display your newly made connection name with a "connect GPRS" lick. Click on it and you should be connected to the Ufone GPRS network in a few seconds.
Good luck. Lemme know how it goes.
p.s. before you can use GPRS and MMS you have to call the customer services at Ufone and ask them to activate both of these services for you. It takes some time for this to happen e.g. you call them today and it will start working perhaps the next day.
For MMS do the following:
Again like the above you have to create a new connection by first creating a connection name and then a new modem connection for it. Lets say you called the connection "UfoneMMS"
These are the settings for that modem connection for UfoneMMS
- Connection Name: Ufone.mms
- AccessPoint: ufone.plmms
- Everything else: default
After this, go to pocket outlook, in the settings, do the following:
Create a Message Server as folows:
Server:
Name: UfoneMsgServer
Gateway: 172.16.13.27
Port: 9201
Address: http://www.ufonemms.com:80/
xxxxxxxx=9999999
(the xxxxxxxx and 99999999 are your MMS account username and mailbox ID that Ufone creates for you and you have to obtain it form their customer services peeps).
Then in the main settings, set the following parameters:
- Connect via: Here you select your connection name e.g. Ufone.mms
- Connect to Server: UfoneMsgServer (the server you just defined)
One last thing, I dont know how important this is but they always say to do it..
In the Slect Networks screen (where you first defined your connection), click on the Dialing Rules buttons and click "use dialing rules". Then setup new Dialing rules for say, Mobile as follows:
Dialing rules: Dialing patterns
Local: G
L.D. : G
Intl.: G
You should be all set up.
I have heard that recenty they changed some MMS related configuration so you might wanna chekc up with them to see if all the above parameters for MMS are still valid. I had them all setup and working perfectly for a while... but I havent used MMS in a long time so I dont know whats been happening recently.
If you have any trouble, lemme know. Everything should work, its working on my machine.
Click to expand...
Click to collapse
AWSUMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
Keep Going with your Advises
its so simple and it works
shanalikhan said:
plz tell me the mms setting for wm6.1
im unable to see the mms folder in wm6.1 like in wm5.0 ??? even cant see server setting for mms in options of messaging
Click to expand...
Click to collapse
Try to Hook with Windows Mobile 6.5 standard or professional
then its simple to proceed
and if no, make a hard reset with your phone to re gain the factory settings and then try
BDW, Which Phone you have...?
Hi
I am in China but I AM NOT chinese. I have been looking for the way to set GPRS and MMS for This phone forever and couldn't find. I notice we have a chinese friend in this forum. anyone could help me?
There indeed is a small app designed especially for this purpose.
Just unpack the files into any folder on your device. Click on DataConnection.exe to open the app, select "remove all" to delete all existing connection configurations, then choose the second item named as "中国移动WAP包月". after all is done, click on cancel to quit. Now ur device is capable of surfing the net and sending/receiving MMS.
Also be sure you have a data connection package, by default the data connection for web browsering via China Mobile is charged at RMB ￥0.03/kb.
settings for China Mobile gprs
Hi,
Also living in China, not Chinese. All you have to do for the China mobile GPRS is change the setting to the following and it works just fine:
1. Go to start>settings>connections>add new connection
2. Call it cmwap, set it as a gprs connection, tap next
3. access point name is CMNET
4. username and password are BOTH "CMNET" all caps
5. leave domain blank
6. tap finish
enjoy
As posted above, do make sure you get a dataplan. They have one for 25RMb a month that includes 200MB of GPRS and 300 text messages.
Thanks you very much both of you very appreciated
China Mobile MMS & GPRS setting for HTC Tytn II
could anybody tell me the China Mobile MMS & GPRS setting for HTC Tytn II. Many thanks.
seems obvious...
af888 said:
could anybody tell me the China Mobile MMS & GPRS setting for HTC Tytn II. Many thanks.
Click to expand...
Click to collapse
I've been using a Cingular 8125 with WM5 in Ningbo then Shanghai for the past 8 months. The wireless internet has never worked perfectly since I moved to Shanghai, but when I returned last week with my TyTN 2 (Tilt) it never works. I used the same standard setup CMNET, not username or password etc. No error messages, just it never connects. Maybe the TyTN2 actually does have specific settings.
