Hai,
I'm calling for your help because i wanted to upgrade my mda2 with this file: ruu172126wwe_imate.exe
that i just downloaded from this site....
but i got an error and on my screen I can only see the tect Serial v1. 03 and when i put it on my cradle it sais USB v1.03
What can I do..
Please help me :roll:
Hi,
I'm no expert, but I have upgraded my MDA2 sucsessfully. Have you tried to upgrade it when docked in that state?
Or maybe you will have to upgrade using other methods, like through SD card or serial/usb... Please research on this forums for further details.
One thing that I can almost assure you, your MDA2 is not dead! if you see the Serial/USB interface or bootloader then you have a chance to revive it... :wink:
Good luck...
Rayan
Related
Hi all,
i've got a slight problem with my XDA. After updating to WM 2003 (4.00.16) my GSM (3.23) seens to be broken...
It woked for a while and then out of nowhere. My XDA now wont boot. Th good news is that i can go into the bootloader.
What can i do now? Where can i get a good WM2002 image to put onto my SD Card? I'd appreciate any help!!!
Dear Fabi,
I know it might not be the suitable question, but could you plz tell the exact steps you did that led you to this situation. This is to allow you to get precise help, and to be a learned lesson for the rest of us, coz I was about to upgrade from 3.25 to 4.00.16 but prefered to ask first.
Don't worry, the guys here are way clever and I 'm sure you will get the help very soon ... TKR
Nooo problem. I was about to Sync my XDA via USB Cradle and noticed that my backlight was turned off. Also my Phone was searching for a Network (now I know why... :roll: ). So I thought it might be good to reset that thing..... *aghhhrrrr* That was a big mistake. After the reset I saw the boot screen and the backlight blinking twice. That was all. My Bootloader (5.15) says "GSM Error"... now I'm without Mobile Phone for a while :?
so in other words, 4.00.16 was OK but you screwed up the XDA by just doing a reset while the backlight was off ?? ... I 'm afraid I don't get it :?
Fabi said:
Hi all,
i've got a slight problem with my XDA. After updating to WM 2003 (4.00.16) my GSM (3.23) seems to be broken...
It worked for a while and then out of nowhere. My XDA now wont boot. Th good news is that i can go into the bootloader.
What can i do now? Where can i get a good WM2002 image to put onto my SD Card? I'd appreciate any help!!!
Click to expand...
Click to collapse
Confirming you used the SD card method to upgrade, right!
Also what radio band is or was your XDA set to before the upgrade?
HTH
No I didn't use SD Card to update my XDA. I used The ROM-Kitchen to generate a exe and updated over USB cradle.
Im running my MDA (i don't have a XDA ) on a german GSM 1800. Eplus. It was always set to this option and I never even tried to change it.
@biso007:
I screwed my MDA because I did a reset. Thats right. But I had some backlight issues in the past few days after upgrading. The backlight sometimes turned off and there was no chance to get it back on... only a reset. I first thought the proplem occured again yesterday but then i saw that my MDA was looking for network. After resetting the GSM part was dead....!
So back to my problem. I now ordered a SD Card Reader/writer. Is it possible to resore my system via XDArit and a backup? Can someone provide me a working 2002 backup from boot, OS and GSM part? Or can I do this by myself. I really appreciate your help!! Thanks a lot.
Ok I see!
Do this then press the green phone button, tools, Options, Band
and post whats listed.
and yes its possible to restore your system via XDArit and a backup.
As far a the 2002 PPCPE ROM goes you should be able to download it from T-Mobile, so visit their web site and search their MDA upgrade/download section.
HTH
Qman said:
Ok I see!
Do this then press the green phone button, tools, Options, Band
and post whats listed.
HTH
Click to expand...
Click to collapse
My MDA does not boot anymore! I can't get into windows and i can't sync anymore! I have the Radiostack and the 2002 image fram the T-Mobile Website but the image ist a NK.nbf. AFAIK XDArit needs *.nb1 Files? I also noticed that it seems not possible to write the GSM Part to the phone via XDArit.
Hiya Folks
I wonder if you could helpme with a bit of a problem, i have recently attempted to upgrade my XDA using the reccommended downloads from O2, this upgraded my ROM and the GSM part of the XDA. however when trying to get into my XDA it freezes, i can get into the bootloader but get a GSM error, am i able to flash the GSM, if so where can i get the flash and how would i carry this out. i have got into the GSM part of the bootloader and the GSM will not turn on. i have tried copying the GSM from a friends XDA only to find the message "please connect to RS232 and run PC monitor now"
Hope you can help
Cheers guys, you are truly more useful than the folks who we obviously look up to at O2!!!! Mind you this does not say much!!
