help i have unlocked my xda rom vesion 3.17.3 radio vesion 4.21.00 protocal32s54 but it will not acept any other sim it just says no signal if u try to set network it says unable to read settings from network this is on oringe it work on o2 ok ta very much :?
Which method of unlock did you use?
the one on xda developers .coms rom up date :roll:
Try entering bootloader then push the button below the antenna, choose the 900/1800 band and see if that changes anything.
:? how bo i enter bootloader as i am new to this cind of fing ta
To enter bootloader, push stylus in reset hole while holding power button down. Then push the button below the antenna. You can choose from there your gsm band.
i tryed wat u told me to do and sadly itdid not work iset the gsm to 900-1800 but still no signal on oringe even though we r near to a mast and my own nokia has ful signal any more sugestions wold be apresated ta
Related
i had my first xda and was very happy to have one until this morning. i upgraded my 2002 to 2003 and setting it up for easy use.
while i was changing the phone settings i checked the 1900 north america network setting. and restarted my xda. untill then i cannot be able to use it as a phone because the network of my country is 900 europe.
i am trying to enter the phone settings but it doesnot respond.
can anybody help me to solve this problem? i am really locked right now...
Try to go to the GSM menu in the bootloader ... select the right band and soft reset ... you can get the GSM menu by pressing the Calendar button while in the bootloader mode.
Good luck ...
i am really very happy to have such an informative answer from you. but as i mentioned i am a new xda user and donnot have any idea of what the bootloader is.
can you please give me a detailed information of what i need to do?
all you need to know i suppose (know about getting in and out of the bootloader anyway )
http://wiki.xda-developers.com/wiki/ChangingBandsWithBootloader
the problem solved by your detailed helps.
thnk you all for your kind helps.
it is really nice to know there are some friends trying to help.
now i can use my xda...
Have the same problem - but still "no signal"
Hi
I have the pw10a device and had the same problem with my device after palying with GSM bands [tried to use in north america].
I tried all options in the bootloader both 900 and 900/1800 and after reset - it still do'nt wrok.
Can you help ? :roll:
I live in greece and have a vodafone sim.The phone is unlocked and worked perfectly.
Today i tried to put another sim and it didn'y read it so i tried to change the band (to 1900 from 900) nothing happened.
So I wanted to restore the band but then i realised that i couldn't access the band tab because it wasn't there.
There are no phone settings to change
I tried a hard-reset but nothing changed
Now every time i try to reinstall the T-mobile ROM 4.00.21 i get an error message telling me something about the connection while the same time activesync is on.I put the rom in the SD card but nothing appears.
I'm depressed and don't know what to do
Is there a way to change the band to 900
If not how can i install the same ROM or an older one.
I'm crying for help
Please help!!
1)In case i forgot now it has 1900 band selected
2)when i open thephne it says something to turn on the wireless radio and prompts me to enter a code i think what do i do there
Other times the phone wont open at all
Use the GSM band selector from the boot loader GSM menu
Could you please tell me the steps to do that.
I'm not very experienced with these thing.
The more you analyze the easier for me.
to get into the bootloader
you softreset the device while holding
down the power button
i got in the bootloader then...
IT says :
WALLABY Bootloader V5.15
GSM OK
By pressing action :
GSM TURN ON
already on reset
???
Hello guys, Please i need some help with my X02T (TG01 from SoftBank).
I flash my phone with T01A ROM, using the "TG01 to T01A ROM Converter" and pin mode, now my phone have DOCOMO boot logo, and my SIM-Card from SoftBank dont work (ask for unlock code), soo i buy a Universal SIM Unlock (hypersim) and try use with ROM radio 5005.1700.05, and the phone work fine for 1 day.
Phone, internet and SMS work good, but in roaming mode, and after 1 day i lose the signal, and cant connect again, and when i try manual connection and choise SoftBank i get this Message: S.O.S / Emergency calls only.
Soo i put my SIM-Card (SoftBank) inside my old HTC Hermes, without Hypersim (my Hermes dont need it) and cant connect too, but when i change for manual and choise Vodafone JP (SoftBank) it work normal again, i can connect with phone, internet, sms, all.
I flash my X02T with another ROM, this time i choise radio 5005.1600.05, put my SIM-Card with Hypersim again and this work fine again but still in roaming mode, phone and internet work good, but can only send sms, can't receive, and after less 1 day signal dead again, and get the same error: S.O.S / Emergency calls only
Plz i need help with some questions:
1 - Why i can only connect in roaming mode, if i just use a SoftBank SIM for connect with SoftBank network?
2 - Why can only use the phone for 1 day?
3 - Since my Boot is DOCOMO, i can use a DOCOMO SIM without hypersim?
4 - If i buy a unlock code, my SIM-Card will work withou a Hypersim?
5 - If i flash ROM with another radio the phone will work again?
Thanks for help guys. All help is welcome
Please i forget 1 ask, if i buy a better Universal SIM Unlock (like Iphone unlock 2.2), this will fix my problem?
any one know if T01A need a Universal Sim Unlock after flash ENG ROM?
my phone works fine with any rom and there's no need of unlock code...
Hypersim simulates roaming, so you have roaming icon on status bar.
If you have problems with hypersim, get Nokia BB5 phone and turn it on with your simcard and hypersim then make call, receive sms, etc. Now it should work with tg01 too.
I make a new test with my japanse ROM radio 5005.1901.20 (SoftBank ROM with DOCOMO Bootloader) and works good now, used for 3 days and signal is good.
I think the radio is the problem, is possible get a ENG ROM and change radio for 5005.1901.20?