首先我们进入数据连接菜单里：开始—设置—数据连接原来装有前他的连接都删掉还有拨号连接和VPN连接里都是空的有的话也统统删掉跟着按：GPRS连接 进入再按菜单—添加
描叙：移动梦网GPRS
名称：移动梦网GPRS
连接到：WAP网络
访问点：CMWAP
用户名：留空不用填
密码：留空不用填
主DNS：留空不用填
辅助DNS：留空不用填
IP地址：留空不用填
填写完后按完成.代理服务器—菜单—添加
之后就可以设置代理服务器连接了
描叙：移动梦网GPRS(名称可以随意)
连接方：WAP网络
连接到：Internet
代理服务器：10.0.0.172:80
类型：HTTP
用户名：留空不用填
密码：留空不用填
填写完后按 完成—[另注:这个是用来上WWW的代理]再添加:描述:wap连接方:WAP网络连接到:安全WAP网络代理服务器:10.0.0.172:9201类型:WAP完成.再按完成.[另注:这个是用来直接上WAP的,直接上WAP是在包月里的,不要再代理]完成退出到连接菜单在数据连接菜单中按：菜单—完成选项在我的桌面连接到：选internet网络—完成Internet连接：移动梦网GPRS
工作连接：自动
WAP连接：移动梦网RS
安全WAP连接：wap连接 最后就是按完成退出--接下来最后一步就是打开Ie按菜单—选项—连接选择自动监测设置处不要打勾....选择网络：Internet或者wap安全网络..现在就能够实现通过cmwap接入上wap网站和www网站了
that`s all
China mbile GPRS MMS Setting.
Deall All,
I am Using i-mtate JasJam, WM6.1
I used GPRS.Zip then choose the second item named as "中国移动WAP包月". , now I can brows internet, but ca not send and recieve MMS.
CHINA Mobile.
Best Regards.
mlalahoi said:
Hi,
Also living in China, not Chinese. All you have to do for the China mobile GPRS is change the setting to the following and it works just fine:
1. Go to start>settings>connections>add new connection
2. Call it cmwap, set it as a gprs connection, tap next
3. access point name is CMNET
4. username and password are BOTH "CMNET" all caps
5. leave domain blank
6. tap finish
enjoy
As posted above, do make sure you get a dataplan. They have one for 25RMb a month that includes 200MB of GPRS and 300 text messages.
Click to expand...
Click to collapse
mlalahoi,
Thanks for the information!
I'm on CM with the 神州行service.
I applied for the RMB20 package & suddenly, my GPRS settings refused to allow me to connect to the internet.
I made changes to the settings & now I'm good to go.
For the record, these are my settings:
Connects to: Internet
AP: CMNET
Username: CMNET
Password: CMNET
IP Address: 10.0.0.172:9201
I need to input the IP address or else I can't find the website I'm browsing to.
Under Connections | Menu | Advanced | Menu | Options, I configured My Desktop connects to: The Internet.
In Connections | Menu | Advanced, I set my Internet Connection to the entry I created for the GPRS connection above & set the others (Work, WAP & Secure WAP) to Automatic.
Finally, in PIE, I set my connections to Internet & uncheck the Automatically detect settings checkbox.
I'm good to go now.
BTW, what type of service are you on? My RMB20 package comes with only 50Mb of data?!
TIA!
Konker
HTC Startrek w/WM6.1 Standard by Erofich
gprs.zip on samsung omnia i900
charlieluo said:
There indeed is a small app designed especially for this purpose.
Just unpack the files into any folder on your device. Click on DataConnection.exe to open the app, select "remove all" to delete all existing connection configurations, then choose the second item named as "中国移动WAP包月". after all is done, click on cancel to quit. Now ur device is capable of surfing the net and sending/receiving MMS.
Also be sure you have a data connection package, by default the data connection for web browsering via China Mobile is charged at RMB ￥0.03/kb.
Click to expand...
Click to collapse
Hi, I got the zipped files onto my Samsung i900 but when i click on "Remove All" it says it did it but I still have modem connections in "Connections". Then, when i select on the WAP option between chinese characters it says "Fail to XML load file." any suggestions?
Thanks!
How to setting wap/gprs and acces internet
Hi I'm,
I'm buy bellwave N81i but couldn't set-up wap/gprs and accessing internet. Anybody can help me? I'm live in Indonesia
thanks
MMS and GPRS setting for the Samsung i900
Hello every one does any one know how to apply the setting for gprs and mms for the i900 samsung
I finally resolved this after a long time. First you have to set up the connection to go to "cmwap", not "cmnet" and configure the proxy settings using one of the methods above. Then you need to configure the MMS mailbox. Open Messaging and choose Tools->Options from the menu. On the list of mailboxes, click on MMS. This opens the configuration. Click the Servers tab and then the New button. Server name is whatever you want, Gateway is 10.0.0.172 (same as proxy), port is 9201 (WAP), Server Address is http://mmmc.monternet.com. The "Connect via" should be the one you already created, then change the WAP version to 1.2. Save this and then on the next screen click on the new name and click on the "Set as Default" button.