Thanks again
Dave
where can i find the wm 2003 upgrade file for qtek 1010
where can i find the wm 2003 upgrade file for qtek 1010.
plz can any body reply to me at [email protected]
i want to upgrade my qtek1010 2002 wm to 2003 but could not find it .
can any body reply to me at my email
Hi All, Please please could anyone help me I have just tried to update my xda2 with the o2 update software (latest) and all the screen will display is serial v1.6, I cant do any reset Hard or Soft!! Should I buy a body bad and call the undertaker?
Let it on the craddle and start to update it again!!!
Hi, I tried that and get ERROR 100 Message?
Thanks
sorry, bro !,
but from where you have tried to update software latest from 02??. (website)
thanks
ajong
Hi Yeah from o2 UK.........
Thanks for your reply
still problem bro ???
try this :
- push together (power+navikey+reset)
-put your device in to cradle
-start upgrade again (from original 02 rom)
- wait 2-3 minutes.
hope this helps !!
-------------------
which one version to upgrade !!
1.60.50 ???
@soulexpress: Don't forget to kill activesync before yoy retry the update.
Does the 'serial' change into 'usb' when the device is in the cradle?
Hi
Just had to hard reset my XDA II as it died and wouldnt respond. I have the message above.
If I put it in the cradle, it says ' USB v1.01' if I take it out it says 'serial' other than that I cannot get it to do anything!
HELP!!!!!!!!!!!!!!!!!!!!
thanks
rich
mmm, seems youre in bootloader mode.
Only way out I know of is to reflash the device.
Dont forget to kill activesync before you do that btw
ok - thanks
but i dont understand, if i download the rom to my pc, surely i need activesync connected to transfer the file to the xda?
what do you mean by kill it?
also what version should i download?
sorry for my lack of pc skills1
cheers
rich
The upgrade package takes care of communicating with the device.
Activesync is not used and would only interfere.
To kill it: ctrl-alt-del, then end "wincemanager.exe" (not exactly sure of the name) process.
The rom you should use is preferable one of your current supplier: 02, T-Mobile, Qtek or CDL (iMate).
I would advise a non-beta 1.72 rom
These are officially available for iMate and QTek devices (search on RUU172*).
I created a good (to me!) 1.72 rom for T_Mobile devices, search on RUU172901*
Is it worth upgrading
I am running 1.60.00WWE on my XDAII is there any real advantage of upgrading to 1.72 ? What are the advantages?? If so which should I use? I Swapped over to the TMobile one a while and I believe it is difficult to change back to the O2 version, have you any comments?
Thanks Adam
Is it worth upgrading
I am running 1.60.00WWE on my XDAII is there any real advantage of upgrading to 1.72 ? What are the advantages?? If so which should I use? I Swapped over to the TMobile one a while and I believe it is difficult to change back to the O2 version, have you any comments?
Thanks Adam
£50
Money
£50.00?
What's going on?
you wouldn't get that for your body!!!
??????????????????????
I tried to uprgrade to 2003Se 2.02 and since that my qtek is dead, I think so.
when i try to make a new upgrade from bootloader mode /v1.01. the procedure stops after 99 %
any idea ??
please help me, every body tells that qtek cannot die, I want to see
have you changed the operator settings to qtek? are your language settings the same? e.g. WWE?
please use a fast win XP computer for upgrade.
Hello all, i need some help with mi Qtek 1010, i was trying to downgrade from version 3.04.00 Eng WM2003 SE to version 4.01.16 eng, with a usb cable sync and charge, it´s starts with upgradig but for mi bad luck i receive a message in pc that it was an error to do a softreset in xda, but the only thing i receive in display is upgrading and nothing more, i´ve already try to make the upgrade but now with the cradle and nothing, i´ve already try to copy an rom to sd card with osimage tool start in rescue mode to install from the sd card and do nothing, i´ve no option to flashing from the sd-card!!!!
Please help me, anyone!!!!!!
Forgeret...
