Related
Hi Folks,
I'm using iMate pocket PC which i bought from India. Its awesome while sync with my exchange server and get me entire mailbox of mine to the device.
I also want to check whether i can enjoy the WM2003SE on this device. I have been reading quite a few posts on WM2003SE for XDA here (i'm not sure whether this is the right forum to talk bout the iMate; however, i tried coz i seen a category for HTC).
I know for sure that the vendor has not yet published WM2003SE for iMate PPC. however, Could anybody please let me know if i can upgrade my iMate to WM2003SE (i'm crezy about it and a couple of days back i just decided to use one of the upgrade from this site and somehow cud hold myself as i cud not predict what its going to do with my device ). If its possibel, from where shall I get the upgrade?
thanks in advance.
Ketan
WM2003SE update link
Hi,
to download an update try this link:
http://forum.xda-developers.com/viewtopic.php?p=78298
But г need to be logged in!!!
Cheers.
Hi Columbus,
thanks for the response,
Wud this upgrade work with the iMate Pocket PC from India?
thats what is the concern for me. I have seen threads where we need to modify the .nbf files for the operator / country codes. Do i need to modify the .nbf file for this upgrade?
thanks.
ketandp said:
Hi Columbus,
thanks for the response,
Wud this upgrade work with the iMate Pocket PC from India?
thats what is the concern for me. I have seen threads where we need to modify the .nbf files for the operator / country codes. Do i need to modify the .nbf file for this upgrade?
thanks.
Click to expand...
Click to collapse
From Today screen, goto START/Settings/System/Device Information.
What's your ROM version/date, Radio version etc?
You can search and check out DCS posting on how to check the operator code on the .nbf files and your devices.
Alternatively, if you are not too worry about changing the operator code (since the upgrade to WM2003SE voids warranty anyway), you can run the upgrade only with HimaUpgradeUt.exe (remove the HimaGetDeviceData.exe and HimaClearJumpCode.exe).
There exists many tutorials/tips from people who have tried the upgrade, so have a good read and copy the important tips.
Some general tips from me:
(a) Backup all your important data (calendar schedule, docs, contacts etc)
(b) Be mentally prepared to spend quite awhile doing the upgrade. Smooth upgrade -> 1-2 hours, Error-prone upgrade -> 1-2 days.
Do not rush, or you will find that 99% of the time, the error happens because you are careless. Always clarify, clarify, clarify.
(c) If encounter errors, copy the sequence of events, EXACT error messages, search for similar errors reported here. If unable to find, post your errors to request for urgent help!
(d) Also, if you have the luxury of a spare phone, keep that handy in case your mobile phone connectivity is indispensable to you.
(e) If all else fails, be prepared for a downgrade back to the original ROM. Remember to download the original WM2003 ROM package as well.
good luck!
Hi,
I coud upgrade it successfully. Thanks for all ur help. However, I cud not see the ext. ROM installed!! I dont even see few of the programs there like, Camera is not there ,,, there may be more programs missing. Can anybody tell me where shall I get a god Ext ROM or a well coocked 2K3SE ROM for iMate - asia with Ext ROM which I can reflash?
Thanks
ketandp said:
Hi,
I coud upgrade it successfully. Thanks for all ur help. However, I cud not see the ext. ROM installed!! I dont even see few of the programs there like, Camera is not there ,,, there may be more programs missing. Can anybody tell me where shall I get a god Ext ROM or a well coocked 2K3SE ROM for iMate - asia with Ext ROM which I can reflash?
Thanks
Click to expand...
Click to collapse
Hi.
Did you install both files? I didn't have any problems with upgrade, except sms problem. I solveâ it finally.
Cheers
Hey,
I just ran the himalayut.exe and i'm sure there was no ms_nbf file in the directory
So, I beleive the ext ROM was not present and its not installed.
Can anyone give me a good ext ROM which i can use to with my iMate (asia)?