Things should now work fine.
Hi i'm expatriate in china and i have a spv c600 from orange, can i use this cellphone for GPRS and MMS if yes how can i setup it ?
Thanks in advance for your help
hey there,your info was very helpfull...i was wondering if you could help with some other issues..i got an htc diamond a month ago and i love it.. but thing is i live in china and i cant find the right pinyin input for my phone...monster chinese and cect are no help.. please assist
another problem is that i have downloaded many games on the phone but most of them wont play..the loading screen comes on and then the screen just goes back to the games folder..please assist..
need help to set GPRS(China Mobile) on P1i
hello guyz , anyone knows to set GPRS on P1i ??
how to make a new internet account for China Mobile ^^
my service is 5 yuan / month ^^
thank you for your answer ^^
Help me plzz
hey friends,
im from pakistan but using china handset, any body can tell me how i set my mms setting in my handset ? waitting for ur reply thanks
oaktree6 said:
Hi, I got the zipped files onto my Samsung i900 but when i click on "Remove All" it says it did it but I still have modem connections in "Connections". Then, when i select on the WAP option between chinese characters it says "Fail to XML load file." any suggestions?
Thanks!
Click to expand...
Click to collapse
Hey Friends,
im from pakistan but im using china handset mobile (sigmatel T99i)... anybody know how i set mms setting in my mobile ? plz tell me im waitting ur reply thanks
Hey guys,
I have an i-Star i-8016b but I cannot find any settings or extra languages for it!
Please Help!!
SOS for blackberry storm
hello guyz I'm in China and i'm using a BB Storm, does anyone know how to set GPRS on blackberry storm?? I'm using China Mobile ^^
my service is 50 yuan / month ^^
thank you for your answer
I am having trouble sending a picture message through MMS. I installed this - http://forum.ppcgeeks.com/showthread.php?t=59412 - Arcsoft MMS. It now allows me to insert the pictures in my message, but when I go to send it it says:
"In order to send/download MM messages, the current active connection may be closed (this may affect other applications in use. Do you want to continue?" so I hit menu > yes.
Then is says:
Message delivery failed. Or Message receipt failed.
I am running NFSFANs Rom 111
anyone that can help?
GatorsUF said:
anyone that can help?
Click to expand...
Click to collapse
who is your carrier what/who's version of arcsoft did u install. did you check your settings?
Service: Alltel which is now Verizon
Version: SPRINT Arcsoft MMS 5.0.70.24. Threading MMS works! (Updated 3-2-09)
Cabs: Sprint Arcsoft MMS 5.0.70.24.cab and Sprint Arcsoft MMS 5.0.70.24-pm.cab
Neither version would work with my service, I have Alltel and the rls says Sprint, so that may be my problem. All I want to do is send picture messages. My phone can do almost anything I want but it can't send a picture message that my old Nokia from 3 years ago could do?
Thnx for the help btw
P.S. another odd bug with that Arcsoft program is when I go to check my emails and hit "Mark All as Read" it opens the Arcsoft settings...wierd...
ok so go to your inbox then press menu/mms options(may say pics and video options)/servers/alltel. if alltel isnt there just click on the default. if alltel is there and not the default-set it to default and delete others. then open the default. here is your settings.
server name: Alltel MMSC
Gateway: mms.alltel.com
port:8080 (try 8080 first if it doesnt work try just 80)
server address: http://mms.alltel.com/servlets/mms
connect via: the internet
send limit: i have mine set 100k currently
if you dont care to use an older arcsoft just install this it should work right from the get go. im pretty sure its calkulins. ive used it 4ever.
any chance you can get this app to work with the TELUS network?
That would be great if it worked for Telus...
Finally got a custom ROM on my phone, NFSFANs, and I must say I really like it, but for some reason I am unable to MMS. I looked through all the places i thought would be obvious settings, but i cant find anything
anyone else experience this?
same issue
i have been haveing the same issue on my touch pro, i dont see were to fix it when i try to send it starts to then says unable to send does any one know of a fix for this, i am useing Energy.HERMAN.23518.StandardM2.5_27.
use this
use this cab, it appears that messaging is still not ready for the new 2011 builds...