I´ve been successful, with some help, residing in this forum, thks guys, i dont know what i could do because of this magnificant site...
thanks to all... :lol:
I tried to do a ROM Upgrade but something went wrong and now the screen on my XDA II just shows the words Serial and v1.06. When I did a hard reset the screen still shows the same thing. When I connect the device using the cradle the word Serial changed to USB, but it didn't seem to connect to the PC. The Activesync was not activated also. When I tried to run the ROM Upgrade again, it shows ERROR 100: MODEL ID ERROR. I tried to run HimaUpgradeUT_noID.exe, it shows Error 103: ROM IMAGE FILE NOT FOUND. Can anyone please help me get my device working again? Thank you in advance.
Wrong ID
a few days ago i had the same problem with my HTC Blue Angel (also known as
qtek 9090)
temporaly youre PDA shows the bootloaderscreen. On top it shows youre kind of connection, on the bottom you can find the revision of this piece of software.
try this tool to reanimate youre pda.
http://rapidshare.com/files/36498840/MaUpgradeUt_noID.rar runterladen.
extract this file into the dir, where you have copied the original ROM-Image from youre developer, put youre PDA into cradle and check, if the status of this connection is changed in USB. Everything o.k? Right now: doubleklick on MAUpgradeUT_NoID and drink a coffee. it takes about 10 Minutes and after this youre pda runs as well. dont forget to copy youre original ROM-Image with the original Installer after finishing this procedure to avoid any errors.
Well, i hope this tutor will help you. i´m interested for.
Wrong ID
a few days ago i had the same problem with my HTC Blue Angel (also known as
qtek 9090)
temporaly youre PDA shows the bootloaderscreen. On top it shows youre kind of connection, on the bottom you can find the revision of this piece of software.
try this tool to reanimate youre pda.
http://rapidshare.com/files/36498840/MaUpgradeUt_noID.rar runterladen.
extract this file into the dir, where you have copied the original ROM-Image from youre developer, put youre PDA into cradle and check, if the status of this connection is changed in USB. Everything o.k? Right now: doubleklick on MAUpgradeUT_NoID and drink a coffee. it takes about 10 Minutes and after this youre pda runs as well. dont forget to copy youre original ROM-Image with the original Installer after finishing this procedure to avoid any errors.
Well, i hope this tutor will help you. i´m interested for.
[email protected] youre own risk.
Dead XDA II
Hi Guys, I'm new to all this because my XDA has never failed me, until now. I too tried to upgrade the ROM, realising too late that the upgrade from a UK site was not meast for the Asian zone.
Anyway, I tried downloading the following link:
http://rapidshare.com/files/36498840...adeUt_noID.rar runterladen.
When I tried to lanch the file it tells me that RUU.dll is missing.
Is there a link that works or is there a fix for this? As I said, I'm new to this therefore need step by step instruction.
Hope someone can assist, I'm lost without my XDA II.
Thank you
Ben
cannot download from the link
hello
I have a black screen on my qtek 2020i (XDA2i) after upgrading the ROM, and I saw that the solution you are providing works good, but I cannot download the fix using the link
please advice
http://rapidshare.com/files/36498840/MaUpgradeUt_noID.rar
XDAII Dead
hi,
ive put my MDA into the cradle and get the Serial screen to change to a USB screen. ive downloaded the file and put it with the rom upgrade that i got frm T-Mobile. when i run the program on my computer i keep gettin "Connection Error" screen. what should i do.
pleas advise.
m1000 dead sad
i regreat to say i did try for update my spv m1000 today but my got died now when i tried i did conntect my ppc with ppc via bluetooth actvesync when i run HimaUpgradeUt.exe then a window open and shows mgs wait 30 minunt but after even 1 minunt got error also my phone got stop like dead and screen shows on top serial and on bottom it shows v1.3 i realy .sad. becouse now i cant reeboot also even ui have not data cable any body help me plz what i do now ?
thanks for my help
really want to say thanks who helpd me i upgraded now my spv m1000 my self without any problem becouse i brought data cable of i mate and its workin fine with my spv m1000 yahooooooooo xda roken
usman_hussain1987 said:
hi,
ive put my MDA into the cradle and get the Serial screen to change to a USB screen. ive downloaded the file and put it with the rom upgrade that i got frm T-Mobile. when i run the program on my computer i keep gettin "Connection Error" screen. what should i do.
pleas advise.
Click to expand...
Click to collapse
Hi Usman,
What OS of windows PC do you use? it can't work with windows vista. Try to downloads new version of active sync then try it again. The upgrade is specify, can't work in any kind of devices