Thanks.
finally i got the most turn off things i faced in 2005 to back me up to 2003 but after i installed 2005 for the 4th time & desided to stick with it untill i either solve the problem or microsoft will post solution
1. Etisalat Settings for mnet & MMS
(everytime you install them they somehow crash the original DB of messaging where you will not be able to open your mesages anymore untill you do a format
2. and most importantly Arabic reading writing
after long time spent to fix those problems i finally got them working, see screen shoots
yeah ok , great but how u fixed the issues ?
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Rabia said:
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Click to expand...
Click to collapse
Post a cab or tell us what you modified in the registry!!!
Waiting, thanks! :?
Oh something else I noticed the radio rom is 1.08.00, can you dump it?
PC) folder, take a copy of your registry after pasting the file & before softreseting the the device, then reset your device, if it will ask you then if you want to run few DLL files acept all of them, then take another copy of your registry & store it in a differant file, now go to your programs & you'll find arabizer file there in which one of them is english name, another one is arabic as '7ayarat & the 3rd one is arabic letters but mirrored in reverse, this will be always your indication if arabic is now working fine, click on this file, it will load couple of other DLLs but will give you some error message about an AOP????? file, don't mind it, now got to your control panel, (Setting) of your mobile & go to the settings Tab, again it will ask you to load some file.cpl say yes, soft reset your device with a software for soft reset not through the pen, then it will load, if you get an error about some file couldn't be loaded just reset few times & it should work, if you lost you signal in gsm, load the first registry file & softreset your mobile again, it will ask you to load some dll file again accept them then go to the settings to load the cpl file, then reset , if this doesn't work load the second resitry file & do the same proccess untill the file with the names reversed is corrected, now enjoy arabic on your system.
اود التنبية على انني لست مسؤلا عن اي مشكلة تطرأ على جهازك و العملية متعبة جدا
PS. if some get this way working for him i please him to put it in a simplified way because unfortunatly i have too little time to spare on rewriting it in an organized way, but once it worked i had to post it here because this is the best site in the world for PPC's & they deserve the best
Thanks mate I'll give a try later on
now that's interesting , thank u
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
guys i heared someone tried it withought backing up the registry & it worked perfectly fine, remaining only is the camera & record button & this should be it for me
i think the camera is the last problem , buttons are working fine 8)
Rabia said:
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
Click to expand...
Click to collapse
sadly it didnt work for me,the device kept hangings on the splash screen,I tried it with wireless on and off, i did hard reset 5 times (2 with clear registery option) but nothing worked,I also upgraded to Radio 1.17 but still didnt work,I couldnt find out what's going wrong (I get prompt to overwrite 3 files while copying them into windows folder) WM2005 1.50h, Radio 1.14 then 1.17
well am not sure but regarding the hard reset only do the clear registry hive option without the format,
hi guys!
we are working for the localize Himlaya WM5.0 to Chinese and Japnese.
On the previouse OS, we need Font and registry, and also need wince.nls which support to encoding to our languages.
without replacement wince.nls, the inbox and IE cant encode to ours.
Usual, we got the wince.nls which has our lamguge support from the device of Japanese or chinese, or take from SDK emulator, or make it ourseleves with MS Platform Builder.
Till the version of WM2003se, easy to replce it.
But new OS of WM5.0, replacement of wince.nls can not be effected, even it was replaced firmly. the OS seems to be ignor that!
@On the Himalaya WM5.0, Some version such like 1.6b, 1.6h, 1.6i can get encooding with new wince.nls, but other version of WM5.0, it was not be able...cant find the reason yet.
@On the Blue Angel WM5.0, also it was ignored by OS
@On the Jasjar just we got, also it was ignored..........
We need find some solution of this system which ignore the replacement of wince.nls.
i already work for that more than 5days ........
I think to localize to Alabian, you guys will have same problems.
Example some of you can replace wince.nls, some of you can not get it.
so if you got some information, please exchange it about that, of course we also let you know if we got it!
Thanks guys!
following is our thread about localize to Chinese / Japanese..