This will disable the HTC Messaging and take you back to the winmo messaging.
You also need the second cab to take your phone back to what sense2.1 used and it should work...
There is also a third file attached, that one you install by itself, you have to go to the "all messages" then you have to go to the menu>options>settings and put your settings.
Search on it a little more, If I find the full information again I will let you know. I read on it last night and got my wifes touch pro2 to mms again so this should work for you too...
Maybesz?
I beleive this may be what your after, these settings are carrier specfic in order to get MMS working
HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\MM1 Default Setting Cricket MMS and Change WAP default Port 1&2 to 8080 and WAP Default Time Out to 10000
HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\MM1\MMSCSetting\Cricket MMS Ensure Gateway Port is 8080 ISP is Cricket MMS, MmscURI is set to http://mms.mycricket.com/servlets/mms , Name is Cricket MMS, Ensure the next 4 settings WAP1RecvDefault Size, WAP1Send WAP2 Recv and WAP2 Send are set to 1024000 WAPType to 1 (WAPType to 1 Ensures WAP 2.0)
WspHeader Accept: application/vnd.wap.multipart.related
X-Cricket-MDN this is your 10digit cell number (this might say X-Verizon or X-Sprint Change the value name to X-Cricket-MDN) Value Data 555-555-5555 < of course put in your own phone number no dashes.
Under UI\Domain http://mms.mycricket.com/servlets/mms
Under UI\SizeLimit WAP1RecvLimit 1,2,3 set everything on that page (12 settings in all) 1024000 (this is part of your 1000K send and receive limit)
HKLM /software/arcsoft mms ua/config/UI
find EnableServerEdit and change it from 0 to 1
HKCU\Software\Microsoft\Windows\CurrentVersion\Int ernet Settings Where it says Connections, Delete that entire string Hold down stylus on Connections circle it and delete it, This is what keeps the MMS from sending. Bad thing is every time you open explorer it re-writes this registry. To solve that many of us have just used something else besides Explorer. Like Opera, Firefox Mobile or Skyfire.
You can still use these browsers without writing the Connections Value. If you don’t want to use anything but Explorer, you are going to have to go into this registry file and delete the Connections string every time to send MMS or until someone comes up with a registry hack to Auto delete this value every time you close IE …Close Regedit.
Now go to your messages and click menu/MMS options and then click server and click add new. Add new or if you already have one called something else just click it and click edit...you need to change these settings to
Server Name Cricket
Gateway leave blank
Port Number 8080
Server address http://mms.mycricket.com/servlets/mms
Connect Via Cricket MMS
Sending limit (should be 1024000 if you changed these settings correctly in regedit)
Wap version Wap 2.0 (Wap 2.0 should be pre selected, if it is don’t touch it. If it keeps reverting back to 1.2 when you click close? Go back into regedit and select WapType 1 as mentioned previously, this forces it into WAP 2.0 without it MMS won’t work.) Now if you have more than 1 select the cricket one you just configured and hit set as default then go back to HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\MM1\MMSCSetting\Cricket MMS and delete the other configuration, when you go back into settings CricKet should be the only one there and it should be default.
Start\Settings\Connections\Connections Under the General Tab Enter Cricket. Under the Modem Tab put in Cricket Mobile Web select modem to cellular line. Click next put in #777 to dial to Cricket, click next… User Name: [email protected] Password: cricket Domain: Leave Blank, click finish…under proxy settings, check these 2 boxes (this network connects to the internet, and this network uses a proxy server to connect to the internet) Proxy Server: wap.mycricket.com click advanced. The only thing with a value should be HTTP wap.mycricket.com:8080 the rest blank. Click ok and ok again, this ok should bring you back to the connections screen at the bottom click advanced. Click select networks. Under both drop downs select Cricket. Click Ok Go into Exceptions Click add new URL for each of the following settings you are going to need to click add new url again, these don’t all go under one “Add new URL” Block
*mms.mycricket.com/servlets/mms
*.mms.mycricket.com/servlets/mms
*mycricket.com/
*.mycricket.com/
*.mms.mycricket.com/
*mms.mycricket.com/
Then Soft Reset.
COPIED FROM http://forum.ppcgeeks.com/showthread.php?t=25859
no credit to myself
AHHH!!!! His reply makes better sense for your question then mine.
I bow to you oh gran masta!!!