HI, eethecat would you be so kind as to share with us the japanse ROM radio 5005.1901.20 (SoftBank ROM with DOCOMO Bootloader), I bricked my x02t with flashing a chinese WM6.5 ROM. Now I can power the phone by shorting Pin 1 and 2, after that, I insert the softbank sim card, seems no sim card installed on the signal bar. Thank U in advance for your help.
lazy7811 said:
HI, eethecat would you be so kind as to share with us the japanse ROM radio 5005.1901.20 (SoftBank ROM with DOCOMO Bootloader), I bricked my x02t with flashing a chinese WM6.5 ROM. Now I can power the phone by shorting Pin 1 and 2, after that, I insert the softbank sim card, seems no sim card installed on the signal bar. Thank U in advance for your help.
Click to expand...
Click to collapse
My is the same, i need use a Hypersim for make phone work, but only for few hours...
eekthecat said:
My is the same, i need use a Hypersim for make phone work, but only for few hours...
Click to expand...
Click to collapse
hi,
wich one Hypersim you are use now ? how about i-Smart Hypersim ?
My one is NTT DOCOMO. But now i can flash Softbank Rom then use Softbank phone ? Please tell me how to do ? thank so much for your help !
Very best regards.
hi there, my atrix does not want to register at operator.
My phone was always trying to use 2g cause of better signal.
I went to Admin menu (*#*#4636#*#*), changed to WCDMA preffered, but in about a minute it did not change. I tapped function key and then Select Radio Band, it was only USA - i tapped it.
So he do not even try to register at any operator.
but i can call 112.
there is no any band other thsn USA.
Our band are almost same
900/1800/2100
So at least some operators must register.
may be i can refresh the modem part via bootmenu?
Or is there a way to reflash the modem part?
thanx
motrola forum - https://supportforums.motorola.com/message/353262 same situation, but with other ppl.
i found a solution...
1. backup via CWM
2. phone reset
3. restore backup.
WELL I KNOW I DID A HUGE MISTAKE AND I M AN IDIOT AND I HAD TO READ THE INSTRUCTIONS FIRST
i had the "NOT RECOGNIZED SIMLOCK CERTIFICATE" but i tried to unlock my boot loader using the-laser's (x10_bootloader_unlock.exe)
and now i ve lost my signal
when i look for network operator it give me all of them. but it cant connect to my netork operator .sim toolkit is still working
it look like he dont recognize my sim card . WHAT SHOULD I DO
ps : pccompanion dont work
You will need to contact @THE-laser to fix that for you. One price for both unlock sim and bootloader.
are you saying that i should unlock my sim ?
!!!!!!
Relock your bootloader. What tool u use to unlock?
Sent from my Desire HD using xda app-developers app
karimwac said:
WELL I KNOW I DID A HUGE MISTAKE AND I M AN IDIOT AND I HAD TO READ THE INSTRUCTIONS FIRST
i had the "NOT RECOGNIZED SIMLOCK CERTIFICATE" but i tried to unlock my boot loader using the-laser's (x10_bootloader_unlock.exe)
and now i ve lost my signal
when i look for network operator it give me all of them. but it cant connect to my netork operator .sim toolkit is still working
it look like he dont recognize my sim card . WHAT SHOULD I DO
ps : pccompanion dont work
Click to expand...
Click to collapse
Wow..... That was a mistake. But however, you should lock your bootloader back, Another thing you can try, BEFORE you search for a way to lock your bootloader is making sure your phone is actually "Unlocked" Sometimes you run a risk when you unlock your bootloader that your phone "Re-Locks" Witch sucks, and is another complete pain in the butt battle. But its the price you pay for not paying complete attention to whats going on. Go through them steps and get back to me.
saying tyvocc
And how to relock it ? can i have a tuto or something ?
i tryed with setools it says : nothing to restore
I have x10i and i have done the bootloader unlock with flashtool, but no matter what sim i put in they can all find networks... but none will allow access to networks no matter what sim. Im from SA and i every time i reboot im asked to insert sim... already have... and on boot please insert simcard and restart. Might i add that i put my wifes vodacom sim in and no luck... i put one of those red voda sims in which is blocked then on boot it is recognised but the sim stops the boot requiring a puk number cause the sim is blocked. But my point is that the sim is noticeably recognised and wont boot the phone further unless puk code inserted. But even so i want the phone open to all networks. I have messed round with s1tool but when it tells me hold control then choose firmware im lost... cause i push control and nada happens. I see there is generic for za and sa and there is a voda sa branded one when i use flashtool to run that. I have used all the sa versions i can see or am aware of... could i be missing something... im using generic world firmware version 2.1 update 1, Kernel 2.6.29, Baseband 2.1.54 and build number 2.1.A.0.435... so what to do?
Sent from S3Terry, Galaxy SIII GTI9300, using 8ta/Telkom Mobile.
How to re-lock a bootloader !!!!!!!
Same problem with me
To re-lock the bootloader you are going to have to download the latest flashtool and use the restore option. In some cases this has helped some people get their network back but in others not.
I am one of the unfortunate ones. I also have an x10i which i have recently aquired from a friend but after upgrading to 2.3.3 it has somehow lost its ability to read any sim card i put in it. There is absolutely no network lock on it at all and i see grey signal bars as if network is there but it never ever registers a sim card and permently stays on emergency calls only.
My phone i do believe was on a contract from t-mobile in germany but if i type *#*#7378423#*#* in to the keypad it quite clearly states that their is no locks on it at all.
I am quite clearly baffled as to why this is happening on an unlocked phone, and if anybody who reads this can help please send me a message