You may know what happened on new OS.
http://forum.xda-developers.com/viewtopic.php?t=24781&highlight=
here it is guys
did it
check it out
http://forum.xda-developers.com/viewtopic.php?p=160111#160111
1.6c
yes. I am using WM5 1.60C WWE, I can not replace the wince.nls in rom with new one.
this is again a simplified version of installing arabic in your WM2005, just install both attached cabs in there sequence & everthing should be working fine
PS am not resposible if it crashes your device but so far it haven't crashed min
to Replacement wince.nls
PLS install this cab,
and place your wince.nls onto \Temp folder
then soft reset. you can replace wince.nls
<exactry saying, not relace.enable to read wince.nls from \Temp frolder>
Rabia, what's so different about your arabizer version?
ramram said:
Rabia, what's so different about your arabizer version?
Click to expand...
Click to collapse
its the same as my earlier version but before people comlaint about arabic keyboard not getting installed & the need of using a 3rd party arabic keyboard for it to work, also some people had trouble over writing few files & so HOPFULLY this makes the installation far more easier untill Mr Imaginet company decides to develop a fully intergrated 2005 arabizer
Imaginet already created the arabizer for 5.0, but they didn't release it yet as you can see in the JasJar arabized version, we have a new built of arabizer
hi
for those of you who don't know, the israeli phone have hebrew (and MUI) support from a software called Eiron (it is installed from the extended rom). this software is also responsible for the sim-lock in these phones, Israeli carriers do not use the internal sim-lock feature. This is why israeli wizards (they are sold here as K-Jam) can't be unlocked using lokiwiz.
This is a G4 wizard, so it can't be CID unlocked (i didn't totally understand what it means.. does it mean that i can't change the content of the extended rom?)
I did a very simple thing to bypass it. I did a full hardware reset and when the extended rom was about to start installing everything, i did another reset, which stopped it from running. it didn't try to run again on the second hardware reset.
Viola, i can use a sim card from another carrier. but i lost the hebrew support.
Then, using wizard service tool, i un-hid the extended rom. attached is a list of the files on the extended rom that i copied to my computer. now i can install only the files that i want. I'm getting to the question...
Can anyone take a look at the list (i can send the files if needed) and try to guess by the names of the files, which file is what? which file i should install (maybe it's a fix or upgrade which is necessary) and which file should i skip to keep my k-jam as clean as possible and simfree (of course)?
just a hint, the only two softwares that can be uninstalled after the extended rom finished running, are CA antivirus and Eiron (the hebrew and MUI support).
I guess someone with experience with pda's could answer it in a second... I tried to read the wikis here, but it seems like i have A LOT to learn before i have enough knowledge to understand these names...
Thanks a lot.
Roy.
hey all!!
i'm from Venezuela and i recently purchased a HTC PPC6800 (cdma) and my carrier here didn't activate the GPS...
I'm not new to windows mobile but i'm totally new to ROM upgrading...
the only thing im affraid of is not being able to make calls after the upgrade... since i'm from Venezuela i can't use Sprint configuration...
so here's my question:
WHAT DO I HAVE TO BAKCUP FROM THE FILE "EPST" SO I CAN SET IT UP AFTER THE UPGRADE???
i'll be very much appreciated if any of the Senior members could help me here...
thanxs!!!
Nelson
HTC PPC6800
Caracas - Venezuela
Movilnet
Nelson, there is a few month old utility that can extract an HTC ROM from the device directly to the SDcard. If you have the ROM (*.nbh) of your phone from your carrier then you could use a utility such as DogGuys Kitchen maker to decompile the ROM. What you usually only need is contained in the ..OEM\OPERATORS directory.
If you look at how existing kitchens (and a FAQ on kitchens) are set-up, you'll see that each carrier tends to have its own operators OEM that the end-users selects when building their ROM. Following those templates you can create your own with the files specific to your carrier, and add that to an existing kitchen. Once done, then you can then build your own ROM. Though, with that done, of course the language files for your new OS ROM will be english rather than spanish.
