I tried to uprgrade to 2003Se 2.02 and since that my qtek is dead, I think so.
when i try to make a new upgrade from bootloader mode /v1.01. the procedure stops after 99 %
any idea ??
please help me, every body tells that qtek cannot die, I want to see
have you changed the operator settings to qtek? are your language settings the same? e.g. WWE?
please use a fast win XP computer for upgrade.
Related
Hai,
I'm calling for your help because i wanted to upgrade my mda2 with this file: ruu172126wwe_imate.exe
that i just downloaded from this site....
but i got an error and on my screen I can only see the tect Serial v1. 03 and when i put it on my cradle it sais USB v1.03
What can I do..
Please help me :roll:
Hi,
I'm no expert, but I have upgraded my MDA2 sucsessfully. Have you tried to upgrade it when docked in that state?
Or maybe you will have to upgrade using other methods, like through SD card or serial/usb... Please research on this forums for further details.
One thing that I can almost assure you, your MDA2 is not dead! if you see the Serial/USB interface or bootloader then you have a chance to revive it... :wink:
Good luck...
Rayan
Hi All, Please please could anyone help me I have just tried to update my xda2 with the o2 update software (latest) and all the screen will display is serial v1.6, I cant do any reset Hard or Soft!! Should I buy a body bad and call the undertaker?
Let it on the craddle and start to update it again!!!
Hi, I tried that and get ERROR 100 Message?
Thanks
sorry, bro !,
but from where you have tried to update software latest from 02??. (website)
thanks
ajong
Hi Yeah from o2 UK.........
Thanks for your reply
still problem bro ???
try this :
- push together (power+navikey+reset)
-put your device in to cradle
-start upgrade again (from original 02 rom)
- wait 2-3 minutes.
hope this helps !!
-------------------
which one version to upgrade !!
1.60.50 ???
@soulexpress: Don't forget to kill activesync before yoy retry the update.
Does the 'serial' change into 'usb' when the device is in the cradle?
Hi
Just had to hard reset my XDA II as it died and wouldnt respond. I have the message above.
If I put it in the cradle, it says ' USB v1.01' if I take it out it says 'serial' other than that I cannot get it to do anything!
HELP!!!!!!!!!!!!!!!!!!!!
thanks
rich
mmm, seems youre in bootloader mode.
Only way out I know of is to reflash the device.
Dont forget to kill activesync before you do that btw
ok - thanks
but i dont understand, if i download the rom to my pc, surely i need activesync connected to transfer the file to the xda?
what do you mean by kill it?
also what version should i download?
sorry for my lack of pc skills1
cheers
rich
The upgrade package takes care of communicating with the device.
Activesync is not used and would only interfere.
To kill it: ctrl-alt-del, then end "wincemanager.exe" (not exactly sure of the name) process.
The rom you should use is preferable one of your current supplier: 02, T-Mobile, Qtek or CDL (iMate).
I would advise a non-beta 1.72 rom
These are officially available for iMate and QTek devices (search on RUU172*).
I created a good (to me!) 1.72 rom for T_Mobile devices, search on RUU172901*
Is it worth upgrading
I am running 1.60.00WWE on my XDAII is there any real advantage of upgrading to 1.72 ? What are the advantages?? If so which should I use? I Swapped over to the TMobile one a while and I believe it is difficult to change back to the O2 version, have you any comments?
Thanks Adam
Is it worth upgrading
I am running 1.60.00WWE on my XDAII is there any real advantage of upgrading to 1.72 ? What are the advantages?? If so which should I use? I Swapped over to the TMobile one a while and I believe it is difficult to change back to the O2 version, have you any comments?
Thanks Adam
£50
Money
£50.00?
What's going on?
you wouldn't get that for your body!!!
??????????????????????
I tried to upgrade my imate jamin s200 to smart1_wm6_pp8mb. since the operation did not finished I unplugged the usb cable, therefore the machine didn't work and opening now. now some messages are appearing on the screen (IPL:2.15.0001; SPL 2.15.0001; GSM 02.19.21; OS:10.1.0.811)
i need your urgently help... How can i fix it this problem and upgrade my rom again?
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Thank you very much, could you plase upload here i cant find the last update ,
i''m waiting you..
i dont know what is my qtek last update How can i learn it?
When you want to know what ROM you have flashed to your device, go to Start -> Settings -> System -> Device Information! Here you can find all information you need!
By the way: the latest Qtek update for the S200 is 2.20! You can find it trough Gooogle or the board search! Good luck!
animelover said:
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Click to expand...
Click to collapse
Hi animelover,
Just a question...Do you use the OS extract tool to flash only the os without changing the IPL/SPL, or the roms that you wrote about have no IPL/SPL upgrade? I mean did you fash directly or you flashed only the extracted OS?
Thanks!
Maybe this thread already been posted, please help me!!!
I took Qtek S200 used one, and the old host said he had problem with upgrade. I can't upgrade myself, and give it to master, master can't solve the problem, but when I came back and put it to upgrade with "220734 WWE ship" version it did well and I had working device for week, then it freesed once more, since I can do nothing. initially it has IPL 2.09.001 and SPL 2.20.0001, I did the program posted here - IPL upgrade and now I have IPL and SPL 2.20.0001. Phone enters bootloader normally, upgrade only with "220734", others doesn't go. When I switch it in normal mode it freeses as white screen on "Windoes mobile" screen, sometimes it goes further but final picture one - freesing.
Wait for Your advices.
P.S. In my city no official cervice...
Try a different ROM...
Put the device in bootloader,disable connect through USB in active sync, and run the RUU from a different ROM...
http://forum.xda-developers.com/showthread.php?p=3909674#post3909674
HERMES (htc tytn) UPGRADE FAILURE
REPORT
Hi all of you!
I have a Hermes (HTC Tytn/ Orange SPV M3100) and i succesfully tried a lot of ROM’s until these days..
But, this happened:
During upgrade of a ROM, i made the mistake to disconect the device from the PC..
And, now the problem is that i can’t boot ANY OTHER ROM!
I can enter to BootLoader , where i see
HERM100
I PL – 1.04
HERM100
SPL – 2.03
ALSO, i CAN connect to PC (it displays „usb” & i see it on Device manager)
(PC run Vista Ultimate 64 bit).
But, when i try to upgrade ANY ROM , the process starts, BUT STOPS at 0% ? .
I searched & read 4 days for a SOLUTION to make my phone alive again..
Can anyone tell me what to do?
Is a REAL solution for this issue?
Please reply.
Thanks!
i GUESS YOUR BATT IS ALMOST DEAD!
Hi dude... does your batt is higher than 50%? the process will not continue if yuour device is under 50% maybe it is beacause you cant charge it in Bootloader. keep it higher than that... if not the case... i guess you will ned to clean it with mtty....
Just search something like that... im for sure there is a way to make it... use the stripped att rom
AND TRY WITH IT ALWAYS!!!
never but never! when you got a problem in upgrade NEVER do a hardreset.... just softreset... keep it on mind... try an XP machine get it wherever you need to get it!
thanks
..a lot for the reply!
i tried on a XP-PC, because mtty don't work in Vista (Ultimate x64)
i followed ALL the instructions..BUT..
..the problem persists!(
thanks for the idea of battery i will try again, with full of..
also, i will try some ROM's without radio's..hope that help..
BTW:
in mtty shows that the device is CID locked with:
"ORANG008"
i downloaded the last ROM for Orange 008, and tried of install...BUT..nothing!(
any other sugestion, please?
thanks again!