The other possible option is to provide your carrier's OS ROM to the forum here and one of us may have the chance to decompile the necessary files and provide a set-up for you.
...sorry, I'm travelling right now and don't have the chance to go into greater detail or updated links.
whoa! I think u went way over his (and my) head with that one...
I don't think he's looking to cook his own rom, he just wants to install one....and wants to know what info he needs to document before so he can reinstall it properly afterwards..
wow thanks Keystone...
although Dillsnik is right... i read the FAQ on kitchens an it doesn´t sound complicated... but i´m not sure if i´m capable of doing this...
however i will be reading more about this kitchens and cooking my own rom because it sounds very interesting that i can put only the programs i want (wich by the way it´s exactly what i´m looking for), so i´ll be witing here soon asking more questions...
by the way, the main propuse of this thread is still open... and the quistion is in the first post:
WHAT DO I HAVE TO BAKCUP FROM THE FILE "EPST" SO I CAN SET IT UP AFTER THE UPGRADE???
thanks for the quick response!!!!
guys, installing the official Sprint rom before your rom of choice allows your carrier settings to be maintained, so there is no need to back up any of that information. at WORST, you'll have to get your a-key reset, which is a quick call to verizon(or your carrier?). i've only had to do this once, and i've flashed my phone probably 25 times.
install olipro 2.4
run Official Sprint RUU
at 'Tap Here to Set Up Your Device' install your rom of choice
run carrier cab (if its not in the kitchen)
if you try to make a call and receive a 'your phone cannot be authenticated' message, call tech support and dont let them tell you anything, just say 'i had to do a hard reset and now my phone cant authenticate i need a new a-key please.' theyll tell you that its not necessary and will try to do it automatically, then if they cant theyll give you a new a-key and tell you how to apply it.
EDIT: there is no way to view your a-key, which is why you are unable to back it up and why backing up EPST settings is pointless for you.
nelsongruebr said:
wow thanks Keystone...
although Dillsnik is right... i read the FAQ on kitchens an it doesn´t sound complicated... but i´m not sure if i´m capable of doing this...
Click to expand...
Click to collapse
Well, I think Keystone is trying to give you a safeguard. You likely have a ROM that nobody else has a copy of here, and I'd suggest you dump a backup copy of it before you do anything to your device, just in case.
WHAT DO I HAVE TO BAKCUP FROM THE FILE "EPST" SO I CAN SET IT UP AFTER THE UPGRADE???
Click to expand...
Click to collapse
We cant give a definite answer to that because we do not know how your carrier operates.
In theory, the actual Sprint update should backup your programming and restore it for you. I do understand you wanting to have a backup plan, but in that case, I would suggest you record everything.
Hi Kids,
My wife just got home from Hong Kong with a HTC HD2 phone with what i think was windows in chinese (i think this could be switched th English) and in turn this could then be switched to Andriod in English.
Now I had not asked for the phone so had no idea what Andriod was or any of the rest of it.
I am not sure how the wife did it but when she was do something she lost the ability to switch to Andriod and in trying to reset it I think she has done a factory reset so it is now Chinese OS with nothing else on it no Andriod nothing but Chinese OS. on the one hand she is Chinese so not bad for her but I have been trying to change the OS to UK and start again.
I first looked here http://forum.xda-developers.com/showthread.php?t=591314 but that was a bit over my head and then ended up here http://forum.xda-developers.com/showthread.php?t=606713
but i have no idea what a RUU_signed.nbh having looked further there is talk of original ROMs cooking and kitchens. Is the original rom a disk that came with the phone ? i dont want to try anything as i have no disk and dont know how to get the original ROm. I really am lost now I will do some reading but I have really been thrown in at the deep end is this tech is completely new to me.
thought please
Even a factory reset won't have deleted the Android folder from the card. Find File explorer. Find the Storage Card and there will be a folder called android. Tap the file called CLRDAD - nothing will happen, don't worry. Then tap the file named haret and wait - Android should boot up the way it was.